335 lines
		
	
	
		
			8.0 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			335 lines
		
	
	
		
			8.0 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-or-later
 | |
| //
 | |
| // max20086-regulator.c - MAX20086-MAX20089 camera power protector driver
 | |
| //
 | |
| // Copyright (C) 2022 Laurent Pinchart <laurent.pinchart@idesonboard.com>
 | |
| // Copyright (C) 2018 Avnet, Inc.
 | |
| 
 | |
| #include <linux/err.h>
 | |
| #include <linux/gpio.h>
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/regulator/driver.h>
 | |
| #include <linux/regulator/machine.h>
 | |
| #include <linux/regulator/of_regulator.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| /* Register Offset */
 | |
| #define MAX20086_REG_MASK		0x00
 | |
| #define MAX20086_REG_CONFIG		0x01
 | |
| #define	MAX20086_REG_ID			0x02
 | |
| #define	MAX20086_REG_STAT1		0x03
 | |
| #define	MAX20086_REG_STAT2_L		0x04
 | |
| #define	MAX20086_REG_STAT2_H		0x05
 | |
| #define	MAX20086_REG_ADC1		0x06
 | |
| #define	MAX20086_REG_ADC2		0x07
 | |
| #define	MAX20086_REG_ADC3		0x08
 | |
| #define	MAX20086_REG_ADC4		0x09
 | |
| 
 | |
| /* DEVICE IDs */
 | |
| #define MAX20086_DEVICE_ID_MAX20086	0x40
 | |
| #define MAX20086_DEVICE_ID_MAX20087	0x20
 | |
| #define MAX20086_DEVICE_ID_MAX20088	0x10
 | |
| #define MAX20086_DEVICE_ID_MAX20089	0x00
 | |
| #define DEVICE_ID_MASK			0xf0
 | |
| 
 | |
| /* Register bits */
 | |
| #define MAX20086_EN_MASK		0x0f
 | |
| #define MAX20086_EN_OUT1		0x01
 | |
| #define MAX20086_EN_OUT2		0x02
 | |
| #define MAX20086_EN_OUT3		0x04
 | |
| #define MAX20086_EN_OUT4		0x08
 | |
| #define MAX20086_INT_DISABLE_ALL	0x3f
 | |
| 
 | |
| #define MAX20086_MAX_REGULATORS		4
 | |
| 
 | |
| struct max20086_chip_info {
 | |
| 	u8 id;
 | |
| 	unsigned int num_outputs;
 | |
| };
 | |
| 
 | |
| struct max20086_regulator {
 | |
| 	struct device_node *of_node;
 | |
| 	struct regulator_init_data *init_data;
 | |
| 	const struct regulator_desc *desc;
 | |
| 	struct regulator_dev *rdev;
 | |
| };
 | |
| 
 | |
| struct max20086 {
 | |
| 	struct device *dev;
 | |
| 	struct regmap *regmap;
 | |
| 	struct gpio_desc *ena_gpiod;
 | |
| 
 | |
| 	const struct max20086_chip_info *info;
 | |
| 
 | |
| 	struct max20086_regulator regulators[MAX20086_MAX_REGULATORS];
 | |
| };
 | |
| 
 | |
| static const struct regulator_ops max20086_buck_ops = {
 | |
| 	.enable = regulator_enable_regmap,
 | |
| 	.disable = regulator_disable_regmap,
 | |
| 	.is_enabled = regulator_is_enabled_regmap,
 | |
| };
 | |
| 
 | |
| #define MAX20086_REGULATOR_DESC(n)		\
 | |
| {						\
 | |
| 	.name = "OUT"#n,			\
 | |
| 	.supply_name = "in",			\
 | |
| 	.id = (n) - 1,				\
 | |
| 	.ops = &max20086_buck_ops,		\
 | |
| 	.type = REGULATOR_VOLTAGE,		\
 | |
| 	.owner = THIS_MODULE,			\
 | |
| 	.enable_reg = MAX20086_REG_CONFIG,	\
 | |
| 	.enable_mask = 1 << ((n) - 1),		\
 | |
| 	.enable_val = 1 << ((n) - 1),		\
 | |
| 	.disable_val = 0,			\
 | |
| }
 | |
| 
 | |
| static const char * const max20086_output_names[] = {
 | |
| 	"OUT1",
 | |
| 	"OUT2",
 | |
| 	"OUT3",
 | |
| 	"OUT4",
 | |
| };
 | |
| 
 | |
| static const struct regulator_desc max20086_regulators[] = {
 | |
| 	MAX20086_REGULATOR_DESC(1),
 | |
| 	MAX20086_REGULATOR_DESC(2),
 | |
| 	MAX20086_REGULATOR_DESC(3),
 | |
| 	MAX20086_REGULATOR_DESC(4),
 | |
| };
 | |
| 
 | |
| static int max20086_regulators_register(struct max20086 *chip)
 | |
| {
 | |
| 	unsigned int i;
 | |
| 
 | |
| 	for (i = 0; i < chip->info->num_outputs; i++) {
 | |
| 		struct max20086_regulator *reg = &chip->regulators[i];
 | |
| 		struct regulator_config config = { };
 | |
| 		struct regulator_dev *rdev;
 | |
| 
 | |
| 		config.dev = chip->dev;
 | |
| 		config.init_data = reg->init_data;
 | |
| 		config.driver_data = chip;
 | |
| 		config.of_node = reg->of_node;
 | |
| 		config.regmap = chip->regmap;
 | |
| 		config.ena_gpiod = chip->ena_gpiod;
 | |
| 
 | |
| 		rdev = devm_regulator_register(chip->dev, reg->desc, &config);
 | |
| 		if (IS_ERR(rdev)) {
 | |
| 			dev_err(chip->dev,
 | |
| 				"Failed to register regulator output %s\n",
 | |
| 				reg->desc->name);
 | |
| 			return PTR_ERR(rdev);
 | |
| 		}
 | |
| 
 | |
| 		reg->rdev = rdev;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int max20086_parse_regulators_dt(struct max20086 *chip, bool *boot_on)
 | |
| {
 | |
| 	struct of_regulator_match matches[MAX20086_MAX_REGULATORS] = { };
 | |
| 	struct device_node *node;
 | |
| 	unsigned int i;
 | |
| 	int ret;
 | |
| 
 | |
| 	node = of_get_child_by_name(chip->dev->of_node, "regulators");
 | |
| 	if (!node) {
 | |
| 		dev_err(chip->dev, "regulators node not found\n");
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < chip->info->num_outputs; ++i)
 | |
| 		matches[i].name = max20086_output_names[i];
 | |
| 
 | |
| 	ret = of_regulator_match(chip->dev, node, matches,
 | |
| 				 chip->info->num_outputs);
 | |
| 	of_node_put(node);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(chip->dev, "Failed to match regulators\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	*boot_on = false;
 | |
| 
 | |
| 	for (i = 0; i < chip->info->num_outputs; i++) {
 | |
| 		struct max20086_regulator *reg = &chip->regulators[i];
 | |
| 
 | |
| 		reg->init_data = matches[i].init_data;
 | |
| 		reg->of_node = matches[i].of_node;
 | |
| 		reg->desc = &max20086_regulators[i];
 | |
| 
 | |
| 		if (reg->init_data) {
 | |
| 			if (reg->init_data->constraints.always_on ||
 | |
| 			    reg->init_data->constraints.boot_on)
 | |
| 				*boot_on = true;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int max20086_detect(struct max20086 *chip)
 | |
| {
 | |
| 	unsigned int data;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_read(chip->regmap, MAX20086_REG_ID, &data);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(chip->dev, "Failed to read DEVICE_ID reg: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	if ((data & DEVICE_ID_MASK) != chip->info->id) {
 | |
| 		dev_err(chip->dev, "Invalid device ID 0x%02x\n", data);
 | |
| 		return -ENXIO;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static bool max20086_gen_is_writeable_reg(struct device *dev, unsigned int reg)
 | |
| {
 | |
| 	switch (reg) {
 | |
| 	case MAX20086_REG_MASK:
 | |
| 	case MAX20086_REG_CONFIG:
 | |
| 		return true;
 | |
| 	default:
 | |
| 		return false;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static const struct regmap_config max20086_regmap_config = {
 | |
| 	.reg_bits = 8,
 | |
| 	.val_bits = 8,
 | |
| 	.writeable_reg = max20086_gen_is_writeable_reg,
 | |
| 	.max_register = 0x9,
 | |
| 	.cache_type = REGCACHE_NONE,
 | |
| };
 | |
| 
 | |
| static int max20086_i2c_probe(struct i2c_client *i2c)
 | |
| {
 | |
| 	struct max20086 *chip;
 | |
| 	enum gpiod_flags flags;
 | |
| 	bool boot_on;
 | |
| 	int ret;
 | |
| 
 | |
| 	chip = devm_kzalloc(&i2c->dev, sizeof(*chip), GFP_KERNEL);
 | |
| 	if (!chip)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	chip->dev = &i2c->dev;
 | |
| 	chip->info = device_get_match_data(chip->dev);
 | |
| 
 | |
| 	i2c_set_clientdata(i2c, chip);
 | |
| 
 | |
| 	chip->regmap = devm_regmap_init_i2c(i2c, &max20086_regmap_config);
 | |
| 	if (IS_ERR(chip->regmap)) {
 | |
| 		ret = PTR_ERR(chip->regmap);
 | |
| 		dev_err(chip->dev, "Failed to allocate register map: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = max20086_parse_regulators_dt(chip, &boot_on);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = max20086_detect(chip);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Until IRQ support is added, just disable all interrupts. */
 | |
| 	ret = regmap_update_bits(chip->regmap, MAX20086_REG_MASK,
 | |
| 				 MAX20086_INT_DISABLE_ALL,
 | |
| 				 MAX20086_INT_DISABLE_ALL);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(chip->dev, "Failed to disable interrupts: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Get the enable GPIO. If any of the outputs is marked as being
 | |
| 	 * enabled at boot, request the GPIO with an initial high state to
 | |
| 	 * avoid disabling outputs that may have been turned on by the boot
 | |
| 	 * loader. Otherwise, request it with a low state to enter lower-power
 | |
| 	 * shutdown.
 | |
| 	 */
 | |
| 	flags = boot_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
 | |
| 	chip->ena_gpiod = devm_gpiod_get(chip->dev, "enable", flags);
 | |
| 	if (IS_ERR(chip->ena_gpiod)) {
 | |
| 		ret = PTR_ERR(chip->ena_gpiod);
 | |
| 		dev_err(chip->dev, "Failed to get enable GPIO: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = max20086_regulators_register(chip);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(chip->dev, "Failed to register regulators: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id max20086_i2c_id[] = {
 | |
| 	{ "max20086" },
 | |
| 	{ "max20087" },
 | |
| 	{ "max20088" },
 | |
| 	{ "max20089" },
 | |
| 	{ /* Sentinel */ },
 | |
| };
 | |
| 
 | |
| MODULE_DEVICE_TABLE(i2c, max20086_i2c_id);
 | |
| 
 | |
| static const struct of_device_id max20086_dt_ids[] __maybe_unused = {
 | |
| 	{
 | |
| 		.compatible = "maxim,max20086",
 | |
| 		.data = &(const struct max20086_chip_info) {
 | |
| 			.id = MAX20086_DEVICE_ID_MAX20086,
 | |
| 			.num_outputs = 4,
 | |
| 		}
 | |
| 	}, {
 | |
| 		.compatible = "maxim,max20087",
 | |
| 		.data = &(const struct max20086_chip_info) {
 | |
| 			.id = MAX20086_DEVICE_ID_MAX20087,
 | |
| 			.num_outputs = 4,
 | |
| 		}
 | |
| 	}, {
 | |
| 		.compatible = "maxim,max20088",
 | |
| 		.data = &(const struct max20086_chip_info) {
 | |
| 			.id = MAX20086_DEVICE_ID_MAX20088,
 | |
| 			.num_outputs = 2,
 | |
| 		}
 | |
| 	}, {
 | |
| 		.compatible = "maxim,max20089",
 | |
| 		.data = &(const struct max20086_chip_info) {
 | |
| 			.id = MAX20086_DEVICE_ID_MAX20089,
 | |
| 			.num_outputs = 2,
 | |
| 		}
 | |
| 	},
 | |
| 	{ /* Sentinel */ },
 | |
| };
 | |
| 
 | |
| MODULE_DEVICE_TABLE(of, max20086_dt_ids);
 | |
| 
 | |
| static struct i2c_driver max20086_regulator_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "max20086",
 | |
| 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
 | |
| 		.of_match_table = of_match_ptr(max20086_dt_ids),
 | |
| 	},
 | |
| 	.probe_new = max20086_i2c_probe,
 | |
| 	.id_table = max20086_i2c_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(max20086_regulator_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Watson Chow <watson.chow@avnet.com>");
 | |
| MODULE_DESCRIPTION("MAX20086-MAX20089 Camera Power Protector Driver");
 | |
| MODULE_LICENSE("GPL");
 |