535 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			535 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * Regulator driver for tps65090 power management chip.
 | |
|  *
 | |
|  * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
 | |
| 
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/regulator/driver.h>
 | |
| #include <linux/regulator/machine.h>
 | |
| #include <linux/regulator/of_regulator.h>
 | |
| #include <linux/mfd/tps65090.h>
 | |
| 
 | |
| #define MAX_CTRL_READ_TRIES	5
 | |
| #define MAX_FET_ENABLE_TRIES	1000
 | |
| 
 | |
| #define CTRL_EN_BIT		0 /* Regulator enable bit, active high */
 | |
| #define CTRL_WT_BIT		2 /* Regulator wait time 0 bit */
 | |
| #define CTRL_PG_BIT		4 /* Regulator power good bit, 1=good */
 | |
| #define CTRL_TO_BIT		7 /* Regulator timeout bit, 1=wait */
 | |
| 
 | |
| #define MAX_OVERCURRENT_WAIT	3 /* Overcurrent wait must be <= this */
 | |
| 
 | |
| /**
 | |
|  * struct tps65090_regulator - Per-regulator data for a tps65090 regulator
 | |
|  *
 | |
|  * @dev: Pointer to our device.
 | |
|  * @desc: The struct regulator_desc for the regulator.
 | |
|  * @rdev: The struct regulator_dev for the regulator.
 | |
|  * @overcurrent_wait_valid: True if overcurrent_wait is valid.
 | |
|  * @overcurrent_wait: For FETs, the value to put in the WTFET bitfield.
 | |
|  */
 | |
| 
 | |
| struct tps65090_regulator {
 | |
| 	struct device		*dev;
 | |
| 	struct regulator_desc	*desc;
 | |
| 	struct regulator_dev	*rdev;
 | |
| 	bool			overcurrent_wait_valid;
 | |
| 	int			overcurrent_wait;
 | |
| };
 | |
| 
 | |
| static const struct regulator_ops tps65090_ext_control_ops = {
 | |
| };
 | |
| 
 | |
| /**
 | |
|  * tps65090_reg_set_overcurrent_wait - Setup overcurrent wait
 | |
|  *
 | |
|  * This will set the overcurrent wait time based on what's in the regulator
 | |
|  * info.
 | |
|  *
 | |
|  * @ri:		Overall regulator data
 | |
|  * @rdev:	Regulator device
 | |
|  *
 | |
|  * Return: 0 if no error, non-zero if there was an error writing the register.
 | |
|  */
 | |
| static int tps65090_reg_set_overcurrent_wait(struct tps65090_regulator *ri,
 | |
| 					     struct regulator_dev *rdev)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 | |
| 				 MAX_OVERCURRENT_WAIT << CTRL_WT_BIT,
 | |
| 				 ri->overcurrent_wait << CTRL_WT_BIT);
 | |
| 	if (ret) {
 | |
| 		dev_err(&rdev->dev, "Error updating overcurrent wait %#x\n",
 | |
| 			rdev->desc->enable_reg);
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * tps65090_try_enable_fet - Try to enable a FET
 | |
|  *
 | |
|  * @rdev:	Regulator device
 | |
|  *
 | |
|  * Return: 0 if ok, -ENOTRECOVERABLE if the FET power good bit did not get
 | |
|  * set, or some other -ve value if another error occurred (e.g. i2c error)
 | |
|  */
 | |
| static int tps65090_try_enable_fet(struct regulator_dev *rdev)
 | |
| {
 | |
| 	unsigned int control;
 | |
| 	int ret, i;
 | |
| 
 | |
| 	ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 | |
| 				 rdev->desc->enable_mask,
 | |
| 				 rdev->desc->enable_mask);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&rdev->dev, "Error in updating reg %#x\n",
 | |
| 			rdev->desc->enable_reg);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < MAX_CTRL_READ_TRIES; i++) {
 | |
| 		ret = regmap_read(rdev->regmap, rdev->desc->enable_reg,
 | |
| 				  &control);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 
 | |
| 		if (!(control & BIT(CTRL_TO_BIT)))
 | |
| 			break;
 | |
| 
 | |
| 		usleep_range(1000, 1500);
 | |
| 	}
 | |
| 	if (!(control & BIT(CTRL_PG_BIT)))
 | |
| 		return -ENOTRECOVERABLE;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * tps65090_fet_enable - Enable a FET, trying a few times if it fails
 | |
|  *
 | |
|  * Some versions of the tps65090 have issues when turning on the FETs.
 | |
|  * This function goes through several steps to ensure the best chance of the
 | |
|  * FET going on.  Specifically:
 | |
|  * - We'll make sure that we bump the "overcurrent wait" to the maximum, which
 | |
|  *   increases the chances that we'll turn on properly.
 | |
|  * - We'll retry turning the FET on multiple times (turning off in between).
 | |
|  *
 | |
|  * @rdev:	Regulator device
 | |
|  *
 | |
|  * Return: 0 if ok, non-zero if it fails.
 | |
|  */
 | |
| static int tps65090_fet_enable(struct regulator_dev *rdev)
 | |
| {
 | |
| 	int ret, tries;
 | |
| 
 | |
| 	/*
 | |
| 	 * Try enabling multiple times until we succeed since sometimes the
 | |
| 	 * first try times out.
 | |
| 	 */
 | |
| 	tries = 0;
 | |
| 	while (true) {
 | |
| 		ret = tps65090_try_enable_fet(rdev);
 | |
| 		if (!ret)
 | |
| 			break;
 | |
| 		if (ret != -ENOTRECOVERABLE || tries == MAX_FET_ENABLE_TRIES)
 | |
| 			goto err;
 | |
| 
 | |
| 		/* Try turning the FET off (and then on again) */
 | |
| 		ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
 | |
| 					 rdev->desc->enable_mask, 0);
 | |
| 		if (ret)
 | |
| 			goto err;
 | |
| 
 | |
| 		tries++;
 | |
| 	}
 | |
| 
 | |
| 	if (tries)
 | |
| 		dev_warn(&rdev->dev, "reg %#x enable ok after %d tries\n",
 | |
| 			 rdev->desc->enable_reg, tries);
 | |
| 
 | |
| 	return 0;
 | |
| err:
 | |
| 	dev_warn(&rdev->dev, "reg %#x enable failed\n", rdev->desc->enable_reg);
 | |
| 	WARN_ON(1);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static const struct regulator_ops tps65090_reg_control_ops = {
 | |
| 	.enable		= regulator_enable_regmap,
 | |
| 	.disable	= regulator_disable_regmap,
 | |
| 	.is_enabled	= regulator_is_enabled_regmap,
 | |
| };
 | |
| 
 | |
| static const struct regulator_ops tps65090_fet_control_ops = {
 | |
| 	.enable		= tps65090_fet_enable,
 | |
| 	.disable	= regulator_disable_regmap,
 | |
| 	.is_enabled	= regulator_is_enabled_regmap,
 | |
| };
 | |
| 
 | |
| static const struct regulator_ops tps65090_ldo_ops = {
 | |
| };
 | |
| 
 | |
| #define tps65090_REG_DESC(_id, _sname, _en_reg, _en_bits, _nvolt, _volt, _ops) \
 | |
| {							\
 | |
| 	.name = "TPS65090_RAILS"#_id,			\
 | |
| 	.supply_name = _sname,				\
 | |
| 	.id = TPS65090_REGULATOR_##_id,			\
 | |
| 	.n_voltages = _nvolt,				\
 | |
| 	.ops = &_ops,					\
 | |
| 	.fixed_uV = _volt,				\
 | |
| 	.enable_reg = _en_reg,				\
 | |
| 	.enable_val = _en_bits,				\
 | |
| 	.enable_mask = _en_bits,			\
 | |
| 	.type = REGULATOR_VOLTAGE,			\
 | |
| 	.owner = THIS_MODULE,				\
 | |
| }
 | |
| 
 | |
| #define tps65090_REG_FIXEDV(_id, _sname, en_reg, _en_bits, _volt, _ops) \
 | |
| 	tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 1, _volt, _ops)
 | |
| 
 | |
| #define tps65090_REG_SWITCH(_id, _sname, en_reg, _en_bits, _ops) \
 | |
| 	tps65090_REG_DESC(_id, _sname, en_reg, _en_bits, 0, 0, _ops)
 | |
| 
 | |
| static struct regulator_desc tps65090_regulator_desc[] = {
 | |
| 	tps65090_REG_FIXEDV(DCDC1, "vsys1",   0x0C, BIT(CTRL_EN_BIT), 5000000,
 | |
| 			    tps65090_reg_control_ops),
 | |
| 	tps65090_REG_FIXEDV(DCDC2, "vsys2",   0x0D, BIT(CTRL_EN_BIT), 3300000,
 | |
| 			    tps65090_reg_control_ops),
 | |
| 	tps65090_REG_SWITCH(DCDC3, "vsys3",   0x0E, BIT(CTRL_EN_BIT),
 | |
| 			    tps65090_reg_control_ops),
 | |
| 
 | |
| 	tps65090_REG_SWITCH(FET1,  "infet1",  0x0F,
 | |
| 			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 | |
| 			    tps65090_fet_control_ops),
 | |
| 	tps65090_REG_SWITCH(FET2,  "infet2",  0x10,
 | |
| 			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 | |
| 			    tps65090_fet_control_ops),
 | |
| 	tps65090_REG_SWITCH(FET3,  "infet3",  0x11,
 | |
| 			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 | |
| 			    tps65090_fet_control_ops),
 | |
| 	tps65090_REG_SWITCH(FET4,  "infet4",  0x12,
 | |
| 			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 | |
| 			    tps65090_fet_control_ops),
 | |
| 	tps65090_REG_SWITCH(FET5,  "infet5",  0x13,
 | |
| 			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 | |
| 			    tps65090_fet_control_ops),
 | |
| 	tps65090_REG_SWITCH(FET6,  "infet6",  0x14,
 | |
| 			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 | |
| 			    tps65090_fet_control_ops),
 | |
| 	tps65090_REG_SWITCH(FET7,  "infet7",  0x15,
 | |
| 			    BIT(CTRL_EN_BIT) | BIT(CTRL_PG_BIT),
 | |
| 			    tps65090_fet_control_ops),
 | |
| 
 | |
| 	tps65090_REG_FIXEDV(LDO1,  "vsys-l1", 0, 0, 5000000,
 | |
| 			    tps65090_ldo_ops),
 | |
| 	tps65090_REG_FIXEDV(LDO2,  "vsys-l2", 0, 0, 3300000,
 | |
| 			    tps65090_ldo_ops),
 | |
| };
 | |
| 
 | |
| static inline bool is_dcdc(int id)
 | |
| {
 | |
| 	switch (id) {
 | |
| 	case TPS65090_REGULATOR_DCDC1:
 | |
| 	case TPS65090_REGULATOR_DCDC2:
 | |
| 	case TPS65090_REGULATOR_DCDC3:
 | |
| 		return true;
 | |
| 	default:
 | |
| 		return false;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int tps65090_config_ext_control(
 | |
| 	struct tps65090_regulator *ri, bool enable)
 | |
| {
 | |
| 	int ret;
 | |
| 	struct device *parent = ri->dev->parent;
 | |
| 	unsigned int reg_en_reg = ri->desc->enable_reg;
 | |
| 
 | |
| 	if (enable)
 | |
| 		ret = tps65090_set_bits(parent, reg_en_reg, 1);
 | |
| 	else
 | |
| 		ret =  tps65090_clr_bits(parent, reg_en_reg, 1);
 | |
| 	if (ret < 0)
 | |
| 		dev_err(ri->dev, "Error in updating reg 0x%x\n", reg_en_reg);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int tps65090_regulator_disable_ext_control(
 | |
| 		struct tps65090_regulator *ri,
 | |
| 		struct tps65090_regulator_plat_data *tps_pdata)
 | |
| {
 | |
| 	int ret = 0;
 | |
| 	struct device *parent = ri->dev->parent;
 | |
| 	unsigned int reg_en_reg = ri->desc->enable_reg;
 | |
| 
 | |
| 	/*
 | |
| 	 * First enable output for internal control if require.
 | |
| 	 * And then disable external control.
 | |
| 	 */
 | |
| 	if (tps_pdata->reg_init_data->constraints.always_on ||
 | |
| 			tps_pdata->reg_init_data->constraints.boot_on) {
 | |
| 		ret =  tps65090_set_bits(parent, reg_en_reg, 0);
 | |
| 		if (ret < 0) {
 | |
| 			dev_err(ri->dev, "Error in set reg 0x%x\n", reg_en_reg);
 | |
| 			return ret;
 | |
| 		}
 | |
| 	}
 | |
| 	return tps65090_config_ext_control(ri, false);
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_OF
 | |
| static struct of_regulator_match tps65090_matches[] = {
 | |
| 	{ .name = "dcdc1", },
 | |
| 	{ .name = "dcdc2", },
 | |
| 	{ .name = "dcdc3", },
 | |
| 	{ .name = "fet1",  },
 | |
| 	{ .name = "fet2",  },
 | |
| 	{ .name = "fet3",  },
 | |
| 	{ .name = "fet4",  },
 | |
| 	{ .name = "fet5",  },
 | |
| 	{ .name = "fet6",  },
 | |
| 	{ .name = "fet7",  },
 | |
| 	{ .name = "ldo1",  },
 | |
| 	{ .name = "ldo2",  },
 | |
| };
 | |
| 
 | |
| static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
 | |
| 		struct platform_device *pdev,
 | |
| 		struct of_regulator_match **tps65090_reg_matches)
 | |
| {
 | |
| 	struct tps65090_platform_data *tps65090_pdata;
 | |
| 	struct device_node *np = pdev->dev.parent->of_node;
 | |
| 	struct device_node *regulators;
 | |
| 	int idx = 0, ret;
 | |
| 	struct tps65090_regulator_plat_data *reg_pdata;
 | |
| 
 | |
| 	tps65090_pdata = devm_kzalloc(&pdev->dev, sizeof(*tps65090_pdata),
 | |
| 				GFP_KERNEL);
 | |
| 	if (!tps65090_pdata)
 | |
| 		return ERR_PTR(-ENOMEM);
 | |
| 
 | |
| 	reg_pdata = devm_kcalloc(&pdev->dev,
 | |
| 				 TPS65090_REGULATOR_MAX, sizeof(*reg_pdata),
 | |
| 				 GFP_KERNEL);
 | |
| 	if (!reg_pdata)
 | |
| 		return ERR_PTR(-ENOMEM);
 | |
| 
 | |
| 	regulators = of_get_child_by_name(np, "regulators");
 | |
| 	if (!regulators) {
 | |
| 		dev_err(&pdev->dev, "regulator node not found\n");
 | |
| 		return ERR_PTR(-ENODEV);
 | |
| 	}
 | |
| 
 | |
| 	ret = of_regulator_match(&pdev->dev, regulators, tps65090_matches,
 | |
| 			ARRAY_SIZE(tps65090_matches));
 | |
| 	of_node_put(regulators);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&pdev->dev,
 | |
| 			"Error parsing regulator init data: %d\n", ret);
 | |
| 		return ERR_PTR(ret);
 | |
| 	}
 | |
| 
 | |
| 	*tps65090_reg_matches = tps65090_matches;
 | |
| 	for (idx = 0; idx < ARRAY_SIZE(tps65090_matches); idx++) {
 | |
| 		struct regulator_init_data *ri_data;
 | |
| 		struct tps65090_regulator_plat_data *rpdata;
 | |
| 		struct device_node *np;
 | |
| 
 | |
| 		rpdata = ®_pdata[idx];
 | |
| 		ri_data = tps65090_matches[idx].init_data;
 | |
| 		if (!ri_data)
 | |
| 			continue;
 | |
| 
 | |
| 		np = tps65090_matches[idx].of_node;
 | |
| 		if (!np)
 | |
| 			continue;
 | |
| 
 | |
| 		rpdata->reg_init_data = ri_data;
 | |
| 		rpdata->enable_ext_control = of_property_read_bool(np,
 | |
| 						"ti,enable-ext-control");
 | |
| 		if (rpdata->enable_ext_control) {
 | |
| 			enum gpiod_flags gflags;
 | |
| 
 | |
| 			if (ri_data->constraints.always_on ||
 | |
| 			    ri_data->constraints.boot_on)
 | |
| 				gflags = GPIOD_OUT_HIGH;
 | |
| 			else
 | |
| 				gflags = GPIOD_OUT_LOW;
 | |
| 			gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
 | |
| 
 | |
| 			rpdata->gpiod = devm_fwnode_gpiod_get(
 | |
| 							&pdev->dev,
 | |
| 							of_fwnode_handle(np),
 | |
| 							"dcdc-ext-control",
 | |
| 							gflags,
 | |
| 							"tps65090");
 | |
| 			if (PTR_ERR(rpdata->gpiod) == -ENOENT) {
 | |
| 				dev_err(&pdev->dev,
 | |
| 					"could not find DCDC external control GPIO\n");
 | |
| 				rpdata->gpiod = NULL;
 | |
| 			} else if (IS_ERR(rpdata->gpiod))
 | |
| 				return ERR_CAST(rpdata->gpiod);
 | |
| 		}
 | |
| 
 | |
| 		if (of_property_read_u32(np, "ti,overcurrent-wait",
 | |
| 					 &rpdata->overcurrent_wait) == 0)
 | |
| 			rpdata->overcurrent_wait_valid = true;
 | |
| 
 | |
| 		tps65090_pdata->reg_pdata[idx] = rpdata;
 | |
| 	}
 | |
| 	return tps65090_pdata;
 | |
| }
 | |
| #else
 | |
| static inline struct tps65090_platform_data *tps65090_parse_dt_reg_data(
 | |
| 			struct platform_device *pdev,
 | |
| 			struct of_regulator_match **tps65090_reg_matches)
 | |
| {
 | |
| 	*tps65090_reg_matches = NULL;
 | |
| 	return NULL;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static int tps65090_regulator_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct tps65090 *tps65090_mfd = dev_get_drvdata(pdev->dev.parent);
 | |
| 	struct tps65090_regulator *ri = NULL;
 | |
| 	struct regulator_config config = { };
 | |
| 	struct regulator_dev *rdev;
 | |
| 	struct tps65090_regulator_plat_data *tps_pdata;
 | |
| 	struct tps65090_regulator *pmic;
 | |
| 	struct tps65090_platform_data *tps65090_pdata;
 | |
| 	struct of_regulator_match *tps65090_reg_matches = NULL;
 | |
| 	int num;
 | |
| 	int ret;
 | |
| 
 | |
| 	dev_dbg(&pdev->dev, "Probing regulator\n");
 | |
| 
 | |
| 	tps65090_pdata = dev_get_platdata(pdev->dev.parent);
 | |
| 	if (!tps65090_pdata && tps65090_mfd->dev->of_node)
 | |
| 		tps65090_pdata = tps65090_parse_dt_reg_data(pdev,
 | |
| 					&tps65090_reg_matches);
 | |
| 	if (IS_ERR_OR_NULL(tps65090_pdata)) {
 | |
| 		dev_err(&pdev->dev, "Platform data missing\n");
 | |
| 		return tps65090_pdata ? PTR_ERR(tps65090_pdata) : -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	pmic = devm_kcalloc(&pdev->dev,
 | |
| 			    TPS65090_REGULATOR_MAX, sizeof(*pmic),
 | |
| 			    GFP_KERNEL);
 | |
| 	if (!pmic)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	for (num = 0; num < TPS65090_REGULATOR_MAX; num++) {
 | |
| 		tps_pdata = tps65090_pdata->reg_pdata[num];
 | |
| 
 | |
| 		ri = &pmic[num];
 | |
| 		ri->dev = &pdev->dev;
 | |
| 		ri->desc = &tps65090_regulator_desc[num];
 | |
| 		if (tps_pdata) {
 | |
| 			ri->overcurrent_wait_valid =
 | |
| 				tps_pdata->overcurrent_wait_valid;
 | |
| 			ri->overcurrent_wait = tps_pdata->overcurrent_wait;
 | |
| 		}
 | |
| 
 | |
| 		/*
 | |
| 		 * TPS5090 DCDC support the control from external digital input.
 | |
| 		 * Configure it as per platform data.
 | |
| 		 */
 | |
| 		if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data) {
 | |
| 			if (tps_pdata->enable_ext_control) {
 | |
| 				config.ena_gpiod = tps_pdata->gpiod;
 | |
| 				ri->desc->ops = &tps65090_ext_control_ops;
 | |
| 			} else {
 | |
| 				ret = tps65090_regulator_disable_ext_control(
 | |
| 						ri, tps_pdata);
 | |
| 				if (ret < 0) {
 | |
| 					dev_err(&pdev->dev,
 | |
| 						"failed disable ext control\n");
 | |
| 					return ret;
 | |
| 				}
 | |
| 			}
 | |
| 		}
 | |
| 
 | |
| 		config.dev = pdev->dev.parent;
 | |
| 		config.driver_data = ri;
 | |
| 		config.regmap = tps65090_mfd->rmap;
 | |
| 		if (tps_pdata)
 | |
| 			config.init_data = tps_pdata->reg_init_data;
 | |
| 		else
 | |
| 			config.init_data = NULL;
 | |
| 		if (tps65090_reg_matches)
 | |
| 			config.of_node = tps65090_reg_matches[num].of_node;
 | |
| 		else
 | |
| 			config.of_node = NULL;
 | |
| 
 | |
| 		/*
 | |
| 		 * Hand the GPIO descriptor management over to the regulator
 | |
| 		 * core, remove it from devres management.
 | |
| 		 */
 | |
| 		if (config.ena_gpiod)
 | |
| 			devm_gpiod_unhinge(&pdev->dev, config.ena_gpiod);
 | |
| 		rdev = devm_regulator_register(&pdev->dev, ri->desc, &config);
 | |
| 		if (IS_ERR(rdev)) {
 | |
| 			dev_err(&pdev->dev, "failed to register regulator %s\n",
 | |
| 				ri->desc->name);
 | |
| 			return PTR_ERR(rdev);
 | |
| 		}
 | |
| 		ri->rdev = rdev;
 | |
| 
 | |
| 		if (ri->overcurrent_wait_valid) {
 | |
| 			ret = tps65090_reg_set_overcurrent_wait(ri, rdev);
 | |
| 			if (ret < 0)
 | |
| 				return ret;
 | |
| 		}
 | |
| 
 | |
| 		/* Enable external control if it is require */
 | |
| 		if (tps_pdata && is_dcdc(num) && tps_pdata->reg_init_data &&
 | |
| 				tps_pdata->enable_ext_control) {
 | |
| 			ret = tps65090_config_ext_control(ri, true);
 | |
| 			if (ret < 0)
 | |
| 				return ret;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	platform_set_drvdata(pdev, pmic);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct platform_driver tps65090_regulator_driver = {
 | |
| 	.driver	= {
 | |
| 		.name	= "tps65090-pmic",
 | |
| 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 | |
| 	},
 | |
| 	.probe		= tps65090_regulator_probe,
 | |
| };
 | |
| 
 | |
| static int __init tps65090_regulator_init(void)
 | |
| {
 | |
| 	return platform_driver_register(&tps65090_regulator_driver);
 | |
| }
 | |
| subsys_initcall(tps65090_regulator_init);
 | |
| 
 | |
| static void __exit tps65090_regulator_exit(void)
 | |
| {
 | |
| 	platform_driver_unregister(&tps65090_regulator_driver);
 | |
| }
 | |
| module_exit(tps65090_regulator_exit);
 | |
| 
 | |
| MODULE_DESCRIPTION("tps65090 regulator driver");
 | |
| MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
 | |
| MODULE_LICENSE("GPL v2");
 | |
| MODULE_ALIAS("platform:tps65090-pmic");
 |