714 lines
		
	
	
		
			16 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			714 lines
		
	
	
		
			16 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * IIO driver for the light sensor ISL29028.
 | |
|  * ISL29028 is Concurrent Ambient Light and Proximity Sensor
 | |
|  *
 | |
|  * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
 | |
|  * Copyright (c) 2016-2017 Brian Masney <masneyb@onstation.org>
 | |
|  *
 | |
|  * Datasheets:
 | |
|  *  - http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29028.pdf
 | |
|  *  - http://www.intersil.com/content/dam/Intersil/documents/isl2/isl29030.pdf
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/iio/iio.h>
 | |
| #include <linux/iio/sysfs.h>
 | |
| #include <linux/pm_runtime.h>
 | |
| 
 | |
| #define ISL29028_CONV_TIME_MS			100
 | |
| 
 | |
| #define ISL29028_REG_CONFIGURE			0x01
 | |
| 
 | |
| #define ISL29028_CONF_ALS_IR_MODE_ALS		0
 | |
| #define ISL29028_CONF_ALS_IR_MODE_IR		BIT(0)
 | |
| #define ISL29028_CONF_ALS_IR_MODE_MASK		BIT(0)
 | |
| 
 | |
| #define ISL29028_CONF_ALS_RANGE_LOW_LUX		0
 | |
| #define ISL29028_CONF_ALS_RANGE_HIGH_LUX	BIT(1)
 | |
| #define ISL29028_CONF_ALS_RANGE_MASK		BIT(1)
 | |
| 
 | |
| #define ISL29028_CONF_ALS_DIS			0
 | |
| #define ISL29028_CONF_ALS_EN			BIT(2)
 | |
| #define ISL29028_CONF_ALS_EN_MASK		BIT(2)
 | |
| 
 | |
| #define ISL29028_CONF_PROX_SLP_SH		4
 | |
| #define ISL29028_CONF_PROX_SLP_MASK		(7 << ISL29028_CONF_PROX_SLP_SH)
 | |
| 
 | |
| #define ISL29028_CONF_PROX_EN			BIT(7)
 | |
| #define ISL29028_CONF_PROX_EN_MASK		BIT(7)
 | |
| 
 | |
| #define ISL29028_REG_INTERRUPT			0x02
 | |
| 
 | |
| #define ISL29028_REG_PROX_DATA			0x08
 | |
| #define ISL29028_REG_ALSIR_L			0x09
 | |
| #define ISL29028_REG_ALSIR_U			0x0A
 | |
| 
 | |
| #define ISL29028_REG_TEST1_MODE			0x0E
 | |
| #define ISL29028_REG_TEST2_MODE			0x0F
 | |
| 
 | |
| #define ISL29028_NUM_REGS			(ISL29028_REG_TEST2_MODE + 1)
 | |
| 
 | |
| #define ISL29028_POWER_OFF_DELAY_MS		2000
 | |
| 
 | |
| struct isl29028_prox_data {
 | |
| 	int sampling_int;
 | |
| 	int sampling_fract;
 | |
| 	int sleep_time;
 | |
| };
 | |
| 
 | |
| static const struct isl29028_prox_data isl29028_prox_data[] = {
 | |
| 	{   1, 250000, 800 },
 | |
| 	{   2, 500000, 400 },
 | |
| 	{   5,      0, 200 },
 | |
| 	{  10,      0, 100 },
 | |
| 	{  13, 300000,  75 },
 | |
| 	{  20,      0,  50 },
 | |
| 	{  80,      0,  13 }, /*
 | |
| 			       * Note: Data sheet lists 12.5 ms sleep time.
 | |
| 			       * Round up a half millisecond for msleep().
 | |
| 			       */
 | |
| 	{ 100,  0,   0 }
 | |
| };
 | |
| 
 | |
| enum isl29028_als_ir_mode {
 | |
| 	ISL29028_MODE_NONE = 0,
 | |
| 	ISL29028_MODE_ALS,
 | |
| 	ISL29028_MODE_IR,
 | |
| };
 | |
| 
 | |
| struct isl29028_chip {
 | |
| 	struct mutex			lock;
 | |
| 	struct regmap			*regmap;
 | |
| 	int				prox_sampling_int;
 | |
| 	int				prox_sampling_frac;
 | |
| 	bool				enable_prox;
 | |
| 	int				lux_scale;
 | |
| 	enum isl29028_als_ir_mode	als_ir_mode;
 | |
| };
 | |
| 
 | |
| static int isl29028_find_prox_sleep_index(int sampling_int, int sampling_fract)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(isl29028_prox_data); ++i) {
 | |
| 		if (isl29028_prox_data[i].sampling_int == sampling_int &&
 | |
| 		    isl29028_prox_data[i].sampling_fract == sampling_fract)
 | |
| 			return i;
 | |
| 	}
 | |
| 
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
 | |
| 					int sampling_int, int sampling_fract)
 | |
| {
 | |
| 	struct device *dev = regmap_get_device(chip->regmap);
 | |
| 	int sleep_index, ret;
 | |
| 
 | |
| 	sleep_index = isl29028_find_prox_sleep_index(sampling_int,
 | |
| 						     sampling_fract);
 | |
| 	if (sleep_index < 0)
 | |
| 		return sleep_index;
 | |
| 
 | |
| 	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
 | |
| 				 ISL29028_CONF_PROX_SLP_MASK,
 | |
| 				 sleep_index << ISL29028_CONF_PROX_SLP_SH);
 | |
| 
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev, "%s(): Error %d setting the proximity sampling\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	chip->prox_sampling_int = sampling_int;
 | |
| 	chip->prox_sampling_frac = sampling_fract;
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int isl29028_enable_proximity(struct isl29028_chip *chip)
 | |
| {
 | |
| 	int prox_index, ret;
 | |
| 
 | |
| 	ret = isl29028_set_proxim_sampling(chip, chip->prox_sampling_int,
 | |
| 					   chip->prox_sampling_frac);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
 | |
| 				 ISL29028_CONF_PROX_EN_MASK,
 | |
| 				 ISL29028_CONF_PROX_EN);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Wait for conversion to be complete for first sample */
 | |
| 	prox_index = isl29028_find_prox_sleep_index(chip->prox_sampling_int,
 | |
| 						    chip->prox_sampling_frac);
 | |
| 	if (prox_index < 0)
 | |
| 		return prox_index;
 | |
| 
 | |
| 	msleep(isl29028_prox_data[prox_index].sleep_time);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale)
 | |
| {
 | |
| 	struct device *dev = regmap_get_device(chip->regmap);
 | |
| 	int val = (lux_scale == 2000) ? ISL29028_CONF_ALS_RANGE_HIGH_LUX :
 | |
| 					ISL29028_CONF_ALS_RANGE_LOW_LUX;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
 | |
| 				 ISL29028_CONF_ALS_RANGE_MASK, val);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev, "%s(): Error %d setting the ALS scale\n", __func__,
 | |
| 			ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	chip->lux_scale = lux_scale;
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
 | |
| 				    enum isl29028_als_ir_mode mode)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	if (chip->als_ir_mode == mode)
 | |
| 		return 0;
 | |
| 
 | |
| 	ret = isl29028_set_als_scale(chip, chip->lux_scale);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	switch (mode) {
 | |
| 	case ISL29028_MODE_ALS:
 | |
| 		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
 | |
| 					 ISL29028_CONF_ALS_IR_MODE_MASK,
 | |
| 					 ISL29028_CONF_ALS_IR_MODE_ALS);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 
 | |
| 		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
 | |
| 					 ISL29028_CONF_ALS_RANGE_MASK,
 | |
| 					 ISL29028_CONF_ALS_RANGE_HIGH_LUX);
 | |
| 		break;
 | |
| 	case ISL29028_MODE_IR:
 | |
| 		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
 | |
| 					 ISL29028_CONF_ALS_IR_MODE_MASK,
 | |
| 					 ISL29028_CONF_ALS_IR_MODE_IR);
 | |
| 		break;
 | |
| 	case ISL29028_MODE_NONE:
 | |
| 		return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
 | |
| 					  ISL29028_CONF_ALS_EN_MASK,
 | |
| 					  ISL29028_CONF_ALS_DIS);
 | |
| 	}
 | |
| 
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Enable the ALS/IR */
 | |
| 	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
 | |
| 				 ISL29028_CONF_ALS_EN_MASK,
 | |
| 				 ISL29028_CONF_ALS_EN);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Need to wait for conversion time if ALS/IR mode enabled */
 | |
| 	msleep(ISL29028_CONV_TIME_MS);
 | |
| 
 | |
| 	chip->als_ir_mode = mode;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int isl29028_read_als_ir(struct isl29028_chip *chip, int *als_ir)
 | |
| {
 | |
| 	struct device *dev = regmap_get_device(chip->regmap);
 | |
| 	unsigned int lsb;
 | |
| 	unsigned int msb;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_L, &lsb);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev,
 | |
| 			"%s(): Error %d reading register ALSIR_L\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = regmap_read(chip->regmap, ISL29028_REG_ALSIR_U, &msb);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev,
 | |
| 			"%s(): Error %d reading register ALSIR_U\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	*als_ir = ((msb & 0xF) << 8) | (lsb & 0xFF);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int isl29028_read_proxim(struct isl29028_chip *chip, int *prox)
 | |
| {
 | |
| 	struct device *dev = regmap_get_device(chip->regmap);
 | |
| 	unsigned int data;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!chip->enable_prox) {
 | |
| 		ret = isl29028_enable_proximity(chip);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 
 | |
| 		chip->enable_prox = true;
 | |
| 	}
 | |
| 
 | |
| 	ret = regmap_read(chip->regmap, ISL29028_REG_PROX_DATA, &data);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev, "%s(): Error %d reading register PROX_DATA\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	*prox = data;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
 | |
| {
 | |
| 	struct device *dev = regmap_get_device(chip->regmap);
 | |
| 	int ret;
 | |
| 	int als_ir_data;
 | |
| 
 | |
| 	ret = isl29028_set_als_ir_mode(chip, ISL29028_MODE_ALS);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev, "%s(): Error %d enabling ALS mode\n", __func__,
 | |
| 			ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = isl29028_read_als_ir(chip, &als_ir_data);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	/*
 | |
| 	 * convert als data count to lux.
 | |
| 	 * if lux_scale = 125,  lux = count * 0.031
 | |
| 	 * if lux_scale = 2000, lux = count * 0.49
 | |
| 	 */
 | |
| 	if (chip->lux_scale == 125)
 | |
| 		als_ir_data = (als_ir_data * 31) / 1000;
 | |
| 	else
 | |
| 		als_ir_data = (als_ir_data * 49) / 100;
 | |
| 
 | |
| 	*als_data = als_ir_data;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data)
 | |
| {
 | |
| 	struct device *dev = regmap_get_device(chip->regmap);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = isl29028_set_als_ir_mode(chip, ISL29028_MODE_IR);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(dev, "%s(): Error %d enabling IR mode\n", __func__,
 | |
| 			ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	return isl29028_read_als_ir(chip, ir_data);
 | |
| }
 | |
| 
 | |
| static int isl29028_set_pm_runtime_busy(struct isl29028_chip *chip, bool on)
 | |
| {
 | |
| 	struct device *dev = regmap_get_device(chip->regmap);
 | |
| 	int ret;
 | |
| 
 | |
| 	if (on) {
 | |
| 		ret = pm_runtime_resume_and_get(dev);
 | |
| 	} else {
 | |
| 		pm_runtime_mark_last_busy(dev);
 | |
| 		ret = pm_runtime_put_autosuspend(dev);
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| /* Channel IO */
 | |
| static int isl29028_write_raw(struct iio_dev *indio_dev,
 | |
| 			      struct iio_chan_spec const *chan,
 | |
| 			      int val, int val2, long mask)
 | |
| {
 | |
| 	struct isl29028_chip *chip = iio_priv(indio_dev);
 | |
| 	struct device *dev = regmap_get_device(chip->regmap);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = isl29028_set_pm_runtime_busy(chip, true);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 
 | |
| 	ret = -EINVAL;
 | |
| 	switch (chan->type) {
 | |
| 	case IIO_PROXIMITY:
 | |
| 		if (mask != IIO_CHAN_INFO_SAMP_FREQ) {
 | |
| 			dev_err(dev,
 | |
| 				"%s(): proximity: Mask value 0x%08lx is not supported\n",
 | |
| 				__func__, mask);
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		if (val < 1 || val > 100) {
 | |
| 			dev_err(dev,
 | |
| 				"%s(): proximity: Sampling frequency %d is not in the range [1:100]\n",
 | |
| 				__func__, val);
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		ret = isl29028_set_proxim_sampling(chip, val, val2);
 | |
| 		break;
 | |
| 	case IIO_LIGHT:
 | |
| 		if (mask != IIO_CHAN_INFO_SCALE) {
 | |
| 			dev_err(dev,
 | |
| 				"%s(): light: Mask value 0x%08lx is not supported\n",
 | |
| 				__func__, mask);
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		if (val != 125 && val != 2000) {
 | |
| 			dev_err(dev,
 | |
| 				"%s(): light: Lux scale %d is not in the set {125, 2000}\n",
 | |
| 				__func__, val);
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		ret = isl29028_set_als_scale(chip, val);
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_err(dev, "%s(): Unsupported channel type %x\n",
 | |
| 			__func__, chan->type);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&chip->lock);
 | |
| 
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = isl29028_set_pm_runtime_busy(chip, false);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int isl29028_read_raw(struct iio_dev *indio_dev,
 | |
| 			     struct iio_chan_spec const *chan,
 | |
| 			     int *val, int *val2, long mask)
 | |
| {
 | |
| 	struct isl29028_chip *chip = iio_priv(indio_dev);
 | |
| 	struct device *dev = regmap_get_device(chip->regmap);
 | |
| 	int ret, pm_ret;
 | |
| 
 | |
| 	ret = isl29028_set_pm_runtime_busy(chip, true);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 
 | |
| 	ret = -EINVAL;
 | |
| 	switch (mask) {
 | |
| 	case IIO_CHAN_INFO_RAW:
 | |
| 	case IIO_CHAN_INFO_PROCESSED:
 | |
| 		switch (chan->type) {
 | |
| 		case IIO_LIGHT:
 | |
| 			ret = isl29028_als_get(chip, val);
 | |
| 			break;
 | |
| 		case IIO_INTENSITY:
 | |
| 			ret = isl29028_ir_get(chip, val);
 | |
| 			break;
 | |
| 		case IIO_PROXIMITY:
 | |
| 			ret = isl29028_read_proxim(chip, val);
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 
 | |
| 		if (ret < 0)
 | |
| 			break;
 | |
| 
 | |
| 		ret = IIO_VAL_INT;
 | |
| 		break;
 | |
| 	case IIO_CHAN_INFO_SAMP_FREQ:
 | |
| 		if (chan->type != IIO_PROXIMITY)
 | |
| 			break;
 | |
| 
 | |
| 		*val = chip->prox_sampling_int;
 | |
| 		*val2 = chip->prox_sampling_frac;
 | |
| 		ret = IIO_VAL_INT;
 | |
| 		break;
 | |
| 	case IIO_CHAN_INFO_SCALE:
 | |
| 		if (chan->type != IIO_LIGHT)
 | |
| 			break;
 | |
| 		*val = chip->lux_scale;
 | |
| 		ret = IIO_VAL_INT;
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_err(dev, "%s(): mask value 0x%08lx is not supported\n",
 | |
| 			__func__, mask);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	mutex_unlock(&chip->lock);
 | |
| 
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	/**
 | |
| 	 * Preserve the ret variable if the call to
 | |
| 	 * isl29028_set_pm_runtime_busy() is successful so the reading
 | |
| 	 * (if applicable) is returned to user space.
 | |
| 	 */
 | |
| 	pm_ret = isl29028_set_pm_runtime_busy(chip, false);
 | |
| 	if (pm_ret < 0)
 | |
| 		return pm_ret;
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static IIO_CONST_ATTR(in_proximity_sampling_frequency_available,
 | |
| 				"1.25 2.5 5 10 13.3 20 80 100");
 | |
| static IIO_CONST_ATTR(in_illuminance_scale_available, "125 2000");
 | |
| 
 | |
| #define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
 | |
| static struct attribute *isl29028_attributes[] = {
 | |
| 	ISL29028_CONST_ATTR(in_proximity_sampling_frequency_available),
 | |
| 	ISL29028_CONST_ATTR(in_illuminance_scale_available),
 | |
| 	NULL,
 | |
| };
 | |
| 
 | |
| static const struct attribute_group isl29108_group = {
 | |
| 	.attrs = isl29028_attributes,
 | |
| };
 | |
| 
 | |
| static const struct iio_chan_spec isl29028_channels[] = {
 | |
| 	{
 | |
| 		.type = IIO_LIGHT,
 | |
| 		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
 | |
| 		BIT(IIO_CHAN_INFO_SCALE),
 | |
| 	}, {
 | |
| 		.type = IIO_INTENSITY,
 | |
| 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 | |
| 	}, {
 | |
| 		.type = IIO_PROXIMITY,
 | |
| 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 		BIT(IIO_CHAN_INFO_SAMP_FREQ),
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static const struct iio_info isl29028_info = {
 | |
| 	.attrs = &isl29108_group,
 | |
| 	.read_raw = isl29028_read_raw,
 | |
| 	.write_raw = isl29028_write_raw,
 | |
| };
 | |
| 
 | |
| static int isl29028_clear_configure_reg(struct isl29028_chip *chip)
 | |
| {
 | |
| 	struct device *dev = regmap_get_device(chip->regmap);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_write(chip->regmap, ISL29028_REG_CONFIGURE, 0x0);
 | |
| 	if (ret < 0)
 | |
| 		dev_err(dev, "%s(): Error %d clearing the CONFIGURE register\n",
 | |
| 			__func__, ret);
 | |
| 
 | |
| 	chip->als_ir_mode = ISL29028_MODE_NONE;
 | |
| 	chip->enable_prox = false;
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static bool isl29028_is_volatile_reg(struct device *dev, unsigned int reg)
 | |
| {
 | |
| 	switch (reg) {
 | |
| 	case ISL29028_REG_INTERRUPT:
 | |
| 	case ISL29028_REG_PROX_DATA:
 | |
| 	case ISL29028_REG_ALSIR_L:
 | |
| 	case ISL29028_REG_ALSIR_U:
 | |
| 		return true;
 | |
| 	default:
 | |
| 		return false;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static const struct regmap_config isl29028_regmap_config = {
 | |
| 	.reg_bits = 8,
 | |
| 	.val_bits = 8,
 | |
| 	.volatile_reg = isl29028_is_volatile_reg,
 | |
| 	.max_register = ISL29028_NUM_REGS - 1,
 | |
| 	.num_reg_defaults_raw = ISL29028_NUM_REGS,
 | |
| 	.cache_type = REGCACHE_RBTREE,
 | |
| };
 | |
| 
 | |
| static int isl29028_probe(struct i2c_client *client,
 | |
| 			  const struct i2c_device_id *id)
 | |
| {
 | |
| 	struct isl29028_chip *chip;
 | |
| 	struct iio_dev *indio_dev;
 | |
| 	int ret;
 | |
| 
 | |
| 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
 | |
| 	if (!indio_dev)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	chip = iio_priv(indio_dev);
 | |
| 
 | |
| 	i2c_set_clientdata(client, indio_dev);
 | |
| 	mutex_init(&chip->lock);
 | |
| 
 | |
| 	chip->regmap = devm_regmap_init_i2c(client, &isl29028_regmap_config);
 | |
| 	if (IS_ERR(chip->regmap)) {
 | |
| 		ret = PTR_ERR(chip->regmap);
 | |
| 		dev_err(&client->dev, "%s: Error %d initializing regmap\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	chip->enable_prox  = false;
 | |
| 	chip->prox_sampling_int = 20;
 | |
| 	chip->prox_sampling_frac = 0;
 | |
| 	chip->lux_scale = 2000;
 | |
| 
 | |
| 	ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&client->dev,
 | |
| 			"%s(): Error %d writing to TEST1_MODE register\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = regmap_write(chip->regmap, ISL29028_REG_TEST2_MODE, 0x0);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&client->dev,
 | |
| 			"%s(): Error %d writing to TEST2_MODE register\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = isl29028_clear_configure_reg(chip);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	indio_dev->info = &isl29028_info;
 | |
| 	indio_dev->channels = isl29028_channels;
 | |
| 	indio_dev->num_channels = ARRAY_SIZE(isl29028_channels);
 | |
| 	indio_dev->name = id->name;
 | |
| 	indio_dev->modes = INDIO_DIRECT_MODE;
 | |
| 
 | |
| 	pm_runtime_enable(&client->dev);
 | |
| 	pm_runtime_set_autosuspend_delay(&client->dev,
 | |
| 					 ISL29028_POWER_OFF_DELAY_MS);
 | |
| 	pm_runtime_use_autosuspend(&client->dev);
 | |
| 
 | |
| 	ret = devm_iio_device_register(indio_dev->dev.parent, indio_dev);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&client->dev,
 | |
| 			"%s(): iio registration failed with error %d\n",
 | |
| 			__func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int isl29028_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 | |
| 	struct isl29028_chip *chip = iio_priv(indio_dev);
 | |
| 
 | |
| 	iio_device_unregister(indio_dev);
 | |
| 
 | |
| 	pm_runtime_disable(&client->dev);
 | |
| 	pm_runtime_set_suspended(&client->dev);
 | |
| 
 | |
| 	return isl29028_clear_configure_reg(chip);
 | |
| }
 | |
| 
 | |
| static int __maybe_unused isl29028_suspend(struct device *dev)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
 | |
| 	struct isl29028_chip *chip = iio_priv(indio_dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 
 | |
| 	ret = isl29028_clear_configure_reg(chip);
 | |
| 
 | |
| 	mutex_unlock(&chip->lock);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int __maybe_unused isl29028_resume(struct device *dev)
 | |
| {
 | |
| 	/**
 | |
| 	 * The specific component (ALS/IR or proximity) will enable itself as
 | |
| 	 * needed the next time that the user requests a reading. This is done
 | |
| 	 * above in isl29028_set_als_ir_mode() and isl29028_enable_proximity().
 | |
| 	 */
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct dev_pm_ops isl29028_pm_ops = {
 | |
| 	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
 | |
| 				pm_runtime_force_resume)
 | |
| 	SET_RUNTIME_PM_OPS(isl29028_suspend, isl29028_resume, NULL)
 | |
| };
 | |
| 
 | |
| static const struct i2c_device_id isl29028_id[] = {
 | |
| 	{"isl29028", 0},
 | |
| 	{"isl29030", 0},
 | |
| 	{}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, isl29028_id);
 | |
| 
 | |
| static const struct of_device_id isl29028_of_match[] = {
 | |
| 	{ .compatible = "isl,isl29028", }, /* for backward compat., don't use */
 | |
| 	{ .compatible = "isil,isl29028", },
 | |
| 	{ .compatible = "isil,isl29030", },
 | |
| 	{ },
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, isl29028_of_match);
 | |
| 
 | |
| static struct i2c_driver isl29028_driver = {
 | |
| 	.driver  = {
 | |
| 		.name = "isl29028",
 | |
| 		.pm = &isl29028_pm_ops,
 | |
| 		.of_match_table = isl29028_of_match,
 | |
| 	},
 | |
| 	.probe	 = isl29028_probe,
 | |
| 	.remove  = isl29028_remove,
 | |
| 	.id_table = isl29028_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(isl29028_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("ISL29028 Ambient Light and Proximity Sensor driver");
 | |
| MODULE_LICENSE("GPL v2");
 | |
| MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
 |