587 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			587 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * RTC client/driver for the Maxim/Dallas DS1374 Real-Time Clock over I2C
 | |
|  *
 | |
|  * Based on code by Randy Vinson <rvinson@mvista.com>,
 | |
|  * which was based on the m41t00.c by Mark Greer <mgreer@mvista.com>.
 | |
|  *
 | |
|  * Copyright (C) 2014 Rose Technology
 | |
|  * Copyright (C) 2006-2007 Freescale Semiconductor
 | |
|  * Copyright (c) 2005 MontaVista Software, Inc.
 | |
|  */
 | |
| /*
 | |
|  * It would be more efficient to use i2c msgs/i2c_transfer directly but, as
 | |
|  * recommended in .../Documentation/i2c/writing-clients.rst section
 | |
|  * "Sending and receiving", using SMBus level communication is preferred.
 | |
|  */
 | |
| 
 | |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
 | |
| 
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/rtc.h>
 | |
| #include <linux/bcd.h>
 | |
| #include <linux/workqueue.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/pm.h>
 | |
| #ifdef CONFIG_RTC_DRV_DS1374_WDT
 | |
| #include <linux/fs.h>
 | |
| #include <linux/ioctl.h>
 | |
| #include <linux/miscdevice.h>
 | |
| #include <linux/reboot.h>
 | |
| #include <linux/watchdog.h>
 | |
| #endif
 | |
| 
 | |
| #define DS1374_REG_TOD0		0x00 /* Time of Day */
 | |
| #define DS1374_REG_TOD1		0x01
 | |
| #define DS1374_REG_TOD2		0x02
 | |
| #define DS1374_REG_TOD3		0x03
 | |
| #define DS1374_REG_WDALM0	0x04 /* Watchdog/Alarm */
 | |
| #define DS1374_REG_WDALM1	0x05
 | |
| #define DS1374_REG_WDALM2	0x06
 | |
| #define DS1374_REG_CR		0x07 /* Control */
 | |
| #define DS1374_REG_CR_AIE	0x01 /* Alarm Int. Enable */
 | |
| #define DS1374_REG_CR_WDSTR	0x08 /* 1=INT, 0=RST */
 | |
| #define DS1374_REG_CR_WDALM	0x20 /* 1=Watchdog, 0=Alarm */
 | |
| #define DS1374_REG_CR_WACE	0x40 /* WD/Alarm counter enable */
 | |
| #define DS1374_REG_SR		0x08 /* Status */
 | |
| #define DS1374_REG_SR_OSF	0x80 /* Oscillator Stop Flag */
 | |
| #define DS1374_REG_SR_AF	0x01 /* Alarm Flag */
 | |
| #define DS1374_REG_TCR		0x09 /* Trickle Charge */
 | |
| 
 | |
| static const struct i2c_device_id ds1374_id[] = {
 | |
| 	{ "ds1374", 0 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, ds1374_id);
 | |
| 
 | |
| #ifdef CONFIG_OF
 | |
| static const struct of_device_id ds1374_of_match[] = {
 | |
| 	{ .compatible = "dallas,ds1374" },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, ds1374_of_match);
 | |
| #endif
 | |
| 
 | |
| struct ds1374 {
 | |
| 	struct i2c_client *client;
 | |
| 	struct rtc_device *rtc;
 | |
| 	struct work_struct work;
 | |
| #ifdef CONFIG_RTC_DRV_DS1374_WDT
 | |
| 	struct watchdog_device wdt;
 | |
| #endif
 | |
| 	/* The mutex protects alarm operations, and prevents a race
 | |
| 	 * between the enable_irq() in the workqueue and the free_irq()
 | |
| 	 * in the remove function.
 | |
| 	 */
 | |
| 	struct mutex mutex;
 | |
| 	int exiting;
 | |
| };
 | |
| 
 | |
| static struct i2c_driver ds1374_driver;
 | |
| 
 | |
| static int ds1374_read_rtc(struct i2c_client *client, u32 *time,
 | |
| 			   int reg, int nbytes)
 | |
| {
 | |
| 	u8 buf[4];
 | |
| 	int ret;
 | |
| 	int i;
 | |
| 
 | |
| 	if (WARN_ON(nbytes > 4))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ret = i2c_smbus_read_i2c_block_data(client, reg, nbytes, buf);
 | |
| 
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 	if (ret < nbytes)
 | |
| 		return -EIO;
 | |
| 
 | |
| 	for (i = nbytes - 1, *time = 0; i >= 0; i--)
 | |
| 		*time = (*time << 8) | buf[i];
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ds1374_write_rtc(struct i2c_client *client, u32 time,
 | |
| 			    int reg, int nbytes)
 | |
| {
 | |
| 	u8 buf[4];
 | |
| 	int i;
 | |
| 
 | |
| 	if (nbytes > 4) {
 | |
| 		WARN_ON(1);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < nbytes; i++) {
 | |
| 		buf[i] = time & 0xff;
 | |
| 		time >>= 8;
 | |
| 	}
 | |
| 
 | |
| 	return i2c_smbus_write_i2c_block_data(client, reg, nbytes, buf);
 | |
| }
 | |
| 
 | |
| static int ds1374_check_rtc_status(struct i2c_client *client)
 | |
| {
 | |
| 	int ret = 0;
 | |
| 	int control, stat;
 | |
| 
 | |
| 	stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
 | |
| 	if (stat < 0)
 | |
| 		return stat;
 | |
| 
 | |
| 	if (stat & DS1374_REG_SR_OSF)
 | |
| 		dev_warn(&client->dev,
 | |
| 			 "oscillator discontinuity flagged, time unreliable\n");
 | |
| 
 | |
| 	stat &= ~(DS1374_REG_SR_OSF | DS1374_REG_SR_AF);
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* If the alarm is pending, clear it before requesting
 | |
| 	 * the interrupt, so an interrupt event isn't reported
 | |
| 	 * before everything is initialized.
 | |
| 	 */
 | |
| 
 | |
| 	control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
 | |
| 	if (control < 0)
 | |
| 		return control;
 | |
| 
 | |
| 	control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
 | |
| 	return i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
 | |
| }
 | |
| 
 | |
| static int ds1374_read_time(struct device *dev, struct rtc_time *time)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	u32 itime;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = ds1374_read_rtc(client, &itime, DS1374_REG_TOD0, 4);
 | |
| 	if (!ret)
 | |
| 		rtc_time64_to_tm(itime, time);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int ds1374_set_time(struct device *dev, struct rtc_time *time)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	unsigned long itime = rtc_tm_to_time64(time);
 | |
| 
 | |
| 	return ds1374_write_rtc(client, itime, DS1374_REG_TOD0, 4);
 | |
| }
 | |
| 
 | |
| #ifndef CONFIG_RTC_DRV_DS1374_WDT
 | |
| /* The ds1374 has a decrementer for an alarm, rather than a comparator.
 | |
|  * If the time of day is changed, then the alarm will need to be
 | |
|  * reset.
 | |
|  */
 | |
| static int ds1374_read_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	struct ds1374 *ds1374 = i2c_get_clientdata(client);
 | |
| 	u32 now, cur_alarm;
 | |
| 	int cr, sr;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	if (client->irq <= 0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	mutex_lock(&ds1374->mutex);
 | |
| 
 | |
| 	cr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
 | |
| 	if (ret < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	sr = ret = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
 | |
| 	if (ret < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	ret = ds1374_read_rtc(client, &now, DS1374_REG_TOD0, 4);
 | |
| 	if (ret)
 | |
| 		goto out;
 | |
| 
 | |
| 	ret = ds1374_read_rtc(client, &cur_alarm, DS1374_REG_WDALM0, 3);
 | |
| 	if (ret)
 | |
| 		goto out;
 | |
| 
 | |
| 	rtc_time64_to_tm(now + cur_alarm, &alarm->time);
 | |
| 	alarm->enabled = !!(cr & DS1374_REG_CR_WACE);
 | |
| 	alarm->pending = !!(sr & DS1374_REG_SR_AF);
 | |
| 
 | |
| out:
 | |
| 	mutex_unlock(&ds1374->mutex);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int ds1374_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	struct ds1374 *ds1374 = i2c_get_clientdata(client);
 | |
| 	struct rtc_time now;
 | |
| 	unsigned long new_alarm, itime;
 | |
| 	int cr;
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	if (client->irq <= 0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ret = ds1374_read_time(dev, &now);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	new_alarm = rtc_tm_to_time64(&alarm->time);
 | |
| 	itime = rtc_tm_to_time64(&now);
 | |
| 
 | |
| 	/* This can happen due to races, in addition to dates that are
 | |
| 	 * truly in the past.  To avoid requiring the caller to check for
 | |
| 	 * races, dates in the past are assumed to be in the recent past
 | |
| 	 * (i.e. not something that we'd rather the caller know about via
 | |
| 	 * an error), and the alarm is set to go off as soon as possible.
 | |
| 	 */
 | |
| 	if (time_before_eq(new_alarm, itime))
 | |
| 		new_alarm = 1;
 | |
| 	else
 | |
| 		new_alarm -= itime;
 | |
| 
 | |
| 	mutex_lock(&ds1374->mutex);
 | |
| 
 | |
| 	ret = cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
 | |
| 	if (ret < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	/* Disable any existing alarm before setting the new one
 | |
| 	 * (or lack thereof). */
 | |
| 	cr &= ~DS1374_REG_CR_WACE;
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
 | |
| 	if (ret < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	ret = ds1374_write_rtc(client, new_alarm, DS1374_REG_WDALM0, 3);
 | |
| 	if (ret)
 | |
| 		goto out;
 | |
| 
 | |
| 	if (alarm->enabled) {
 | |
| 		cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
 | |
| 		cr &= ~DS1374_REG_CR_WDALM;
 | |
| 
 | |
| 		ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	mutex_unlock(&ds1374->mutex);
 | |
| 	return ret;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static irqreturn_t ds1374_irq(int irq, void *dev_id)
 | |
| {
 | |
| 	struct i2c_client *client = dev_id;
 | |
| 	struct ds1374 *ds1374 = i2c_get_clientdata(client);
 | |
| 
 | |
| 	disable_irq_nosync(irq);
 | |
| 	schedule_work(&ds1374->work);
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static void ds1374_work(struct work_struct *work)
 | |
| {
 | |
| 	struct ds1374 *ds1374 = container_of(work, struct ds1374, work);
 | |
| 	struct i2c_client *client = ds1374->client;
 | |
| 	int stat, control;
 | |
| 
 | |
| 	mutex_lock(&ds1374->mutex);
 | |
| 
 | |
| 	stat = i2c_smbus_read_byte_data(client, DS1374_REG_SR);
 | |
| 	if (stat < 0)
 | |
| 		goto unlock;
 | |
| 
 | |
| 	if (stat & DS1374_REG_SR_AF) {
 | |
| 		stat &= ~DS1374_REG_SR_AF;
 | |
| 		i2c_smbus_write_byte_data(client, DS1374_REG_SR, stat);
 | |
| 
 | |
| 		control = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
 | |
| 		if (control < 0)
 | |
| 			goto out;
 | |
| 
 | |
| 		control &= ~(DS1374_REG_CR_WACE | DS1374_REG_CR_AIE);
 | |
| 		i2c_smbus_write_byte_data(client, DS1374_REG_CR, control);
 | |
| 
 | |
| 		rtc_update_irq(ds1374->rtc, 1, RTC_AF | RTC_IRQF);
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	if (!ds1374->exiting)
 | |
| 		enable_irq(client->irq);
 | |
| unlock:
 | |
| 	mutex_unlock(&ds1374->mutex);
 | |
| }
 | |
| 
 | |
| #ifndef CONFIG_RTC_DRV_DS1374_WDT
 | |
| static int ds1374_alarm_irq_enable(struct device *dev, unsigned int enabled)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 	struct ds1374 *ds1374 = i2c_get_clientdata(client);
 | |
| 	int ret;
 | |
| 
 | |
| 	mutex_lock(&ds1374->mutex);
 | |
| 
 | |
| 	ret = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
 | |
| 	if (ret < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	if (enabled) {
 | |
| 		ret |= DS1374_REG_CR_WACE | DS1374_REG_CR_AIE;
 | |
| 		ret &= ~DS1374_REG_CR_WDALM;
 | |
| 	} else {
 | |
| 		ret &= ~DS1374_REG_CR_WACE;
 | |
| 	}
 | |
| 	ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, ret);
 | |
| 
 | |
| out:
 | |
| 	mutex_unlock(&ds1374->mutex);
 | |
| 	return ret;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static const struct rtc_class_ops ds1374_rtc_ops = {
 | |
| 	.read_time = ds1374_read_time,
 | |
| 	.set_time = ds1374_set_time,
 | |
| #ifndef CONFIG_RTC_DRV_DS1374_WDT
 | |
| 	.read_alarm = ds1374_read_alarm,
 | |
| 	.set_alarm = ds1374_set_alarm,
 | |
| 	.alarm_irq_enable = ds1374_alarm_irq_enable,
 | |
| #endif
 | |
| };
 | |
| 
 | |
| #ifdef CONFIG_RTC_DRV_DS1374_WDT
 | |
| /*
 | |
|  *****************************************************************************
 | |
|  *
 | |
|  * Watchdog Driver
 | |
|  *
 | |
|  *****************************************************************************
 | |
|  */
 | |
| /* Default margin */
 | |
| #define TIMER_MARGIN_DEFAULT	32
 | |
| #define TIMER_MARGIN_MIN	1
 | |
| #define TIMER_MARGIN_MAX	4095 /* 24-bit value */
 | |
| 
 | |
| static int wdt_margin;
 | |
| module_param(wdt_margin, int, 0);
 | |
| MODULE_PARM_DESC(wdt_margin, "Watchdog timeout in seconds (default 32s)");
 | |
| 
 | |
| static bool nowayout = WATCHDOG_NOWAYOUT;
 | |
| module_param(nowayout, bool, 0);
 | |
| MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default ="
 | |
| 		__MODULE_STRING(WATCHDOG_NOWAYOUT)")");
 | |
| 
 | |
| static const struct watchdog_info ds1374_wdt_info = {
 | |
| 	.identity       = "DS1374 Watchdog",
 | |
| 	.options        = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
 | |
| 						WDIOF_MAGICCLOSE,
 | |
| };
 | |
| 
 | |
| static int ds1374_wdt_settimeout(struct watchdog_device *wdt, unsigned int timeout)
 | |
| {
 | |
| 	struct ds1374 *ds1374 = watchdog_get_drvdata(wdt);
 | |
| 	struct i2c_client *client = ds1374->client;
 | |
| 	int ret, cr;
 | |
| 
 | |
| 	wdt->timeout = timeout;
 | |
| 
 | |
| 	cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
 | |
| 	if (cr < 0)
 | |
| 		return cr;
 | |
| 
 | |
| 	/* Disable any existing watchdog/alarm before setting the new one */
 | |
| 	cr &= ~DS1374_REG_CR_WACE;
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Set new watchdog time */
 | |
| 	timeout = timeout * 4096;
 | |
| 	ret = ds1374_write_rtc(client, timeout, DS1374_REG_WDALM0, 3);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Enable watchdog timer */
 | |
| 	cr |= DS1374_REG_CR_WACE | DS1374_REG_CR_WDALM;
 | |
| 	cr &= ~DS1374_REG_CR_WDSTR;/* for RST PIN */
 | |
| 	cr &= ~DS1374_REG_CR_AIE;
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Reload the watchdog timer.  (ie, pat the watchdog)
 | |
|  */
 | |
| static int ds1374_wdt_start(struct watchdog_device *wdt)
 | |
| {
 | |
| 	struct ds1374 *ds1374 = watchdog_get_drvdata(wdt);
 | |
| 	u32 val;
 | |
| 
 | |
| 	return ds1374_read_rtc(ds1374->client, &val, DS1374_REG_WDALM0, 3);
 | |
| }
 | |
| 
 | |
| static int ds1374_wdt_stop(struct watchdog_device *wdt)
 | |
| {
 | |
| 	struct ds1374 *ds1374 = watchdog_get_drvdata(wdt);
 | |
| 	struct i2c_client *client = ds1374->client;
 | |
| 	int cr;
 | |
| 
 | |
| 	cr = i2c_smbus_read_byte_data(client, DS1374_REG_CR);
 | |
| 	if (cr < 0)
 | |
| 		return cr;
 | |
| 
 | |
| 	/* Disable watchdog timer */
 | |
| 	cr &= ~DS1374_REG_CR_WACE;
 | |
| 
 | |
| 	return i2c_smbus_write_byte_data(client, DS1374_REG_CR, cr);
 | |
| }
 | |
| 
 | |
| static const struct watchdog_ops ds1374_wdt_ops = {
 | |
| 	.owner          = THIS_MODULE,
 | |
| 	.start          = ds1374_wdt_start,
 | |
| 	.stop           = ds1374_wdt_stop,
 | |
| 	.set_timeout    = ds1374_wdt_settimeout,
 | |
| };
 | |
| #endif /*CONFIG_RTC_DRV_DS1374_WDT*/
 | |
| /*
 | |
|  *****************************************************************************
 | |
|  *
 | |
|  *	Driver Interface
 | |
|  *
 | |
|  *****************************************************************************
 | |
|  */
 | |
| static int ds1374_probe(struct i2c_client *client)
 | |
| {
 | |
| 	struct ds1374 *ds1374;
 | |
| 	int ret;
 | |
| 
 | |
| 	ds1374 = devm_kzalloc(&client->dev, sizeof(struct ds1374), GFP_KERNEL);
 | |
| 	if (!ds1374)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	ds1374->rtc = devm_rtc_allocate_device(&client->dev);
 | |
| 	if (IS_ERR(ds1374->rtc))
 | |
| 		return PTR_ERR(ds1374->rtc);
 | |
| 
 | |
| 	ds1374->client = client;
 | |
| 	i2c_set_clientdata(client, ds1374);
 | |
| 
 | |
| 	INIT_WORK(&ds1374->work, ds1374_work);
 | |
| 	mutex_init(&ds1374->mutex);
 | |
| 
 | |
| 	ret = ds1374_check_rtc_status(client);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	if (client->irq > 0) {
 | |
| 		ret = devm_request_irq(&client->dev, client->irq, ds1374_irq, 0,
 | |
| 					"ds1374", client);
 | |
| 		if (ret) {
 | |
| 			dev_err(&client->dev, "unable to request IRQ\n");
 | |
| 			return ret;
 | |
| 		}
 | |
| 
 | |
| 		device_set_wakeup_capable(&client->dev, 1);
 | |
| 	}
 | |
| 
 | |
| 	ds1374->rtc->ops = &ds1374_rtc_ops;
 | |
| 	ds1374->rtc->range_max = U32_MAX;
 | |
| 
 | |
| 	ret = devm_rtc_register_device(ds1374->rtc);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| #ifdef CONFIG_RTC_DRV_DS1374_WDT
 | |
| 	ds1374->wdt.info = &ds1374_wdt_info;
 | |
| 	ds1374->wdt.ops = &ds1374_wdt_ops;
 | |
| 	ds1374->wdt.timeout = TIMER_MARGIN_DEFAULT;
 | |
| 	ds1374->wdt.min_timeout = TIMER_MARGIN_MIN;
 | |
| 	ds1374->wdt.max_timeout = TIMER_MARGIN_MAX;
 | |
| 
 | |
| 	watchdog_init_timeout(&ds1374->wdt, wdt_margin, &client->dev);
 | |
| 	watchdog_set_nowayout(&ds1374->wdt, nowayout);
 | |
| 	watchdog_stop_on_reboot(&ds1374->wdt);
 | |
| 	watchdog_stop_on_unregister(&ds1374->wdt);
 | |
| 	watchdog_set_drvdata(&ds1374->wdt, ds1374);
 | |
| 	ds1374_wdt_settimeout(&ds1374->wdt, ds1374->wdt.timeout);
 | |
| 
 | |
| 	ret = devm_watchdog_register_device(&client->dev, &ds1374->wdt);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| #endif
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ds1374_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct ds1374 *ds1374 = i2c_get_clientdata(client);
 | |
| 
 | |
| 	if (client->irq > 0) {
 | |
| 		mutex_lock(&ds1374->mutex);
 | |
| 		ds1374->exiting = 1;
 | |
| 		mutex_unlock(&ds1374->mutex);
 | |
| 
 | |
| 		devm_free_irq(&client->dev, client->irq, client);
 | |
| 		cancel_work_sync(&ds1374->work);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_PM_SLEEP
 | |
| static int ds1374_suspend(struct device *dev)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 
 | |
| 	if (client->irq > 0 && device_may_wakeup(&client->dev))
 | |
| 		enable_irq_wake(client->irq);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int ds1374_resume(struct device *dev)
 | |
| {
 | |
| 	struct i2c_client *client = to_i2c_client(dev);
 | |
| 
 | |
| 	if (client->irq > 0 && device_may_wakeup(&client->dev))
 | |
| 		disable_irq_wake(client->irq);
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static SIMPLE_DEV_PM_OPS(ds1374_pm, ds1374_suspend, ds1374_resume);
 | |
| 
 | |
| static struct i2c_driver ds1374_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "rtc-ds1374",
 | |
| 		.of_match_table = of_match_ptr(ds1374_of_match),
 | |
| 		.pm = &ds1374_pm,
 | |
| 	},
 | |
| 	.probe_new = ds1374_probe,
 | |
| 	.remove = ds1374_remove,
 | |
| 	.id_table = ds1374_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(ds1374_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Scott Wood <scottwood@freescale.com>");
 | |
| MODULE_DESCRIPTION("Maxim/Dallas DS1374 RTC Driver");
 | |
| MODULE_LICENSE("GPL");
 |