344 lines
		
	
	
		
			8.2 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			344 lines
		
	
	
		
			8.2 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| /*
 | |
|  * Watchdog driver for the K3 RTI module
 | |
|  *
 | |
|  * (c) Copyright 2019-2020 Texas Instruments Inc.
 | |
|  * All rights reserved.
 | |
|  */
 | |
| 
 | |
| #include <linux/clk.h>
 | |
| #include <linux/device.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/mod_devicetable.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/moduleparam.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/pm_runtime.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/watchdog.h>
 | |
| 
 | |
| #define DEFAULT_HEARTBEAT 60
 | |
| 
 | |
| /* Max heartbeat is calculated at 32kHz source clock */
 | |
| #define MAX_HEARTBEAT	1000
 | |
| 
 | |
| /* Timer register set definition */
 | |
| #define RTIDWDCTRL	0x90
 | |
| #define RTIDWDPRLD	0x94
 | |
| #define RTIWDSTATUS	0x98
 | |
| #define RTIWDKEY	0x9c
 | |
| #define RTIDWDCNTR	0xa0
 | |
| #define RTIWWDRXCTRL	0xa4
 | |
| #define RTIWWDSIZECTRL	0xa8
 | |
| 
 | |
| #define RTIWWDRX_NMI	0xa
 | |
| 
 | |
| #define RTIWWDSIZE_50P		0x50
 | |
| #define RTIWWDSIZE_25P		0x500
 | |
| #define RTIWWDSIZE_12P5		0x5000
 | |
| #define RTIWWDSIZE_6P25		0x50000
 | |
| #define RTIWWDSIZE_3P125	0x500000
 | |
| 
 | |
| #define WDENABLE_KEY	0xa98559da
 | |
| 
 | |
| #define WDKEY_SEQ0		0xe51a
 | |
| #define WDKEY_SEQ1		0xa35c
 | |
| 
 | |
| #define WDT_PRELOAD_SHIFT	13
 | |
| 
 | |
| #define WDT_PRELOAD_MAX		0xfff
 | |
| 
 | |
| #define DWDST			BIT(1)
 | |
| 
 | |
| static int heartbeat = DEFAULT_HEARTBEAT;
 | |
| 
 | |
| /*
 | |
|  * struct to hold data for each WDT device
 | |
|  * @base - base io address of WD device
 | |
|  * @freq - source clock frequency of WDT
 | |
|  * @wdd  - hold watchdog device as is in WDT core
 | |
|  */
 | |
| struct rti_wdt_device {
 | |
| 	void __iomem		*base;
 | |
| 	unsigned long		freq;
 | |
| 	struct watchdog_device	wdd;
 | |
| };
 | |
| 
 | |
| static int rti_wdt_start(struct watchdog_device *wdd)
 | |
| {
 | |
| 	u32 timer_margin;
 | |
| 	struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
 | |
| 
 | |
| 	/* set timeout period */
 | |
| 	timer_margin = (u64)wdd->timeout * wdt->freq;
 | |
| 	timer_margin >>= WDT_PRELOAD_SHIFT;
 | |
| 	if (timer_margin > WDT_PRELOAD_MAX)
 | |
| 		timer_margin = WDT_PRELOAD_MAX;
 | |
| 	writel_relaxed(timer_margin, wdt->base + RTIDWDPRLD);
 | |
| 
 | |
| 	/*
 | |
| 	 * RTI only supports a windowed mode, where the watchdog can only
 | |
| 	 * be petted during the open window; not too early or not too late.
 | |
| 	 * The HW configuration options only allow for the open window size
 | |
| 	 * to be 50% or less than that; we obviouly want to configure the open
 | |
| 	 * window as large as possible so we select the 50% option.
 | |
| 	 */
 | |
| 	wdd->min_hw_heartbeat_ms = 500 * wdd->timeout;
 | |
| 
 | |
| 	/* Generate NMI when wdt expires */
 | |
| 	writel_relaxed(RTIWWDRX_NMI, wdt->base + RTIWWDRXCTRL);
 | |
| 
 | |
| 	/* Open window size 50%; this is the largest window size available */
 | |
| 	writel_relaxed(RTIWWDSIZE_50P, wdt->base + RTIWWDSIZECTRL);
 | |
| 
 | |
| 	readl_relaxed(wdt->base + RTIWWDSIZECTRL);
 | |
| 
 | |
| 	/* enable watchdog */
 | |
| 	writel_relaxed(WDENABLE_KEY, wdt->base + RTIDWDCTRL);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int rti_wdt_ping(struct watchdog_device *wdd)
 | |
| {
 | |
| 	struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
 | |
| 
 | |
| 	/* put watchdog in service state */
 | |
| 	writel_relaxed(WDKEY_SEQ0, wdt->base + RTIWDKEY);
 | |
| 	/* put watchdog in active state */
 | |
| 	writel_relaxed(WDKEY_SEQ1, wdt->base + RTIWDKEY);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int rti_wdt_setup_hw_hb(struct watchdog_device *wdd, u32 wsize)
 | |
| {
 | |
| 	/*
 | |
| 	 * RTI only supports a windowed mode, where the watchdog can only
 | |
| 	 * be petted during the open window; not too early or not too late.
 | |
| 	 * The HW configuration options only allow for the open window size
 | |
| 	 * to be 50% or less than that.
 | |
| 	 */
 | |
| 	switch (wsize) {
 | |
| 	case RTIWWDSIZE_50P:
 | |
| 		/* 50% open window => 50% min heartbeat */
 | |
| 		wdd->min_hw_heartbeat_ms = 500 * heartbeat;
 | |
| 		break;
 | |
| 
 | |
| 	case RTIWWDSIZE_25P:
 | |
| 		/* 25% open window => 75% min heartbeat */
 | |
| 		wdd->min_hw_heartbeat_ms = 750 * heartbeat;
 | |
| 		break;
 | |
| 
 | |
| 	case RTIWWDSIZE_12P5:
 | |
| 		/* 12.5% open window => 87.5% min heartbeat */
 | |
| 		wdd->min_hw_heartbeat_ms = 875 * heartbeat;
 | |
| 		break;
 | |
| 
 | |
| 	case RTIWWDSIZE_6P25:
 | |
| 		/* 6.5% open window => 93.5% min heartbeat */
 | |
| 		wdd->min_hw_heartbeat_ms = 935 * heartbeat;
 | |
| 		break;
 | |
| 
 | |
| 	case RTIWWDSIZE_3P125:
 | |
| 		/* 3.125% open window => 96.9% min heartbeat */
 | |
| 		wdd->min_hw_heartbeat_ms = 969 * heartbeat;
 | |
| 		break;
 | |
| 
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static unsigned int rti_wdt_get_timeleft_ms(struct watchdog_device *wdd)
 | |
| {
 | |
| 	u64 timer_counter;
 | |
| 	u32 val;
 | |
| 	struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd);
 | |
| 
 | |
| 	/* if timeout has occurred then return 0 */
 | |
| 	val = readl_relaxed(wdt->base + RTIWDSTATUS);
 | |
| 	if (val & DWDST)
 | |
| 		return 0;
 | |
| 
 | |
| 	timer_counter = readl_relaxed(wdt->base + RTIDWDCNTR);
 | |
| 
 | |
| 	timer_counter *= 1000;
 | |
| 
 | |
| 	do_div(timer_counter, wdt->freq);
 | |
| 
 | |
| 	return timer_counter;
 | |
| }
 | |
| 
 | |
| static unsigned int rti_wdt_get_timeleft(struct watchdog_device *wdd)
 | |
| {
 | |
| 	return rti_wdt_get_timeleft_ms(wdd) / 1000;
 | |
| }
 | |
| 
 | |
| static const struct watchdog_info rti_wdt_info = {
 | |
| 	.options = WDIOF_KEEPALIVEPING,
 | |
| 	.identity = "K3 RTI Watchdog",
 | |
| };
 | |
| 
 | |
| static const struct watchdog_ops rti_wdt_ops = {
 | |
| 	.owner		= THIS_MODULE,
 | |
| 	.start		= rti_wdt_start,
 | |
| 	.ping		= rti_wdt_ping,
 | |
| 	.get_timeleft	= rti_wdt_get_timeleft,
 | |
| };
 | |
| 
 | |
| static int rti_wdt_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	int ret = 0;
 | |
| 	struct device *dev = &pdev->dev;
 | |
| 	struct watchdog_device *wdd;
 | |
| 	struct rti_wdt_device *wdt;
 | |
| 	struct clk *clk;
 | |
| 	u32 last_ping = 0;
 | |
| 
 | |
| 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
 | |
| 	if (!wdt)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	clk = clk_get(dev, NULL);
 | |
| 	if (IS_ERR(clk))
 | |
| 		return dev_err_probe(dev, PTR_ERR(clk), "failed to get clock\n");
 | |
| 
 | |
| 	wdt->freq = clk_get_rate(clk);
 | |
| 
 | |
| 	clk_put(clk);
 | |
| 
 | |
| 	if (!wdt->freq) {
 | |
| 		dev_err(dev, "Failed to get fck rate.\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * If watchdog is running at 32k clock, it is not accurate.
 | |
| 	 * Adjust frequency down in this case so that we don't pet
 | |
| 	 * the watchdog too often.
 | |
| 	 */
 | |
| 	if (wdt->freq < 32768)
 | |
| 		wdt->freq = wdt->freq * 9 / 10;
 | |
| 
 | |
| 	pm_runtime_enable(dev);
 | |
| 	ret = pm_runtime_resume_and_get(dev);
 | |
| 	if (ret < 0) {
 | |
| 		pm_runtime_disable(&pdev->dev);
 | |
| 		return dev_err_probe(dev, ret, "runtime pm failed\n");
 | |
| 	}
 | |
| 
 | |
| 	platform_set_drvdata(pdev, wdt);
 | |
| 
 | |
| 	wdd = &wdt->wdd;
 | |
| 	wdd->info = &rti_wdt_info;
 | |
| 	wdd->ops = &rti_wdt_ops;
 | |
| 	wdd->min_timeout = 1;
 | |
| 	wdd->max_hw_heartbeat_ms = (WDT_PRELOAD_MAX << WDT_PRELOAD_SHIFT) /
 | |
| 		wdt->freq * 1000;
 | |
| 	wdd->parent = dev;
 | |
| 
 | |
| 	watchdog_set_drvdata(wdd, wdt);
 | |
| 	watchdog_set_nowayout(wdd, 1);
 | |
| 	watchdog_set_restart_priority(wdd, 128);
 | |
| 
 | |
| 	wdt->base = devm_platform_ioremap_resource(pdev, 0);
 | |
| 	if (IS_ERR(wdt->base)) {
 | |
| 		ret = PTR_ERR(wdt->base);
 | |
| 		goto err_iomap;
 | |
| 	}
 | |
| 
 | |
| 	if (readl(wdt->base + RTIDWDCTRL) == WDENABLE_KEY) {
 | |
| 		int preset_heartbeat;
 | |
| 		u32 time_left_ms;
 | |
| 		u64 heartbeat_ms;
 | |
| 		u32 wsize;
 | |
| 
 | |
| 		set_bit(WDOG_HW_RUNNING, &wdd->status);
 | |
| 		time_left_ms = rti_wdt_get_timeleft_ms(wdd);
 | |
| 		heartbeat_ms = readl(wdt->base + RTIDWDPRLD);
 | |
| 		heartbeat_ms <<= WDT_PRELOAD_SHIFT;
 | |
| 		heartbeat_ms *= 1000;
 | |
| 		do_div(heartbeat_ms, wdt->freq);
 | |
| 		preset_heartbeat = heartbeat_ms + 500;
 | |
| 		preset_heartbeat /= 1000;
 | |
| 		if (preset_heartbeat != heartbeat)
 | |
| 			dev_warn(dev, "watchdog already running, ignoring heartbeat config!\n");
 | |
| 
 | |
| 		heartbeat = preset_heartbeat;
 | |
| 
 | |
| 		wsize = readl(wdt->base + RTIWWDSIZECTRL);
 | |
| 		ret = rti_wdt_setup_hw_hb(wdd, wsize);
 | |
| 		if (ret) {
 | |
| 			dev_err(dev, "bad window size.\n");
 | |
| 			goto err_iomap;
 | |
| 		}
 | |
| 
 | |
| 		last_ping = heartbeat_ms - time_left_ms;
 | |
| 		if (time_left_ms > heartbeat_ms) {
 | |
| 			dev_warn(dev, "time_left > heartbeat? Assuming last ping just before now.\n");
 | |
| 			last_ping = 0;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	watchdog_init_timeout(wdd, heartbeat, dev);
 | |
| 
 | |
| 	ret = watchdog_register_device(wdd);
 | |
| 	if (ret) {
 | |
| 		dev_err(dev, "cannot register watchdog device\n");
 | |
| 		goto err_iomap;
 | |
| 	}
 | |
| 
 | |
| 	if (last_ping)
 | |
| 		watchdog_set_last_hw_keepalive(wdd, last_ping);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_iomap:
 | |
| 	pm_runtime_put_sync(&pdev->dev);
 | |
| 	pm_runtime_disable(&pdev->dev);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void rti_wdt_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct rti_wdt_device *wdt = platform_get_drvdata(pdev);
 | |
| 
 | |
| 	watchdog_unregister_device(&wdt->wdd);
 | |
| 	pm_runtime_put(&pdev->dev);
 | |
| 	pm_runtime_disable(&pdev->dev);
 | |
| }
 | |
| 
 | |
| static const struct of_device_id rti_wdt_of_match[] = {
 | |
| 	{ .compatible = "ti,j7-rti-wdt", },
 | |
| 	{},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, rti_wdt_of_match);
 | |
| 
 | |
| static struct platform_driver rti_wdt_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "rti-wdt",
 | |
| 		.of_match_table = rti_wdt_of_match,
 | |
| 	},
 | |
| 	.probe = rti_wdt_probe,
 | |
| 	.remove_new = rti_wdt_remove,
 | |
| };
 | |
| 
 | |
| module_platform_driver(rti_wdt_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Tero Kristo <t-kristo@ti.com>");
 | |
| MODULE_DESCRIPTION("K3 RTI Watchdog Driver");
 | |
| 
 | |
| module_param(heartbeat, int, 0);
 | |
| MODULE_PARM_DESC(heartbeat,
 | |
| 		 "Watchdog heartbeat period in seconds from 1 to "
 | |
| 		 __MODULE_STRING(MAX_HEARTBEAT) ", default "
 | |
| 		 __MODULE_STRING(DEFAULT_HEARTBEAT));
 | |
| 
 | |
| MODULE_LICENSE("GPL");
 | |
| MODULE_ALIAS("platform:rti-wdt");
 |