1149 lines
		
	
	
		
			29 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1149 lines
		
	
	
		
			29 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0+
 | |
| /*
 | |
|  * c67x00-sched.c: Cypress C67X00 USB Host Controller Driver - TD scheduling
 | |
|  *
 | |
|  * Copyright (C) 2006-2008 Barco N.V.
 | |
|  *    Derived from the Cypress cy7c67200/300 ezusb linux driver and
 | |
|  *    based on multiple host controller drivers inside the linux kernel.
 | |
|  */
 | |
| 
 | |
| #include <linux/kthread.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| #include "c67x00.h"
 | |
| #include "c67x00-hcd.h"
 | |
| 
 | |
| /*
 | |
|  * These are the stages for a control urb, they are kept
 | |
|  * in both urb->interval and td->privdata.
 | |
|  */
 | |
| #define SETUP_STAGE		0
 | |
| #define DATA_STAGE		1
 | |
| #define STATUS_STAGE		2
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| /*
 | |
|  * struct c67x00_ep_data: Host endpoint data structure
 | |
|  */
 | |
| struct c67x00_ep_data {
 | |
| 	struct list_head queue;
 | |
| 	struct list_head node;
 | |
| 	struct usb_host_endpoint *hep;
 | |
| 	struct usb_device *dev;
 | |
| 	u16 next_frame;		/* For int/isoc transactions */
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * struct c67x00_td
 | |
|  *
 | |
|  * Hardware parts are little endiannes, SW in CPU endianess.
 | |
|  */
 | |
| struct c67x00_td {
 | |
| 	/* HW specific part */
 | |
| 	__le16 ly_base_addr;	/* Bytes 0-1 */
 | |
| 	__le16 port_length;	/* Bytes 2-3 */
 | |
| 	u8 pid_ep;		/* Byte 4 */
 | |
| 	u8 dev_addr;		/* Byte 5 */
 | |
| 	u8 ctrl_reg;		/* Byte 6 */
 | |
| 	u8 status;		/* Byte 7 */
 | |
| 	u8 retry_cnt;		/* Byte 8 */
 | |
| #define TT_OFFSET		2
 | |
| #define TT_CONTROL		0
 | |
| #define TT_ISOCHRONOUS		1
 | |
| #define TT_BULK			2
 | |
| #define TT_INTERRUPT		3
 | |
| 	u8 residue;		/* Byte 9 */
 | |
| 	__le16 next_td_addr;	/* Bytes 10-11 */
 | |
| 	/* SW part */
 | |
| 	struct list_head td_list;
 | |
| 	u16 td_addr;
 | |
| 	void *data;
 | |
| 	struct urb *urb;
 | |
| 	unsigned long privdata;
 | |
| 
 | |
| 	/* These are needed for handling the toggle bits:
 | |
| 	 * an urb can be dequeued while a td is in progress
 | |
| 	 * after checking the td, the toggle bit might need to
 | |
| 	 * be fixed */
 | |
| 	struct c67x00_ep_data *ep_data;
 | |
| 	unsigned int pipe;
 | |
| };
 | |
| 
 | |
| struct c67x00_urb_priv {
 | |
| 	struct list_head hep_node;
 | |
| 	struct urb *urb;
 | |
| 	int port;
 | |
| 	int cnt;		/* packet number for isoc */
 | |
| 	int status;
 | |
| 	struct c67x00_ep_data *ep_data;
 | |
| };
 | |
| 
 | |
| #define td_udev(td)	((td)->ep_data->dev)
 | |
| 
 | |
| #define CY_TD_SIZE		12
 | |
| 
 | |
| #define TD_PIDEP_OFFSET		0x04
 | |
| #define TD_PIDEPMASK_PID	0xF0
 | |
| #define TD_PIDEPMASK_EP		0x0F
 | |
| #define TD_PORTLENMASK_DL	0x03FF
 | |
| #define TD_PORTLENMASK_PN	0xC000
 | |
| 
 | |
| #define TD_STATUS_OFFSET	0x07
 | |
| #define TD_STATUSMASK_ACK	0x01
 | |
| #define TD_STATUSMASK_ERR	0x02
 | |
| #define TD_STATUSMASK_TMOUT	0x04
 | |
| #define TD_STATUSMASK_SEQ	0x08
 | |
| #define TD_STATUSMASK_SETUP	0x10
 | |
| #define TD_STATUSMASK_OVF	0x20
 | |
| #define TD_STATUSMASK_NAK	0x40
 | |
| #define TD_STATUSMASK_STALL	0x80
 | |
| 
 | |
| #define TD_ERROR_MASK		(TD_STATUSMASK_ERR | TD_STATUSMASK_TMOUT | \
 | |
| 				 TD_STATUSMASK_STALL)
 | |
| 
 | |
| #define TD_RETRYCNT_OFFSET	0x08
 | |
| #define TD_RETRYCNTMASK_ACT_FLG	0x10
 | |
| #define TD_RETRYCNTMASK_TX_TYPE	0x0C
 | |
| #define TD_RETRYCNTMASK_RTY_CNT	0x03
 | |
| 
 | |
| #define TD_RESIDUE_OVERFLOW	0x80
 | |
| 
 | |
| #define TD_PID_IN		0x90
 | |
| 
 | |
| /* Residue: signed 8bits, neg -> OVERFLOW, pos -> UNDERFLOW */
 | |
| #define td_residue(td)		((__s8)(td->residue))
 | |
| #define td_ly_base_addr(td)	(__le16_to_cpu((td)->ly_base_addr))
 | |
| #define td_port_length(td)	(__le16_to_cpu((td)->port_length))
 | |
| #define td_next_td_addr(td)	(__le16_to_cpu((td)->next_td_addr))
 | |
| 
 | |
| #define td_active(td)		((td)->retry_cnt & TD_RETRYCNTMASK_ACT_FLG)
 | |
| #define td_length(td)		(td_port_length(td) & TD_PORTLENMASK_DL)
 | |
| 
 | |
| #define td_sequence_ok(td)	(!td->status || \
 | |
| 				 (!(td->status & TD_STATUSMASK_SEQ) ==	\
 | |
| 				  !(td->ctrl_reg & SEQ_SEL)))
 | |
| 
 | |
| #define td_acked(td)		(!td->status || \
 | |
| 				 (td->status & TD_STATUSMASK_ACK))
 | |
| #define td_actual_bytes(td)	(td_length(td) - td_residue(td))
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| /*
 | |
|  * dbg_td - Dump the contents of the TD
 | |
|  */
 | |
| static void dbg_td(struct c67x00_hcd *c67x00, struct c67x00_td *td, char *msg)
 | |
| {
 | |
| 	struct device *dev = c67x00_hcd_dev(c67x00);
 | |
| 
 | |
| 	dev_dbg(dev, "### %s at 0x%04x\n", msg, td->td_addr);
 | |
| 	dev_dbg(dev, "urb:      0x%p\n", td->urb);
 | |
| 	dev_dbg(dev, "endpoint:   %4d\n", usb_pipeendpoint(td->pipe));
 | |
| 	dev_dbg(dev, "pipeout:    %4d\n", usb_pipeout(td->pipe));
 | |
| 	dev_dbg(dev, "ly_base_addr: 0x%04x\n", td_ly_base_addr(td));
 | |
| 	dev_dbg(dev, "port_length:  0x%04x\n", td_port_length(td));
 | |
| 	dev_dbg(dev, "pid_ep:         0x%02x\n", td->pid_ep);
 | |
| 	dev_dbg(dev, "dev_addr:       0x%02x\n", td->dev_addr);
 | |
| 	dev_dbg(dev, "ctrl_reg:       0x%02x\n", td->ctrl_reg);
 | |
| 	dev_dbg(dev, "status:         0x%02x\n", td->status);
 | |
| 	dev_dbg(dev, "retry_cnt:      0x%02x\n", td->retry_cnt);
 | |
| 	dev_dbg(dev, "residue:        0x%02x\n", td->residue);
 | |
| 	dev_dbg(dev, "next_td_addr: 0x%04x\n", td_next_td_addr(td));
 | |
| 	dev_dbg(dev, "data: %*ph\n", td_length(td), td->data);
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| /* Helper functions */
 | |
| 
 | |
| static inline u16 c67x00_get_current_frame_number(struct c67x00_hcd *c67x00)
 | |
| {
 | |
| 	return c67x00_ll_husb_get_frame(c67x00->sie) & HOST_FRAME_MASK;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * frame_add
 | |
|  * Software wraparound for framenumbers.
 | |
|  */
 | |
| static inline u16 frame_add(u16 a, u16 b)
 | |
| {
 | |
| 	return (a + b) & HOST_FRAME_MASK;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * frame_after - is frame a after frame b
 | |
|  */
 | |
| static inline int frame_after(u16 a, u16 b)
 | |
| {
 | |
| 	return ((HOST_FRAME_MASK + a - b) & HOST_FRAME_MASK) <
 | |
| 	    (HOST_FRAME_MASK / 2);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * frame_after_eq - is frame a after or equal to frame b
 | |
|  */
 | |
| static inline int frame_after_eq(u16 a, u16 b)
 | |
| {
 | |
| 	return ((HOST_FRAME_MASK + 1 + a - b) & HOST_FRAME_MASK) <
 | |
| 	    (HOST_FRAME_MASK / 2);
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| /*
 | |
|  * c67x00_release_urb - remove link from all tds to this urb
 | |
|  * Disconnects the urb from it's tds, so that it can be given back.
 | |
|  * pre: urb->hcpriv != NULL
 | |
|  */
 | |
| static void c67x00_release_urb(struct c67x00_hcd *c67x00, struct urb *urb)
 | |
| {
 | |
| 	struct c67x00_td *td;
 | |
| 	struct c67x00_urb_priv *urbp;
 | |
| 
 | |
| 	BUG_ON(!urb);
 | |
| 
 | |
| 	c67x00->urb_count--;
 | |
| 
 | |
| 	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
 | |
| 		c67x00->urb_iso_count--;
 | |
| 		if (c67x00->urb_iso_count == 0)
 | |
| 			c67x00->max_frame_bw = MAX_FRAME_BW_STD;
 | |
| 	}
 | |
| 
 | |
| 	/* TODO this might be not so efficient when we've got many urbs!
 | |
| 	 * Alternatives:
 | |
| 	 *   * only clear when needed
 | |
| 	 *   * keep a list of tds with each urbp
 | |
| 	 */
 | |
| 	list_for_each_entry(td, &c67x00->td_list, td_list)
 | |
| 		if (urb == td->urb)
 | |
| 			td->urb = NULL;
 | |
| 
 | |
| 	urbp = urb->hcpriv;
 | |
| 	urb->hcpriv = NULL;
 | |
| 	list_del(&urbp->hep_node);
 | |
| 	kfree(urbp);
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| static struct c67x00_ep_data *
 | |
| c67x00_ep_data_alloc(struct c67x00_hcd *c67x00, struct urb *urb)
 | |
| {
 | |
| 	struct usb_host_endpoint *hep = urb->ep;
 | |
| 	struct c67x00_ep_data *ep_data;
 | |
| 	int type;
 | |
| 
 | |
| 	c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
 | |
| 
 | |
| 	/* Check if endpoint already has a c67x00_ep_data struct allocated */
 | |
| 	if (hep->hcpriv) {
 | |
| 		ep_data = hep->hcpriv;
 | |
| 		if (frame_after(c67x00->current_frame, ep_data->next_frame))
 | |
| 			ep_data->next_frame =
 | |
| 			    frame_add(c67x00->current_frame, 1);
 | |
| 		return hep->hcpriv;
 | |
| 	}
 | |
| 
 | |
| 	/* Allocate and initialize a new c67x00 endpoint data structure */
 | |
| 	ep_data = kzalloc(sizeof(*ep_data), GFP_ATOMIC);
 | |
| 	if (!ep_data)
 | |
| 		return NULL;
 | |
| 
 | |
| 	INIT_LIST_HEAD(&ep_data->queue);
 | |
| 	INIT_LIST_HEAD(&ep_data->node);
 | |
| 	ep_data->hep = hep;
 | |
| 
 | |
| 	/* hold a reference to udev as long as this endpoint lives,
 | |
| 	 * this is needed to possibly fix the data toggle */
 | |
| 	ep_data->dev = usb_get_dev(urb->dev);
 | |
| 	hep->hcpriv = ep_data;
 | |
| 
 | |
| 	/* For ISOC and INT endpoints, start ASAP: */
 | |
| 	ep_data->next_frame = frame_add(c67x00->current_frame, 1);
 | |
| 
 | |
| 	/* Add the endpoint data to one of the pipe lists; must be added
 | |
| 	   in order of endpoint address */
 | |
| 	type = usb_pipetype(urb->pipe);
 | |
| 	if (list_empty(&ep_data->node)) {
 | |
| 		list_add(&ep_data->node, &c67x00->list[type]);
 | |
| 	} else {
 | |
| 		struct c67x00_ep_data *prev;
 | |
| 
 | |
| 		list_for_each_entry(prev, &c67x00->list[type], node) {
 | |
| 			if (prev->hep->desc.bEndpointAddress >
 | |
| 			    hep->desc.bEndpointAddress) {
 | |
| 				list_add(&ep_data->node, prev->node.prev);
 | |
| 				break;
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return ep_data;
 | |
| }
 | |
| 
 | |
| static int c67x00_ep_data_free(struct usb_host_endpoint *hep)
 | |
| {
 | |
| 	struct c67x00_ep_data *ep_data = hep->hcpriv;
 | |
| 
 | |
| 	if (!ep_data)
 | |
| 		return 0;
 | |
| 
 | |
| 	if (!list_empty(&ep_data->queue))
 | |
| 		return -EBUSY;
 | |
| 
 | |
| 	usb_put_dev(ep_data->dev);
 | |
| 	list_del(&ep_data->queue);
 | |
| 	list_del(&ep_data->node);
 | |
| 
 | |
| 	kfree(ep_data);
 | |
| 	hep->hcpriv = NULL;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| void c67x00_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
 | |
| {
 | |
| 	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
 | |
| 	unsigned long flags;
 | |
| 
 | |
| 	if (!list_empty(&ep->urb_list))
 | |
| 		dev_warn(c67x00_hcd_dev(c67x00), "error: urb list not empty\n");
 | |
| 
 | |
| 	spin_lock_irqsave(&c67x00->lock, flags);
 | |
| 
 | |
| 	/* loop waiting for all transfers in the endpoint queue to complete */
 | |
| 	while (c67x00_ep_data_free(ep)) {
 | |
| 		/* Drop the lock so we can sleep waiting for the hardware */
 | |
| 		spin_unlock_irqrestore(&c67x00->lock, flags);
 | |
| 
 | |
| 		/* it could happen that we reinitialize this completion, while
 | |
| 		 * somebody was waiting for that completion.  The timeout and
 | |
| 		 * while loop handle such cases, but this might be improved */
 | |
| 		reinit_completion(&c67x00->endpoint_disable);
 | |
| 		c67x00_sched_kick(c67x00);
 | |
| 		wait_for_completion_timeout(&c67x00->endpoint_disable, 1 * HZ);
 | |
| 
 | |
| 		spin_lock_irqsave(&c67x00->lock, flags);
 | |
| 	}
 | |
| 
 | |
| 	spin_unlock_irqrestore(&c67x00->lock, flags);
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| static inline int get_root_port(struct usb_device *dev)
 | |
| {
 | |
| 	while (dev->parent->parent)
 | |
| 		dev = dev->parent;
 | |
| 	return dev->portnum;
 | |
| }
 | |
| 
 | |
| int c67x00_urb_enqueue(struct usb_hcd *hcd,
 | |
| 		       struct urb *urb, gfp_t mem_flags)
 | |
| {
 | |
| 	int ret;
 | |
| 	unsigned long flags;
 | |
| 	struct c67x00_urb_priv *urbp;
 | |
| 	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
 | |
| 	int port = get_root_port(urb->dev)-1;
 | |
| 
 | |
| 	/* Allocate and initialize urb private data */
 | |
| 	urbp = kzalloc(sizeof(*urbp), mem_flags);
 | |
| 	if (!urbp) {
 | |
| 		ret = -ENOMEM;
 | |
| 		goto err_urbp;
 | |
| 	}
 | |
| 
 | |
| 	spin_lock_irqsave(&c67x00->lock, flags);
 | |
| 
 | |
| 	/* Make sure host controller is running */
 | |
| 	if (!HC_IS_RUNNING(hcd->state)) {
 | |
| 		ret = -ENODEV;
 | |
| 		goto err_not_linked;
 | |
| 	}
 | |
| 
 | |
| 	ret = usb_hcd_link_urb_to_ep(hcd, urb);
 | |
| 	if (ret)
 | |
| 		goto err_not_linked;
 | |
| 
 | |
| 	INIT_LIST_HEAD(&urbp->hep_node);
 | |
| 	urbp->urb = urb;
 | |
| 	urbp->port = port;
 | |
| 
 | |
| 	urbp->ep_data = c67x00_ep_data_alloc(c67x00, urb);
 | |
| 
 | |
| 	if (!urbp->ep_data) {
 | |
| 		ret = -ENOMEM;
 | |
| 		goto err_epdata;
 | |
| 	}
 | |
| 
 | |
| 	/* TODO claim bandwidth with usb_claim_bandwidth?
 | |
| 	 * also release it somewhere! */
 | |
| 
 | |
| 	urb->hcpriv = urbp;
 | |
| 
 | |
| 	urb->actual_length = 0;	/* Nothing received/transmitted yet */
 | |
| 
 | |
| 	switch (usb_pipetype(urb->pipe)) {
 | |
| 	case PIPE_CONTROL:
 | |
| 		urb->interval = SETUP_STAGE;
 | |
| 		break;
 | |
| 	case PIPE_INTERRUPT:
 | |
| 		break;
 | |
| 	case PIPE_BULK:
 | |
| 		break;
 | |
| 	case PIPE_ISOCHRONOUS:
 | |
| 		if (c67x00->urb_iso_count == 0)
 | |
| 			c67x00->max_frame_bw = MAX_FRAME_BW_ISO;
 | |
| 		c67x00->urb_iso_count++;
 | |
| 		/* Assume always URB_ISO_ASAP, FIXME */
 | |
| 		if (list_empty(&urbp->ep_data->queue))
 | |
| 			urb->start_frame = urbp->ep_data->next_frame;
 | |
| 		else {
 | |
| 			/* Go right after the last one */
 | |
| 			struct urb *last_urb;
 | |
| 
 | |
| 			last_urb = list_entry(urbp->ep_data->queue.prev,
 | |
| 					      struct c67x00_urb_priv,
 | |
| 					      hep_node)->urb;
 | |
| 			urb->start_frame =
 | |
| 			    frame_add(last_urb->start_frame,
 | |
| 				      last_urb->number_of_packets *
 | |
| 				      last_urb->interval);
 | |
| 		}
 | |
| 		urbp->cnt = 0;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	/* Add the URB to the endpoint queue */
 | |
| 	list_add_tail(&urbp->hep_node, &urbp->ep_data->queue);
 | |
| 
 | |
| 	/* If this is the only URB, kick start the controller */
 | |
| 	if (!c67x00->urb_count++)
 | |
| 		c67x00_ll_hpi_enable_sofeop(c67x00->sie);
 | |
| 
 | |
| 	c67x00_sched_kick(c67x00);
 | |
| 	spin_unlock_irqrestore(&c67x00->lock, flags);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_epdata:
 | |
| 	usb_hcd_unlink_urb_from_ep(hcd, urb);
 | |
| err_not_linked:
 | |
| 	spin_unlock_irqrestore(&c67x00->lock, flags);
 | |
| 	kfree(urbp);
 | |
| err_urbp:
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| int c67x00_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 | |
| {
 | |
| 	struct c67x00_hcd *c67x00 = hcd_to_c67x00_hcd(hcd);
 | |
| 	unsigned long flags;
 | |
| 	int rc;
 | |
| 
 | |
| 	spin_lock_irqsave(&c67x00->lock, flags);
 | |
| 	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
 | |
| 	if (rc)
 | |
| 		goto done;
 | |
| 
 | |
| 	c67x00_release_urb(c67x00, urb);
 | |
| 	usb_hcd_unlink_urb_from_ep(hcd, urb);
 | |
| 
 | |
| 	spin_unlock(&c67x00->lock);
 | |
| 	usb_hcd_giveback_urb(hcd, urb, status);
 | |
| 	spin_lock(&c67x00->lock);
 | |
| 
 | |
| 	spin_unlock_irqrestore(&c67x00->lock, flags);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
|  done:
 | |
| 	spin_unlock_irqrestore(&c67x00->lock, flags);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| /*
 | |
|  * pre: c67x00 locked, urb unlocked
 | |
|  */
 | |
| static void
 | |
| c67x00_giveback_urb(struct c67x00_hcd *c67x00, struct urb *urb, int status)
 | |
| {
 | |
| 	struct c67x00_urb_priv *urbp;
 | |
| 
 | |
| 	if (!urb)
 | |
| 		return;
 | |
| 
 | |
| 	urbp = urb->hcpriv;
 | |
| 	urbp->status = status;
 | |
| 
 | |
| 	list_del_init(&urbp->hep_node);
 | |
| 
 | |
| 	c67x00_release_urb(c67x00, urb);
 | |
| 	usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb);
 | |
| 	spin_unlock(&c67x00->lock);
 | |
| 	usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, status);
 | |
| 	spin_lock(&c67x00->lock);
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| static int c67x00_claim_frame_bw(struct c67x00_hcd *c67x00, struct urb *urb,
 | |
| 				 int len, int periodic)
 | |
| {
 | |
| 	struct c67x00_urb_priv *urbp = urb->hcpriv;
 | |
| 	int bit_time;
 | |
| 
 | |
| 	/* According to the C67x00 BIOS user manual, page 3-18,19, the
 | |
| 	 * following calculations provide the full speed bit times for
 | |
| 	 * a transaction.
 | |
| 	 *
 | |
| 	 * FS(in)	= 112.5 +  9.36*BC + HOST_DELAY
 | |
| 	 * FS(in,iso)	=  90.5 +  9.36*BC + HOST_DELAY
 | |
| 	 * FS(out)	= 112.5 +  9.36*BC + HOST_DELAY
 | |
| 	 * FS(out,iso)	=  78.4 +  9.36*BC + HOST_DELAY
 | |
| 	 * LS(in)	= 802.4 + 75.78*BC + HOST_DELAY
 | |
| 	 * LS(out)	= 802.6 + 74.67*BC + HOST_DELAY
 | |
| 	 *
 | |
| 	 * HOST_DELAY == 106 for the c67200 and c67300.
 | |
| 	 */
 | |
| 
 | |
| 	/* make calculations in 1/100 bit times to maintain resolution */
 | |
| 	if (urbp->ep_data->dev->speed == USB_SPEED_LOW) {
 | |
| 		/* Low speed pipe */
 | |
| 		if (usb_pipein(urb->pipe))
 | |
| 			bit_time = 80240 + 7578*len;
 | |
| 		else
 | |
| 			bit_time = 80260 + 7467*len;
 | |
| 	} else {
 | |
| 		/* FS pipes */
 | |
| 		if (usb_pipeisoc(urb->pipe))
 | |
| 			bit_time = usb_pipein(urb->pipe) ? 9050 : 7840;
 | |
| 		else
 | |
| 			bit_time = 11250;
 | |
| 		bit_time += 936*len;
 | |
| 	}
 | |
| 
 | |
| 	/* Scale back down to integer bit times.  Use a host delay of 106.
 | |
| 	 * (this is the only place it is used) */
 | |
| 	bit_time = ((bit_time+50) / 100) + 106;
 | |
| 
 | |
| 	if (unlikely(bit_time + c67x00->bandwidth_allocated >=
 | |
| 		     c67x00->max_frame_bw))
 | |
| 		return -EMSGSIZE;
 | |
| 
 | |
| 	if (unlikely(c67x00->next_td_addr + CY_TD_SIZE >=
 | |
| 		     c67x00->td_base_addr + SIE_TD_SIZE))
 | |
| 		return -EMSGSIZE;
 | |
| 
 | |
| 	if (unlikely(c67x00->next_buf_addr + len >=
 | |
| 		     c67x00->buf_base_addr + SIE_TD_BUF_SIZE))
 | |
| 		return -EMSGSIZE;
 | |
| 
 | |
| 	if (periodic) {
 | |
| 		if (unlikely(bit_time + c67x00->periodic_bw_allocated >=
 | |
| 			     MAX_PERIODIC_BW(c67x00->max_frame_bw)))
 | |
| 			return -EMSGSIZE;
 | |
| 		c67x00->periodic_bw_allocated += bit_time;
 | |
| 	}
 | |
| 
 | |
| 	c67x00->bandwidth_allocated += bit_time;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| /*
 | |
|  * td_addr and buf_addr must be word aligned
 | |
|  */
 | |
| static int c67x00_create_td(struct c67x00_hcd *c67x00, struct urb *urb,
 | |
| 			    void *data, int len, int pid, int toggle,
 | |
| 			    unsigned long privdata)
 | |
| {
 | |
| 	struct c67x00_td *td;
 | |
| 	struct c67x00_urb_priv *urbp = urb->hcpriv;
 | |
| 	const __u8 active_flag = 1, retry_cnt = 3;
 | |
| 	__u8 cmd = 0;
 | |
| 	int tt = 0;
 | |
| 
 | |
| 	if (c67x00_claim_frame_bw(c67x00, urb, len, usb_pipeisoc(urb->pipe)
 | |
| 				  || usb_pipeint(urb->pipe)))
 | |
| 		return -EMSGSIZE;	/* Not really an error, but expected */
 | |
| 
 | |
| 	td = kzalloc(sizeof(*td), GFP_ATOMIC);
 | |
| 	if (!td)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	td->pipe = urb->pipe;
 | |
| 	td->ep_data = urbp->ep_data;
 | |
| 
 | |
| 	if ((td_udev(td)->speed == USB_SPEED_LOW) &&
 | |
| 	    !(c67x00->low_speed_ports & (1 << urbp->port)))
 | |
| 		cmd |= PREAMBLE_EN;
 | |
| 
 | |
| 	switch (usb_pipetype(td->pipe)) {
 | |
| 	case PIPE_ISOCHRONOUS:
 | |
| 		tt = TT_ISOCHRONOUS;
 | |
| 		cmd |= ISO_EN;
 | |
| 		break;
 | |
| 	case PIPE_CONTROL:
 | |
| 		tt = TT_CONTROL;
 | |
| 		break;
 | |
| 	case PIPE_BULK:
 | |
| 		tt = TT_BULK;
 | |
| 		break;
 | |
| 	case PIPE_INTERRUPT:
 | |
| 		tt = TT_INTERRUPT;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	if (toggle)
 | |
| 		cmd |= SEQ_SEL;
 | |
| 
 | |
| 	cmd |= ARM_EN;
 | |
| 
 | |
| 	/* SW part */
 | |
| 	td->td_addr = c67x00->next_td_addr;
 | |
| 	c67x00->next_td_addr = c67x00->next_td_addr + CY_TD_SIZE;
 | |
| 
 | |
| 	/* HW part */
 | |
| 	td->ly_base_addr = __cpu_to_le16(c67x00->next_buf_addr);
 | |
| 	td->port_length = __cpu_to_le16((c67x00->sie->sie_num << 15) |
 | |
| 					(urbp->port << 14) | (len & 0x3FF));
 | |
| 	td->pid_ep = ((pid & 0xF) << TD_PIDEP_OFFSET) |
 | |
| 	    (usb_pipeendpoint(td->pipe) & 0xF);
 | |
| 	td->dev_addr = usb_pipedevice(td->pipe) & 0x7F;
 | |
| 	td->ctrl_reg = cmd;
 | |
| 	td->status = 0;
 | |
| 	td->retry_cnt = (tt << TT_OFFSET) | (active_flag << 4) | retry_cnt;
 | |
| 	td->residue = 0;
 | |
| 	td->next_td_addr = __cpu_to_le16(c67x00->next_td_addr);
 | |
| 
 | |
| 	/* SW part */
 | |
| 	td->data = data;
 | |
| 	td->urb = urb;
 | |
| 	td->privdata = privdata;
 | |
| 
 | |
| 	c67x00->next_buf_addr += (len + 1) & ~0x01;	/* properly align */
 | |
| 
 | |
| 	list_add_tail(&td->td_list, &c67x00->td_list);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static inline void c67x00_release_td(struct c67x00_td *td)
 | |
| {
 | |
| 	list_del_init(&td->td_list);
 | |
| 	kfree(td);
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| static int c67x00_add_data_urb(struct c67x00_hcd *c67x00, struct urb *urb)
 | |
| {
 | |
| 	int remaining;
 | |
| 	int toggle;
 | |
| 	int pid;
 | |
| 	int ret = 0;
 | |
| 	int maxps;
 | |
| 	int need_empty;
 | |
| 
 | |
| 	toggle = usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe),
 | |
| 			       usb_pipeout(urb->pipe));
 | |
| 	remaining = urb->transfer_buffer_length - urb->actual_length;
 | |
| 
 | |
| 	maxps = usb_maxpacket(urb->dev, urb->pipe);
 | |
| 
 | |
| 	need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
 | |
| 	    usb_pipeout(urb->pipe) && !(remaining % maxps);
 | |
| 
 | |
| 	while (remaining || need_empty) {
 | |
| 		int len;
 | |
| 		char *td_buf;
 | |
| 
 | |
| 		len = (remaining > maxps) ? maxps : remaining;
 | |
| 		if (!len)
 | |
| 			need_empty = 0;
 | |
| 
 | |
| 		pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
 | |
| 		td_buf = urb->transfer_buffer + urb->transfer_buffer_length -
 | |
| 		    remaining;
 | |
| 		ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, toggle,
 | |
| 				       DATA_STAGE);
 | |
| 		if (ret)
 | |
| 			return ret;	/* td wasn't created */
 | |
| 
 | |
| 		toggle ^= 1;
 | |
| 		remaining -= len;
 | |
| 		if (usb_pipecontrol(urb->pipe))
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * return 0 in case more bandwidth is available, else errorcode
 | |
|  */
 | |
| static int c67x00_add_ctrl_urb(struct c67x00_hcd *c67x00, struct urb *urb)
 | |
| {
 | |
| 	int ret;
 | |
| 	int pid;
 | |
| 
 | |
| 	switch (urb->interval) {
 | |
| 	default:
 | |
| 	case SETUP_STAGE:
 | |
| 		ret = c67x00_create_td(c67x00, urb, urb->setup_packet,
 | |
| 				       8, USB_PID_SETUP, 0, SETUP_STAGE);
 | |
| 		if (ret)
 | |
| 			return ret;
 | |
| 		urb->interval = SETUP_STAGE;
 | |
| 		usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
 | |
| 			      usb_pipeout(urb->pipe), 1);
 | |
| 		break;
 | |
| 	case DATA_STAGE:
 | |
| 		if (urb->transfer_buffer_length) {
 | |
| 			ret = c67x00_add_data_urb(c67x00, urb);
 | |
| 			if (ret)
 | |
| 				return ret;
 | |
| 			break;
 | |
| 		}
 | |
| 		fallthrough;
 | |
| 	case STATUS_STAGE:
 | |
| 		pid = !usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
 | |
| 		ret = c67x00_create_td(c67x00, urb, NULL, 0, pid, 1,
 | |
| 				       STATUS_STAGE);
 | |
| 		if (ret)
 | |
| 			return ret;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * return 0 in case more bandwidth is available, else errorcode
 | |
|  */
 | |
| static int c67x00_add_int_urb(struct c67x00_hcd *c67x00, struct urb *urb)
 | |
| {
 | |
| 	struct c67x00_urb_priv *urbp = urb->hcpriv;
 | |
| 
 | |
| 	if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
 | |
| 		urbp->ep_data->next_frame =
 | |
| 		    frame_add(urbp->ep_data->next_frame, urb->interval);
 | |
| 		return c67x00_add_data_urb(c67x00, urb);
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int c67x00_add_iso_urb(struct c67x00_hcd *c67x00, struct urb *urb)
 | |
| {
 | |
| 	struct c67x00_urb_priv *urbp = urb->hcpriv;
 | |
| 
 | |
| 	if (frame_after_eq(c67x00->current_frame, urbp->ep_data->next_frame)) {
 | |
| 		char *td_buf;
 | |
| 		int len, pid, ret;
 | |
| 
 | |
| 		BUG_ON(urbp->cnt >= urb->number_of_packets);
 | |
| 
 | |
| 		td_buf = urb->transfer_buffer +
 | |
| 		    urb->iso_frame_desc[urbp->cnt].offset;
 | |
| 		len = urb->iso_frame_desc[urbp->cnt].length;
 | |
| 		pid = usb_pipeout(urb->pipe) ? USB_PID_OUT : USB_PID_IN;
 | |
| 
 | |
| 		ret = c67x00_create_td(c67x00, urb, td_buf, len, pid, 0,
 | |
| 				       urbp->cnt);
 | |
| 		if (ret) {
 | |
| 			dev_dbg(c67x00_hcd_dev(c67x00), "create failed: %d\n",
 | |
| 				ret);
 | |
| 			urb->iso_frame_desc[urbp->cnt].actual_length = 0;
 | |
| 			urb->iso_frame_desc[urbp->cnt].status = ret;
 | |
| 			if (urbp->cnt + 1 == urb->number_of_packets)
 | |
| 				c67x00_giveback_urb(c67x00, urb, 0);
 | |
| 		}
 | |
| 
 | |
| 		urbp->ep_data->next_frame =
 | |
| 		    frame_add(urbp->ep_data->next_frame, urb->interval);
 | |
| 		urbp->cnt++;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| static void c67x00_fill_from_list(struct c67x00_hcd *c67x00, int type,
 | |
| 				  int (*add)(struct c67x00_hcd *, struct urb *))
 | |
| {
 | |
| 	struct c67x00_ep_data *ep_data;
 | |
| 	struct urb *urb;
 | |
| 
 | |
| 	/* traverse every endpoint on the list */
 | |
| 	list_for_each_entry(ep_data, &c67x00->list[type], node) {
 | |
| 		if (!list_empty(&ep_data->queue)) {
 | |
| 			/* and add the first urb */
 | |
| 			/* isochronous transfer rely on this */
 | |
| 			urb = list_entry(ep_data->queue.next,
 | |
| 					 struct c67x00_urb_priv,
 | |
| 					 hep_node)->urb;
 | |
| 			add(c67x00, urb);
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void c67x00_fill_frame(struct c67x00_hcd *c67x00)
 | |
| {
 | |
| 	struct c67x00_td *td, *ttd;
 | |
| 
 | |
| 	/* Check if we can proceed */
 | |
| 	if (!list_empty(&c67x00->td_list)) {
 | |
| 		dev_warn(c67x00_hcd_dev(c67x00),
 | |
| 			 "TD list not empty! This should not happen!\n");
 | |
| 		list_for_each_entry_safe(td, ttd, &c67x00->td_list, td_list) {
 | |
| 			dbg_td(c67x00, td, "Unprocessed td");
 | |
| 			c67x00_release_td(td);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* Reinitialize variables */
 | |
| 	c67x00->bandwidth_allocated = 0;
 | |
| 	c67x00->periodic_bw_allocated = 0;
 | |
| 
 | |
| 	c67x00->next_td_addr = c67x00->td_base_addr;
 | |
| 	c67x00->next_buf_addr = c67x00->buf_base_addr;
 | |
| 
 | |
| 	/* Fill the list */
 | |
| 	c67x00_fill_from_list(c67x00, PIPE_ISOCHRONOUS, c67x00_add_iso_urb);
 | |
| 	c67x00_fill_from_list(c67x00, PIPE_INTERRUPT, c67x00_add_int_urb);
 | |
| 	c67x00_fill_from_list(c67x00, PIPE_CONTROL, c67x00_add_ctrl_urb);
 | |
| 	c67x00_fill_from_list(c67x00, PIPE_BULK, c67x00_add_data_urb);
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| /*
 | |
|  * Get TD from C67X00
 | |
|  */
 | |
| static inline void
 | |
| c67x00_parse_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
 | |
| {
 | |
| 	c67x00_ll_read_mem_le16(c67x00->sie->dev,
 | |
| 				td->td_addr, td, CY_TD_SIZE);
 | |
| 
 | |
| 	if (usb_pipein(td->pipe) && td_actual_bytes(td))
 | |
| 		c67x00_ll_read_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
 | |
| 					td->data, td_actual_bytes(td));
 | |
| }
 | |
| 
 | |
| static int c67x00_td_to_error(struct c67x00_hcd *c67x00, struct c67x00_td *td)
 | |
| {
 | |
| 	if (td->status & TD_STATUSMASK_ERR) {
 | |
| 		dbg_td(c67x00, td, "ERROR_FLAG");
 | |
| 		return -EILSEQ;
 | |
| 	}
 | |
| 	if (td->status & TD_STATUSMASK_STALL) {
 | |
| 		/* dbg_td(c67x00, td, "STALL"); */
 | |
| 		return -EPIPE;
 | |
| 	}
 | |
| 	if (td->status & TD_STATUSMASK_TMOUT) {
 | |
| 		dbg_td(c67x00, td, "TIMEOUT");
 | |
| 		return -ETIMEDOUT;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static inline int c67x00_end_of_data(struct c67x00_td *td)
 | |
| {
 | |
| 	int maxps, need_empty, remaining;
 | |
| 	struct urb *urb = td->urb;
 | |
| 	int act_bytes;
 | |
| 
 | |
| 	act_bytes = td_actual_bytes(td);
 | |
| 
 | |
| 	if (unlikely(!act_bytes))
 | |
| 		return 1;	/* This was an empty packet */
 | |
| 
 | |
| 	maxps = usb_maxpacket(td_udev(td), td->pipe);
 | |
| 
 | |
| 	if (unlikely(act_bytes < maxps))
 | |
| 		return 1;	/* Smaller then full packet */
 | |
| 
 | |
| 	remaining = urb->transfer_buffer_length - urb->actual_length;
 | |
| 	need_empty = (urb->transfer_flags & URB_ZERO_PACKET) &&
 | |
| 	    usb_pipeout(urb->pipe) && !(remaining % maxps);
 | |
| 
 | |
| 	if (unlikely(!remaining && !need_empty))
 | |
| 		return 1;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| /* Remove all td's from the list which come
 | |
|  * after last_td and are meant for the same pipe.
 | |
|  * This is used when a short packet has occurred */
 | |
| static inline void c67x00_clear_pipe(struct c67x00_hcd *c67x00,
 | |
| 				     struct c67x00_td *last_td)
 | |
| {
 | |
| 	struct c67x00_td *td, *tmp;
 | |
| 	td = last_td;
 | |
| 	tmp = last_td;
 | |
| 	while (td->td_list.next != &c67x00->td_list) {
 | |
| 		td = list_entry(td->td_list.next, struct c67x00_td, td_list);
 | |
| 		if (td->pipe == last_td->pipe) {
 | |
| 			c67x00_release_td(td);
 | |
| 			td = tmp;
 | |
| 		}
 | |
| 		tmp = td;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| static void c67x00_handle_successful_td(struct c67x00_hcd *c67x00,
 | |
| 					struct c67x00_td *td)
 | |
| {
 | |
| 	struct urb *urb = td->urb;
 | |
| 
 | |
| 	if (!urb)
 | |
| 		return;
 | |
| 
 | |
| 	urb->actual_length += td_actual_bytes(td);
 | |
| 
 | |
| 	switch (usb_pipetype(td->pipe)) {
 | |
| 		/* isochronous tds are handled separately */
 | |
| 	case PIPE_CONTROL:
 | |
| 		switch (td->privdata) {
 | |
| 		case SETUP_STAGE:
 | |
| 			urb->interval =
 | |
| 			    urb->transfer_buffer_length ?
 | |
| 			    DATA_STAGE : STATUS_STAGE;
 | |
| 			/* Don't count setup_packet with normal data: */
 | |
| 			urb->actual_length = 0;
 | |
| 			break;
 | |
| 
 | |
| 		case DATA_STAGE:
 | |
| 			if (c67x00_end_of_data(td)) {
 | |
| 				urb->interval = STATUS_STAGE;
 | |
| 				c67x00_clear_pipe(c67x00, td);
 | |
| 			}
 | |
| 			break;
 | |
| 
 | |
| 		case STATUS_STAGE:
 | |
| 			urb->interval = 0;
 | |
| 			c67x00_giveback_urb(c67x00, urb, 0);
 | |
| 			break;
 | |
| 		}
 | |
| 		break;
 | |
| 
 | |
| 	case PIPE_INTERRUPT:
 | |
| 	case PIPE_BULK:
 | |
| 		if (unlikely(c67x00_end_of_data(td))) {
 | |
| 			c67x00_clear_pipe(c67x00, td);
 | |
| 			c67x00_giveback_urb(c67x00, urb, 0);
 | |
| 		}
 | |
| 		break;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void c67x00_handle_isoc(struct c67x00_hcd *c67x00, struct c67x00_td *td)
 | |
| {
 | |
| 	struct urb *urb = td->urb;
 | |
| 	int cnt;
 | |
| 
 | |
| 	if (!urb)
 | |
| 		return;
 | |
| 
 | |
| 	cnt = td->privdata;
 | |
| 
 | |
| 	if (td->status & TD_ERROR_MASK)
 | |
| 		urb->error_count++;
 | |
| 
 | |
| 	urb->iso_frame_desc[cnt].actual_length = td_actual_bytes(td);
 | |
| 	urb->iso_frame_desc[cnt].status = c67x00_td_to_error(c67x00, td);
 | |
| 	if (cnt + 1 == urb->number_of_packets)	/* Last packet */
 | |
| 		c67x00_giveback_urb(c67x00, urb, 0);
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| /*
 | |
|  * c67x00_check_td_list - handle tds which have been processed by the c67x00
 | |
|  * pre: current_td == 0
 | |
|  */
 | |
| static inline void c67x00_check_td_list(struct c67x00_hcd *c67x00)
 | |
| {
 | |
| 	struct c67x00_td *td, *tmp;
 | |
| 	struct urb *urb;
 | |
| 	int ack_ok;
 | |
| 	int clear_endpoint;
 | |
| 
 | |
| 	list_for_each_entry_safe(td, tmp, &c67x00->td_list, td_list) {
 | |
| 		/* get the TD */
 | |
| 		c67x00_parse_td(c67x00, td);
 | |
| 		urb = td->urb;	/* urb can be NULL! */
 | |
| 		ack_ok = 0;
 | |
| 		clear_endpoint = 1;
 | |
| 
 | |
| 		/* Handle isochronous transfers separately */
 | |
| 		if (usb_pipeisoc(td->pipe)) {
 | |
| 			clear_endpoint = 0;
 | |
| 			c67x00_handle_isoc(c67x00, td);
 | |
| 			goto cont;
 | |
| 		}
 | |
| 
 | |
| 		/* When an error occurs, all td's for that pipe go into an
 | |
| 		 * inactive state. This state matches successful transfers so
 | |
| 		 * we must make sure not to service them. */
 | |
| 		if (td->status & TD_ERROR_MASK) {
 | |
| 			c67x00_giveback_urb(c67x00, urb,
 | |
| 					    c67x00_td_to_error(c67x00, td));
 | |
| 			goto cont;
 | |
| 		}
 | |
| 
 | |
| 		if ((td->status & TD_STATUSMASK_NAK) || !td_sequence_ok(td) ||
 | |
| 		    !td_acked(td))
 | |
| 			goto cont;
 | |
| 
 | |
| 		/* Sequence ok and acked, don't need to fix toggle */
 | |
| 		ack_ok = 1;
 | |
| 
 | |
| 		if (unlikely(td->status & TD_STATUSMASK_OVF)) {
 | |
| 			if (td_residue(td) & TD_RESIDUE_OVERFLOW) {
 | |
| 				/* Overflow */
 | |
| 				c67x00_giveback_urb(c67x00, urb, -EOVERFLOW);
 | |
| 				goto cont;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		clear_endpoint = 0;
 | |
| 		c67x00_handle_successful_td(c67x00, td);
 | |
| 
 | |
| cont:
 | |
| 		if (clear_endpoint)
 | |
| 			c67x00_clear_pipe(c67x00, td);
 | |
| 		if (ack_ok)
 | |
| 			usb_settoggle(td_udev(td), usb_pipeendpoint(td->pipe),
 | |
| 				      usb_pipeout(td->pipe),
 | |
| 				      !(td->ctrl_reg & SEQ_SEL));
 | |
| 		/* next in list could have been removed, due to clear_pipe! */
 | |
| 		tmp = list_entry(td->td_list.next, typeof(*td), td_list);
 | |
| 		c67x00_release_td(td);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| static inline int c67x00_all_tds_processed(struct c67x00_hcd *c67x00)
 | |
| {
 | |
| 	/* If all tds are processed, we can check the previous frame (if
 | |
| 	 * there was any) and start our next frame.
 | |
| 	 */
 | |
| 	return !c67x00_ll_husb_get_current_td(c67x00->sie);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Send td to C67X00
 | |
|  */
 | |
| static void c67x00_send_td(struct c67x00_hcd *c67x00, struct c67x00_td *td)
 | |
| {
 | |
| 	int len = td_length(td);
 | |
| 
 | |
| 	if (len && ((td->pid_ep & TD_PIDEPMASK_PID) != TD_PID_IN))
 | |
| 		c67x00_ll_write_mem_le16(c67x00->sie->dev, td_ly_base_addr(td),
 | |
| 					 td->data, len);
 | |
| 
 | |
| 	c67x00_ll_write_mem_le16(c67x00->sie->dev,
 | |
| 				 td->td_addr, td, CY_TD_SIZE);
 | |
| }
 | |
| 
 | |
| static void c67x00_send_frame(struct c67x00_hcd *c67x00)
 | |
| {
 | |
| 	struct c67x00_td *td;
 | |
| 
 | |
| 	if (list_empty(&c67x00->td_list))
 | |
| 		dev_warn(c67x00_hcd_dev(c67x00),
 | |
| 			 "%s: td list should not be empty here!\n",
 | |
| 			 __func__);
 | |
| 
 | |
| 	list_for_each_entry(td, &c67x00->td_list, td_list) {
 | |
| 		if (td->td_list.next == &c67x00->td_list)
 | |
| 			td->next_td_addr = 0;	/* Last td in list */
 | |
| 
 | |
| 		c67x00_send_td(c67x00, td);
 | |
| 	}
 | |
| 
 | |
| 	c67x00_ll_husb_set_current_td(c67x00->sie, c67x00->td_base_addr);
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| /*
 | |
|  * c67x00_do_work - Schedulers state machine
 | |
|  */
 | |
| static void c67x00_do_work(struct c67x00_hcd *c67x00)
 | |
| {
 | |
| 	spin_lock(&c67x00->lock);
 | |
| 	/* Make sure all tds are processed */
 | |
| 	if (!c67x00_all_tds_processed(c67x00))
 | |
| 		goto out;
 | |
| 
 | |
| 	c67x00_check_td_list(c67x00);
 | |
| 
 | |
| 	/* no td's are being processed (current == 0)
 | |
| 	 * and all have been "checked" */
 | |
| 	complete(&c67x00->endpoint_disable);
 | |
| 
 | |
| 	if (!list_empty(&c67x00->td_list))
 | |
| 		goto out;
 | |
| 
 | |
| 	c67x00->current_frame = c67x00_get_current_frame_number(c67x00);
 | |
| 	if (c67x00->current_frame == c67x00->last_frame)
 | |
| 		goto out;	/* Don't send tds in same frame */
 | |
| 	c67x00->last_frame = c67x00->current_frame;
 | |
| 
 | |
| 	/* If no urbs are scheduled, our work is done */
 | |
| 	if (!c67x00->urb_count) {
 | |
| 		c67x00_ll_hpi_disable_sofeop(c67x00->sie);
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	c67x00_fill_frame(c67x00);
 | |
| 	if (!list_empty(&c67x00->td_list))
 | |
| 		/* TD's have been added to the frame */
 | |
| 		c67x00_send_frame(c67x00);
 | |
| 
 | |
|  out:
 | |
| 	spin_unlock(&c67x00->lock);
 | |
| }
 | |
| 
 | |
| /* -------------------------------------------------------------------------- */
 | |
| 
 | |
| static void c67x00_sched_work(struct work_struct *work)
 | |
| {
 | |
| 	struct c67x00_hcd *c67x00;
 | |
| 
 | |
| 	c67x00 = container_of(work, struct c67x00_hcd, work);
 | |
| 	c67x00_do_work(c67x00);
 | |
| }
 | |
| 
 | |
| void c67x00_sched_kick(struct c67x00_hcd *c67x00)
 | |
| {
 | |
| 	queue_work(system_highpri_wq, &c67x00->work);
 | |
| }
 | |
| 
 | |
| int c67x00_sched_start_scheduler(struct c67x00_hcd *c67x00)
 | |
| {
 | |
| 	INIT_WORK(&c67x00->work, c67x00_sched_work);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| void c67x00_sched_stop_scheduler(struct c67x00_hcd *c67x00)
 | |
| {
 | |
| 	cancel_work_sync(&c67x00->work);
 | |
| }
 |