310 lines
		
	
	
		
			7.3 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			310 lines
		
	
	
		
			7.3 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0+
 | |
| /*
 | |
|  * cpcihp_zt5550.c
 | |
|  *
 | |
|  * Intel/Ziatech ZT5550 CompactPCI Host Controller driver
 | |
|  *
 | |
|  * Copyright 2002 SOMA Networks, Inc.
 | |
|  * Copyright 2001 Intel San Luis Obispo
 | |
|  * Copyright 2000,2001 MontaVista Software Inc.
 | |
|  *
 | |
|  * Send feedback to <scottm@somanetworks.com>
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/moduleparam.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/pci.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/signal.h>	/* IRQF_SHARED */
 | |
| #include "cpci_hotplug.h"
 | |
| #include "cpcihp_zt5550.h"
 | |
| 
 | |
| #define DRIVER_VERSION	"0.2"
 | |
| #define DRIVER_AUTHOR	"Scott Murray <scottm@somanetworks.com>"
 | |
| #define DRIVER_DESC	"ZT5550 CompactPCI Hot Plug Driver"
 | |
| 
 | |
| #define MY_NAME	"cpcihp_zt5550"
 | |
| 
 | |
| #define dbg(format, arg...)					\
 | |
| 	do {							\
 | |
| 		if (debug)					\
 | |
| 			printk(KERN_DEBUG "%s: " format "\n",	\
 | |
| 				MY_NAME, ## arg);		\
 | |
| 	} while (0)
 | |
| #define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg)
 | |
| #define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg)
 | |
| #define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg)
 | |
| 
 | |
| /* local variables */
 | |
| static bool debug;
 | |
| static bool poll;
 | |
| static struct cpci_hp_controller_ops zt5550_hpc_ops;
 | |
| static struct cpci_hp_controller zt5550_hpc;
 | |
| 
 | |
| /* Primary cPCI bus bridge device */
 | |
| static struct pci_dev *bus0_dev;
 | |
| static struct pci_bus *bus0;
 | |
| 
 | |
| /* Host controller device */
 | |
| static struct pci_dev *hc_dev;
 | |
| 
 | |
| /* Host controller register addresses */
 | |
| static void __iomem *hc_registers;
 | |
| static void __iomem *csr_hc_index;
 | |
| static void __iomem *csr_hc_data;
 | |
| static void __iomem *csr_int_status;
 | |
| static void __iomem *csr_int_mask;
 | |
| 
 | |
| 
 | |
| static int zt5550_hc_config(struct pci_dev *pdev)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	/* Since we know that no boards exist with two HC chips, treat it as an error */
 | |
| 	if (hc_dev) {
 | |
| 		err("too many host controller devices?");
 | |
| 		return -EBUSY;
 | |
| 	}
 | |
| 
 | |
| 	ret = pci_enable_device(pdev);
 | |
| 	if (ret) {
 | |
| 		err("cannot enable %s\n", pci_name(pdev));
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	hc_dev = pdev;
 | |
| 	dbg("hc_dev = %p", hc_dev);
 | |
| 	dbg("pci resource start %llx", (unsigned long long)pci_resource_start(hc_dev, 1));
 | |
| 	dbg("pci resource len %llx", (unsigned long long)pci_resource_len(hc_dev, 1));
 | |
| 
 | |
| 	if (!request_mem_region(pci_resource_start(hc_dev, 1),
 | |
| 				pci_resource_len(hc_dev, 1), MY_NAME)) {
 | |
| 		err("cannot reserve MMIO region");
 | |
| 		ret = -ENOMEM;
 | |
| 		goto exit_disable_device;
 | |
| 	}
 | |
| 
 | |
| 	hc_registers =
 | |
| 	    ioremap(pci_resource_start(hc_dev, 1), pci_resource_len(hc_dev, 1));
 | |
| 	if (!hc_registers) {
 | |
| 		err("cannot remap MMIO region %llx @ %llx",
 | |
| 			(unsigned long long)pci_resource_len(hc_dev, 1),
 | |
| 			(unsigned long long)pci_resource_start(hc_dev, 1));
 | |
| 		ret = -ENODEV;
 | |
| 		goto exit_release_region;
 | |
| 	}
 | |
| 
 | |
| 	csr_hc_index = hc_registers + CSR_HCINDEX;
 | |
| 	csr_hc_data = hc_registers + CSR_HCDATA;
 | |
| 	csr_int_status = hc_registers + CSR_INTSTAT;
 | |
| 	csr_int_mask = hc_registers + CSR_INTMASK;
 | |
| 
 | |
| 	/*
 | |
| 	 * Disable host control, fault and serial interrupts
 | |
| 	 */
 | |
| 	dbg("disabling host control, fault and serial interrupts");
 | |
| 	writeb((u8) HC_INT_MASK_REG, csr_hc_index);
 | |
| 	writeb((u8) ALL_INDEXED_INTS_MASK, csr_hc_data);
 | |
| 	dbg("disabled host control, fault and serial interrupts");
 | |
| 
 | |
| 	/*
 | |
| 	 * Disable timer0, timer1 and ENUM interrupts
 | |
| 	 */
 | |
| 	dbg("disabling timer0, timer1 and ENUM interrupts");
 | |
| 	writeb((u8) ALL_DIRECT_INTS_MASK, csr_int_mask);
 | |
| 	dbg("disabled timer0, timer1 and ENUM interrupts");
 | |
| 	return 0;
 | |
| 
 | |
| exit_release_region:
 | |
| 	release_mem_region(pci_resource_start(hc_dev, 1),
 | |
| 			   pci_resource_len(hc_dev, 1));
 | |
| exit_disable_device:
 | |
| 	pci_disable_device(hc_dev);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int zt5550_hc_cleanup(void)
 | |
| {
 | |
| 	if (!hc_dev)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	iounmap(hc_registers);
 | |
| 	release_mem_region(pci_resource_start(hc_dev, 1),
 | |
| 			   pci_resource_len(hc_dev, 1));
 | |
| 	pci_disable_device(hc_dev);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int zt5550_hc_query_enum(void)
 | |
| {
 | |
| 	u8 value;
 | |
| 
 | |
| 	value = inb_p(ENUM_PORT);
 | |
| 	return ((value & ENUM_MASK) == ENUM_MASK);
 | |
| }
 | |
| 
 | |
| static int zt5550_hc_check_irq(void *dev_id)
 | |
| {
 | |
| 	int ret;
 | |
| 	u8 reg;
 | |
| 
 | |
| 	ret = 0;
 | |
| 	if (dev_id == zt5550_hpc.dev_id) {
 | |
| 		reg = readb(csr_int_status);
 | |
| 		if (reg)
 | |
| 			ret = 1;
 | |
| 	}
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int zt5550_hc_enable_irq(void)
 | |
| {
 | |
| 	u8 reg;
 | |
| 
 | |
| 	if (hc_dev == NULL)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	reg = readb(csr_int_mask);
 | |
| 	reg = reg & ~ENUM_INT_MASK;
 | |
| 	writeb(reg, csr_int_mask);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int zt5550_hc_disable_irq(void)
 | |
| {
 | |
| 	u8 reg;
 | |
| 
 | |
| 	if (hc_dev == NULL)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	reg = readb(csr_int_mask);
 | |
| 	reg = reg | ENUM_INT_MASK;
 | |
| 	writeb(reg, csr_int_mask);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int zt5550_hc_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 | |
| {
 | |
| 	int status;
 | |
| 
 | |
| 	status = zt5550_hc_config(pdev);
 | |
| 	if (status != 0)
 | |
| 		return status;
 | |
| 
 | |
| 	dbg("returned from zt5550_hc_config");
 | |
| 
 | |
| 	memset(&zt5550_hpc, 0, sizeof(struct cpci_hp_controller));
 | |
| 	zt5550_hpc_ops.query_enum = zt5550_hc_query_enum;
 | |
| 	zt5550_hpc.ops = &zt5550_hpc_ops;
 | |
| 	if (!poll) {
 | |
| 		zt5550_hpc.irq = hc_dev->irq;
 | |
| 		zt5550_hpc.irq_flags = IRQF_SHARED;
 | |
| 		zt5550_hpc.dev_id = hc_dev;
 | |
| 
 | |
| 		zt5550_hpc_ops.enable_irq = zt5550_hc_enable_irq;
 | |
| 		zt5550_hpc_ops.disable_irq = zt5550_hc_disable_irq;
 | |
| 		zt5550_hpc_ops.check_irq = zt5550_hc_check_irq;
 | |
| 	} else {
 | |
| 		info("using ENUM# polling mode");
 | |
| 	}
 | |
| 
 | |
| 	status = cpci_hp_register_controller(&zt5550_hpc);
 | |
| 	if (status != 0) {
 | |
| 		err("could not register cPCI hotplug controller");
 | |
| 		goto init_hc_error;
 | |
| 	}
 | |
| 	dbg("registered controller");
 | |
| 
 | |
| 	/* Look for first device matching cPCI bus's bridge vendor and device IDs */
 | |
| 	bus0_dev = pci_get_device(PCI_VENDOR_ID_DEC,
 | |
| 				  PCI_DEVICE_ID_DEC_21154, NULL);
 | |
| 	if (!bus0_dev) {
 | |
| 		status = -ENODEV;
 | |
| 		goto init_register_error;
 | |
| 	}
 | |
| 	bus0 = bus0_dev->subordinate;
 | |
| 	pci_dev_put(bus0_dev);
 | |
| 
 | |
| 	status = cpci_hp_register_bus(bus0, 0x0a, 0x0f);
 | |
| 	if (status != 0) {
 | |
| 		err("could not register cPCI hotplug bus");
 | |
| 		goto init_register_error;
 | |
| 	}
 | |
| 	dbg("registered bus");
 | |
| 
 | |
| 	status = cpci_hp_start();
 | |
| 	if (status != 0) {
 | |
| 		err("could not started cPCI hotplug system");
 | |
| 		cpci_hp_unregister_bus(bus0);
 | |
| 		goto init_register_error;
 | |
| 	}
 | |
| 	dbg("started cpci hp system");
 | |
| 
 | |
| 	return 0;
 | |
| init_register_error:
 | |
| 	cpci_hp_unregister_controller(&zt5550_hpc);
 | |
| init_hc_error:
 | |
| 	err("status = %d", status);
 | |
| 	zt5550_hc_cleanup();
 | |
| 	return status;
 | |
| 
 | |
| }
 | |
| 
 | |
| static void zt5550_hc_remove_one(struct pci_dev *pdev)
 | |
| {
 | |
| 	cpci_hp_stop();
 | |
| 	cpci_hp_unregister_bus(bus0);
 | |
| 	cpci_hp_unregister_controller(&zt5550_hpc);
 | |
| 	zt5550_hc_cleanup();
 | |
| }
 | |
| 
 | |
| 
 | |
| static const struct pci_device_id zt5550_hc_pci_tbl[] = {
 | |
| 	{ PCI_VENDOR_ID_ZIATECH, PCI_DEVICE_ID_ZIATECH_5550_HC, PCI_ANY_ID, PCI_ANY_ID, },
 | |
| 	{ 0, }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(pci, zt5550_hc_pci_tbl);
 | |
| 
 | |
| static struct pci_driver zt5550_hc_driver = {
 | |
| 	.name		= "zt5550_hc",
 | |
| 	.id_table	= zt5550_hc_pci_tbl,
 | |
| 	.probe		= zt5550_hc_init_one,
 | |
| 	.remove		= zt5550_hc_remove_one,
 | |
| };
 | |
| 
 | |
| static int __init zt5550_init(void)
 | |
| {
 | |
| 	struct resource *r;
 | |
| 	int rc;
 | |
| 
 | |
| 	info(DRIVER_DESC " version: " DRIVER_VERSION);
 | |
| 	r = request_region(ENUM_PORT, 1, "#ENUM hotswap signal register");
 | |
| 	if (!r)
 | |
| 		return -EBUSY;
 | |
| 
 | |
| 	rc = pci_register_driver(&zt5550_hc_driver);
 | |
| 	if (rc < 0)
 | |
| 		release_region(ENUM_PORT, 1);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static void __exit
 | |
| zt5550_exit(void)
 | |
| {
 | |
| 	pci_unregister_driver(&zt5550_hc_driver);
 | |
| 	release_region(ENUM_PORT, 1);
 | |
| }
 | |
| 
 | |
| module_init(zt5550_init);
 | |
| module_exit(zt5550_exit);
 | |
| 
 | |
| MODULE_AUTHOR(DRIVER_AUTHOR);
 | |
| MODULE_DESCRIPTION(DRIVER_DESC);
 | |
| MODULE_LICENSE("GPL");
 | |
| module_param(debug, bool, 0644);
 | |
| MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
 | |
| module_param(poll, bool, 0644);
 | |
| MODULE_PARM_DESC(poll, "#ENUM polling mode enabled or not");
 |