426 lines
		
	
	
		
			9.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			426 lines
		
	
	
		
			9.5 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /* bbc_i2c.c: I2C low-level driver for BBC device on UltraSPARC-III
 | |
|  *            platforms.
 | |
|  *
 | |
|  * Copyright (C) 2001, 2008 David S. Miller (davem@davemloft.net)
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/types.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/sched.h>
 | |
| #include <linux/wait.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/of_device.h>
 | |
| #include <asm/bbc.h>
 | |
| #include <asm/io.h>
 | |
| 
 | |
| #include "bbc_i2c.h"
 | |
| 
 | |
| /* Convert this driver to use i2c bus layer someday... */
 | |
| #define I2C_PCF_PIN	0x80
 | |
| #define I2C_PCF_ESO	0x40
 | |
| #define I2C_PCF_ES1	0x20
 | |
| #define I2C_PCF_ES2	0x10
 | |
| #define I2C_PCF_ENI	0x08
 | |
| #define I2C_PCF_STA	0x04
 | |
| #define I2C_PCF_STO	0x02
 | |
| #define I2C_PCF_ACK	0x01
 | |
| 
 | |
| #define I2C_PCF_START    (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_ENI | I2C_PCF_STA | I2C_PCF_ACK)
 | |
| #define I2C_PCF_STOP     (I2C_PCF_PIN | I2C_PCF_ESO | I2C_PCF_STO | I2C_PCF_ACK)
 | |
| #define I2C_PCF_REPSTART (              I2C_PCF_ESO | I2C_PCF_STA | I2C_PCF_ACK)
 | |
| #define I2C_PCF_IDLE     (I2C_PCF_PIN | I2C_PCF_ESO               | I2C_PCF_ACK)
 | |
| 
 | |
| #define I2C_PCF_INI 0x40   /* 1 if not initialized */
 | |
| #define I2C_PCF_STS 0x20
 | |
| #define I2C_PCF_BER 0x10
 | |
| #define I2C_PCF_AD0 0x08
 | |
| #define I2C_PCF_LRB 0x08
 | |
| #define I2C_PCF_AAS 0x04
 | |
| #define I2C_PCF_LAB 0x02
 | |
| #define I2C_PCF_BB  0x01
 | |
| 
 | |
| /* The BBC devices have two I2C controllers.  The first I2C controller
 | |
|  * connects mainly to configuration proms (NVRAM, cpu configuration,
 | |
|  * dimm types, etc.).  Whereas the second I2C controller connects to
 | |
|  * environmental control devices such as fans and temperature sensors.
 | |
|  * The second controller also connects to the smartcard reader, if present.
 | |
|  */
 | |
| 
 | |
| static void set_device_claimage(struct bbc_i2c_bus *bp, struct platform_device *op, int val)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < NUM_CHILDREN; i++) {
 | |
| 		if (bp->devs[i].device == op) {
 | |
| 			bp->devs[i].client_claimed = val;
 | |
| 			return;
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| #define claim_device(BP,ECHILD)		set_device_claimage(BP,ECHILD,1)
 | |
| #define release_device(BP,ECHILD)	set_device_claimage(BP,ECHILD,0)
 | |
| 
 | |
| struct platform_device *bbc_i2c_getdev(struct bbc_i2c_bus *bp, int index)
 | |
| {
 | |
| 	struct platform_device *op = NULL;
 | |
| 	int curidx = 0, i;
 | |
| 
 | |
| 	for (i = 0; i < NUM_CHILDREN; i++) {
 | |
| 		if (!(op = bp->devs[i].device))
 | |
| 			break;
 | |
| 		if (curidx == index)
 | |
| 			goto out;
 | |
| 		op = NULL;
 | |
| 		curidx++;
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	if (curidx == index)
 | |
| 		return op;
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct platform_device *op)
 | |
| {
 | |
| 	struct bbc_i2c_client *client;
 | |
| 	const u32 *reg;
 | |
| 
 | |
| 	client = kzalloc(sizeof(*client), GFP_KERNEL);
 | |
| 	if (!client)
 | |
| 		return NULL;
 | |
| 	client->bp = bp;
 | |
| 	client->op = op;
 | |
| 
 | |
| 	reg = of_get_property(op->dev.of_node, "reg", NULL);
 | |
| 	if (!reg) {
 | |
| 		kfree(client);
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	client->bus = reg[0];
 | |
| 	client->address = reg[1];
 | |
| 
 | |
| 	claim_device(bp, op);
 | |
| 
 | |
| 	return client;
 | |
| }
 | |
| 
 | |
| void bbc_i2c_detach(struct bbc_i2c_client *client)
 | |
| {
 | |
| 	struct bbc_i2c_bus *bp = client->bp;
 | |
| 	struct platform_device *op = client->op;
 | |
| 
 | |
| 	release_device(bp, op);
 | |
| 	kfree(client);
 | |
| }
 | |
| 
 | |
| static int wait_for_pin(struct bbc_i2c_bus *bp, u8 *status)
 | |
| {
 | |
| 	DECLARE_WAITQUEUE(wait, current);
 | |
| 	int limit = 32;
 | |
| 	int ret = 1;
 | |
| 
 | |
| 	bp->waiting = 1;
 | |
| 	add_wait_queue(&bp->wq, &wait);
 | |
| 	while (limit-- > 0) {
 | |
| 		long val;
 | |
| 
 | |
| 		val = wait_event_interruptible_timeout(
 | |
| 				bp->wq,
 | |
| 				(((*status = readb(bp->i2c_control_regs + 0))
 | |
| 				  & I2C_PCF_PIN) == 0),
 | |
| 				msecs_to_jiffies(250));
 | |
| 		if (val > 0) {
 | |
| 			ret = 0;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 	remove_wait_queue(&bp->wq, &wait);
 | |
| 	bp->waiting = 0;
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| int bbc_i2c_writeb(struct bbc_i2c_client *client, unsigned char val, int off)
 | |
| {
 | |
| 	struct bbc_i2c_bus *bp = client->bp;
 | |
| 	int address = client->address;
 | |
| 	u8 status;
 | |
| 	int ret = -1;
 | |
| 
 | |
| 	if (bp->i2c_bussel_reg != NULL)
 | |
| 		writeb(client->bus, bp->i2c_bussel_reg);
 | |
| 
 | |
| 	writeb(address, bp->i2c_control_regs + 0x1);
 | |
| 	writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0);
 | |
| 	if (wait_for_pin(bp, &status))
 | |
| 		goto out;
 | |
| 
 | |
| 	writeb(off, bp->i2c_control_regs + 0x1);
 | |
| 	if (wait_for_pin(bp, &status) ||
 | |
| 	    (status & I2C_PCF_LRB) != 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	writeb(val, bp->i2c_control_regs + 0x1);
 | |
| 	if (wait_for_pin(bp, &status))
 | |
| 		goto out;
 | |
| 
 | |
| 	ret = 0;
 | |
| 
 | |
| out:
 | |
| 	writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| int bbc_i2c_readb(struct bbc_i2c_client *client, unsigned char *byte, int off)
 | |
| {
 | |
| 	struct bbc_i2c_bus *bp = client->bp;
 | |
| 	unsigned char address = client->address, status;
 | |
| 	int ret = -1;
 | |
| 
 | |
| 	if (bp->i2c_bussel_reg != NULL)
 | |
| 		writeb(client->bus, bp->i2c_bussel_reg);
 | |
| 
 | |
| 	writeb(address, bp->i2c_control_regs + 0x1);
 | |
| 	writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0);
 | |
| 	if (wait_for_pin(bp, &status))
 | |
| 		goto out;
 | |
| 
 | |
| 	writeb(off, bp->i2c_control_regs + 0x1);
 | |
| 	if (wait_for_pin(bp, &status) ||
 | |
| 	    (status & I2C_PCF_LRB) != 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0);
 | |
| 
 | |
| 	address |= 0x1; /* READ */
 | |
| 
 | |
| 	writeb(address, bp->i2c_control_regs + 0x1);
 | |
| 	writeb(I2C_PCF_START, bp->i2c_control_regs + 0x0);
 | |
| 	if (wait_for_pin(bp, &status))
 | |
| 		goto out;
 | |
| 
 | |
| 	/* Set PIN back to one so the device sends the first
 | |
| 	 * byte.
 | |
| 	 */
 | |
| 	(void) readb(bp->i2c_control_regs + 0x1);
 | |
| 	if (wait_for_pin(bp, &status))
 | |
| 		goto out;
 | |
| 
 | |
| 	writeb(I2C_PCF_ESO | I2C_PCF_ENI, bp->i2c_control_regs + 0x0);
 | |
| 	*byte = readb(bp->i2c_control_regs + 0x1);
 | |
| 	if (wait_for_pin(bp, &status))
 | |
| 		goto out;
 | |
| 
 | |
| 	ret = 0;
 | |
| 
 | |
| out:
 | |
| 	writeb(I2C_PCF_STOP, bp->i2c_control_regs + 0x0);
 | |
| 	(void) readb(bp->i2c_control_regs + 0x1);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| int bbc_i2c_write_buf(struct bbc_i2c_client *client,
 | |
| 		      char *buf, int len, int off)
 | |
| {
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	while (len > 0) {
 | |
| 		ret = bbc_i2c_writeb(client, *buf, off);
 | |
| 		if (ret < 0)
 | |
| 			break;
 | |
| 		len--;
 | |
| 		buf++;
 | |
| 		off++;
 | |
| 	}
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| int bbc_i2c_read_buf(struct bbc_i2c_client *client,
 | |
| 		     char *buf, int len, int off)
 | |
| {
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	while (len > 0) {
 | |
| 		ret = bbc_i2c_readb(client, buf, off);
 | |
| 		if (ret < 0)
 | |
| 			break;
 | |
| 		len--;
 | |
| 		buf++;
 | |
| 		off++;
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| EXPORT_SYMBOL(bbc_i2c_getdev);
 | |
| EXPORT_SYMBOL(bbc_i2c_attach);
 | |
| EXPORT_SYMBOL(bbc_i2c_detach);
 | |
| EXPORT_SYMBOL(bbc_i2c_writeb);
 | |
| EXPORT_SYMBOL(bbc_i2c_readb);
 | |
| EXPORT_SYMBOL(bbc_i2c_write_buf);
 | |
| EXPORT_SYMBOL(bbc_i2c_read_buf);
 | |
| 
 | |
| static irqreturn_t bbc_i2c_interrupt(int irq, void *dev_id)
 | |
| {
 | |
| 	struct bbc_i2c_bus *bp = dev_id;
 | |
| 
 | |
| 	/* PIN going from set to clear is the only event which
 | |
| 	 * makes the i2c assert an interrupt.
 | |
| 	 */
 | |
| 	if (bp->waiting &&
 | |
| 	    !(readb(bp->i2c_control_regs + 0x0) & I2C_PCF_PIN))
 | |
| 		wake_up_interruptible(&bp->wq);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static void reset_one_i2c(struct bbc_i2c_bus *bp)
 | |
| {
 | |
| 	writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0);
 | |
| 	writeb(bp->own, bp->i2c_control_regs + 0x1);
 | |
| 	writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0);
 | |
| 	writeb(bp->clock, bp->i2c_control_regs + 0x1);
 | |
| 	writeb(I2C_PCF_IDLE, bp->i2c_control_regs + 0x0);
 | |
| }
 | |
| 
 | |
| static struct bbc_i2c_bus * attach_one_i2c(struct platform_device *op, int index)
 | |
| {
 | |
| 	struct bbc_i2c_bus *bp;
 | |
| 	struct device_node *dp;
 | |
| 	int entry;
 | |
| 
 | |
| 	bp = kzalloc(sizeof(*bp), GFP_KERNEL);
 | |
| 	if (!bp)
 | |
| 		return NULL;
 | |
| 
 | |
| 	INIT_LIST_HEAD(&bp->temps);
 | |
| 	INIT_LIST_HEAD(&bp->fans);
 | |
| 
 | |
| 	bp->i2c_control_regs = of_ioremap(&op->resource[0], 0, 0x2, "bbc_i2c_regs");
 | |
| 	if (!bp->i2c_control_regs)
 | |
| 		goto fail;
 | |
| 
 | |
| 	if (op->num_resources == 2) {
 | |
| 		bp->i2c_bussel_reg = of_ioremap(&op->resource[1], 0, 0x1, "bbc_i2c_bussel");
 | |
| 		if (!bp->i2c_bussel_reg)
 | |
| 			goto fail;
 | |
| 	}
 | |
| 
 | |
| 	bp->waiting = 0;
 | |
| 	init_waitqueue_head(&bp->wq);
 | |
| 	if (request_irq(op->archdata.irqs[0], bbc_i2c_interrupt,
 | |
| 			IRQF_SHARED, "bbc_i2c", bp))
 | |
| 		goto fail;
 | |
| 
 | |
| 	bp->index = index;
 | |
| 	bp->op = op;
 | |
| 
 | |
| 	spin_lock_init(&bp->lock);
 | |
| 
 | |
| 	entry = 0;
 | |
| 	for (dp = op->dev.of_node->child;
 | |
| 	     dp && entry < 8;
 | |
| 	     dp = dp->sibling, entry++) {
 | |
| 		struct platform_device *child_op;
 | |
| 
 | |
| 		child_op = of_find_device_by_node(dp);
 | |
| 		bp->devs[entry].device = child_op;
 | |
| 		bp->devs[entry].client_claimed = 0;
 | |
| 	}
 | |
| 
 | |
| 	writeb(I2C_PCF_PIN, bp->i2c_control_regs + 0x0);
 | |
| 	bp->own = readb(bp->i2c_control_regs + 0x01);
 | |
| 	writeb(I2C_PCF_PIN | I2C_PCF_ES1, bp->i2c_control_regs + 0x0);
 | |
| 	bp->clock = readb(bp->i2c_control_regs + 0x01);
 | |
| 
 | |
| 	printk(KERN_INFO "i2c-%d: Regs at %p, %d devices, own %02x, clock %02x.\n",
 | |
| 	       bp->index, bp->i2c_control_regs, entry, bp->own, bp->clock);
 | |
| 
 | |
| 	reset_one_i2c(bp);
 | |
| 
 | |
| 	return bp;
 | |
| 
 | |
| fail:
 | |
| 	if (bp->i2c_bussel_reg)
 | |
| 		of_iounmap(&op->resource[1], bp->i2c_bussel_reg, 1);
 | |
| 	if (bp->i2c_control_regs)
 | |
| 		of_iounmap(&op->resource[0], bp->i2c_control_regs, 2);
 | |
| 	kfree(bp);
 | |
| 	return NULL;
 | |
| }
 | |
| 
 | |
| extern int bbc_envctrl_init(struct bbc_i2c_bus *bp);
 | |
| extern void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp);
 | |
| 
 | |
| static int bbc_i2c_probe(struct platform_device *op)
 | |
| {
 | |
| 	struct bbc_i2c_bus *bp;
 | |
| 	int err, index = 0;
 | |
| 
 | |
| 	bp = attach_one_i2c(op, index);
 | |
| 	if (!bp)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	err = bbc_envctrl_init(bp);
 | |
| 	if (err) {
 | |
| 		free_irq(op->archdata.irqs[0], bp);
 | |
| 		if (bp->i2c_bussel_reg)
 | |
| 			of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
 | |
| 		if (bp->i2c_control_regs)
 | |
| 			of_iounmap(&op->resource[1], bp->i2c_control_regs, 2);
 | |
| 		kfree(bp);
 | |
| 	} else {
 | |
| 		dev_set_drvdata(&op->dev, bp);
 | |
| 	}
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int bbc_i2c_remove(struct platform_device *op)
 | |
| {
 | |
| 	struct bbc_i2c_bus *bp = dev_get_drvdata(&op->dev);
 | |
| 
 | |
| 	bbc_envctrl_cleanup(bp);
 | |
| 
 | |
| 	free_irq(op->archdata.irqs[0], bp);
 | |
| 
 | |
| 	if (bp->i2c_bussel_reg)
 | |
| 		of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
 | |
| 	if (bp->i2c_control_regs)
 | |
| 		of_iounmap(&op->resource[1], bp->i2c_control_regs, 2);
 | |
| 
 | |
| 	kfree(bp);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct of_device_id bbc_i2c_match[] = {
 | |
| 	{
 | |
| 		.name = "i2c",
 | |
| 		.compatible = "SUNW,bbc-i2c",
 | |
| 	},
 | |
| 	{},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, bbc_i2c_match);
 | |
| 
 | |
| static struct platform_driver bbc_i2c_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "bbc_i2c",
 | |
| 		.of_match_table = bbc_i2c_match,
 | |
| 	},
 | |
| 	.probe		= bbc_i2c_probe,
 | |
| 	.remove		= bbc_i2c_remove,
 | |
| };
 | |
| 
 | |
| module_platform_driver(bbc_i2c_driver);
 | |
| 
 | |
| MODULE_LICENSE("GPL");
 |