342 lines
		
	
	
		
			8.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			342 lines
		
	
	
		
			8.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| /*
 | |
|  * Copyright (C) 2013 Broadcom Corporation
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/debugfs.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/of_address.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/watchdog.h>
 | |
| 
 | |
| #define SECWDOG_CTRL_REG		0x00000000
 | |
| #define SECWDOG_COUNT_REG		0x00000004
 | |
| 
 | |
| #define SECWDOG_RESERVED_MASK		0x1dffffff
 | |
| #define SECWDOG_WD_LOAD_FLAG		0x10000000
 | |
| #define SECWDOG_EN_MASK			0x08000000
 | |
| #define SECWDOG_SRSTEN_MASK		0x04000000
 | |
| #define SECWDOG_RES_MASK		0x00f00000
 | |
| #define SECWDOG_COUNT_MASK		0x000fffff
 | |
| 
 | |
| #define SECWDOG_MAX_COUNT		SECWDOG_COUNT_MASK
 | |
| #define SECWDOG_CLKS_SHIFT		20
 | |
| #define SECWDOG_MAX_RES			15
 | |
| #define SECWDOG_DEFAULT_RESOLUTION	4
 | |
| #define SECWDOG_MAX_TRY			1000
 | |
| 
 | |
| #define SECS_TO_TICKS(x, w)		((x) << (w)->resolution)
 | |
| #define TICKS_TO_SECS(x, w)		((x) >> (w)->resolution)
 | |
| 
 | |
| #define BCM_KONA_WDT_NAME		"bcm_kona_wdt"
 | |
| 
 | |
| struct bcm_kona_wdt {
 | |
| 	void __iomem *base;
 | |
| 	/*
 | |
| 	 * One watchdog tick is 1/(2^resolution) seconds. Resolution can take
 | |
| 	 * the values 0-15, meaning one tick can be 1s to 30.52us. Our default
 | |
| 	 * resolution of 4 means one tick is 62.5ms.
 | |
| 	 *
 | |
| 	 * The watchdog counter is 20 bits. Depending on resolution, the maximum
 | |
| 	 * counter value of 0xfffff expires after about 12 days (resolution 0)
 | |
| 	 * down to only 32s (resolution 15). The default resolution of 4 gives
 | |
| 	 * us a maximum of about 18 hours and 12 minutes before the watchdog
 | |
| 	 * times out.
 | |
| 	 */
 | |
| 	int resolution;
 | |
| 	spinlock_t lock;
 | |
| #ifdef CONFIG_BCM_KONA_WDT_DEBUG
 | |
| 	unsigned long busy_count;
 | |
| 	struct dentry *debugfs;
 | |
| #endif
 | |
| };
 | |
| 
 | |
| static int secure_register_read(struct bcm_kona_wdt *wdt, uint32_t offset)
 | |
| {
 | |
| 	uint32_t val;
 | |
| 	unsigned count = 0;
 | |
| 
 | |
| 	/*
 | |
| 	 * If the WD_LOAD_FLAG is set, the watchdog counter field is being
 | |
| 	 * updated in hardware. Once the WD timer is updated in hardware, it
 | |
| 	 * gets cleared.
 | |
| 	 */
 | |
| 	do {
 | |
| 		if (unlikely(count > 1))
 | |
| 			udelay(5);
 | |
| 		val = readl_relaxed(wdt->base + offset);
 | |
| 		count++;
 | |
| 	} while ((val & SECWDOG_WD_LOAD_FLAG) && count < SECWDOG_MAX_TRY);
 | |
| 
 | |
| #ifdef CONFIG_BCM_KONA_WDT_DEBUG
 | |
| 	/* Remember the maximum number iterations due to WD_LOAD_FLAG */
 | |
| 	if (count > wdt->busy_count)
 | |
| 		wdt->busy_count = count;
 | |
| #endif
 | |
| 
 | |
| 	/* This is the only place we return a negative value. */
 | |
| 	if (val & SECWDOG_WD_LOAD_FLAG)
 | |
| 		return -ETIMEDOUT;
 | |
| 
 | |
| 	/* We always mask out reserved bits. */
 | |
| 	val &= SECWDOG_RESERVED_MASK;
 | |
| 
 | |
| 	return val;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_BCM_KONA_WDT_DEBUG
 | |
| 
 | |
| static int bcm_kona_show(struct seq_file *s, void *data)
 | |
| {
 | |
| 	int ctl_val, cur_val;
 | |
| 	unsigned long flags;
 | |
| 	struct bcm_kona_wdt *wdt = s->private;
 | |
| 
 | |
| 	if (!wdt) {
 | |
| 		seq_puts(s, "No device pointer\n");
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	spin_lock_irqsave(&wdt->lock, flags);
 | |
| 	ctl_val = secure_register_read(wdt, SECWDOG_CTRL_REG);
 | |
| 	cur_val = secure_register_read(wdt, SECWDOG_COUNT_REG);
 | |
| 	spin_unlock_irqrestore(&wdt->lock, flags);
 | |
| 
 | |
| 	if (ctl_val < 0 || cur_val < 0) {
 | |
| 		seq_puts(s, "Error accessing hardware\n");
 | |
| 	} else {
 | |
| 		int ctl, cur, ctl_sec, cur_sec, res;
 | |
| 
 | |
| 		ctl = ctl_val & SECWDOG_COUNT_MASK;
 | |
| 		res = (ctl_val & SECWDOG_RES_MASK) >> SECWDOG_CLKS_SHIFT;
 | |
| 		cur = cur_val & SECWDOG_COUNT_MASK;
 | |
| 		ctl_sec = TICKS_TO_SECS(ctl, wdt);
 | |
| 		cur_sec = TICKS_TO_SECS(cur, wdt);
 | |
| 		seq_printf(s,
 | |
| 			   "Resolution: %d / %d\n"
 | |
| 			   "Control: %d s / %d (%#x) ticks\n"
 | |
| 			   "Current: %d s / %d (%#x) ticks\n"
 | |
| 			   "Busy count: %lu\n",
 | |
| 			   res, wdt->resolution,
 | |
| 			   ctl_sec, ctl, ctl,
 | |
| 			   cur_sec, cur, cur,
 | |
| 			   wdt->busy_count);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| DEFINE_SHOW_ATTRIBUTE(bcm_kona);
 | |
| 
 | |
| static void bcm_kona_wdt_debug_init(struct platform_device *pdev)
 | |
| {
 | |
| 	struct dentry *dir;
 | |
| 	struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev);
 | |
| 
 | |
| 	if (!wdt)
 | |
| 		return;
 | |
| 
 | |
| 	wdt->debugfs = NULL;
 | |
| 
 | |
| 	dir = debugfs_create_dir(BCM_KONA_WDT_NAME, NULL);
 | |
| 
 | |
| 	debugfs_create_file("info", S_IFREG | S_IRUGO, dir, wdt,
 | |
| 			    &bcm_kona_fops);
 | |
| 	wdt->debugfs = dir;
 | |
| }
 | |
| 
 | |
| static void bcm_kona_wdt_debug_exit(struct platform_device *pdev)
 | |
| {
 | |
| 	struct bcm_kona_wdt *wdt = platform_get_drvdata(pdev);
 | |
| 
 | |
| 	if (wdt)
 | |
| 		debugfs_remove_recursive(wdt->debugfs);
 | |
| }
 | |
| 
 | |
| #else
 | |
| 
 | |
| static void bcm_kona_wdt_debug_init(struct platform_device *pdev) {}
 | |
| static void bcm_kona_wdt_debug_exit(struct platform_device *pdev) {}
 | |
| 
 | |
| #endif /* CONFIG_BCM_KONA_WDT_DEBUG */
 | |
| 
 | |
| static int bcm_kona_wdt_ctrl_reg_modify(struct bcm_kona_wdt *wdt,
 | |
| 					unsigned mask, unsigned newval)
 | |
| {
 | |
| 	int val;
 | |
| 	unsigned long flags;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	spin_lock_irqsave(&wdt->lock, flags);
 | |
| 
 | |
| 	val = secure_register_read(wdt, SECWDOG_CTRL_REG);
 | |
| 	if (val < 0) {
 | |
| 		ret = val;
 | |
| 	} else {
 | |
| 		val &= ~mask;
 | |
| 		val |= newval;
 | |
| 		writel_relaxed(val, wdt->base + SECWDOG_CTRL_REG);
 | |
| 	}
 | |
| 
 | |
| 	spin_unlock_irqrestore(&wdt->lock, flags);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int bcm_kona_wdt_set_resolution_reg(struct bcm_kona_wdt *wdt)
 | |
| {
 | |
| 	if (wdt->resolution > SECWDOG_MAX_RES)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_RES_MASK,
 | |
| 					wdt->resolution << SECWDOG_CLKS_SHIFT);
 | |
| }
 | |
| 
 | |
| static int bcm_kona_wdt_set_timeout_reg(struct watchdog_device *wdog,
 | |
| 					unsigned watchdog_flags)
 | |
| {
 | |
| 	struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
 | |
| 
 | |
| 	return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_COUNT_MASK,
 | |
| 					SECS_TO_TICKS(wdog->timeout, wdt) |
 | |
| 					watchdog_flags);
 | |
| }
 | |
| 
 | |
| static int bcm_kona_wdt_set_timeout(struct watchdog_device *wdog,
 | |
| 	unsigned int t)
 | |
| {
 | |
| 	wdog->timeout = t;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static unsigned int bcm_kona_wdt_get_timeleft(struct watchdog_device *wdog)
 | |
| {
 | |
| 	struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
 | |
| 	int val;
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	spin_lock_irqsave(&wdt->lock, flags);
 | |
| 	val = secure_register_read(wdt, SECWDOG_COUNT_REG);
 | |
| 	spin_unlock_irqrestore(&wdt->lock, flags);
 | |
| 
 | |
| 	if (val < 0)
 | |
| 		return val;
 | |
| 
 | |
| 	return TICKS_TO_SECS(val & SECWDOG_COUNT_MASK, wdt);
 | |
| }
 | |
| 
 | |
| static int bcm_kona_wdt_start(struct watchdog_device *wdog)
 | |
| {
 | |
| 	return bcm_kona_wdt_set_timeout_reg(wdog,
 | |
| 					SECWDOG_EN_MASK | SECWDOG_SRSTEN_MASK);
 | |
| }
 | |
| 
 | |
| static int bcm_kona_wdt_stop(struct watchdog_device *wdog)
 | |
| {
 | |
| 	struct bcm_kona_wdt *wdt = watchdog_get_drvdata(wdog);
 | |
| 
 | |
| 	return bcm_kona_wdt_ctrl_reg_modify(wdt, SECWDOG_EN_MASK |
 | |
| 					    SECWDOG_SRSTEN_MASK, 0);
 | |
| }
 | |
| 
 | |
| static const struct watchdog_ops bcm_kona_wdt_ops = {
 | |
| 	.owner =	THIS_MODULE,
 | |
| 	.start =	bcm_kona_wdt_start,
 | |
| 	.stop =		bcm_kona_wdt_stop,
 | |
| 	.set_timeout =	bcm_kona_wdt_set_timeout,
 | |
| 	.get_timeleft =	bcm_kona_wdt_get_timeleft,
 | |
| };
 | |
| 
 | |
| static const struct watchdog_info bcm_kona_wdt_info = {
 | |
| 	.options =	WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
 | |
| 			WDIOF_KEEPALIVEPING,
 | |
| 	.identity =	"Broadcom Kona Watchdog Timer",
 | |
| };
 | |
| 
 | |
| static struct watchdog_device bcm_kona_wdt_wdd = {
 | |
| 	.info =		&bcm_kona_wdt_info,
 | |
| 	.ops =		&bcm_kona_wdt_ops,
 | |
| 	.min_timeout =	1,
 | |
| 	.max_timeout =	SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION,
 | |
| 	.timeout =	SECWDOG_MAX_COUNT >> SECWDOG_DEFAULT_RESOLUTION,
 | |
| };
 | |
| 
 | |
| static int bcm_kona_wdt_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct device *dev = &pdev->dev;
 | |
| 	struct bcm_kona_wdt *wdt;
 | |
| 	int ret;
 | |
| 
 | |
| 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
 | |
| 	if (!wdt)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	spin_lock_init(&wdt->lock);
 | |
| 
 | |
| 	wdt->base = devm_platform_ioremap_resource(pdev, 0);
 | |
| 	if (IS_ERR(wdt->base))
 | |
| 		return PTR_ERR(wdt->base);
 | |
| 
 | |
| 	wdt->resolution = SECWDOG_DEFAULT_RESOLUTION;
 | |
| 	ret = bcm_kona_wdt_set_resolution_reg(wdt);
 | |
| 	if (ret) {
 | |
| 		dev_err(dev, "Failed to set resolution (error: %d)", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	platform_set_drvdata(pdev, wdt);
 | |
| 	watchdog_set_drvdata(&bcm_kona_wdt_wdd, wdt);
 | |
| 	bcm_kona_wdt_wdd.parent = dev;
 | |
| 
 | |
| 	ret = bcm_kona_wdt_set_timeout_reg(&bcm_kona_wdt_wdd, 0);
 | |
| 	if (ret) {
 | |
| 		dev_err(dev, "Failed set watchdog timeout");
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	watchdog_stop_on_reboot(&bcm_kona_wdt_wdd);
 | |
| 	watchdog_stop_on_unregister(&bcm_kona_wdt_wdd);
 | |
| 	ret = devm_watchdog_register_device(dev, &bcm_kona_wdt_wdd);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	bcm_kona_wdt_debug_init(pdev);
 | |
| 	dev_dbg(dev, "Broadcom Kona Watchdog Timer");
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int bcm_kona_wdt_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	bcm_kona_wdt_debug_exit(pdev);
 | |
| 	dev_dbg(&pdev->dev, "Watchdog driver disabled");
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct of_device_id bcm_kona_wdt_of_match[] = {
 | |
| 	{ .compatible = "brcm,kona-wdt", },
 | |
| 	{},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, bcm_kona_wdt_of_match);
 | |
| 
 | |
| static struct platform_driver bcm_kona_wdt_driver = {
 | |
| 	.driver = {
 | |
| 			.name = BCM_KONA_WDT_NAME,
 | |
| 			.of_match_table = bcm_kona_wdt_of_match,
 | |
| 		  },
 | |
| 	.probe = bcm_kona_wdt_probe,
 | |
| 	.remove = bcm_kona_wdt_remove,
 | |
| };
 | |
| 
 | |
| module_platform_driver(bcm_kona_wdt_driver);
 | |
| 
 | |
| MODULE_ALIAS("platform:" BCM_KONA_WDT_NAME);
 | |
| MODULE_AUTHOR("Markus Mayer <mmayer@broadcom.com>");
 | |
| MODULE_DESCRIPTION("Broadcom Kona Watchdog Driver");
 | |
| MODULE_LICENSE("GPL v2");
 |