354 lines
		
	
	
		
			8.9 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			354 lines
		
	
	
		
			8.9 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * sky81452-backlight.c	SKY81452 backlight driver
 | |
|  *
 | |
|  * Copyright 2014 Skyworks Solutions Inc.
 | |
|  * Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
 | |
|  */
 | |
| 
 | |
| #include <linux/backlight.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| /* registers */
 | |
| #define SKY81452_REG0	0x00
 | |
| #define SKY81452_REG1	0x01
 | |
| #define SKY81452_REG2	0x02
 | |
| #define SKY81452_REG4	0x04
 | |
| #define SKY81452_REG5	0x05
 | |
| 
 | |
| /* bit mask */
 | |
| #define SKY81452_CS	0xFF
 | |
| #define SKY81452_EN	0x3F
 | |
| #define SKY81452_IGPW	0x20
 | |
| #define SKY81452_PWMMD	0x10
 | |
| #define SKY81452_PHASE	0x08
 | |
| #define SKY81452_ILIM	0x04
 | |
| #define SKY81452_VSHRT	0x03
 | |
| #define SKY81452_OCP	0x80
 | |
| #define SKY81452_OTMP	0x40
 | |
| #define SKY81452_SHRT	0x3F
 | |
| #define SKY81452_OPN	0x3F
 | |
| 
 | |
| #define SKY81452_DEFAULT_NAME "lcd-backlight"
 | |
| #define SKY81452_MAX_BRIGHTNESS	(SKY81452_CS + 1)
 | |
| 
 | |
| /**
 | |
|  * struct sky81452_platform_data
 | |
|  * @name:	backlight driver name.
 | |
|  *		If it is not defined, default name is lcd-backlight.
 | |
|  * @gpiod_enable:GPIO descriptor which control EN pin
 | |
|  * @enable:	Enable mask for current sink channel 1, 2, 3, 4, 5 and 6.
 | |
|  * @ignore_pwm:	true if DPWMI should be ignored.
 | |
|  * @dpwm_mode:	true is DPWM dimming mode, otherwise Analog dimming mode.
 | |
|  * @phase_shift:true is phase shift mode.
 | |
|  * @short_detection_threshold:	It should be one of 4, 5, 6 and 7V.
 | |
|  * @boost_current_limit:	It should be one of 2300, 2750mA.
 | |
|  */
 | |
| struct sky81452_bl_platform_data {
 | |
| 	const char *name;
 | |
| 	struct gpio_desc *gpiod_enable;
 | |
| 	unsigned int enable;
 | |
| 	bool ignore_pwm;
 | |
| 	bool dpwm_mode;
 | |
| 	bool phase_shift;
 | |
| 	unsigned int short_detection_threshold;
 | |
| 	unsigned int boost_current_limit;
 | |
| };
 | |
| 
 | |
| #define CTZ(b) __builtin_ctz(b)
 | |
| 
 | |
| static int sky81452_bl_update_status(struct backlight_device *bd)
 | |
| {
 | |
| 	const struct sky81452_bl_platform_data *pdata =
 | |
| 			dev_get_platdata(bd->dev.parent);
 | |
| 	const unsigned int brightness = (unsigned int)bd->props.brightness;
 | |
| 	struct regmap *regmap = bl_get_data(bd);
 | |
| 	int ret;
 | |
| 
 | |
| 	if (brightness > 0) {
 | |
| 		ret = regmap_write(regmap, SKY81452_REG0, brightness - 1);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 
 | |
| 		return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
 | |
| 					pdata->enable << CTZ(SKY81452_EN));
 | |
| 	}
 | |
| 
 | |
| 	return regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN, 0);
 | |
| }
 | |
| 
 | |
| static const struct backlight_ops sky81452_bl_ops = {
 | |
| 	.update_status = sky81452_bl_update_status,
 | |
| };
 | |
| 
 | |
| static ssize_t sky81452_bl_store_enable(struct device *dev,
 | |
| 		struct device_attribute *attr, const char *buf, size_t count)
 | |
| {
 | |
| 	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
 | |
| 	unsigned long value;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = kstrtoul(buf, 16, &value);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = regmap_update_bits(regmap, SKY81452_REG1, SKY81452_EN,
 | |
| 					value << CTZ(SKY81452_EN));
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static ssize_t sky81452_bl_show_open_short(struct device *dev,
 | |
| 		struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
 | |
| 	unsigned int reg, value = 0;
 | |
| 	char tmp[3];
 | |
| 	int i, ret;
 | |
| 
 | |
| 	reg = !strcmp(attr->attr.name, "open") ? SKY81452_REG5 : SKY81452_REG4;
 | |
| 	ret = regmap_read(regmap, reg, &value);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	if (value & SKY81452_SHRT) {
 | |
| 		*buf = 0;
 | |
| 		for (i = 0; i < 6; i++) {
 | |
| 			if (value & 0x01) {
 | |
| 				sprintf(tmp, "%d ", i + 1);
 | |
| 				strcat(buf, tmp);
 | |
| 			}
 | |
| 			value >>= 1;
 | |
| 		}
 | |
| 		strcat(buf, "\n");
 | |
| 	} else {
 | |
| 		strcpy(buf, "none\n");
 | |
| 	}
 | |
| 
 | |
| 	return strlen(buf);
 | |
| }
 | |
| 
 | |
| static ssize_t sky81452_bl_show_fault(struct device *dev,
 | |
| 		struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct regmap *regmap = bl_get_data(to_backlight_device(dev));
 | |
| 	unsigned int value = 0;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_read(regmap, SKY81452_REG4, &value);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	*buf = 0;
 | |
| 
 | |
| 	if (value & SKY81452_OCP)
 | |
| 		strcat(buf, "over-current ");
 | |
| 
 | |
| 	if (value & SKY81452_OTMP)
 | |
| 		strcat(buf, "over-temperature");
 | |
| 
 | |
| 	strcat(buf, "\n");
 | |
| 	return strlen(buf);
 | |
| }
 | |
| 
 | |
| static DEVICE_ATTR(enable, S_IWGRP | S_IWUSR, NULL, sky81452_bl_store_enable);
 | |
| static DEVICE_ATTR(open, S_IRUGO, sky81452_bl_show_open_short, NULL);
 | |
| static DEVICE_ATTR(short, S_IRUGO, sky81452_bl_show_open_short, NULL);
 | |
| static DEVICE_ATTR(fault, S_IRUGO, sky81452_bl_show_fault, NULL);
 | |
| 
 | |
| static struct attribute *sky81452_bl_attribute[] = {
 | |
| 	&dev_attr_enable.attr,
 | |
| 	&dev_attr_open.attr,
 | |
| 	&dev_attr_short.attr,
 | |
| 	&dev_attr_fault.attr,
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static const struct attribute_group sky81452_bl_attr_group = {
 | |
| 	.attrs = sky81452_bl_attribute,
 | |
| };
 | |
| 
 | |
| #ifdef CONFIG_OF
 | |
| static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
 | |
| 							struct device *dev)
 | |
| {
 | |
| 	struct device_node *np = of_node_get(dev->of_node);
 | |
| 	struct sky81452_bl_platform_data *pdata;
 | |
| 	int num_entry;
 | |
| 	unsigned int sources[6];
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!np) {
 | |
| 		dev_err(dev, "backlight node not found.\n");
 | |
| 		return ERR_PTR(-ENODATA);
 | |
| 	}
 | |
| 
 | |
| 	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
 | |
| 	if (!pdata) {
 | |
| 		of_node_put(np);
 | |
| 		return ERR_PTR(-ENOMEM);
 | |
| 	}
 | |
| 
 | |
| 	of_property_read_string(np, "name", &pdata->name);
 | |
| 	pdata->ignore_pwm = of_property_read_bool(np, "skyworks,ignore-pwm");
 | |
| 	pdata->dpwm_mode = of_property_read_bool(np, "skyworks,dpwm-mode");
 | |
| 	pdata->phase_shift = of_property_read_bool(np, "skyworks,phase-shift");
 | |
| 	pdata->gpiod_enable = devm_gpiod_get_optional(dev, NULL, GPIOD_OUT_HIGH);
 | |
| 
 | |
| 	ret = of_property_count_u32_elems(np, "led-sources");
 | |
| 	if (ret < 0) {
 | |
| 		pdata->enable = SKY81452_EN >> CTZ(SKY81452_EN);
 | |
| 	} else {
 | |
| 		num_entry = ret;
 | |
| 		if (num_entry > 6)
 | |
| 			num_entry = 6;
 | |
| 
 | |
| 		ret = of_property_read_u32_array(np, "led-sources", sources,
 | |
| 					num_entry);
 | |
| 		if (ret < 0) {
 | |
| 			dev_err(dev, "led-sources node is invalid.\n");
 | |
| 			of_node_put(np);
 | |
| 			return ERR_PTR(-EINVAL);
 | |
| 		}
 | |
| 
 | |
| 		pdata->enable = 0;
 | |
| 		while (--num_entry)
 | |
| 			pdata->enable |= (1 << sources[num_entry]);
 | |
| 	}
 | |
| 
 | |
| 	ret = of_property_read_u32(np,
 | |
| 			"skyworks,short-detection-threshold-volt",
 | |
| 			&pdata->short_detection_threshold);
 | |
| 	if (ret < 0)
 | |
| 		pdata->short_detection_threshold = 7;
 | |
| 
 | |
| 	ret = of_property_read_u32(np, "skyworks,current-limit-mA",
 | |
| 			&pdata->boost_current_limit);
 | |
| 	if (ret < 0)
 | |
| 		pdata->boost_current_limit = 2750;
 | |
| 
 | |
| 	of_node_put(np);
 | |
| 	return pdata;
 | |
| }
 | |
| #else
 | |
| static struct sky81452_bl_platform_data *sky81452_bl_parse_dt(
 | |
| 							struct device *dev)
 | |
| {
 | |
| 	return ERR_PTR(-EINVAL);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static int sky81452_bl_init_device(struct regmap *regmap,
 | |
| 		struct sky81452_bl_platform_data *pdata)
 | |
| {
 | |
| 	unsigned int value;
 | |
| 
 | |
| 	value = pdata->ignore_pwm ? SKY81452_IGPW : 0;
 | |
| 	value |= pdata->dpwm_mode ? SKY81452_PWMMD : 0;
 | |
| 	value |= pdata->phase_shift ? 0 : SKY81452_PHASE;
 | |
| 
 | |
| 	if (pdata->boost_current_limit == 2300)
 | |
| 		value |= SKY81452_ILIM;
 | |
| 	else if (pdata->boost_current_limit != 2750)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (pdata->short_detection_threshold < 4 ||
 | |
| 				pdata->short_detection_threshold > 7)
 | |
| 		return -EINVAL;
 | |
| 	value |= (7 - pdata->short_detection_threshold) << CTZ(SKY81452_VSHRT);
 | |
| 
 | |
| 	return regmap_write(regmap, SKY81452_REG2, value);
 | |
| }
 | |
| 
 | |
| static int sky81452_bl_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct device *dev = &pdev->dev;
 | |
| 	struct regmap *regmap = dev_get_drvdata(dev->parent);
 | |
| 	struct sky81452_bl_platform_data *pdata;
 | |
| 	struct backlight_device *bd;
 | |
| 	struct backlight_properties props;
 | |
| 	const char *name;
 | |
| 	int ret;
 | |
| 
 | |
| 	pdata = sky81452_bl_parse_dt(dev);
 | |
| 	if (IS_ERR(pdata))
 | |
| 		return PTR_ERR(pdata);
 | |
| 
 | |
| 	ret = sky81452_bl_init_device(regmap, pdata);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev, "failed to initialize. err=%d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	memset(&props, 0, sizeof(props));
 | |
| 	props.max_brightness = SKY81452_MAX_BRIGHTNESS;
 | |
| 	name = pdata->name ? pdata->name : SKY81452_DEFAULT_NAME;
 | |
| 	bd = devm_backlight_device_register(dev, name, dev, regmap,
 | |
| 						&sky81452_bl_ops, &props);
 | |
| 	if (IS_ERR(bd)) {
 | |
| 		dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(bd));
 | |
| 		return PTR_ERR(bd);
 | |
| 	}
 | |
| 
 | |
| 	platform_set_drvdata(pdev, bd);
 | |
| 
 | |
| 	ret = sysfs_create_group(&bd->dev.kobj, &sky81452_bl_attr_group);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev, "failed to create attribute. err=%d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int sky81452_bl_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	const struct sky81452_bl_platform_data *pdata =
 | |
| 						dev_get_platdata(&pdev->dev);
 | |
| 	struct backlight_device *bd = platform_get_drvdata(pdev);
 | |
| 
 | |
| 	sysfs_remove_group(&bd->dev.kobj, &sky81452_bl_attr_group);
 | |
| 
 | |
| 	bd->props.power = FB_BLANK_UNBLANK;
 | |
| 	bd->props.brightness = 0;
 | |
| 	backlight_update_status(bd);
 | |
| 
 | |
| 	if (pdata->gpiod_enable)
 | |
| 		gpiod_set_value_cansleep(pdata->gpiod_enable, 0);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_OF
 | |
| static const struct of_device_id sky81452_bl_of_match[] = {
 | |
| 	{ .compatible = "skyworks,sky81452-backlight", },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, sky81452_bl_of_match);
 | |
| #endif
 | |
| 
 | |
| static struct platform_driver sky81452_bl_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "sky81452-backlight",
 | |
| 		.of_match_table = of_match_ptr(sky81452_bl_of_match),
 | |
| 	},
 | |
| 	.probe = sky81452_bl_probe,
 | |
| 	.remove = sky81452_bl_remove,
 | |
| };
 | |
| 
 | |
| module_platform_driver(sky81452_bl_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("Skyworks SKY81452 backlight driver");
 | |
| MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>");
 | |
| MODULE_LICENSE("GPL v2");
 |