565 lines
		
	
	
		
			16 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			565 lines
		
	
	
		
			16 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0+
 | |
| //
 | |
| // max14577.c - mfd core driver for the Maxim 14577/77836
 | |
| //
 | |
| // Copyright (C) 2014 Samsung Electronics
 | |
| // Chanwoo Choi <cw00.choi@samsung.com>
 | |
| // Krzysztof Kozlowski <krzk@kernel.org>
 | |
| //
 | |
| // This driver is based on max8997.c
 | |
| 
 | |
| #include <linux/err.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/of_device.h>
 | |
| #include <linux/mfd/core.h>
 | |
| #include <linux/mfd/max14577.h>
 | |
| #include <linux/mfd/max14577-private.h>
 | |
| 
 | |
| /*
 | |
|  * Table of valid charger currents for different Maxim chipsets.
 | |
|  * It is placed here because it is used by both charger and regulator driver.
 | |
|  */
 | |
| const struct maxim_charger_current maxim_charger_currents[] = {
 | |
| 	[MAXIM_DEVICE_TYPE_UNKNOWN] = { 0, 0, 0, 0 },
 | |
| 	[MAXIM_DEVICE_TYPE_MAX14577] = {
 | |
| 		.min		= MAX14577_CHARGER_CURRENT_LIMIT_MIN,
 | |
| 		.high_start	= MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START,
 | |
| 		.high_step	= MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP,
 | |
| 		.max		= MAX14577_CHARGER_CURRENT_LIMIT_MAX,
 | |
| 	},
 | |
| 	[MAXIM_DEVICE_TYPE_MAX77836] = {
 | |
| 		.min		= MAX77836_CHARGER_CURRENT_LIMIT_MIN,
 | |
| 		.high_start	= MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START,
 | |
| 		.high_step	= MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP,
 | |
| 		.max		= MAX77836_CHARGER_CURRENT_LIMIT_MAX,
 | |
| 	},
 | |
| };
 | |
| EXPORT_SYMBOL_GPL(maxim_charger_currents);
 | |
| 
 | |
| /*
 | |
|  * maxim_charger_calc_reg_current - Calculate register value for current
 | |
|  * @limits:	constraints for charger, matching the MBCICHWRC register
 | |
|  * @min_ua:	minimal requested current, micro Amps
 | |
|  * @max_ua:	maximum requested current, micro Amps
 | |
|  * @dst:	destination to store calculated register value
 | |
|  *
 | |
|  * Calculates the value of MBCICHWRC (Fast Battery Charge Current) register
 | |
|  * for given current and stores it under pointed 'dst'. The stored value
 | |
|  * combines low bit (MBCICHWRCL) and high bits (MBCICHWRCH). It is also
 | |
|  * properly shifted.
 | |
|  *
 | |
|  * The calculated register value matches the current which:
 | |
|  *  - is always between <limits.min, limits.max>;
 | |
|  *  - is always less or equal to max_ua;
 | |
|  *  - is the highest possible value;
 | |
|  *  - may be lower than min_ua.
 | |
|  *
 | |
|  * On success returns 0. On error returns -EINVAL (requested min/max current
 | |
|  * is outside of given charger limits) and 'dst' is not set.
 | |
|  */
 | |
| int maxim_charger_calc_reg_current(const struct maxim_charger_current *limits,
 | |
| 		unsigned int min_ua, unsigned int max_ua, u8 *dst)
 | |
| {
 | |
| 	unsigned int current_bits;
 | |
| 
 | |
| 	if (min_ua > max_ua)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (min_ua > limits->max || max_ua < limits->min)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	if (max_ua < limits->high_start) {
 | |
| 		/*
 | |
| 		 * Less than high_start, so set the minimal current
 | |
| 		 * (turn Low Bit off, 0 as high bits).
 | |
| 		 */
 | |
| 		*dst = 0x0;
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	/* max_ua is in range: <high_start, infinite>, cut it to limits.max */
 | |
| 	max_ua = min(limits->max, max_ua);
 | |
| 	max_ua -= limits->high_start;
 | |
| 	/*
 | |
| 	 * There is no risk of overflow 'max_ua' here because:
 | |
| 	 *  - max_ua >= limits.high_start
 | |
| 	 *  - BUILD_BUG checks that 'limits' are: max >= high_start + high_step
 | |
| 	 */
 | |
| 	current_bits = max_ua / limits->high_step;
 | |
| 
 | |
| 	/* Turn Low Bit on (use range <limits.high_start, limits.max>) ... */
 | |
| 	*dst = 0x1 << CHGCTRL4_MBCICHWRCL_SHIFT;
 | |
| 	/* and set proper High Bits */
 | |
| 	*dst |= current_bits << CHGCTRL4_MBCICHWRCH_SHIFT;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(maxim_charger_calc_reg_current);
 | |
| 
 | |
| static const struct mfd_cell max14577_devs[] = {
 | |
| 	{
 | |
| 		.name = "max14577-muic",
 | |
| 		.of_compatible = "maxim,max14577-muic",
 | |
| 	},
 | |
| 	{
 | |
| 		.name = "max14577-regulator",
 | |
| 		.of_compatible = "maxim,max14577-regulator",
 | |
| 	},
 | |
| 	{
 | |
| 		.name = "max14577-charger",
 | |
| 		.of_compatible = "maxim,max14577-charger",
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static const struct mfd_cell max77836_devs[] = {
 | |
| 	{
 | |
| 		.name = "max77836-muic",
 | |
| 		.of_compatible = "maxim,max77836-muic",
 | |
| 	},
 | |
| 	{
 | |
| 		.name = "max77836-regulator",
 | |
| 		.of_compatible = "maxim,max77836-regulator",
 | |
| 	},
 | |
| 	{
 | |
| 		.name = "max77836-charger",
 | |
| 		.of_compatible = "maxim,max77836-charger",
 | |
| 	},
 | |
| 	{
 | |
| 		.name = "max77836-battery",
 | |
| 		.of_compatible = "maxim,max77836-battery",
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static const struct of_device_id max14577_dt_match[] = {
 | |
| 	{
 | |
| 		.compatible = "maxim,max14577",
 | |
| 		.data = (void *)MAXIM_DEVICE_TYPE_MAX14577,
 | |
| 	},
 | |
| 	{
 | |
| 		.compatible = "maxim,max77836",
 | |
| 		.data = (void *)MAXIM_DEVICE_TYPE_MAX77836,
 | |
| 	},
 | |
| 	{},
 | |
| };
 | |
| 
 | |
| static bool max14577_muic_volatile_reg(struct device *dev, unsigned int reg)
 | |
| {
 | |
| 	switch (reg) {
 | |
| 	case MAX14577_REG_INT1 ... MAX14577_REG_STATUS3:
 | |
| 		return true;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| static bool max77836_muic_volatile_reg(struct device *dev, unsigned int reg)
 | |
| {
 | |
| 	/* Any max14577 volatile registers are also max77836 volatile. */
 | |
| 	if (max14577_muic_volatile_reg(dev, reg))
 | |
| 		return true;
 | |
| 
 | |
| 	switch (reg) {
 | |
| 	case MAX77836_FG_REG_VCELL_MSB ... MAX77836_FG_REG_SOC_LSB:
 | |
| 	case MAX77836_FG_REG_CRATE_MSB ... MAX77836_FG_REG_CRATE_LSB:
 | |
| 	case MAX77836_FG_REG_STATUS_H ... MAX77836_FG_REG_STATUS_L:
 | |
| 	case MAX77836_PMIC_REG_INTSRC:
 | |
| 	case MAX77836_PMIC_REG_TOPSYS_INT:
 | |
| 	case MAX77836_PMIC_REG_TOPSYS_STAT:
 | |
| 		return true;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 	return false;
 | |
| }
 | |
| 
 | |
| static const struct regmap_config max14577_muic_regmap_config = {
 | |
| 	.reg_bits	= 8,
 | |
| 	.val_bits	= 8,
 | |
| 	.volatile_reg	= max14577_muic_volatile_reg,
 | |
| 	.max_register	= MAX14577_REG_END,
 | |
| };
 | |
| 
 | |
| static const struct regmap_config max77836_pmic_regmap_config = {
 | |
| 	.reg_bits	= 8,
 | |
| 	.val_bits	= 8,
 | |
| 	.volatile_reg	= max77836_muic_volatile_reg,
 | |
| 	.max_register	= MAX77836_PMIC_REG_END,
 | |
| };
 | |
| 
 | |
| static const struct regmap_irq max14577_irqs[] = {
 | |
| 	/* INT1 interrupts */
 | |
| 	{ .reg_offset = 0, .mask = MAX14577_INT1_ADC_MASK, },
 | |
| 	{ .reg_offset = 0, .mask = MAX14577_INT1_ADCLOW_MASK, },
 | |
| 	{ .reg_offset = 0, .mask = MAX14577_INT1_ADCERR_MASK, },
 | |
| 	/* INT2 interrupts */
 | |
| 	{ .reg_offset = 1, .mask = MAX14577_INT2_CHGTYP_MASK, },
 | |
| 	{ .reg_offset = 1, .mask = MAX14577_INT2_CHGDETRUN_MASK, },
 | |
| 	{ .reg_offset = 1, .mask = MAX14577_INT2_DCDTMR_MASK, },
 | |
| 	{ .reg_offset = 1, .mask = MAX14577_INT2_DBCHG_MASK, },
 | |
| 	{ .reg_offset = 1, .mask = MAX14577_INT2_VBVOLT_MASK, },
 | |
| 	/* INT3 interrupts */
 | |
| 	{ .reg_offset = 2, .mask = MAX14577_INT3_EOC_MASK, },
 | |
| 	{ .reg_offset = 2, .mask = MAX14577_INT3_CGMBC_MASK, },
 | |
| 	{ .reg_offset = 2, .mask = MAX14577_INT3_OVP_MASK, },
 | |
| 	{ .reg_offset = 2, .mask = MAX14577_INT3_MBCCHGERR_MASK, },
 | |
| };
 | |
| 
 | |
| static const struct regmap_irq_chip max14577_irq_chip = {
 | |
| 	.name			= "max14577",
 | |
| 	.status_base		= MAX14577_REG_INT1,
 | |
| 	.mask_base		= MAX14577_REG_INTMASK1,
 | |
| 	.mask_invert		= true,
 | |
| 	.num_regs		= 3,
 | |
| 	.irqs			= max14577_irqs,
 | |
| 	.num_irqs		= ARRAY_SIZE(max14577_irqs),
 | |
| };
 | |
| 
 | |
| static const struct regmap_irq max77836_muic_irqs[] = {
 | |
| 	/* INT1 interrupts */
 | |
| 	{ .reg_offset = 0, .mask = MAX14577_INT1_ADC_MASK, },
 | |
| 	{ .reg_offset = 0, .mask = MAX14577_INT1_ADCLOW_MASK, },
 | |
| 	{ .reg_offset = 0, .mask = MAX14577_INT1_ADCERR_MASK, },
 | |
| 	{ .reg_offset = 0, .mask = MAX77836_INT1_ADC1K_MASK, },
 | |
| 	/* INT2 interrupts */
 | |
| 	{ .reg_offset = 1, .mask = MAX14577_INT2_CHGTYP_MASK, },
 | |
| 	{ .reg_offset = 1, .mask = MAX14577_INT2_CHGDETRUN_MASK, },
 | |
| 	{ .reg_offset = 1, .mask = MAX14577_INT2_DCDTMR_MASK, },
 | |
| 	{ .reg_offset = 1, .mask = MAX14577_INT2_DBCHG_MASK, },
 | |
| 	{ .reg_offset = 1, .mask = MAX14577_INT2_VBVOLT_MASK, },
 | |
| 	{ .reg_offset = 1, .mask = MAX77836_INT2_VIDRM_MASK, },
 | |
| 	/* INT3 interrupts */
 | |
| 	{ .reg_offset = 2, .mask = MAX14577_INT3_EOC_MASK, },
 | |
| 	{ .reg_offset = 2, .mask = MAX14577_INT3_CGMBC_MASK, },
 | |
| 	{ .reg_offset = 2, .mask = MAX14577_INT3_OVP_MASK, },
 | |
| 	{ .reg_offset = 2, .mask = MAX14577_INT3_MBCCHGERR_MASK, },
 | |
| };
 | |
| 
 | |
| static const struct regmap_irq_chip max77836_muic_irq_chip = {
 | |
| 	.name			= "max77836-muic",
 | |
| 	.status_base		= MAX14577_REG_INT1,
 | |
| 	.mask_base		= MAX14577_REG_INTMASK1,
 | |
| 	.mask_invert		= true,
 | |
| 	.num_regs		= 3,
 | |
| 	.irqs			= max77836_muic_irqs,
 | |
| 	.num_irqs		= ARRAY_SIZE(max77836_muic_irqs),
 | |
| };
 | |
| 
 | |
| static const struct regmap_irq max77836_pmic_irqs[] = {
 | |
| 	{ .reg_offset = 0, .mask = MAX77836_TOPSYS_INT_T120C_MASK, },
 | |
| 	{ .reg_offset = 0, .mask = MAX77836_TOPSYS_INT_T140C_MASK, },
 | |
| };
 | |
| 
 | |
| static const struct regmap_irq_chip max77836_pmic_irq_chip = {
 | |
| 	.name			= "max77836-pmic",
 | |
| 	.status_base		= MAX77836_PMIC_REG_TOPSYS_INT,
 | |
| 	.mask_base		= MAX77836_PMIC_REG_TOPSYS_INT_MASK,
 | |
| 	.mask_invert		= false,
 | |
| 	.num_regs		= 1,
 | |
| 	.irqs			= max77836_pmic_irqs,
 | |
| 	.num_irqs		= ARRAY_SIZE(max77836_pmic_irqs),
 | |
| };
 | |
| 
 | |
| static void max14577_print_dev_type(struct max14577 *max14577)
 | |
| {
 | |
| 	u8 reg_data, vendor_id, device_id;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = max14577_read_reg(max14577->regmap, MAX14577_REG_DEVICEID,
 | |
| 			®_data);
 | |
| 	if (ret) {
 | |
| 		dev_err(max14577->dev,
 | |
| 			"Failed to read DEVICEID register: %d\n", ret);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	vendor_id = ((reg_data & DEVID_VENDORID_MASK) >>
 | |
| 				DEVID_VENDORID_SHIFT);
 | |
| 	device_id = ((reg_data & DEVID_DEVICEID_MASK) >>
 | |
| 				DEVID_DEVICEID_SHIFT);
 | |
| 
 | |
| 	dev_info(max14577->dev, "Device type: %u (ID: 0x%x, vendor: 0x%x)\n",
 | |
| 			max14577->dev_type, device_id, vendor_id);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Max77836 specific initialization code for driver probe.
 | |
|  * Adds new I2C dummy device, regmap and regmap IRQ chip.
 | |
|  * Unmasks Interrupt Source register.
 | |
|  *
 | |
|  * On success returns 0.
 | |
|  * On failure returns errno and reverts any changes done so far (e.g. remove
 | |
|  * I2C dummy device), except masking the INT SRC register.
 | |
|  */
 | |
| static int max77836_init(struct max14577 *max14577)
 | |
| {
 | |
| 	int ret;
 | |
| 	u8 intsrc_mask;
 | |
| 
 | |
| 	max14577->i2c_pmic = i2c_new_dummy_device(max14577->i2c->adapter,
 | |
| 			I2C_ADDR_PMIC);
 | |
| 	if (IS_ERR(max14577->i2c_pmic)) {
 | |
| 		dev_err(max14577->dev, "Failed to register PMIC I2C device\n");
 | |
| 		return PTR_ERR(max14577->i2c_pmic);
 | |
| 	}
 | |
| 	i2c_set_clientdata(max14577->i2c_pmic, max14577);
 | |
| 
 | |
| 	max14577->regmap_pmic = devm_regmap_init_i2c(max14577->i2c_pmic,
 | |
| 			&max77836_pmic_regmap_config);
 | |
| 	if (IS_ERR(max14577->regmap_pmic)) {
 | |
| 		ret = PTR_ERR(max14577->regmap_pmic);
 | |
| 		dev_err(max14577->dev, "Failed to allocate PMIC register map: %d\n",
 | |
| 				ret);
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	/* Un-mask MAX77836 Interrupt Source register */
 | |
| 	ret = max14577_read_reg(max14577->regmap_pmic,
 | |
| 			MAX77836_PMIC_REG_INTSRC_MASK, &intsrc_mask);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(max14577->dev, "Failed to read PMIC register\n");
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	intsrc_mask &= ~(MAX77836_INTSRC_MASK_TOP_INT_MASK);
 | |
| 	intsrc_mask &= ~(MAX77836_INTSRC_MASK_MUIC_CHG_INT_MASK);
 | |
| 	ret = max14577_write_reg(max14577->regmap_pmic,
 | |
| 			MAX77836_PMIC_REG_INTSRC_MASK, intsrc_mask);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(max14577->dev, "Failed to write PMIC register\n");
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	ret = regmap_add_irq_chip(max14577->regmap_pmic, max14577->irq,
 | |
| 			IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED,
 | |
| 			0, &max77836_pmic_irq_chip,
 | |
| 			&max14577->irq_data_pmic);
 | |
| 	if (ret != 0) {
 | |
| 		dev_err(max14577->dev, "Failed to request PMIC IRQ %d: %d\n",
 | |
| 				max14577->irq, ret);
 | |
| 		goto err;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err:
 | |
| 	i2c_unregister_device(max14577->i2c_pmic);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Max77836 specific de-initialization code for driver remove.
 | |
|  */
 | |
| static void max77836_remove(struct max14577 *max14577)
 | |
| {
 | |
| 	regmap_del_irq_chip(max14577->irq, max14577->irq_data_pmic);
 | |
| 	i2c_unregister_device(max14577->i2c_pmic);
 | |
| }
 | |
| 
 | |
| static int max14577_i2c_probe(struct i2c_client *i2c,
 | |
| 			      const struct i2c_device_id *id)
 | |
| {
 | |
| 	struct max14577 *max14577;
 | |
| 	struct max14577_platform_data *pdata = dev_get_platdata(&i2c->dev);
 | |
| 	struct device_node *np = i2c->dev.of_node;
 | |
| 	int ret = 0;
 | |
| 	const struct regmap_irq_chip *irq_chip;
 | |
| 	const struct mfd_cell *mfd_devs;
 | |
| 	unsigned int mfd_devs_size;
 | |
| 	int irq_flags;
 | |
| 
 | |
| 	if (np) {
 | |
| 		pdata = devm_kzalloc(&i2c->dev, sizeof(*pdata), GFP_KERNEL);
 | |
| 		if (!pdata)
 | |
| 			return -ENOMEM;
 | |
| 		i2c->dev.platform_data = pdata;
 | |
| 	}
 | |
| 
 | |
| 	if (!pdata) {
 | |
| 		dev_err(&i2c->dev, "No platform data found.\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	max14577 = devm_kzalloc(&i2c->dev, sizeof(*max14577), GFP_KERNEL);
 | |
| 	if (!max14577)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	i2c_set_clientdata(i2c, max14577);
 | |
| 	max14577->dev = &i2c->dev;
 | |
| 	max14577->i2c = i2c;
 | |
| 	max14577->irq = i2c->irq;
 | |
| 
 | |
| 	max14577->regmap = devm_regmap_init_i2c(i2c,
 | |
| 			&max14577_muic_regmap_config);
 | |
| 	if (IS_ERR(max14577->regmap)) {
 | |
| 		ret = PTR_ERR(max14577->regmap);
 | |
| 		dev_err(max14577->dev, "Failed to allocate register map: %d\n",
 | |
| 				ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	if (np) {
 | |
| 		const struct of_device_id *of_id;
 | |
| 
 | |
| 		of_id = of_match_device(max14577_dt_match, &i2c->dev);
 | |
| 		if (of_id)
 | |
| 			max14577->dev_type =
 | |
| 				(enum maxim_device_type)of_id->data;
 | |
| 	} else {
 | |
| 		max14577->dev_type = id->driver_data;
 | |
| 	}
 | |
| 
 | |
| 	max14577_print_dev_type(max14577);
 | |
| 
 | |
| 	switch (max14577->dev_type) {
 | |
| 	case MAXIM_DEVICE_TYPE_MAX77836:
 | |
| 		irq_chip = &max77836_muic_irq_chip;
 | |
| 		mfd_devs = max77836_devs;
 | |
| 		mfd_devs_size = ARRAY_SIZE(max77836_devs);
 | |
| 		irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT | IRQF_SHARED;
 | |
| 		break;
 | |
| 	case MAXIM_DEVICE_TYPE_MAX14577:
 | |
| 	default:
 | |
| 		irq_chip = &max14577_irq_chip;
 | |
| 		mfd_devs = max14577_devs;
 | |
| 		mfd_devs_size = ARRAY_SIZE(max14577_devs);
 | |
| 		irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	ret = regmap_add_irq_chip(max14577->regmap, max14577->irq,
 | |
| 				  irq_flags, 0, irq_chip,
 | |
| 				  &max14577->irq_data);
 | |
| 	if (ret != 0) {
 | |
| 		dev_err(&i2c->dev, "Failed to request IRQ %d: %d\n",
 | |
| 				max14577->irq, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	/* Max77836 specific initialization code (additional regmap) */
 | |
| 	if (max14577->dev_type == MAXIM_DEVICE_TYPE_MAX77836) {
 | |
| 		ret = max77836_init(max14577);
 | |
| 		if (ret < 0)
 | |
| 			goto err_max77836;
 | |
| 	}
 | |
| 
 | |
| 	ret = mfd_add_devices(max14577->dev, -1, mfd_devs,
 | |
| 			mfd_devs_size, NULL, 0, NULL);
 | |
| 	if (ret < 0)
 | |
| 		goto err_mfd;
 | |
| 
 | |
| 	device_init_wakeup(max14577->dev, 1);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_mfd:
 | |
| 	if (max14577->dev_type == MAXIM_DEVICE_TYPE_MAX77836)
 | |
| 		max77836_remove(max14577);
 | |
| err_max77836:
 | |
| 	regmap_del_irq_chip(max14577->irq, max14577->irq_data);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int max14577_i2c_remove(struct i2c_client *i2c)
 | |
| {
 | |
| 	struct max14577 *max14577 = i2c_get_clientdata(i2c);
 | |
| 
 | |
| 	mfd_remove_devices(max14577->dev);
 | |
| 	regmap_del_irq_chip(max14577->irq, max14577->irq_data);
 | |
| 	if (max14577->dev_type == MAXIM_DEVICE_TYPE_MAX77836)
 | |
| 		max77836_remove(max14577);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id max14577_i2c_id[] = {
 | |
| 	{ "max14577", MAXIM_DEVICE_TYPE_MAX14577, },
 | |
| 	{ "max77836", MAXIM_DEVICE_TYPE_MAX77836, },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, max14577_i2c_id);
 | |
| 
 | |
| #ifdef CONFIG_PM_SLEEP
 | |
| static int max14577_suspend(struct device *dev)
 | |
| {
 | |
| 	struct i2c_client *i2c = to_i2c_client(dev);
 | |
| 	struct max14577 *max14577 = i2c_get_clientdata(i2c);
 | |
| 
 | |
| 	if (device_may_wakeup(dev))
 | |
| 		enable_irq_wake(max14577->irq);
 | |
| 	/*
 | |
| 	 * MUIC IRQ must be disabled during suspend because if it happens
 | |
| 	 * while suspended it will be handled before resuming I2C.
 | |
| 	 *
 | |
| 	 * When device is woken up from suspend (e.g. by ADC change),
 | |
| 	 * an interrupt occurs before resuming I2C bus controller.
 | |
| 	 * Interrupt handler tries to read registers but this read
 | |
| 	 * will fail because I2C is still suspended.
 | |
| 	 */
 | |
| 	disable_irq(max14577->irq);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int max14577_resume(struct device *dev)
 | |
| {
 | |
| 	struct i2c_client *i2c = to_i2c_client(dev);
 | |
| 	struct max14577 *max14577 = i2c_get_clientdata(i2c);
 | |
| 
 | |
| 	if (device_may_wakeup(dev))
 | |
| 		disable_irq_wake(max14577->irq);
 | |
| 	enable_irq(max14577->irq);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif /* CONFIG_PM_SLEEP */
 | |
| 
 | |
| static SIMPLE_DEV_PM_OPS(max14577_pm, max14577_suspend, max14577_resume);
 | |
| 
 | |
| static struct i2c_driver max14577_i2c_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "max14577",
 | |
| 		.pm = &max14577_pm,
 | |
| 		.of_match_table = max14577_dt_match,
 | |
| 	},
 | |
| 	.probe = max14577_i2c_probe,
 | |
| 	.remove = max14577_i2c_remove,
 | |
| 	.id_table = max14577_i2c_id,
 | |
| };
 | |
| 
 | |
| static int __init max14577_i2c_init(void)
 | |
| {
 | |
| 	BUILD_BUG_ON(ARRAY_SIZE(max14577_i2c_id) != MAXIM_DEVICE_TYPE_NUM);
 | |
| 	BUILD_BUG_ON(ARRAY_SIZE(max14577_dt_match) != MAXIM_DEVICE_TYPE_NUM);
 | |
| 
 | |
| 	/* Valid charger current values must be provided for each chipset */
 | |
| 	BUILD_BUG_ON(ARRAY_SIZE(maxim_charger_currents) != MAXIM_DEVICE_TYPE_NUM);
 | |
| 
 | |
| 	/* Check for valid values for charger */
 | |
| 	BUILD_BUG_ON(MAX14577_CHARGER_CURRENT_LIMIT_HIGH_START +
 | |
| 			MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP * 0xf !=
 | |
| 			MAX14577_CHARGER_CURRENT_LIMIT_MAX);
 | |
| 	BUILD_BUG_ON(MAX14577_CHARGER_CURRENT_LIMIT_HIGH_STEP == 0);
 | |
| 
 | |
| 	BUILD_BUG_ON(MAX77836_CHARGER_CURRENT_LIMIT_HIGH_START +
 | |
| 			MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP * 0xf !=
 | |
| 			MAX77836_CHARGER_CURRENT_LIMIT_MAX);
 | |
| 	BUILD_BUG_ON(MAX77836_CHARGER_CURRENT_LIMIT_HIGH_STEP == 0);
 | |
| 
 | |
| 	return i2c_add_driver(&max14577_i2c_driver);
 | |
| }
 | |
| module_init(max14577_i2c_init);
 | |
| 
 | |
| static void __exit max14577_i2c_exit(void)
 | |
| {
 | |
| 	i2c_del_driver(&max14577_i2c_driver);
 | |
| }
 | |
| module_exit(max14577_i2c_exit);
 | |
| 
 | |
| MODULE_AUTHOR("Chanwoo Choi <cw00.choi@samsung.com>, Krzysztof Kozlowski <krzk@kernel.org>");
 | |
| MODULE_DESCRIPTION("Maxim 14577/77836 multi-function core driver");
 | |
| MODULE_LICENSE("GPL");
 |