377 lines
		
	
	
		
			8.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			377 lines
		
	
	
		
			8.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-or-later
 | |
| /*
 | |
|  * Watchdog driver for Alphascale ASM9260.
 | |
|  *
 | |
|  * Copyright (c) 2014 Oleksij Rempel <linux@rempel-privat.de>
 | |
|  */
 | |
| 
 | |
| #include <linux/bitops.h>
 | |
| #include <linux/clk.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/reset.h>
 | |
| #include <linux/watchdog.h>
 | |
| 
 | |
| #define CLOCK_FREQ	1000000
 | |
| 
 | |
| /* Watchdog Mode register */
 | |
| #define HW_WDMOD			0x00
 | |
| /* Wake interrupt. Set by HW, can't be cleared. */
 | |
| #define BM_MOD_WDINT			BIT(3)
 | |
| /* This bit set if timeout reached. Cleared by SW. */
 | |
| #define BM_MOD_WDTOF			BIT(2)
 | |
| /* HW Reset on timeout */
 | |
| #define BM_MOD_WDRESET			BIT(1)
 | |
| /* WD enable */
 | |
| #define BM_MOD_WDEN			BIT(0)
 | |
| 
 | |
| /*
 | |
|  * Watchdog Timer Constant register
 | |
|  * Minimal value is 0xff, the meaning of this value
 | |
|  * depends on used clock: T = WDCLK * (0xff + 1) * 4
 | |
|  */
 | |
| #define HW_WDTC				0x04
 | |
| #define BM_WDTC_MAX(freq)		(0x7fffffff / (freq))
 | |
| 
 | |
| /* Watchdog Feed register */
 | |
| #define HW_WDFEED			0x08
 | |
| 
 | |
| /* Watchdog Timer Value register */
 | |
| #define HW_WDTV				0x0c
 | |
| 
 | |
| #define ASM9260_WDT_DEFAULT_TIMEOUT	30
 | |
| 
 | |
| enum asm9260_wdt_mode {
 | |
| 	HW_RESET,
 | |
| 	SW_RESET,
 | |
| 	DEBUG,
 | |
| };
 | |
| 
 | |
| struct asm9260_wdt_priv {
 | |
| 	struct device		*dev;
 | |
| 	struct watchdog_device	wdd;
 | |
| 	struct clk		*clk;
 | |
| 	struct clk		*clk_ahb;
 | |
| 	struct reset_control	*rst;
 | |
| 
 | |
| 	void __iomem		*iobase;
 | |
| 	int			irq;
 | |
| 	unsigned long		wdt_freq;
 | |
| 	enum asm9260_wdt_mode	mode;
 | |
| };
 | |
| 
 | |
| static int asm9260_wdt_feed(struct watchdog_device *wdd)
 | |
| {
 | |
| 	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
 | |
| 
 | |
| 	iowrite32(0xaa, priv->iobase + HW_WDFEED);
 | |
| 	iowrite32(0x55, priv->iobase + HW_WDFEED);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static unsigned int asm9260_wdt_gettimeleft(struct watchdog_device *wdd)
 | |
| {
 | |
| 	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
 | |
| 	u32 counter;
 | |
| 
 | |
| 	counter = ioread32(priv->iobase + HW_WDTV);
 | |
| 
 | |
| 	return counter / priv->wdt_freq;
 | |
| }
 | |
| 
 | |
| static int asm9260_wdt_updatetimeout(struct watchdog_device *wdd)
 | |
| {
 | |
| 	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
 | |
| 	u32 counter;
 | |
| 
 | |
| 	counter = wdd->timeout * priv->wdt_freq;
 | |
| 
 | |
| 	iowrite32(counter, priv->iobase + HW_WDTC);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int asm9260_wdt_enable(struct watchdog_device *wdd)
 | |
| {
 | |
| 	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
 | |
| 	u32 mode = 0;
 | |
| 
 | |
| 	if (priv->mode == HW_RESET)
 | |
| 		mode = BM_MOD_WDRESET;
 | |
| 
 | |
| 	iowrite32(BM_MOD_WDEN | mode, priv->iobase + HW_WDMOD);
 | |
| 
 | |
| 	asm9260_wdt_updatetimeout(wdd);
 | |
| 
 | |
| 	asm9260_wdt_feed(wdd);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int asm9260_wdt_disable(struct watchdog_device *wdd)
 | |
| {
 | |
| 	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
 | |
| 
 | |
| 	/* The only way to disable WD is to reset it. */
 | |
| 	reset_control_assert(priv->rst);
 | |
| 	reset_control_deassert(priv->rst);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int asm9260_wdt_settimeout(struct watchdog_device *wdd, unsigned int to)
 | |
| {
 | |
| 	wdd->timeout = to;
 | |
| 	asm9260_wdt_updatetimeout(wdd);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void asm9260_wdt_sys_reset(struct asm9260_wdt_priv *priv)
 | |
| {
 | |
| 	/* init WD if it was not started */
 | |
| 
 | |
| 	iowrite32(BM_MOD_WDEN | BM_MOD_WDRESET, priv->iobase + HW_WDMOD);
 | |
| 
 | |
| 	iowrite32(0xff, priv->iobase + HW_WDTC);
 | |
| 	/* first pass correct sequence */
 | |
| 	asm9260_wdt_feed(&priv->wdd);
 | |
| 	/*
 | |
| 	 * Then write wrong pattern to the feed to trigger reset
 | |
| 	 * ASAP.
 | |
| 	 */
 | |
| 	iowrite32(0xff, priv->iobase + HW_WDFEED);
 | |
| 
 | |
| 	mdelay(1000);
 | |
| }
 | |
| 
 | |
| static irqreturn_t asm9260_wdt_irq(int irq, void *devid)
 | |
| {
 | |
| 	struct asm9260_wdt_priv *priv = devid;
 | |
| 	u32 stat;
 | |
| 
 | |
| 	stat = ioread32(priv->iobase + HW_WDMOD);
 | |
| 	if (!(stat & BM_MOD_WDINT))
 | |
| 		return IRQ_NONE;
 | |
| 
 | |
| 	if (priv->mode == DEBUG) {
 | |
| 		dev_info(priv->dev, "Watchdog Timeout. Do nothing.\n");
 | |
| 	} else {
 | |
| 		dev_info(priv->dev, "Watchdog Timeout. Doing SW Reset.\n");
 | |
| 		asm9260_wdt_sys_reset(priv);
 | |
| 	}
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static int asm9260_restart(struct watchdog_device *wdd, unsigned long action,
 | |
| 			   void *data)
 | |
| {
 | |
| 	struct asm9260_wdt_priv *priv = watchdog_get_drvdata(wdd);
 | |
| 
 | |
| 	asm9260_wdt_sys_reset(priv);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct watchdog_info asm9260_wdt_ident = {
 | |
| 	.options          =     WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
 | |
| 				| WDIOF_MAGICCLOSE,
 | |
| 	.identity         =	"Alphascale asm9260 Watchdog",
 | |
| };
 | |
| 
 | |
| static const struct watchdog_ops asm9260_wdt_ops = {
 | |
| 	.owner		= THIS_MODULE,
 | |
| 	.start		= asm9260_wdt_enable,
 | |
| 	.stop		= asm9260_wdt_disable,
 | |
| 	.get_timeleft	= asm9260_wdt_gettimeleft,
 | |
| 	.ping		= asm9260_wdt_feed,
 | |
| 	.set_timeout	= asm9260_wdt_settimeout,
 | |
| 	.restart	= asm9260_restart,
 | |
| };
 | |
| 
 | |
| static void asm9260_clk_disable_unprepare(void *data)
 | |
| {
 | |
| 	clk_disable_unprepare(data);
 | |
| }
 | |
| 
 | |
| static int asm9260_wdt_get_dt_clks(struct asm9260_wdt_priv *priv)
 | |
| {
 | |
| 	int err;
 | |
| 	unsigned long clk;
 | |
| 
 | |
| 	priv->clk = devm_clk_get(priv->dev, "mod");
 | |
| 	if (IS_ERR(priv->clk)) {
 | |
| 		dev_err(priv->dev, "Failed to get \"mod\" clk\n");
 | |
| 		return PTR_ERR(priv->clk);
 | |
| 	}
 | |
| 
 | |
| 	/* configure AHB clock */
 | |
| 	priv->clk_ahb = devm_clk_get(priv->dev, "ahb");
 | |
| 	if (IS_ERR(priv->clk_ahb)) {
 | |
| 		dev_err(priv->dev, "Failed to get \"ahb\" clk\n");
 | |
| 		return PTR_ERR(priv->clk_ahb);
 | |
| 	}
 | |
| 
 | |
| 	err = clk_prepare_enable(priv->clk_ahb);
 | |
| 	if (err) {
 | |
| 		dev_err(priv->dev, "Failed to enable ahb_clk!\n");
 | |
| 		return err;
 | |
| 	}
 | |
| 	err = devm_add_action_or_reset(priv->dev,
 | |
| 				       asm9260_clk_disable_unprepare,
 | |
| 				       priv->clk_ahb);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	err = clk_set_rate(priv->clk, CLOCK_FREQ);
 | |
| 	if (err) {
 | |
| 		dev_err(priv->dev, "Failed to set rate!\n");
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	err = clk_prepare_enable(priv->clk);
 | |
| 	if (err) {
 | |
| 		dev_err(priv->dev, "Failed to enable clk!\n");
 | |
| 		return err;
 | |
| 	}
 | |
| 	err = devm_add_action_or_reset(priv->dev,
 | |
| 				       asm9260_clk_disable_unprepare,
 | |
| 				       priv->clk);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	/* wdt has internal divider */
 | |
| 	clk = clk_get_rate(priv->clk);
 | |
| 	if (!clk) {
 | |
| 		dev_err(priv->dev, "Failed, clk is 0!\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	priv->wdt_freq = clk / 2;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void asm9260_wdt_get_dt_mode(struct asm9260_wdt_priv *priv)
 | |
| {
 | |
| 	const char *tmp;
 | |
| 	int ret;
 | |
| 
 | |
| 	/* default mode */
 | |
| 	priv->mode = HW_RESET;
 | |
| 
 | |
| 	ret = of_property_read_string(priv->dev->of_node,
 | |
| 				      "alphascale,mode", &tmp);
 | |
| 	if (ret < 0)
 | |
| 		return;
 | |
| 
 | |
| 	if (!strcmp(tmp, "hw"))
 | |
| 		priv->mode = HW_RESET;
 | |
| 	else if (!strcmp(tmp, "sw"))
 | |
| 		priv->mode = SW_RESET;
 | |
| 	else if (!strcmp(tmp, "debug"))
 | |
| 		priv->mode = DEBUG;
 | |
| 	else
 | |
| 		dev_warn(priv->dev, "unknown reset-type: %s. Using default \"hw\" mode.",
 | |
| 			 tmp);
 | |
| }
 | |
| 
 | |
| static int asm9260_wdt_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct device *dev = &pdev->dev;
 | |
| 	struct asm9260_wdt_priv *priv;
 | |
| 	struct watchdog_device *wdd;
 | |
| 	int ret;
 | |
| 	static const char * const mode_name[] = { "hw", "sw", "debug", };
 | |
| 
 | |
| 	priv = devm_kzalloc(dev, sizeof(struct asm9260_wdt_priv), GFP_KERNEL);
 | |
| 	if (!priv)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	priv->dev = dev;
 | |
| 
 | |
| 	priv->iobase = devm_platform_ioremap_resource(pdev, 0);
 | |
| 	if (IS_ERR(priv->iobase))
 | |
| 		return PTR_ERR(priv->iobase);
 | |
| 
 | |
| 	priv->rst = devm_reset_control_get_exclusive(dev, "wdt_rst");
 | |
| 	if (IS_ERR(priv->rst))
 | |
| 		return PTR_ERR(priv->rst);
 | |
| 
 | |
| 	ret = asm9260_wdt_get_dt_clks(priv);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	wdd = &priv->wdd;
 | |
| 	wdd->info = &asm9260_wdt_ident;
 | |
| 	wdd->ops = &asm9260_wdt_ops;
 | |
| 	wdd->min_timeout = 1;
 | |
| 	wdd->max_timeout = BM_WDTC_MAX(priv->wdt_freq);
 | |
| 	wdd->parent = dev;
 | |
| 
 | |
| 	watchdog_set_drvdata(wdd, priv);
 | |
| 
 | |
| 	/*
 | |
| 	 * If 'timeout-sec' unspecified in devicetree, assume a 30 second
 | |
| 	 * default, unless the max timeout is less than 30 seconds, then use
 | |
| 	 * the max instead.
 | |
| 	 */
 | |
| 	wdd->timeout = ASM9260_WDT_DEFAULT_TIMEOUT;
 | |
| 	watchdog_init_timeout(wdd, 0, dev);
 | |
| 
 | |
| 	asm9260_wdt_get_dt_mode(priv);
 | |
| 
 | |
| 	if (priv->mode != HW_RESET)
 | |
| 		priv->irq = platform_get_irq(pdev, 0);
 | |
| 
 | |
| 	if (priv->irq > 0) {
 | |
| 		/*
 | |
| 		 * Not all supported platforms specify an interrupt for the
 | |
| 		 * watchdog, so let's make it optional.
 | |
| 		 */
 | |
| 		ret = devm_request_irq(dev, priv->irq, asm9260_wdt_irq, 0,
 | |
| 				       pdev->name, priv);
 | |
| 		if (ret < 0)
 | |
| 			dev_warn(dev, "failed to request IRQ\n");
 | |
| 	}
 | |
| 
 | |
| 	watchdog_set_restart_priority(wdd, 128);
 | |
| 
 | |
| 	watchdog_stop_on_reboot(wdd);
 | |
| 	watchdog_stop_on_unregister(wdd);
 | |
| 	ret = devm_watchdog_register_device(dev, wdd);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	platform_set_drvdata(pdev, priv);
 | |
| 
 | |
| 	dev_info(dev, "Watchdog enabled (timeout: %d sec, mode: %s)\n",
 | |
| 		 wdd->timeout, mode_name[priv->mode]);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct of_device_id asm9260_wdt_of_match[] = {
 | |
| 	{ .compatible = "alphascale,asm9260-wdt"},
 | |
| 	{},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, asm9260_wdt_of_match);
 | |
| 
 | |
| static struct platform_driver asm9260_wdt_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "asm9260-wdt",
 | |
| 		.of_match_table	= asm9260_wdt_of_match,
 | |
| 	},
 | |
| 	.probe = asm9260_wdt_probe,
 | |
| };
 | |
| module_platform_driver(asm9260_wdt_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("asm9260 WatchDog Timer Driver");
 | |
| MODULE_AUTHOR("Oleksij Rempel <linux@rempel-privat.de>");
 | |
| MODULE_LICENSE("GPL");
 |