2274 lines
		
	
	
		
			56 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			2274 lines
		
	
	
		
			56 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| /*
 | |
|  * Debugfs interface
 | |
|  *
 | |
|  * Copyright (C) 2020, Intel Corporation
 | |
|  * Authors: Gil Fine <gil.fine@intel.com>
 | |
|  *	    Mika Westerberg <mika.westerberg@linux.intel.com>
 | |
|  */
 | |
| 
 | |
| #include <linux/bitfield.h>
 | |
| #include <linux/debugfs.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/pm_runtime.h>
 | |
| #include <linux/uaccess.h>
 | |
| 
 | |
| #include "tb.h"
 | |
| #include "sb_regs.h"
 | |
| 
 | |
| #define PORT_CAP_V1_PCIE_LEN	1
 | |
| #define PORT_CAP_V2_PCIE_LEN	2
 | |
| #define PORT_CAP_POWER_LEN	2
 | |
| #define PORT_CAP_LANE_LEN	3
 | |
| #define PORT_CAP_USB3_LEN	5
 | |
| #define PORT_CAP_DP_V1_LEN	9
 | |
| #define PORT_CAP_DP_V2_LEN	14
 | |
| #define PORT_CAP_TMU_V1_LEN	8
 | |
| #define PORT_CAP_TMU_V2_LEN	10
 | |
| #define PORT_CAP_BASIC_LEN	9
 | |
| #define PORT_CAP_USB4_LEN	20
 | |
| 
 | |
| #define SWITCH_CAP_TMU_LEN	26
 | |
| #define SWITCH_CAP_BASIC_LEN	27
 | |
| 
 | |
| #define PATH_LEN		2
 | |
| 
 | |
| #define COUNTER_SET_LEN		3
 | |
| 
 | |
| /*
 | |
|  * USB4 spec doesn't specify dwell range, the range of 100 ms to 500 ms
 | |
|  * probed to give good results.
 | |
|  */
 | |
| #define MIN_DWELL_TIME		100 /* ms */
 | |
| #define MAX_DWELL_TIME		500 /* ms */
 | |
| #define DWELL_SAMPLE_INTERVAL	10
 | |
| 
 | |
| /* Sideband registers and their sizes as defined in the USB4 spec */
 | |
| struct sb_reg {
 | |
| 	unsigned int reg;
 | |
| 	unsigned int size;
 | |
| };
 | |
| 
 | |
| #define SB_MAX_SIZE		64
 | |
| 
 | |
| /* Sideband registers for router */
 | |
| static const struct sb_reg port_sb_regs[] = {
 | |
| 	{ USB4_SB_VENDOR_ID, 4 },
 | |
| 	{ USB4_SB_PRODUCT_ID, 4 },
 | |
| 	{ USB4_SB_DEBUG_CONF, 4 },
 | |
| 	{ USB4_SB_DEBUG, 54 },
 | |
| 	{ USB4_SB_LRD_TUNING, 4 },
 | |
| 	{ USB4_SB_OPCODE, 4 },
 | |
| 	{ USB4_SB_METADATA, 4 },
 | |
| 	{ USB4_SB_LINK_CONF, 3 },
 | |
| 	{ USB4_SB_GEN23_TXFFE, 4 },
 | |
| 	{ USB4_SB_GEN4_TXFFE, 4 },
 | |
| 	{ USB4_SB_VERSION, 4 },
 | |
| 	{ USB4_SB_DATA, 64 },
 | |
| };
 | |
| 
 | |
| /* Sideband registers for retimer */
 | |
| static const struct sb_reg retimer_sb_regs[] = {
 | |
| 	{ USB4_SB_VENDOR_ID, 4 },
 | |
| 	{ USB4_SB_PRODUCT_ID, 4 },
 | |
| 	{ USB4_SB_FW_VERSION, 4 },
 | |
| 	{ USB4_SB_LRD_TUNING, 4 },
 | |
| 	{ USB4_SB_OPCODE, 4 },
 | |
| 	{ USB4_SB_METADATA, 4 },
 | |
| 	{ USB4_SB_GEN23_TXFFE, 4 },
 | |
| 	{ USB4_SB_GEN4_TXFFE, 4 },
 | |
| 	{ USB4_SB_VERSION, 4 },
 | |
| 	{ USB4_SB_DATA, 64 },
 | |
| };
 | |
| 
 | |
| #define DEBUGFS_ATTR(__space, __write)					\
 | |
| static int __space ## _open(struct inode *inode, struct file *file)	\
 | |
| {									\
 | |
| 	return single_open(file, __space ## _show, inode->i_private);	\
 | |
| }									\
 | |
| 									\
 | |
| static const struct file_operations __space ## _fops = {		\
 | |
| 	.owner = THIS_MODULE,						\
 | |
| 	.open = __space ## _open,					\
 | |
| 	.release = single_release,					\
 | |
| 	.read  = seq_read,						\
 | |
| 	.write = __write,						\
 | |
| 	.llseek = seq_lseek,						\
 | |
| }
 | |
| 
 | |
| #define DEBUGFS_ATTR_RO(__space)					\
 | |
| 	DEBUGFS_ATTR(__space, NULL)
 | |
| 
 | |
| #define DEBUGFS_ATTR_RW(__space)					\
 | |
| 	DEBUGFS_ATTR(__space, __space ## _write)
 | |
| 
 | |
| static struct dentry *tb_debugfs_root;
 | |
| 
 | |
| static void *validate_and_copy_from_user(const void __user *user_buf,
 | |
| 					 size_t *count)
 | |
| {
 | |
| 	size_t nbytes;
 | |
| 	void *buf;
 | |
| 
 | |
| 	if (!*count)
 | |
| 		return ERR_PTR(-EINVAL);
 | |
| 
 | |
| 	if (!access_ok(user_buf, *count))
 | |
| 		return ERR_PTR(-EFAULT);
 | |
| 
 | |
| 	buf = (void *)get_zeroed_page(GFP_KERNEL);
 | |
| 	if (!buf)
 | |
| 		return ERR_PTR(-ENOMEM);
 | |
| 
 | |
| 	nbytes = min_t(size_t, *count, PAGE_SIZE);
 | |
| 	if (copy_from_user(buf, user_buf, nbytes)) {
 | |
| 		free_page((unsigned long)buf);
 | |
| 		return ERR_PTR(-EFAULT);
 | |
| 	}
 | |
| 
 | |
| 	*count = nbytes;
 | |
| 	return buf;
 | |
| }
 | |
| 
 | |
| static bool parse_line(char **line, u32 *offs, u32 *val, int short_fmt_len,
 | |
| 		       int long_fmt_len)
 | |
| {
 | |
| 	char *token;
 | |
| 	u32 v[5];
 | |
| 	int ret;
 | |
| 
 | |
| 	token = strsep(line, "\n");
 | |
| 	if (!token)
 | |
| 		return false;
 | |
| 
 | |
| 	/*
 | |
| 	 * For Adapter/Router configuration space:
 | |
| 	 * Short format is: offset value\n
 | |
| 	 *		    v[0]   v[1]
 | |
| 	 * Long format as produced from the read side:
 | |
| 	 * offset relative_offset cap_id vs_cap_id value\n
 | |
| 	 * v[0]   v[1]            v[2]   v[3]      v[4]
 | |
| 	 *
 | |
| 	 * For Counter configuration space:
 | |
| 	 * Short format is: offset\n
 | |
| 	 *		    v[0]
 | |
| 	 * Long format as produced from the read side:
 | |
| 	 * offset relative_offset counter_id value\n
 | |
| 	 * v[0]   v[1]            v[2]       v[3]
 | |
| 	 */
 | |
| 	ret = sscanf(token, "%i %i %i %i %i", &v[0], &v[1], &v[2], &v[3], &v[4]);
 | |
| 	/* In case of Counters, clear counter, "val" content is NA */
 | |
| 	if (ret == short_fmt_len) {
 | |
| 		*offs = v[0];
 | |
| 		*val = v[short_fmt_len - 1];
 | |
| 		return true;
 | |
| 	} else if (ret == long_fmt_len) {
 | |
| 		*offs = v[0];
 | |
| 		*val = v[long_fmt_len - 1];
 | |
| 		return true;
 | |
| 	}
 | |
| 
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| #if IS_ENABLED(CONFIG_USB4_DEBUGFS_WRITE)
 | |
| static ssize_t regs_write(struct tb_switch *sw, struct tb_port *port,
 | |
| 			  const char __user *user_buf, size_t count,
 | |
| 			  loff_t *ppos)
 | |
| {
 | |
| 	struct tb *tb = sw->tb;
 | |
| 	char *line, *buf;
 | |
| 	u32 val, offset;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	buf = validate_and_copy_from_user(user_buf, &count);
 | |
| 	if (IS_ERR(buf))
 | |
| 		return PTR_ERR(buf);
 | |
| 
 | |
| 	pm_runtime_get_sync(&sw->dev);
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* User did hardware changes behind the driver's back */
 | |
| 	add_taint(TAINT_USER, LOCKDEP_STILL_OK);
 | |
| 
 | |
| 	line = buf;
 | |
| 	while (parse_line(&line, &offset, &val, 2, 5)) {
 | |
| 		if (port)
 | |
| 			ret = tb_port_write(port, &val, TB_CFG_PORT, offset, 1);
 | |
| 		else
 | |
| 			ret = tb_sw_write(sw, &val, TB_CFG_SWITCH, offset, 1);
 | |
| 		if (ret)
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 
 | |
| out:
 | |
| 	pm_runtime_mark_last_busy(&sw->dev);
 | |
| 	pm_runtime_put_autosuspend(&sw->dev);
 | |
| 	free_page((unsigned long)buf);
 | |
| 
 | |
| 	return ret < 0 ? ret : count;
 | |
| }
 | |
| 
 | |
| static ssize_t port_regs_write(struct file *file, const char __user *user_buf,
 | |
| 			       size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_port *port = s->private;
 | |
| 
 | |
| 	return regs_write(port->sw, port, user_buf, count, ppos);
 | |
| }
 | |
| 
 | |
| static ssize_t switch_regs_write(struct file *file, const char __user *user_buf,
 | |
| 				 size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_switch *sw = s->private;
 | |
| 
 | |
| 	return regs_write(sw, NULL, user_buf, count, ppos);
 | |
| }
 | |
| 
 | |
| static bool parse_sb_line(char **line, u8 *reg, u8 *data, size_t data_size,
 | |
| 			  size_t *bytes_read)
 | |
| {
 | |
| 	char *field, *token;
 | |
| 	int i;
 | |
| 
 | |
| 	token = strsep(line, "\n");
 | |
| 	if (!token)
 | |
| 		return false;
 | |
| 
 | |
| 	/* Parse the register first */
 | |
| 	field = strsep(&token, " ");
 | |
| 	if (!field)
 | |
| 		return false;
 | |
| 	if (kstrtou8(field, 0, reg))
 | |
| 		return false;
 | |
| 
 | |
| 	/* Then the values for the register, up to data_size */
 | |
| 	for (i = 0; i < data_size; i++) {
 | |
| 		field = strsep(&token, " ");
 | |
| 		if (!field)
 | |
| 			break;
 | |
| 		if (kstrtou8(field, 0, &data[i]))
 | |
| 			return false;
 | |
| 	}
 | |
| 
 | |
| 	*bytes_read = i;
 | |
| 	return true;
 | |
| }
 | |
| 
 | |
| static ssize_t sb_regs_write(struct tb_port *port, const struct sb_reg *sb_regs,
 | |
| 			     size_t size, enum usb4_sb_target target, u8 index,
 | |
| 			     char *buf, size_t count, loff_t *ppos)
 | |
| {
 | |
| 	u8 reg, data[SB_MAX_SIZE];
 | |
| 	size_t bytes_read;
 | |
| 	char *line = buf;
 | |
| 
 | |
| 	/* User did hardware changes behind the driver's back */
 | |
| 	add_taint(TAINT_USER, LOCKDEP_STILL_OK);
 | |
| 
 | |
| 	/*
 | |
| 	 * For sideband registers we accept:
 | |
| 	 * reg b0 b1 b2...\n
 | |
| 	 *
 | |
| 	 * Here "reg" is the byte offset of the sideband register and "b0"..
 | |
| 	 * are the byte values. There can be less byte values than the register
 | |
| 	 * size. The leftovers will not be overwritten.
 | |
| 	 */
 | |
| 	while (parse_sb_line(&line, ®, data, ARRAY_SIZE(data), &bytes_read)) {
 | |
| 		const struct sb_reg *sb_reg;
 | |
| 		int ret;
 | |
| 
 | |
| 		/* At least one byte must be passed */
 | |
| 		if (bytes_read < 1)
 | |
| 			return -EINVAL;
 | |
| 
 | |
| 		/* Find the register */
 | |
| 		sb_reg = NULL;
 | |
| 		for (int i = 0; i < size; i++) {
 | |
| 			if (sb_regs[i].reg == reg) {
 | |
| 				sb_reg = &sb_regs[i];
 | |
| 				break;
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		if (!sb_reg)
 | |
| 			return -EINVAL;
 | |
| 
 | |
| 		if (bytes_read > sb_regs->size)
 | |
| 			return -E2BIG;
 | |
| 
 | |
| 		ret = usb4_port_sb_write(port, target, index, sb_reg->reg, data,
 | |
| 					 bytes_read);
 | |
| 		if (ret)
 | |
| 			return ret;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static ssize_t port_sb_regs_write(struct file *file, const char __user *user_buf,
 | |
| 				  size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_port *port = s->private;
 | |
| 	struct tb_switch *sw = port->sw;
 | |
| 	struct tb *tb = sw->tb;
 | |
| 	char *buf;
 | |
| 	int ret;
 | |
| 
 | |
| 	buf = validate_and_copy_from_user(user_buf, &count);
 | |
| 	if (IS_ERR(buf))
 | |
| 		return PTR_ERR(buf);
 | |
| 
 | |
| 	pm_runtime_get_sync(&sw->dev);
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	ret = sb_regs_write(port, port_sb_regs, ARRAY_SIZE(port_sb_regs),
 | |
| 			    USB4_SB_TARGET_ROUTER, 0, buf, count, ppos);
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| out:
 | |
| 	pm_runtime_mark_last_busy(&sw->dev);
 | |
| 	pm_runtime_put_autosuspend(&sw->dev);
 | |
| 	free_page((unsigned long)buf);
 | |
| 
 | |
| 	return ret < 0 ? ret : count;
 | |
| }
 | |
| 
 | |
| static ssize_t retimer_sb_regs_write(struct file *file,
 | |
| 				     const char __user *user_buf,
 | |
| 				     size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_retimer *rt = s->private;
 | |
| 	struct tb *tb = rt->tb;
 | |
| 	char *buf;
 | |
| 	int ret;
 | |
| 
 | |
| 	buf = validate_and_copy_from_user(user_buf, &count);
 | |
| 	if (IS_ERR(buf))
 | |
| 		return PTR_ERR(buf);
 | |
| 
 | |
| 	pm_runtime_get_sync(&rt->dev);
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	ret = sb_regs_write(rt->port, retimer_sb_regs, ARRAY_SIZE(retimer_sb_regs),
 | |
| 			    USB4_SB_TARGET_RETIMER, rt->index, buf, count, ppos);
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| out:
 | |
| 	pm_runtime_mark_last_busy(&rt->dev);
 | |
| 	pm_runtime_put_autosuspend(&rt->dev);
 | |
| 	free_page((unsigned long)buf);
 | |
| 
 | |
| 	return ret < 0 ? ret : count;
 | |
| }
 | |
| #define DEBUGFS_MODE		0600
 | |
| #else
 | |
| #define port_regs_write		NULL
 | |
| #define switch_regs_write	NULL
 | |
| #define port_sb_regs_write	NULL
 | |
| #define retimer_sb_regs_write	NULL
 | |
| #define DEBUGFS_MODE		0400
 | |
| #endif
 | |
| 
 | |
| #if IS_ENABLED(CONFIG_USB4_DEBUGFS_MARGINING)
 | |
| /**
 | |
|  * struct tb_margining - Lane margining support
 | |
|  * @port: USB4 port through which the margining operations are run
 | |
|  * @target: Sideband target
 | |
|  * @index: Retimer index if taget is %USB4_SB_TARGET_RETIMER
 | |
|  * @dev: Pointer to the device that is the target (USB4 port or retimer)
 | |
|  * @caps: Port lane margining capabilities
 | |
|  * @results: Last lane margining results
 | |
|  * @lanes: %0, %1 or %7 (all)
 | |
|  * @min_ber_level: Minimum supported BER level contour value
 | |
|  * @max_ber_level: Maximum supported BER level contour value
 | |
|  * @ber_level: Current BER level contour value
 | |
|  * @voltage_steps: Number of mandatory voltage steps
 | |
|  * @max_voltage_offset: Maximum mandatory voltage offset (in mV)
 | |
|  * @voltage_steps_optional_range: Number of voltage steps for optional range
 | |
|  * @max_voltage_offset_optional_range: Maximum voltage offset for the optional
 | |
|  *					range (in mV).
 | |
|  * @time_steps: Number of time margin steps
 | |
|  * @max_time_offset: Maximum time margin offset (in mUI)
 | |
|  * @voltage_time_offset: Offset for voltage / time for software margining
 | |
|  * @dwell_time: Dwell time for software margining (in ms)
 | |
|  * @error_counter: Error counter operation for software margining
 | |
|  * @optional_voltage_offset_range: Enable optional extended voltage range
 | |
|  * @software: %true if software margining is used instead of hardware
 | |
|  * @time: %true if time margining is used instead of voltage
 | |
|  * @right_high: %false if left/low margin test is performed, %true if
 | |
|  *		right/high
 | |
|  */
 | |
| struct tb_margining {
 | |
| 	struct tb_port *port;
 | |
| 	enum usb4_sb_target target;
 | |
| 	u8 index;
 | |
| 	struct device *dev;
 | |
| 	u32 caps[2];
 | |
| 	u32 results[2];
 | |
| 	unsigned int lanes;
 | |
| 	unsigned int min_ber_level;
 | |
| 	unsigned int max_ber_level;
 | |
| 	unsigned int ber_level;
 | |
| 	unsigned int voltage_steps;
 | |
| 	unsigned int max_voltage_offset;
 | |
| 	unsigned int voltage_steps_optional_range;
 | |
| 	unsigned int max_voltage_offset_optional_range;
 | |
| 	unsigned int time_steps;
 | |
| 	unsigned int max_time_offset;
 | |
| 	unsigned int voltage_time_offset;
 | |
| 	unsigned int dwell_time;
 | |
| 	enum usb4_margin_sw_error_counter error_counter;
 | |
| 	bool optional_voltage_offset_range;
 | |
| 	bool software;
 | |
| 	bool time;
 | |
| 	bool right_high;
 | |
| };
 | |
| 
 | |
| static int margining_modify_error_counter(struct tb_margining *margining,
 | |
| 	u32 lanes, enum usb4_margin_sw_error_counter error_counter)
 | |
| {
 | |
| 	struct usb4_port_margining_params params = { 0 };
 | |
| 	struct tb_port *port = margining->port;
 | |
| 	u32 result;
 | |
| 
 | |
| 	if (error_counter != USB4_MARGIN_SW_ERROR_COUNTER_CLEAR &&
 | |
| 	    error_counter != USB4_MARGIN_SW_ERROR_COUNTER_STOP)
 | |
| 		return -EOPNOTSUPP;
 | |
| 
 | |
| 	params.error_counter = error_counter;
 | |
| 	params.lanes = lanes;
 | |
| 
 | |
| 	return usb4_port_sw_margin(port, margining->target, margining->index,
 | |
| 				   ¶ms, &result);
 | |
| }
 | |
| 
 | |
| static bool supports_software(const struct tb_margining *margining)
 | |
| {
 | |
| 	return margining->caps[0] & USB4_MARGIN_CAP_0_MODES_SW;
 | |
| }
 | |
| 
 | |
| static bool supports_hardware(const struct tb_margining *margining)
 | |
| {
 | |
| 	return margining->caps[0] & USB4_MARGIN_CAP_0_MODES_HW;
 | |
| }
 | |
| 
 | |
| static bool both_lanes(const struct tb_margining *margining)
 | |
| {
 | |
| 	return margining->caps[0] & USB4_MARGIN_CAP_0_2_LANES;
 | |
| }
 | |
| 
 | |
| static unsigned int
 | |
| independent_voltage_margins(const struct tb_margining *margining)
 | |
| {
 | |
| 	return FIELD_GET(USB4_MARGIN_CAP_0_VOLTAGE_INDP_MASK, margining->caps[0]);
 | |
| }
 | |
| 
 | |
| static bool supports_time(const struct tb_margining *margining)
 | |
| {
 | |
| 	return margining->caps[0] & USB4_MARGIN_CAP_0_TIME;
 | |
| }
 | |
| 
 | |
| /* Only applicable if supports_time() returns true */
 | |
| static unsigned int
 | |
| independent_time_margins(const struct tb_margining *margining)
 | |
| {
 | |
| 	return FIELD_GET(USB4_MARGIN_CAP_1_TIME_INDP_MASK, margining->caps[1]);
 | |
| }
 | |
| 
 | |
| static bool
 | |
| supports_optional_voltage_offset_range(const struct tb_margining *margining)
 | |
| {
 | |
| 	return margining->caps[0] & USB4_MARGIN_CAP_0_OPT_VOLTAGE_SUPPORT;
 | |
| }
 | |
| 
 | |
| static ssize_t
 | |
| margining_ber_level_write(struct file *file, const char __user *user_buf,
 | |
| 			   size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	unsigned int val;
 | |
| 	int ret = 0;
 | |
| 	char *buf;
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	if (margining->software) {
 | |
| 		ret = -EINVAL;
 | |
| 		goto out_unlock;
 | |
| 	}
 | |
| 
 | |
| 	buf = validate_and_copy_from_user(user_buf, &count);
 | |
| 	if (IS_ERR(buf)) {
 | |
| 		ret = PTR_ERR(buf);
 | |
| 		goto out_unlock;
 | |
| 	}
 | |
| 
 | |
| 	buf[count - 1] = '\0';
 | |
| 
 | |
| 	ret = kstrtouint(buf, 10, &val);
 | |
| 	if (ret)
 | |
| 		goto out_free;
 | |
| 
 | |
| 	if (val < margining->min_ber_level ||
 | |
| 	    val > margining->max_ber_level) {
 | |
| 		ret = -EINVAL;
 | |
| 		goto out_free;
 | |
| 	}
 | |
| 
 | |
| 	margining->ber_level = val;
 | |
| 
 | |
| out_free:
 | |
| 	free_page((unsigned long)buf);
 | |
| out_unlock:
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 
 | |
| 	return ret < 0 ? ret : count;
 | |
| }
 | |
| 
 | |
| static void ber_level_show(struct seq_file *s, unsigned int val)
 | |
| {
 | |
| 	if (val % 2)
 | |
| 		seq_printf(s, "3 * 1e%d (%u)\n", -12 + (val + 1) / 2, val);
 | |
| 	else
 | |
| 		seq_printf(s, "1e%d (%u)\n", -12 + val / 2, val);
 | |
| }
 | |
| 
 | |
| static int margining_ber_level_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	const struct tb_margining *margining = s->private;
 | |
| 
 | |
| 	if (margining->software)
 | |
| 		return -EINVAL;
 | |
| 	ber_level_show(s, margining->ber_level);
 | |
| 	return 0;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(margining_ber_level);
 | |
| 
 | |
| static int margining_caps_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	u32 cap0, cap1;
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	/* Dump the raw caps first */
 | |
| 	cap0 = margining->caps[0];
 | |
| 	seq_printf(s, "0x%08x\n", cap0);
 | |
| 	cap1 = margining->caps[1];
 | |
| 	seq_printf(s, "0x%08x\n", cap1);
 | |
| 
 | |
| 	seq_printf(s, "# software margining: %s\n",
 | |
| 		   supports_software(margining) ? "yes" : "no");
 | |
| 	if (supports_hardware(margining)) {
 | |
| 		seq_puts(s, "# hardware margining: yes\n");
 | |
| 		seq_puts(s, "# minimum BER level contour: ");
 | |
| 		ber_level_show(s, margining->min_ber_level);
 | |
| 		seq_puts(s, "# maximum BER level contour: ");
 | |
| 		ber_level_show(s, margining->max_ber_level);
 | |
| 	} else {
 | |
| 		seq_puts(s, "# hardware margining: no\n");
 | |
| 	}
 | |
| 
 | |
| 	seq_printf(s, "# both lanes simultaneously: %s\n",
 | |
| 		  both_lanes(margining) ? "yes" : "no");
 | |
| 	seq_printf(s, "# voltage margin steps: %u\n",
 | |
| 		   margining->voltage_steps);
 | |
| 	seq_printf(s, "# maximum voltage offset: %u mV\n",
 | |
| 		   margining->max_voltage_offset);
 | |
| 	seq_printf(s, "# optional voltage offset range support: %s\n",
 | |
| 		   str_yes_no(supports_optional_voltage_offset_range(margining)));
 | |
| 	if (supports_optional_voltage_offset_range(margining)) {
 | |
| 		seq_printf(s, "# voltage margin steps, optional range: %u\n",
 | |
| 			   margining->voltage_steps_optional_range);
 | |
| 		seq_printf(s, "# maximum voltage offset, optional range: %u mV\n",
 | |
| 			   margining->max_voltage_offset_optional_range);
 | |
| 	}
 | |
| 
 | |
| 	switch (independent_voltage_margins(margining)) {
 | |
| 	case USB4_MARGIN_CAP_0_VOLTAGE_MIN:
 | |
| 		seq_puts(s, "# returns minimum between high and low voltage margins\n");
 | |
| 		break;
 | |
| 	case USB4_MARGIN_CAP_0_VOLTAGE_HL:
 | |
| 		seq_puts(s, "# returns high or low voltage margin\n");
 | |
| 		break;
 | |
| 	case USB4_MARGIN_CAP_0_VOLTAGE_BOTH:
 | |
| 		seq_puts(s, "# returns both high and low margins\n");
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	if (supports_time(margining)) {
 | |
| 		seq_puts(s, "# time margining: yes\n");
 | |
| 		seq_printf(s, "# time margining is destructive: %s\n",
 | |
| 			   cap1 & USB4_MARGIN_CAP_1_TIME_DESTR ? "yes" : "no");
 | |
| 
 | |
| 		switch (independent_time_margins(margining)) {
 | |
| 		case USB4_MARGIN_CAP_1_TIME_MIN:
 | |
| 			seq_puts(s, "# returns minimum between left and right time margins\n");
 | |
| 			break;
 | |
| 		case USB4_MARGIN_CAP_1_TIME_LR:
 | |
| 			seq_puts(s, "# returns left or right margin\n");
 | |
| 			break;
 | |
| 		case USB4_MARGIN_CAP_1_TIME_BOTH:
 | |
| 			seq_puts(s, "# returns both left and right margins\n");
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		seq_printf(s, "# time margin steps: %u\n",
 | |
| 			   margining->time_steps);
 | |
| 		seq_printf(s, "# maximum time offset: %u mUI\n",
 | |
| 			   margining->max_time_offset);
 | |
| 	} else {
 | |
| 		seq_puts(s, "# time margining: no\n");
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 	return 0;
 | |
| }
 | |
| DEBUGFS_ATTR_RO(margining_caps);
 | |
| 
 | |
| static ssize_t
 | |
| margining_lanes_write(struct file *file, const char __user *user_buf,
 | |
| 		      size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	int ret = 0;
 | |
| 	char *buf;
 | |
| 
 | |
| 	buf = validate_and_copy_from_user(user_buf, &count);
 | |
| 	if (IS_ERR(buf))
 | |
| 		return PTR_ERR(buf);
 | |
| 
 | |
| 	buf[count - 1] = '\0';
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out_free;
 | |
| 	}
 | |
| 
 | |
| 	if (!strcmp(buf, "0")) {
 | |
| 		margining->lanes = 0;
 | |
| 	} else if (!strcmp(buf, "1")) {
 | |
| 		margining->lanes = 1;
 | |
| 	} else if (!strcmp(buf, "all")) {
 | |
| 		/* Needs to be supported */
 | |
| 		if (both_lanes(margining))
 | |
| 			margining->lanes = 7;
 | |
| 		else
 | |
| 			ret = -EINVAL;
 | |
| 	} else {
 | |
| 		ret = -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 
 | |
| out_free:
 | |
| 	free_page((unsigned long)buf);
 | |
| 	return ret < 0 ? ret : count;
 | |
| }
 | |
| 
 | |
| static int margining_lanes_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	unsigned int lanes;
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	lanes = margining->lanes;
 | |
| 	if (both_lanes(margining)) {
 | |
| 		if (!lanes)
 | |
| 			seq_puts(s, "[0] 1 all\n");
 | |
| 		else if (lanes == 1)
 | |
| 			seq_puts(s, "0 [1] all\n");
 | |
| 		else
 | |
| 			seq_puts(s, "0 1 [all]\n");
 | |
| 	} else {
 | |
| 		if (!lanes)
 | |
| 			seq_puts(s, "[0] 1\n");
 | |
| 		else
 | |
| 			seq_puts(s, "0 [1]\n");
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 	return 0;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(margining_lanes);
 | |
| 
 | |
| static ssize_t
 | |
| margining_voltage_time_offset_write(struct file *file,
 | |
| 				    const char __user *user_buf,
 | |
| 				    size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	unsigned int max_margin;
 | |
| 	unsigned int val;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = kstrtouint_from_user(user_buf, count, 10, &val);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) {
 | |
| 		if (!margining->software)
 | |
| 			return -EOPNOTSUPP;
 | |
| 
 | |
| 		if (margining->time)
 | |
| 			max_margin = margining->time_steps;
 | |
| 		else
 | |
| 			if (margining->optional_voltage_offset_range)
 | |
| 				max_margin = margining->voltage_steps_optional_range;
 | |
| 			else
 | |
| 				max_margin = margining->voltage_steps;
 | |
| 
 | |
| 		margining->voltage_time_offset = clamp(val, 0, max_margin);
 | |
| 	}
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static int margining_voltage_time_offset_show(struct seq_file *s,
 | |
| 					      void *not_used)
 | |
| {
 | |
| 	const struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 
 | |
| 	scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) {
 | |
| 		if (!margining->software)
 | |
| 			return -EOPNOTSUPP;
 | |
| 
 | |
| 		seq_printf(s, "%d\n", margining->voltage_time_offset);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(margining_voltage_time_offset);
 | |
| 
 | |
| static ssize_t
 | |
| margining_error_counter_write(struct file *file, const char __user *user_buf,
 | |
| 			      size_t count, loff_t *ppos)
 | |
| {
 | |
| 	enum usb4_margin_sw_error_counter error_counter;
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	char *buf;
 | |
| 
 | |
| 	buf = validate_and_copy_from_user(user_buf, &count);
 | |
| 	if (IS_ERR(buf))
 | |
| 		return PTR_ERR(buf);
 | |
| 
 | |
| 	buf[count - 1] = '\0';
 | |
| 
 | |
| 	if (!strcmp(buf, "nop"))
 | |
| 		error_counter = USB4_MARGIN_SW_ERROR_COUNTER_NOP;
 | |
| 	else if (!strcmp(buf, "clear"))
 | |
| 		error_counter = USB4_MARGIN_SW_ERROR_COUNTER_CLEAR;
 | |
| 	else if (!strcmp(buf, "start"))
 | |
| 		error_counter = USB4_MARGIN_SW_ERROR_COUNTER_START;
 | |
| 	else if (!strcmp(buf, "stop"))
 | |
| 		error_counter = USB4_MARGIN_SW_ERROR_COUNTER_STOP;
 | |
| 	else
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) {
 | |
| 		if (!margining->software)
 | |
| 			return -EOPNOTSUPP;
 | |
| 
 | |
| 		margining->error_counter = error_counter;
 | |
| 	}
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static int margining_error_counter_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	const struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 
 | |
| 	scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) {
 | |
| 		if (!margining->software)
 | |
| 			return -EOPNOTSUPP;
 | |
| 
 | |
| 		switch (margining->error_counter) {
 | |
| 		case USB4_MARGIN_SW_ERROR_COUNTER_NOP:
 | |
| 			seq_puts(s, "[nop] clear start stop\n");
 | |
| 			break;
 | |
| 		case USB4_MARGIN_SW_ERROR_COUNTER_CLEAR:
 | |
| 			seq_puts(s, "nop [clear] start stop\n");
 | |
| 			break;
 | |
| 		case USB4_MARGIN_SW_ERROR_COUNTER_START:
 | |
| 			seq_puts(s, "nop clear [start] stop\n");
 | |
| 			break;
 | |
| 		case USB4_MARGIN_SW_ERROR_COUNTER_STOP:
 | |
| 			seq_puts(s, "nop clear start [stop]\n");
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(margining_error_counter);
 | |
| 
 | |
| static ssize_t
 | |
| margining_dwell_time_write(struct file *file, const char __user *user_buf,
 | |
| 			   size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	unsigned int val;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = kstrtouint_from_user(user_buf, count, 10, &val);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) {
 | |
| 		if (!margining->software)
 | |
| 			return -EOPNOTSUPP;
 | |
| 
 | |
| 		margining->dwell_time = clamp(val, MIN_DWELL_TIME, MAX_DWELL_TIME);
 | |
| 	}
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static int margining_dwell_time_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 
 | |
| 	scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) {
 | |
| 		if (!margining->software)
 | |
| 			return -EOPNOTSUPP;
 | |
| 
 | |
| 		seq_printf(s, "%d\n", margining->dwell_time);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(margining_dwell_time);
 | |
| 
 | |
| static ssize_t
 | |
| margining_optional_voltage_offset_write(struct file *file, const char __user *user_buf,
 | |
| 					size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	bool val;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = kstrtobool_from_user(user_buf, count, &val);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) {
 | |
| 		margining->optional_voltage_offset_range = val;
 | |
| 	}
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static int margining_optional_voltage_offset_show(struct seq_file *s,
 | |
| 						  void *not_used)
 | |
| {
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 
 | |
| 	scoped_cond_guard(mutex_intr, return -ERESTARTSYS, &tb->lock) {
 | |
| 		seq_printf(s, "%u\n", margining->optional_voltage_offset_range);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(margining_optional_voltage_offset);
 | |
| 
 | |
| static ssize_t margining_mode_write(struct file *file,
 | |
| 				   const char __user *user_buf,
 | |
| 				   size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	int ret = 0;
 | |
| 	char *buf;
 | |
| 
 | |
| 	buf = validate_and_copy_from_user(user_buf, &count);
 | |
| 	if (IS_ERR(buf))
 | |
| 		return PTR_ERR(buf);
 | |
| 
 | |
| 	buf[count - 1] = '\0';
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out_free;
 | |
| 	}
 | |
| 
 | |
| 	if (!strcmp(buf, "software")) {
 | |
| 		if (supports_software(margining))
 | |
| 			margining->software = true;
 | |
| 		else
 | |
| 			ret = -EINVAL;
 | |
| 	} else if (!strcmp(buf, "hardware")) {
 | |
| 		if (supports_hardware(margining))
 | |
| 			margining->software = false;
 | |
| 		else
 | |
| 			ret = -EINVAL;
 | |
| 	} else {
 | |
| 		ret = -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 
 | |
| out_free:
 | |
| 	free_page((unsigned long)buf);
 | |
| 	return ret ? ret : count;
 | |
| }
 | |
| 
 | |
| static int margining_mode_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	const char *space = "";
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	if (supports_software(margining)) {
 | |
| 		if (margining->software)
 | |
| 			seq_puts(s, "[software]");
 | |
| 		else
 | |
| 			seq_puts(s, "software");
 | |
| 		space = " ";
 | |
| 	}
 | |
| 	if (supports_hardware(margining)) {
 | |
| 		if (margining->software)
 | |
| 			seq_printf(s, "%shardware", space);
 | |
| 		else
 | |
| 			seq_printf(s, "%s[hardware]", space);
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 
 | |
| 	seq_puts(s, "\n");
 | |
| 	return 0;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(margining_mode);
 | |
| 
 | |
| static int margining_run_sw(struct tb_margining *margining,
 | |
| 			    struct usb4_port_margining_params *params)
 | |
| {
 | |
| 	u32 nsamples = margining->dwell_time / DWELL_SAMPLE_INTERVAL;
 | |
| 	int ret, i;
 | |
| 
 | |
| 	ret = usb4_port_sw_margin(margining->port, margining->target, margining->index,
 | |
| 				  params, margining->results);
 | |
| 	if (ret)
 | |
| 		goto out_stop;
 | |
| 
 | |
| 	for (i = 0; i <= nsamples; i++) {
 | |
| 		u32 errors = 0;
 | |
| 
 | |
| 		ret = usb4_port_sw_margin_errors(margining->port, margining->target,
 | |
| 						 margining->index, &margining->results[1]);
 | |
| 		if (ret)
 | |
| 			break;
 | |
| 
 | |
| 		if (margining->lanes == USB4_MARGIN_SW_LANE_0)
 | |
| 			errors = FIELD_GET(USB4_MARGIN_SW_ERR_COUNTER_LANE_0_MASK,
 | |
| 					   margining->results[1]);
 | |
| 		else if (margining->lanes == USB4_MARGIN_SW_LANE_1)
 | |
| 			errors = FIELD_GET(USB4_MARGIN_SW_ERR_COUNTER_LANE_1_MASK,
 | |
| 					   margining->results[1]);
 | |
| 		else if (margining->lanes == USB4_MARGIN_SW_ALL_LANES)
 | |
| 			errors = margining->results[1];
 | |
| 
 | |
| 		/* Any errors stop the test */
 | |
| 		if (errors)
 | |
| 			break;
 | |
| 
 | |
| 		fsleep(DWELL_SAMPLE_INTERVAL * USEC_PER_MSEC);
 | |
| 	}
 | |
| 
 | |
| out_stop:
 | |
| 	/*
 | |
| 	 * Stop the counters but don't clear them to allow the
 | |
| 	 * different error counter configurations.
 | |
| 	 */
 | |
| 	margining_modify_error_counter(margining, margining->lanes,
 | |
| 				       USB4_MARGIN_SW_ERROR_COUNTER_STOP);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int margining_run_write(void *data, u64 val)
 | |
| {
 | |
| 	struct tb_margining *margining = data;
 | |
| 	struct tb_port *port = margining->port;
 | |
| 	struct device *dev = margining->dev;
 | |
| 	struct tb_switch *sw = port->sw;
 | |
| 	struct tb_switch *down_sw;
 | |
| 	struct tb *tb = sw->tb;
 | |
| 	int ret, clx;
 | |
| 
 | |
| 	if (val != 1)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	pm_runtime_get_sync(dev);
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out_rpm_put;
 | |
| 	}
 | |
| 
 | |
| 	if (tb_is_upstream_port(port))
 | |
| 		down_sw = sw;
 | |
| 	else if (port->remote)
 | |
| 		down_sw = port->remote->sw;
 | |
| 	else
 | |
| 		down_sw = NULL;
 | |
| 
 | |
| 	if (down_sw) {
 | |
| 		/*
 | |
| 		 * CL states may interfere with lane margining so
 | |
| 		 * disable them temporarily now.
 | |
| 		 */
 | |
| 		ret = tb_switch_clx_disable(down_sw);
 | |
| 		if (ret < 0) {
 | |
| 			tb_sw_warn(down_sw, "failed to disable CL states\n");
 | |
| 			goto out_unlock;
 | |
| 		}
 | |
| 		clx = ret;
 | |
| 	}
 | |
| 
 | |
| 	/* Clear the results */
 | |
| 	memset(margining->results, 0, sizeof(margining->results));
 | |
| 
 | |
| 	if (margining->software) {
 | |
| 		struct usb4_port_margining_params params = {
 | |
| 			.error_counter = USB4_MARGIN_SW_ERROR_COUNTER_CLEAR,
 | |
| 			.lanes = margining->lanes,
 | |
| 			.time = margining->time,
 | |
| 			.voltage_time_offset = margining->voltage_time_offset,
 | |
| 			.right_high = margining->right_high,
 | |
| 			.optional_voltage_offset_range = margining->optional_voltage_offset_range,
 | |
| 		};
 | |
| 
 | |
| 		tb_port_dbg(port,
 | |
| 			    "running software %s lane margining for %s lanes %u\n",
 | |
| 			    margining->time ? "time" : "voltage", dev_name(dev),
 | |
| 			    margining->lanes);
 | |
| 
 | |
| 		ret = margining_run_sw(margining, ¶ms);
 | |
| 	} else {
 | |
| 		struct usb4_port_margining_params params = {
 | |
| 			.ber_level = margining->ber_level,
 | |
| 			.lanes = margining->lanes,
 | |
| 			.time = margining->time,
 | |
| 			.right_high = margining->right_high,
 | |
| 			.optional_voltage_offset_range = margining->optional_voltage_offset_range,
 | |
| 		};
 | |
| 
 | |
| 		tb_port_dbg(port,
 | |
| 			    "running hardware %s lane margining for %s lanes %u\n",
 | |
| 			    margining->time ? "time" : "voltage", dev_name(dev),
 | |
| 			    margining->lanes);
 | |
| 
 | |
| 		ret = usb4_port_hw_margin(port, margining->target, margining->index, ¶ms,
 | |
| 					  margining->results);
 | |
| 	}
 | |
| 
 | |
| 	if (down_sw)
 | |
| 		tb_switch_clx_enable(down_sw, clx);
 | |
| out_unlock:
 | |
| 	mutex_unlock(&tb->lock);
 | |
| out_rpm_put:
 | |
| 	pm_runtime_mark_last_busy(dev);
 | |
| 	pm_runtime_put_autosuspend(dev);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| DEFINE_DEBUGFS_ATTRIBUTE(margining_run_fops, NULL, margining_run_write,
 | |
| 			 "%llu\n");
 | |
| 
 | |
| static ssize_t margining_results_write(struct file *file,
 | |
| 				       const char __user *user_buf,
 | |
| 				       size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	/* Just clear the results */
 | |
| 	margining->results[0] = 0;
 | |
| 	margining->results[1] = 0;
 | |
| 
 | |
| 	if (margining->software) {
 | |
| 		/* Clear the error counters */
 | |
| 		margining_modify_error_counter(margining,
 | |
| 					       USB4_MARGIN_SW_ALL_LANES,
 | |
| 					       USB4_MARGIN_SW_ERROR_COUNTER_CLEAR);
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static void voltage_margin_show(struct seq_file *s,
 | |
| 				const struct tb_margining *margining, u8 val)
 | |
| {
 | |
| 	unsigned int tmp, voltage;
 | |
| 
 | |
| 	tmp = FIELD_GET(USB4_MARGIN_HW_RES_1_MARGIN_MASK, val);
 | |
| 	voltage = tmp * margining->max_voltage_offset / margining->voltage_steps;
 | |
| 	seq_printf(s, "%u mV (%u)", voltage, tmp);
 | |
| 	if (val & USB4_MARGIN_HW_RES_1_EXCEEDS)
 | |
| 		seq_puts(s, " exceeds maximum");
 | |
| 	seq_puts(s, "\n");
 | |
| 	if (margining->optional_voltage_offset_range)
 | |
| 		seq_puts(s, " optional voltage offset range enabled\n");
 | |
| }
 | |
| 
 | |
| static void time_margin_show(struct seq_file *s,
 | |
| 			     const struct tb_margining *margining, u8 val)
 | |
| {
 | |
| 	unsigned int tmp, interval;
 | |
| 
 | |
| 	tmp = FIELD_GET(USB4_MARGIN_HW_RES_1_MARGIN_MASK, val);
 | |
| 	interval = tmp * margining->max_time_offset / margining->time_steps;
 | |
| 	seq_printf(s, "%u mUI (%u)", interval, tmp);
 | |
| 	if (val & USB4_MARGIN_HW_RES_1_EXCEEDS)
 | |
| 		seq_puts(s, " exceeds maximum");
 | |
| 	seq_puts(s, "\n");
 | |
| }
 | |
| 
 | |
| static int margining_results_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	/* Dump the raw results first */
 | |
| 	seq_printf(s, "0x%08x\n", margining->results[0]);
 | |
| 	/* Only the hardware margining has two result dwords */
 | |
| 	if (!margining->software) {
 | |
| 		unsigned int val;
 | |
| 
 | |
| 		seq_printf(s, "0x%08x\n", margining->results[1]);
 | |
| 
 | |
| 		if (margining->time) {
 | |
| 			if (!margining->lanes || margining->lanes == 7) {
 | |
| 				val = margining->results[1];
 | |
| 				seq_puts(s, "# lane 0 right time margin: ");
 | |
| 				time_margin_show(s, margining, val);
 | |
| 				val = margining->results[1] >>
 | |
| 					USB4_MARGIN_HW_RES_1_L0_LL_MARGIN_SHIFT;
 | |
| 				seq_puts(s, "# lane 0 left time margin: ");
 | |
| 				time_margin_show(s, margining, val);
 | |
| 			}
 | |
| 			if (margining->lanes == 1 || margining->lanes == 7) {
 | |
| 				val = margining->results[1] >>
 | |
| 					USB4_MARGIN_HW_RES_1_L1_RH_MARGIN_SHIFT;
 | |
| 				seq_puts(s, "# lane 1 right time margin: ");
 | |
| 				time_margin_show(s, margining, val);
 | |
| 				val = margining->results[1] >>
 | |
| 					USB4_MARGIN_HW_RES_1_L1_LL_MARGIN_SHIFT;
 | |
| 				seq_puts(s, "# lane 1 left time margin: ");
 | |
| 				time_margin_show(s, margining, val);
 | |
| 			}
 | |
| 		} else {
 | |
| 			if (!margining->lanes || margining->lanes == 7) {
 | |
| 				val = margining->results[1];
 | |
| 				seq_puts(s, "# lane 0 high voltage margin: ");
 | |
| 				voltage_margin_show(s, margining, val);
 | |
| 				val = margining->results[1] >>
 | |
| 					USB4_MARGIN_HW_RES_1_L0_LL_MARGIN_SHIFT;
 | |
| 				seq_puts(s, "# lane 0 low voltage margin: ");
 | |
| 				voltage_margin_show(s, margining, val);
 | |
| 			}
 | |
| 			if (margining->lanes == 1 || margining->lanes == 7) {
 | |
| 				val = margining->results[1] >>
 | |
| 					USB4_MARGIN_HW_RES_1_L1_RH_MARGIN_SHIFT;
 | |
| 				seq_puts(s, "# lane 1 high voltage margin: ");
 | |
| 				voltage_margin_show(s, margining, val);
 | |
| 				val = margining->results[1] >>
 | |
| 					USB4_MARGIN_HW_RES_1_L1_LL_MARGIN_SHIFT;
 | |
| 				seq_puts(s, "# lane 1 low voltage margin: ");
 | |
| 				voltage_margin_show(s, margining, val);
 | |
| 			}
 | |
| 		}
 | |
| 	} else {
 | |
| 		u32 lane_errors, result;
 | |
| 
 | |
| 		seq_printf(s, "0x%08x\n", margining->results[1]);
 | |
| 		result = FIELD_GET(USB4_MARGIN_SW_LANES_MASK, margining->results[0]);
 | |
| 
 | |
| 		if (result == USB4_MARGIN_SW_LANE_0 ||
 | |
| 		    result == USB4_MARGIN_SW_ALL_LANES) {
 | |
| 			lane_errors = FIELD_GET(USB4_MARGIN_SW_ERR_COUNTER_LANE_0_MASK,
 | |
| 						margining->results[1]);
 | |
| 			seq_printf(s, "# lane 0 errors: %u\n", lane_errors);
 | |
| 		}
 | |
| 		if (result == USB4_MARGIN_SW_LANE_1 ||
 | |
| 		    result == USB4_MARGIN_SW_ALL_LANES) {
 | |
| 			lane_errors = FIELD_GET(USB4_MARGIN_SW_ERR_COUNTER_LANE_1_MASK,
 | |
| 						margining->results[1]);
 | |
| 			seq_printf(s, "# lane 1 errors: %u\n", lane_errors);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 	return 0;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(margining_results);
 | |
| 
 | |
| static ssize_t margining_test_write(struct file *file,
 | |
| 				    const char __user *user_buf,
 | |
| 				    size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	int ret = 0;
 | |
| 	char *buf;
 | |
| 
 | |
| 	buf = validate_and_copy_from_user(user_buf, &count);
 | |
| 	if (IS_ERR(buf))
 | |
| 		return PTR_ERR(buf);
 | |
| 
 | |
| 	buf[count - 1] = '\0';
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out_free;
 | |
| 	}
 | |
| 
 | |
| 	if (!strcmp(buf, "time") && supports_time(margining))
 | |
| 		margining->time = true;
 | |
| 	else if (!strcmp(buf, "voltage"))
 | |
| 		margining->time = false;
 | |
| 	else
 | |
| 		ret = -EINVAL;
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 
 | |
| out_free:
 | |
| 	free_page((unsigned long)buf);
 | |
| 	return ret ? ret : count;
 | |
| }
 | |
| 
 | |
| static int margining_test_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	if (supports_time(margining)) {
 | |
| 		if (margining->time)
 | |
| 			seq_puts(s, "voltage [time]\n");
 | |
| 		else
 | |
| 			seq_puts(s, "[voltage] time\n");
 | |
| 	} else {
 | |
| 		seq_puts(s, "[voltage]\n");
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 	return 0;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(margining_test);
 | |
| 
 | |
| static ssize_t margining_margin_write(struct file *file,
 | |
| 				    const char __user *user_buf,
 | |
| 				    size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 	int ret = 0;
 | |
| 	char *buf;
 | |
| 
 | |
| 	buf = validate_and_copy_from_user(user_buf, &count);
 | |
| 	if (IS_ERR(buf))
 | |
| 		return PTR_ERR(buf);
 | |
| 
 | |
| 	buf[count - 1] = '\0';
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out_free;
 | |
| 	}
 | |
| 
 | |
| 	if (margining->time) {
 | |
| 		if (!strcmp(buf, "left"))
 | |
| 			margining->right_high = false;
 | |
| 		else if (!strcmp(buf, "right"))
 | |
| 			margining->right_high = true;
 | |
| 		else
 | |
| 			ret = -EINVAL;
 | |
| 	} else {
 | |
| 		if (!strcmp(buf, "low"))
 | |
| 			margining->right_high = false;
 | |
| 		else if (!strcmp(buf, "high"))
 | |
| 			margining->right_high = true;
 | |
| 		else
 | |
| 			ret = -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 
 | |
| out_free:
 | |
| 	free_page((unsigned long)buf);
 | |
| 	return ret ? ret : count;
 | |
| }
 | |
| 
 | |
| static int margining_margin_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_margining *margining = s->private;
 | |
| 	struct tb *tb = margining->port->sw->tb;
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock))
 | |
| 		return -ERESTARTSYS;
 | |
| 
 | |
| 	if (margining->time) {
 | |
| 		if (margining->right_high)
 | |
| 			seq_puts(s, "left [right]\n");
 | |
| 		else
 | |
| 			seq_puts(s, "[left] right\n");
 | |
| 	} else {
 | |
| 		if (margining->right_high)
 | |
| 			seq_puts(s, "low [high]\n");
 | |
| 		else
 | |
| 			seq_puts(s, "[low] high\n");
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 	return 0;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(margining_margin);
 | |
| 
 | |
| static struct tb_margining *margining_alloc(struct tb_port *port,
 | |
| 					    struct device *dev,
 | |
| 					    enum usb4_sb_target target,
 | |
| 					    u8 index, struct dentry *parent)
 | |
| {
 | |
| 	struct tb_margining *margining;
 | |
| 	struct dentry *dir;
 | |
| 	unsigned int val;
 | |
| 	int ret;
 | |
| 
 | |
| 	margining = kzalloc(sizeof(*margining), GFP_KERNEL);
 | |
| 	if (!margining)
 | |
| 		return NULL;
 | |
| 
 | |
| 	margining->port = port;
 | |
| 	margining->target = target;
 | |
| 	margining->index = index;
 | |
| 	margining->dev = dev;
 | |
| 
 | |
| 	ret = usb4_port_margining_caps(port, target, index, margining->caps);
 | |
| 	if (ret) {
 | |
| 		kfree(margining);
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	/* Set the initial mode */
 | |
| 	if (supports_software(margining))
 | |
| 		margining->software = true;
 | |
| 
 | |
| 	val = FIELD_GET(USB4_MARGIN_CAP_0_VOLTAGE_STEPS_MASK, margining->caps[0]);
 | |
| 	margining->voltage_steps = val;
 | |
| 	val = FIELD_GET(USB4_MARGIN_CAP_0_MAX_VOLTAGE_OFFSET_MASK, margining->caps[0]);
 | |
| 	margining->max_voltage_offset = 74 + val * 2;
 | |
| 
 | |
| 	if (supports_optional_voltage_offset_range(margining)) {
 | |
| 		val = FIELD_GET(USB4_MARGIN_CAP_0_VOLT_STEPS_OPT_MASK,
 | |
| 				margining->caps[0]);
 | |
| 		margining->voltage_steps_optional_range = val;
 | |
| 		val = FIELD_GET(USB4_MARGIN_CAP_1_MAX_VOLT_OFS_OPT_MASK,
 | |
| 				margining->caps[1]);
 | |
| 		margining->max_voltage_offset_optional_range = 74 + val * 2;
 | |
| 	}
 | |
| 
 | |
| 	if (supports_time(margining)) {
 | |
| 		val = FIELD_GET(USB4_MARGIN_CAP_1_TIME_STEPS_MASK, margining->caps[1]);
 | |
| 		margining->time_steps = val;
 | |
| 		val = FIELD_GET(USB4_MARGIN_CAP_1_TIME_OFFSET_MASK, margining->caps[1]);
 | |
| 		/*
 | |
| 		 * Store it as mUI (milli Unit Interval) because we want
 | |
| 		 * to keep it as integer.
 | |
| 		 */
 | |
| 		margining->max_time_offset = 200 + 10 * val;
 | |
| 	}
 | |
| 
 | |
| 	dir = debugfs_create_dir("margining", parent);
 | |
| 	if (supports_hardware(margining)) {
 | |
| 		val = FIELD_GET(USB4_MARGIN_CAP_1_MIN_BER_MASK, margining->caps[1]);
 | |
| 		margining->min_ber_level = val;
 | |
| 		val = FIELD_GET(USB4_MARGIN_CAP_1_MAX_BER_MASK, margining->caps[1]);
 | |
| 		margining->max_ber_level = val;
 | |
| 
 | |
| 		/* Set the default to minimum */
 | |
| 		margining->ber_level = margining->min_ber_level;
 | |
| 
 | |
| 		debugfs_create_file("ber_level_contour", 0400, dir, margining,
 | |
| 				    &margining_ber_level_fops);
 | |
| 	}
 | |
| 	debugfs_create_file("caps", 0400, dir, margining, &margining_caps_fops);
 | |
| 	debugfs_create_file("lanes", 0600, dir, margining, &margining_lanes_fops);
 | |
| 	debugfs_create_file("mode", 0600, dir, margining, &margining_mode_fops);
 | |
| 	debugfs_create_file("run", 0600, dir, margining, &margining_run_fops);
 | |
| 	debugfs_create_file("results", 0600, dir, margining,
 | |
| 			    &margining_results_fops);
 | |
| 	debugfs_create_file("test", 0600, dir, margining, &margining_test_fops);
 | |
| 	if (independent_voltage_margins(margining) == USB4_MARGIN_CAP_0_VOLTAGE_HL ||
 | |
| 	    (supports_time(margining) &&
 | |
| 	     independent_time_margins(margining) == USB4_MARGIN_CAP_1_TIME_LR))
 | |
| 		debugfs_create_file("margin", 0600, dir, margining,
 | |
| 				    &margining_margin_fops);
 | |
| 
 | |
| 	margining->error_counter = USB4_MARGIN_SW_ERROR_COUNTER_CLEAR;
 | |
| 	margining->dwell_time = MIN_DWELL_TIME;
 | |
| 
 | |
| 	if (supports_optional_voltage_offset_range(margining))
 | |
| 		debugfs_create_file("optional_voltage_offset", DEBUGFS_MODE, dir, margining,
 | |
| 				    &margining_optional_voltage_offset_fops);
 | |
| 
 | |
| 	if (supports_software(margining)) {
 | |
| 		debugfs_create_file("voltage_time_offset", DEBUGFS_MODE, dir, margining,
 | |
| 				    &margining_voltage_time_offset_fops);
 | |
| 		debugfs_create_file("error_counter", DEBUGFS_MODE, dir, margining,
 | |
| 				    &margining_error_counter_fops);
 | |
| 		debugfs_create_file("dwell_time", DEBUGFS_MODE, dir, margining,
 | |
| 				    &margining_dwell_time_fops);
 | |
| 	}
 | |
| 	return margining;
 | |
| }
 | |
| 
 | |
| static void margining_port_init(struct tb_port *port)
 | |
| {
 | |
| 	struct dentry *parent;
 | |
| 	char dir_name[10];
 | |
| 
 | |
| 	if (!port->usb4)
 | |
| 		return;
 | |
| 
 | |
| 	snprintf(dir_name, sizeof(dir_name), "port%d", port->port);
 | |
| 	parent = debugfs_lookup(dir_name, port->sw->debugfs_dir);
 | |
| 	port->usb4->margining = margining_alloc(port, &port->usb4->dev,
 | |
| 						USB4_SB_TARGET_ROUTER, 0,
 | |
| 						parent);
 | |
| }
 | |
| 
 | |
| static void margining_port_remove(struct tb_port *port)
 | |
| {
 | |
| 	struct dentry *parent;
 | |
| 	char dir_name[10];
 | |
| 
 | |
| 	if (!port->usb4)
 | |
| 		return;
 | |
| 
 | |
| 	snprintf(dir_name, sizeof(dir_name), "port%d", port->port);
 | |
| 	parent = debugfs_lookup(dir_name, port->sw->debugfs_dir);
 | |
| 	if (parent)
 | |
| 		debugfs_lookup_and_remove("margining", parent);
 | |
| 
 | |
| 	kfree(port->usb4->margining);
 | |
| 	port->usb4->margining = NULL;
 | |
| }
 | |
| 
 | |
| static void margining_switch_init(struct tb_switch *sw)
 | |
| {
 | |
| 	struct tb_port *upstream, *downstream;
 | |
| 	struct tb_switch *parent_sw;
 | |
| 	u64 route = tb_route(sw);
 | |
| 
 | |
| 	if (!route)
 | |
| 		return;
 | |
| 
 | |
| 	upstream = tb_upstream_port(sw);
 | |
| 	parent_sw = tb_switch_parent(sw);
 | |
| 	downstream = tb_port_at(route, parent_sw);
 | |
| 
 | |
| 	margining_port_init(downstream);
 | |
| 	margining_port_init(upstream);
 | |
| }
 | |
| 
 | |
| static void margining_switch_remove(struct tb_switch *sw)
 | |
| {
 | |
| 	struct tb_port *upstream, *downstream;
 | |
| 	struct tb_switch *parent_sw;
 | |
| 	u64 route = tb_route(sw);
 | |
| 
 | |
| 	if (!route)
 | |
| 		return;
 | |
| 
 | |
| 	upstream = tb_upstream_port(sw);
 | |
| 	parent_sw = tb_switch_parent(sw);
 | |
| 	downstream = tb_port_at(route, parent_sw);
 | |
| 
 | |
| 	margining_port_remove(upstream);
 | |
| 	margining_port_remove(downstream);
 | |
| }
 | |
| 
 | |
| static void margining_xdomain_init(struct tb_xdomain *xd)
 | |
| {
 | |
| 	struct tb_switch *parent_sw;
 | |
| 	struct tb_port *downstream;
 | |
| 
 | |
| 	parent_sw = tb_xdomain_parent(xd);
 | |
| 	downstream = tb_port_at(xd->route, parent_sw);
 | |
| 
 | |
| 	margining_port_init(downstream);
 | |
| }
 | |
| 
 | |
| static void margining_xdomain_remove(struct tb_xdomain *xd)
 | |
| {
 | |
| 	struct tb_switch *parent_sw;
 | |
| 	struct tb_port *downstream;
 | |
| 
 | |
| 	parent_sw = tb_xdomain_parent(xd);
 | |
| 	downstream = tb_port_at(xd->route, parent_sw);
 | |
| 	margining_port_remove(downstream);
 | |
| }
 | |
| 
 | |
| static void margining_retimer_init(struct tb_retimer *rt, struct dentry *debugfs_dir)
 | |
| {
 | |
| 	rt->margining = margining_alloc(rt->port, &rt->dev,
 | |
| 					USB4_SB_TARGET_RETIMER, rt->index,
 | |
| 					debugfs_dir);
 | |
| }
 | |
| 
 | |
| static void margining_retimer_remove(struct tb_retimer *rt)
 | |
| {
 | |
| 	kfree(rt->margining);
 | |
| 	rt->margining = NULL;
 | |
| }
 | |
| #else
 | |
| static inline void margining_switch_init(struct tb_switch *sw) { }
 | |
| static inline void margining_switch_remove(struct tb_switch *sw) { }
 | |
| static inline void margining_xdomain_init(struct tb_xdomain *xd) { }
 | |
| static inline void margining_xdomain_remove(struct tb_xdomain *xd) { }
 | |
| static inline void margining_retimer_init(struct tb_retimer *rt,
 | |
| 					  struct dentry *debugfs_dir) { }
 | |
| static inline void margining_retimer_remove(struct tb_retimer *rt) { }
 | |
| #endif
 | |
| 
 | |
| static int port_clear_all_counters(struct tb_port *port)
 | |
| {
 | |
| 	u32 *buf;
 | |
| 	int ret;
 | |
| 
 | |
| 	buf = kcalloc(COUNTER_SET_LEN * port->config.max_counters, sizeof(u32),
 | |
| 		      GFP_KERNEL);
 | |
| 	if (!buf)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	ret = tb_port_write(port, buf, TB_CFG_COUNTERS, 0,
 | |
| 			    COUNTER_SET_LEN * port->config.max_counters);
 | |
| 	kfree(buf);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static ssize_t counters_write(struct file *file, const char __user *user_buf,
 | |
| 			      size_t count, loff_t *ppos)
 | |
| {
 | |
| 	struct seq_file *s = file->private_data;
 | |
| 	struct tb_port *port = s->private;
 | |
| 	struct tb_switch *sw = port->sw;
 | |
| 	struct tb *tb = port->sw->tb;
 | |
| 	char *buf;
 | |
| 	int ret;
 | |
| 
 | |
| 	buf = validate_and_copy_from_user(user_buf, &count);
 | |
| 	if (IS_ERR(buf))
 | |
| 		return PTR_ERR(buf);
 | |
| 
 | |
| 	pm_runtime_get_sync(&sw->dev);
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	/* If written delimiter only, clear all counters in one shot */
 | |
| 	if (buf[0] == '\n') {
 | |
| 		ret = port_clear_all_counters(port);
 | |
| 	} else  {
 | |
| 		char *line = buf;
 | |
| 		u32 val, offset;
 | |
| 
 | |
| 		ret = -EINVAL;
 | |
| 		while (parse_line(&line, &offset, &val, 1, 4)) {
 | |
| 			ret = tb_port_write(port, &val, TB_CFG_COUNTERS,
 | |
| 					    offset, 1);
 | |
| 			if (ret)
 | |
| 				break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 
 | |
| out:
 | |
| 	pm_runtime_mark_last_busy(&sw->dev);
 | |
| 	pm_runtime_put_autosuspend(&sw->dev);
 | |
| 	free_page((unsigned long)buf);
 | |
| 
 | |
| 	return ret < 0 ? ret : count;
 | |
| }
 | |
| 
 | |
| static void cap_show_by_dw(struct seq_file *s, struct tb_switch *sw,
 | |
| 			   struct tb_port *port, unsigned int cap,
 | |
| 			   unsigned int offset, u8 cap_id, u8 vsec_id,
 | |
| 			   int dwords)
 | |
| {
 | |
| 	int i, ret;
 | |
| 	u32 data;
 | |
| 
 | |
| 	for (i = 0; i < dwords; i++) {
 | |
| 		if (port)
 | |
| 			ret = tb_port_read(port, &data, TB_CFG_PORT, cap + offset + i, 1);
 | |
| 		else
 | |
| 			ret = tb_sw_read(sw, &data, TB_CFG_SWITCH, cap + offset + i, 1);
 | |
| 		if (ret) {
 | |
| 			seq_printf(s, "0x%04x <not accessible>\n", cap + offset + i);
 | |
| 			continue;
 | |
| 		}
 | |
| 
 | |
| 		seq_printf(s, "0x%04x %4d 0x%02x 0x%02x 0x%08x\n", cap + offset + i,
 | |
| 			   offset + i, cap_id, vsec_id, data);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void cap_show(struct seq_file *s, struct tb_switch *sw,
 | |
| 		     struct tb_port *port, unsigned int cap, u8 cap_id,
 | |
| 		     u8 vsec_id, int length)
 | |
| {
 | |
| 	int ret, offset = 0;
 | |
| 
 | |
| 	while (length > 0) {
 | |
| 		int i, dwords = min(length, TB_MAX_CONFIG_RW_LENGTH);
 | |
| 		u32 data[TB_MAX_CONFIG_RW_LENGTH];
 | |
| 
 | |
| 		if (port)
 | |
| 			ret = tb_port_read(port, data, TB_CFG_PORT, cap + offset,
 | |
| 					   dwords);
 | |
| 		else
 | |
| 			ret = tb_sw_read(sw, data, TB_CFG_SWITCH, cap + offset, dwords);
 | |
| 		if (ret) {
 | |
| 			cap_show_by_dw(s, sw, port, cap, offset, cap_id, vsec_id, length);
 | |
| 			return;
 | |
| 		}
 | |
| 
 | |
| 		for (i = 0; i < dwords; i++) {
 | |
| 			seq_printf(s, "0x%04x %4d 0x%02x 0x%02x 0x%08x\n",
 | |
| 				   cap + offset + i, offset + i,
 | |
| 				   cap_id, vsec_id, data[i]);
 | |
| 		}
 | |
| 
 | |
| 		length -= dwords;
 | |
| 		offset += dwords;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static void port_cap_show(struct tb_port *port, struct seq_file *s,
 | |
| 			  unsigned int cap)
 | |
| {
 | |
| 	struct tb_cap_any header;
 | |
| 	u8 vsec_id = 0;
 | |
| 	size_t length;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = tb_port_read(port, &header, TB_CFG_PORT, cap, 1);
 | |
| 	if (ret) {
 | |
| 		seq_printf(s, "0x%04x <capability read failed>\n", cap);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	switch (header.basic.cap) {
 | |
| 	case TB_PORT_CAP_PHY:
 | |
| 		length = PORT_CAP_LANE_LEN;
 | |
| 		break;
 | |
| 
 | |
| 	case TB_PORT_CAP_TIME1:
 | |
| 		if (usb4_switch_version(port->sw) < 2)
 | |
| 			length = PORT_CAP_TMU_V1_LEN;
 | |
| 		else
 | |
| 			length = PORT_CAP_TMU_V2_LEN;
 | |
| 		break;
 | |
| 
 | |
| 	case TB_PORT_CAP_POWER:
 | |
| 		length = PORT_CAP_POWER_LEN;
 | |
| 		break;
 | |
| 
 | |
| 	case TB_PORT_CAP_ADAP:
 | |
| 		if (tb_port_is_pcie_down(port) || tb_port_is_pcie_up(port)) {
 | |
| 			if (usb4_switch_version(port->sw) < 2)
 | |
| 				length = PORT_CAP_V1_PCIE_LEN;
 | |
| 			else
 | |
| 				length = PORT_CAP_V2_PCIE_LEN;
 | |
| 		} else if (tb_port_is_dpin(port)) {
 | |
| 			if (usb4_switch_version(port->sw) < 2)
 | |
| 				length = PORT_CAP_DP_V1_LEN;
 | |
| 			else
 | |
| 				length = PORT_CAP_DP_V2_LEN;
 | |
| 		} else if (tb_port_is_dpout(port)) {
 | |
| 			length = PORT_CAP_DP_V1_LEN;
 | |
| 		} else if (tb_port_is_usb3_down(port) ||
 | |
| 			   tb_port_is_usb3_up(port)) {
 | |
| 			length = PORT_CAP_USB3_LEN;
 | |
| 		} else {
 | |
| 			seq_printf(s, "0x%04x <unsupported capability 0x%02x>\n",
 | |
| 				   cap, header.basic.cap);
 | |
| 			return;
 | |
| 		}
 | |
| 		break;
 | |
| 
 | |
| 	case TB_PORT_CAP_VSE:
 | |
| 		if (!header.extended_short.length) {
 | |
| 			ret = tb_port_read(port, (u32 *)&header + 1, TB_CFG_PORT,
 | |
| 					   cap + 1, 1);
 | |
| 			if (ret) {
 | |
| 				seq_printf(s, "0x%04x <capability read failed>\n",
 | |
| 					   cap + 1);
 | |
| 				return;
 | |
| 			}
 | |
| 			length = header.extended_long.length;
 | |
| 			vsec_id = header.extended_short.vsec_id;
 | |
| 		} else {
 | |
| 			length = header.extended_short.length;
 | |
| 			vsec_id = header.extended_short.vsec_id;
 | |
| 		}
 | |
| 		break;
 | |
| 
 | |
| 	case TB_PORT_CAP_USB4:
 | |
| 		length = PORT_CAP_USB4_LEN;
 | |
| 		break;
 | |
| 
 | |
| 	default:
 | |
| 		seq_printf(s, "0x%04x <unsupported capability 0x%02x>\n",
 | |
| 			   cap, header.basic.cap);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	cap_show(s, NULL, port, cap, header.basic.cap, vsec_id, length);
 | |
| }
 | |
| 
 | |
| static void port_caps_show(struct tb_port *port, struct seq_file *s)
 | |
| {
 | |
| 	int cap;
 | |
| 
 | |
| 	cap = tb_port_next_cap(port, 0);
 | |
| 	while (cap > 0) {
 | |
| 		port_cap_show(port, s, cap);
 | |
| 		cap = tb_port_next_cap(port, cap);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int port_basic_regs_show(struct tb_port *port, struct seq_file *s)
 | |
| {
 | |
| 	u32 data[PORT_CAP_BASIC_LEN];
 | |
| 	int ret, i;
 | |
| 
 | |
| 	ret = tb_port_read(port, data, TB_CFG_PORT, 0, ARRAY_SIZE(data));
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(data); i++)
 | |
| 		seq_printf(s, "0x%04x %4d 0x00 0x00 0x%08x\n", i, i, data[i]);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int port_regs_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_port *port = s->private;
 | |
| 	struct tb_switch *sw = port->sw;
 | |
| 	struct tb *tb = sw->tb;
 | |
| 	int ret;
 | |
| 
 | |
| 	pm_runtime_get_sync(&sw->dev);
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out_rpm_put;
 | |
| 	}
 | |
| 
 | |
| 	seq_puts(s, "# offset relative_offset cap_id vs_cap_id value\n");
 | |
| 
 | |
| 	ret = port_basic_regs_show(port, s);
 | |
| 	if (ret)
 | |
| 		goto out_unlock;
 | |
| 
 | |
| 	port_caps_show(port, s);
 | |
| 
 | |
| out_unlock:
 | |
| 	mutex_unlock(&tb->lock);
 | |
| out_rpm_put:
 | |
| 	pm_runtime_mark_last_busy(&sw->dev);
 | |
| 	pm_runtime_put_autosuspend(&sw->dev);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(port_regs);
 | |
| 
 | |
| static void switch_cap_show(struct tb_switch *sw, struct seq_file *s,
 | |
| 			    unsigned int cap)
 | |
| {
 | |
| 	struct tb_cap_any header;
 | |
| 	int ret, length;
 | |
| 	u8 vsec_id = 0;
 | |
| 
 | |
| 	ret = tb_sw_read(sw, &header, TB_CFG_SWITCH, cap, 1);
 | |
| 	if (ret) {
 | |
| 		seq_printf(s, "0x%04x <capability read failed>\n", cap);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	if (header.basic.cap == TB_SWITCH_CAP_VSE) {
 | |
| 		if (!header.extended_short.length) {
 | |
| 			ret = tb_sw_read(sw, (u32 *)&header + 1, TB_CFG_SWITCH,
 | |
| 					 cap + 1, 1);
 | |
| 			if (ret) {
 | |
| 				seq_printf(s, "0x%04x <capability read failed>\n",
 | |
| 					   cap + 1);
 | |
| 				return;
 | |
| 			}
 | |
| 			length = header.extended_long.length;
 | |
| 		} else {
 | |
| 			length = header.extended_short.length;
 | |
| 		}
 | |
| 		vsec_id = header.extended_short.vsec_id;
 | |
| 	} else {
 | |
| 		if (header.basic.cap == TB_SWITCH_CAP_TMU) {
 | |
| 			length = SWITCH_CAP_TMU_LEN;
 | |
| 		} else  {
 | |
| 			seq_printf(s, "0x%04x <unknown capability 0x%02x>\n",
 | |
| 				   cap, header.basic.cap);
 | |
| 			return;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	cap_show(s, sw, NULL, cap, header.basic.cap, vsec_id, length);
 | |
| }
 | |
| 
 | |
| static void switch_caps_show(struct tb_switch *sw, struct seq_file *s)
 | |
| {
 | |
| 	int cap;
 | |
| 
 | |
| 	cap = tb_switch_next_cap(sw, 0);
 | |
| 	while (cap > 0) {
 | |
| 		switch_cap_show(sw, s, cap);
 | |
| 		cap = tb_switch_next_cap(sw, cap);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int switch_basic_regs_show(struct tb_switch *sw, struct seq_file *s)
 | |
| {
 | |
| 	u32 data[SWITCH_CAP_BASIC_LEN];
 | |
| 	size_t dwords;
 | |
| 	int ret, i;
 | |
| 
 | |
| 	/* Only USB4 has the additional registers */
 | |
| 	if (tb_switch_is_usb4(sw))
 | |
| 		dwords = ARRAY_SIZE(data);
 | |
| 	else
 | |
| 		dwords = 5;
 | |
| 
 | |
| 	ret = tb_sw_read(sw, data, TB_CFG_SWITCH, 0, dwords);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	for (i = 0; i < dwords; i++)
 | |
| 		seq_printf(s, "0x%04x %4d 0x00 0x00 0x%08x\n", i, i, data[i]);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int switch_regs_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_switch *sw = s->private;
 | |
| 	struct tb *tb = sw->tb;
 | |
| 	int ret;
 | |
| 
 | |
| 	pm_runtime_get_sync(&sw->dev);
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out_rpm_put;
 | |
| 	}
 | |
| 
 | |
| 	seq_puts(s, "# offset relative_offset cap_id vs_cap_id value\n");
 | |
| 
 | |
| 	ret = switch_basic_regs_show(sw, s);
 | |
| 	if (ret)
 | |
| 		goto out_unlock;
 | |
| 
 | |
| 	switch_caps_show(sw, s);
 | |
| 
 | |
| out_unlock:
 | |
| 	mutex_unlock(&tb->lock);
 | |
| out_rpm_put:
 | |
| 	pm_runtime_mark_last_busy(&sw->dev);
 | |
| 	pm_runtime_put_autosuspend(&sw->dev);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(switch_regs);
 | |
| 
 | |
| static int path_show_one(struct tb_port *port, struct seq_file *s, int hopid)
 | |
| {
 | |
| 	u32 data[PATH_LEN];
 | |
| 	int ret, i;
 | |
| 
 | |
| 	ret = tb_port_read(port, data, TB_CFG_HOPS, hopid * PATH_LEN,
 | |
| 			   ARRAY_SIZE(data));
 | |
| 	if (ret) {
 | |
| 		seq_printf(s, "0x%04x <not accessible>\n", hopid * PATH_LEN);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(data); i++) {
 | |
| 		seq_printf(s, "0x%04x %4d 0x%02x 0x%08x\n",
 | |
| 			   hopid * PATH_LEN + i, i, hopid, data[i]);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int path_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_port *port = s->private;
 | |
| 	struct tb_switch *sw = port->sw;
 | |
| 	struct tb *tb = sw->tb;
 | |
| 	int start, i, ret = 0;
 | |
| 
 | |
| 	pm_runtime_get_sync(&sw->dev);
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out_rpm_put;
 | |
| 	}
 | |
| 
 | |
| 	seq_puts(s, "# offset relative_offset in_hop_id value\n");
 | |
| 
 | |
| 	/* NHI and lane adapters have entry for path 0 */
 | |
| 	if (tb_port_is_null(port) || tb_port_is_nhi(port)) {
 | |
| 		ret = path_show_one(port, s, 0);
 | |
| 		if (ret)
 | |
| 			goto out_unlock;
 | |
| 	}
 | |
| 
 | |
| 	start = tb_port_is_nhi(port) ? 1 : TB_PATH_MIN_HOPID;
 | |
| 
 | |
| 	for (i = start; i <= port->config.max_in_hop_id; i++) {
 | |
| 		ret = path_show_one(port, s, i);
 | |
| 		if (ret)
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| out_unlock:
 | |
| 	mutex_unlock(&tb->lock);
 | |
| out_rpm_put:
 | |
| 	pm_runtime_mark_last_busy(&sw->dev);
 | |
| 	pm_runtime_put_autosuspend(&sw->dev);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| DEBUGFS_ATTR_RO(path);
 | |
| 
 | |
| static int counter_set_regs_show(struct tb_port *port, struct seq_file *s,
 | |
| 				 int counter)
 | |
| {
 | |
| 	u32 data[COUNTER_SET_LEN];
 | |
| 	int ret, i;
 | |
| 
 | |
| 	ret = tb_port_read(port, data, TB_CFG_COUNTERS,
 | |
| 			   counter * COUNTER_SET_LEN, ARRAY_SIZE(data));
 | |
| 	if (ret) {
 | |
| 		seq_printf(s, "0x%04x <not accessible>\n",
 | |
| 			   counter * COUNTER_SET_LEN);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(data); i++) {
 | |
| 		seq_printf(s, "0x%04x %4d 0x%02x 0x%08x\n",
 | |
| 			   counter * COUNTER_SET_LEN + i, i, counter, data[i]);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int counters_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_port *port = s->private;
 | |
| 	struct tb_switch *sw = port->sw;
 | |
| 	struct tb *tb = sw->tb;
 | |
| 	int i, ret = 0;
 | |
| 
 | |
| 	pm_runtime_get_sync(&sw->dev);
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	seq_puts(s, "# offset relative_offset counter_id value\n");
 | |
| 
 | |
| 	for (i = 0; i < port->config.max_counters; i++) {
 | |
| 		ret = counter_set_regs_show(port, s, i);
 | |
| 		if (ret)
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| 
 | |
| out:
 | |
| 	pm_runtime_mark_last_busy(&sw->dev);
 | |
| 	pm_runtime_put_autosuspend(&sw->dev);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(counters);
 | |
| 
 | |
| static int sb_regs_show(struct tb_port *port, const struct sb_reg *sb_regs,
 | |
| 			size_t size, enum usb4_sb_target target, u8 index,
 | |
| 			struct seq_file *s)
 | |
| {
 | |
| 	int ret, i;
 | |
| 
 | |
| 	seq_puts(s, "# register value\n");
 | |
| 
 | |
| 	for (i = 0; i < size; i++) {
 | |
| 		const struct sb_reg *regs = &sb_regs[i];
 | |
| 		u8 data[64];
 | |
| 		int j;
 | |
| 
 | |
| 		memset(data, 0, sizeof(data));
 | |
| 		ret = usb4_port_sb_read(port, target, index, regs->reg, data,
 | |
| 					regs->size);
 | |
| 		if (ret)
 | |
| 			return ret;
 | |
| 
 | |
| 		seq_printf(s, "0x%02x", regs->reg);
 | |
| 		for (j = 0; j < regs->size; j++)
 | |
| 			seq_printf(s, " 0x%02x", data[j]);
 | |
| 		seq_puts(s, "\n");
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int port_sb_regs_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_port *port = s->private;
 | |
| 	struct tb_switch *sw = port->sw;
 | |
| 	struct tb *tb = sw->tb;
 | |
| 	int ret;
 | |
| 
 | |
| 	pm_runtime_get_sync(&sw->dev);
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out_rpm_put;
 | |
| 	}
 | |
| 
 | |
| 	ret = sb_regs_show(port, port_sb_regs, ARRAY_SIZE(port_sb_regs),
 | |
| 			   USB4_SB_TARGET_ROUTER, 0, s);
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| out_rpm_put:
 | |
| 	pm_runtime_mark_last_busy(&sw->dev);
 | |
| 	pm_runtime_put_autosuspend(&sw->dev);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(port_sb_regs);
 | |
| 
 | |
| /**
 | |
|  * tb_switch_debugfs_init() - Add debugfs entries for router
 | |
|  * @sw: Pointer to the router
 | |
|  *
 | |
|  * Adds debugfs directories and files for given router.
 | |
|  */
 | |
| void tb_switch_debugfs_init(struct tb_switch *sw)
 | |
| {
 | |
| 	struct dentry *debugfs_dir;
 | |
| 	struct tb_port *port;
 | |
| 
 | |
| 	debugfs_dir = debugfs_create_dir(dev_name(&sw->dev), tb_debugfs_root);
 | |
| 	sw->debugfs_dir = debugfs_dir;
 | |
| 	debugfs_create_file("regs", DEBUGFS_MODE, debugfs_dir, sw,
 | |
| 			    &switch_regs_fops);
 | |
| 
 | |
| 	tb_switch_for_each_port(sw, port) {
 | |
| 		struct dentry *debugfs_dir;
 | |
| 		char dir_name[10];
 | |
| 
 | |
| 		if (port->disabled)
 | |
| 			continue;
 | |
| 		if (port->config.type == TB_TYPE_INACTIVE)
 | |
| 			continue;
 | |
| 
 | |
| 		snprintf(dir_name, sizeof(dir_name), "port%d", port->port);
 | |
| 		debugfs_dir = debugfs_create_dir(dir_name, sw->debugfs_dir);
 | |
| 		debugfs_create_file("regs", DEBUGFS_MODE, debugfs_dir,
 | |
| 				    port, &port_regs_fops);
 | |
| 		debugfs_create_file("path", 0400, debugfs_dir, port,
 | |
| 				    &path_fops);
 | |
| 		if (port->config.counters_support)
 | |
| 			debugfs_create_file("counters", 0600, debugfs_dir, port,
 | |
| 					    &counters_fops);
 | |
| 		if (port->usb4)
 | |
| 			debugfs_create_file("sb_regs", DEBUGFS_MODE, debugfs_dir,
 | |
| 					    port, &port_sb_regs_fops);
 | |
| 	}
 | |
| 
 | |
| 	margining_switch_init(sw);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * tb_switch_debugfs_remove() - Remove all router debugfs entries
 | |
|  * @sw: Pointer to the router
 | |
|  *
 | |
|  * Removes all previously added debugfs entries under this router.
 | |
|  */
 | |
| void tb_switch_debugfs_remove(struct tb_switch *sw)
 | |
| {
 | |
| 	margining_switch_remove(sw);
 | |
| 	debugfs_remove_recursive(sw->debugfs_dir);
 | |
| }
 | |
| 
 | |
| void tb_xdomain_debugfs_init(struct tb_xdomain *xd)
 | |
| {
 | |
| 	margining_xdomain_init(xd);
 | |
| }
 | |
| 
 | |
| void tb_xdomain_debugfs_remove(struct tb_xdomain *xd)
 | |
| {
 | |
| 	margining_xdomain_remove(xd);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * tb_service_debugfs_init() - Add debugfs directory for service
 | |
|  * @svc: Thunderbolt service pointer
 | |
|  *
 | |
|  * Adds debugfs directory for service.
 | |
|  */
 | |
| void tb_service_debugfs_init(struct tb_service *svc)
 | |
| {
 | |
| 	svc->debugfs_dir = debugfs_create_dir(dev_name(&svc->dev),
 | |
| 					      tb_debugfs_root);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * tb_service_debugfs_remove() - Remove service debugfs directory
 | |
|  * @svc: Thunderbolt service pointer
 | |
|  *
 | |
|  * Removes the previously created debugfs directory for @svc.
 | |
|  */
 | |
| void tb_service_debugfs_remove(struct tb_service *svc)
 | |
| {
 | |
| 	debugfs_remove_recursive(svc->debugfs_dir);
 | |
| 	svc->debugfs_dir = NULL;
 | |
| }
 | |
| 
 | |
| static int retimer_sb_regs_show(struct seq_file *s, void *not_used)
 | |
| {
 | |
| 	struct tb_retimer *rt = s->private;
 | |
| 	struct tb *tb = rt->tb;
 | |
| 	int ret;
 | |
| 
 | |
| 	pm_runtime_get_sync(&rt->dev);
 | |
| 
 | |
| 	if (mutex_lock_interruptible(&tb->lock)) {
 | |
| 		ret = -ERESTARTSYS;
 | |
| 		goto out_rpm_put;
 | |
| 	}
 | |
| 
 | |
| 	ret = sb_regs_show(rt->port, retimer_sb_regs, ARRAY_SIZE(retimer_sb_regs),
 | |
| 			   USB4_SB_TARGET_RETIMER, rt->index, s);
 | |
| 
 | |
| 	mutex_unlock(&tb->lock);
 | |
| out_rpm_put:
 | |
| 	pm_runtime_mark_last_busy(&rt->dev);
 | |
| 	pm_runtime_put_autosuspend(&rt->dev);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| DEBUGFS_ATTR_RW(retimer_sb_regs);
 | |
| 
 | |
| /**
 | |
|  * tb_retimer_debugfs_init() - Add debugfs directory for retimer
 | |
|  * @rt: Pointer to retimer structure
 | |
|  *
 | |
|  * Adds and populates retimer debugfs directory.
 | |
|  */
 | |
| void tb_retimer_debugfs_init(struct tb_retimer *rt)
 | |
| {
 | |
| 	struct dentry *debugfs_dir;
 | |
| 
 | |
| 	debugfs_dir = debugfs_create_dir(dev_name(&rt->dev), tb_debugfs_root);
 | |
| 	debugfs_create_file("sb_regs", DEBUGFS_MODE, debugfs_dir, rt,
 | |
| 			    &retimer_sb_regs_fops);
 | |
| 	margining_retimer_init(rt, debugfs_dir);
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * tb_retimer_debugfs_remove() - Remove retimer debugfs directory
 | |
|  * @rt: Pointer to retimer structure
 | |
|  *
 | |
|  * Removes the retimer debugfs directory along with its contents.
 | |
|  */
 | |
| void tb_retimer_debugfs_remove(struct tb_retimer *rt)
 | |
| {
 | |
| 	debugfs_lookup_and_remove(dev_name(&rt->dev), tb_debugfs_root);
 | |
| 	margining_retimer_remove(rt);
 | |
| }
 | |
| 
 | |
| void tb_debugfs_init(void)
 | |
| {
 | |
| 	tb_debugfs_root = debugfs_create_dir("thunderbolt", NULL);
 | |
| }
 | |
| 
 | |
| void tb_debugfs_exit(void)
 | |
| {
 | |
| 	debugfs_remove_recursive(tb_debugfs_root);
 | |
| }
 |