109 lines
		
	
	
		
			3.7 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			109 lines
		
	
	
		
			3.7 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /* SPDX-License-Identifier: GPL-2.0 */
 | |
| #ifndef _AHA1542_H_
 | |
| #define _AHA1542_H_
 | |
| 
 | |
| #include <linux/types.h>
 | |
| 
 | |
| /* I/O Port interface 4.2 */
 | |
| /* READ */
 | |
| #define STATUS(base) base
 | |
| #define STST	BIT(7)		/* Self Test in Progress */
 | |
| #define DIAGF	BIT(6)		/* Internal Diagnostic Failure */
 | |
| #define INIT	BIT(5)		/* Mailbox Initialization Required */
 | |
| #define IDLE	BIT(4)		/* SCSI Host Adapter Idle */
 | |
| #define CDF	BIT(3)		/* Command/Data Out Port Full */
 | |
| #define DF	BIT(2)		/* Data In Port Full */
 | |
| /* BIT(1) is reserved */
 | |
| #define INVDCMD	BIT(0)		/* Invalid H A Command */
 | |
| #define STATMASK (STST | DIAGF | INIT | IDLE | CDF | DF | INVDCMD)
 | |
| 
 | |
| #define INTRFLAGS(base) (STATUS(base)+2)
 | |
| #define ANYINTR	BIT(7)		/* Any Interrupt */
 | |
| #define SCRD	BIT(3)		/* SCSI Reset Detected */
 | |
| #define HACC	BIT(2)		/* HA Command Complete */
 | |
| #define MBOA	BIT(1)		/* MBO Empty */
 | |
| #define MBIF	BIT(0)		/* MBI Full */
 | |
| #define INTRMASK (ANYINTR | SCRD | HACC | MBOA | MBIF)
 | |
| 
 | |
| /* WRITE */
 | |
| #define CONTROL(base) STATUS(base)
 | |
| #define HRST	BIT(7)		/* Hard Reset */
 | |
| #define SRST	BIT(6)		/* Soft Reset */
 | |
| #define IRST	BIT(5)		/* Interrupt Reset */
 | |
| #define SCRST	BIT(4)		/* SCSI Bus Reset */
 | |
| 
 | |
| /* READ/WRITE */
 | |
| #define DATA(base) (STATUS(base)+1)
 | |
| #define CMD_NOP		0x00	/* No Operation */
 | |
| #define CMD_MBINIT	0x01	/* Mailbox Initialization */
 | |
| #define CMD_START_SCSI	0x02	/* Start SCSI Command */
 | |
| #define CMD_INQUIRY	0x04	/* Adapter Inquiry */
 | |
| #define CMD_EMBOI	0x05	/* Enable MailBox Out Interrupt */
 | |
| #define CMD_BUSON_TIME	0x07	/* Set Bus-On Time */
 | |
| #define CMD_BUSOFF_TIME	0x08	/* Set Bus-Off Time */
 | |
| #define CMD_DMASPEED	0x09	/* Set AT Bus Transfer Speed */
 | |
| #define CMD_RETDEVS	0x0a	/* Return Installed Devices */
 | |
| #define CMD_RETCONF	0x0b	/* Return Configuration Data */
 | |
| #define CMD_RETSETUP	0x0d	/* Return Setup Data */
 | |
| #define CMD_ECHO	0x1f	/* ECHO Command Data */
 | |
| 
 | |
| #define CMD_EXTBIOS     0x28    /* Return extend bios information only 1542C */
 | |
| #define CMD_MBENABLE    0x29    /* Set Mailbox Interface enable only 1542C */
 | |
| 
 | |
| /* Mailbox Definition 5.2.1 and 5.2.2 */
 | |
| struct mailbox {
 | |
| 	u8 status;	/* Command/Status */
 | |
| 	u8 ccbptr[3];	/* msb, .., lsb */
 | |
| };
 | |
| 
 | |
| /* This is used with scatter-gather */
 | |
| struct chain {
 | |
| 	u8 datalen[3];	/* Size of this part of chain */
 | |
| 	u8 dataptr[3];	/* Location of data */
 | |
| };
 | |
| 
 | |
| /* These belong in scsi.h also */
 | |
| static inline void any2scsi(u8 *p, u32 v)
 | |
| {
 | |
| 	p[0] = v >> 16;
 | |
| 	p[1] = v >> 8;
 | |
| 	p[2] = v;
 | |
| }
 | |
| 
 | |
| #define scsi2int(up) ( (((long)*(up)) << 16) + (((long)(up)[1]) << 8) + ((long)(up)[2]) )
 | |
| 
 | |
| #define xscsi2int(up) ( (((long)(up)[0]) << 24) + (((long)(up)[1]) << 16) \
 | |
| 		      + (((long)(up)[2]) <<  8) +  ((long)(up)[3]) )
 | |
| 
 | |
| #define MAX_CDB 12
 | |
| #define MAX_SENSE 14
 | |
| 
 | |
| /* Command Control Block (CCB), 5.3 */
 | |
| struct ccb {
 | |
| 	u8 op;		/* Command Control Block Operation Code: */
 | |
| 			/* 0x00: SCSI Initiator CCB, 0x01: SCSI Target CCB, */
 | |
| 			/* 0x02: SCSI Initiator CCB with Scatter/Gather, */
 | |
| 			/* 0x81: SCSI Bus Device Reset CCB */
 | |
| 	u8 idlun;	/* Address and Direction Control: */
 | |
| 			/* Bits 7-5: op=0, 2: Target ID, op=1: Initiator ID */
 | |
| 			/* Bit	4: Outbound data transfer, length is checked */
 | |
| 			/* Bit	3:  Inbound data transfer, length is checked */
 | |
| 			/* Bits 2-0: Logical Unit Number */
 | |
| 	u8 cdblen;	/* SCSI Command Length */
 | |
| 	u8 rsalen;	/* Request Sense Allocation Length/Disable Auto Sense */
 | |
| 	u8 datalen[3];	/* Data Length  (MSB, ..., LSB) */
 | |
| 	u8 dataptr[3];	/* Data Pointer (MSB, ..., LSB) */
 | |
| 	u8 linkptr[3];	/* Link Pointer (MSB, ..., LSB) */
 | |
| 	u8 commlinkid;	/* Command Linking Identifier */
 | |
| 	u8 hastat;	/* Host  Adapter Status (HASTAT) */
 | |
| 	u8 tarstat;	/* Target Device Status (TARSTAT) */
 | |
| 	u8 reserved[2];
 | |
| 	u8 cdb[MAX_CDB + MAX_SENSE];	/* SCSI Command Descriptor Block */
 | |
| 					/* followed by the Auto Sense data */
 | |
| };
 | |
| 
 | |
| #define AHA1542_REGION_SIZE 4
 | |
| #define AHA1542_MAILBOXES 8
 | |
| 
 | |
| #endif /* _AHA1542_H_ */
 |