335 lines
		
	
	
		
			8.1 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			335 lines
		
	
	
		
			8.1 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| /*
 | |
|  * ROHM BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensor driver
 | |
|  *
 | |
|  * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
 | |
|  *
 | |
|  * Data sheets:
 | |
|  *  http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1710fvc-e.pdf
 | |
|  *  http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1715fvc-e.pdf
 | |
|  *  http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1721fvc-e.pdf
 | |
|  *  http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1750fvi-e.pdf
 | |
|  *  http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/light/bh1751fvi-e.pdf
 | |
|  *
 | |
|  * 7-bit I2C slave addresses:
 | |
|  *  0x23 (ADDR pin low)
 | |
|  *  0x5C (ADDR pin high)
 | |
|  *
 | |
|  */
 | |
| 
 | |
| #include <linux/delay.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/iio/iio.h>
 | |
| #include <linux/iio/sysfs.h>
 | |
| #include <linux/module.h>
 | |
| 
 | |
| #define BH1750_POWER_DOWN		0x00
 | |
| #define BH1750_ONE_TIME_H_RES_MODE	0x20 /* auto-mode for BH1721 */
 | |
| #define BH1750_CHANGE_INT_TIME_H_BIT	0x40
 | |
| #define BH1750_CHANGE_INT_TIME_L_BIT	0x60
 | |
| 
 | |
| enum {
 | |
| 	BH1710,
 | |
| 	BH1721,
 | |
| 	BH1750,
 | |
| };
 | |
| 
 | |
| struct bh1750_chip_info;
 | |
| struct bh1750_data {
 | |
| 	struct i2c_client *client;
 | |
| 	struct mutex lock;
 | |
| 	const struct bh1750_chip_info *chip_info;
 | |
| 	u16 mtreg;
 | |
| };
 | |
| 
 | |
| struct bh1750_chip_info {
 | |
| 	u16 mtreg_min;
 | |
| 	u16 mtreg_max;
 | |
| 	u16 mtreg_default;
 | |
| 	int mtreg_to_usec;
 | |
| 	int mtreg_to_scale;
 | |
| 
 | |
| 	/*
 | |
| 	 * For BH1710/BH1721 all possible integration time values won't fit
 | |
| 	 * into one page so displaying is limited to every second one.
 | |
| 	 * Note, that user can still write proper values which were not
 | |
| 	 * listed.
 | |
| 	 */
 | |
| 	int inc;
 | |
| 
 | |
| 	u16 int_time_low_mask;
 | |
| 	u16 int_time_high_mask;
 | |
| };
 | |
| 
 | |
| static const struct bh1750_chip_info bh1750_chip_info_tbl[] = {
 | |
| 	[BH1710] = { 140, 1022, 300, 400,  250000000, 2, 0x001F, 0x03E0 },
 | |
| 	[BH1721] = { 140, 1020, 300, 400,  250000000, 2, 0x0010, 0x03E0 },
 | |
| 	[BH1750] = { 31,  254,  69,  1740, 57500000,  1, 0x001F, 0x00E0 },
 | |
| };
 | |
| 
 | |
| static int bh1750_change_int_time(struct bh1750_data *data, int usec)
 | |
| {
 | |
| 	int ret;
 | |
| 	u16 val;
 | |
| 	u8 regval;
 | |
| 	const struct bh1750_chip_info *chip_info = data->chip_info;
 | |
| 
 | |
| 	if ((usec % chip_info->mtreg_to_usec) != 0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	val = usec / chip_info->mtreg_to_usec;
 | |
| 	if (val < chip_info->mtreg_min || val > chip_info->mtreg_max)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	regval = (val & chip_info->int_time_high_mask) >> 5;
 | |
| 	ret = i2c_smbus_write_byte(data->client,
 | |
| 				   BH1750_CHANGE_INT_TIME_H_BIT | regval);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	regval = val & chip_info->int_time_low_mask;
 | |
| 	ret = i2c_smbus_write_byte(data->client,
 | |
| 				   BH1750_CHANGE_INT_TIME_L_BIT | regval);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	data->mtreg = val;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int bh1750_read(struct bh1750_data *data, int *val)
 | |
| {
 | |
| 	int ret;
 | |
| 	__be16 result;
 | |
| 	const struct bh1750_chip_info *chip_info = data->chip_info;
 | |
| 	unsigned long delay = chip_info->mtreg_to_usec * data->mtreg;
 | |
| 
 | |
| 	/*
 | |
| 	 * BH1721 will enter continuous mode on receiving this command.
 | |
| 	 * Note, that this eliminates need for bh1750_resume().
 | |
| 	 */
 | |
| 	ret = i2c_smbus_write_byte(data->client, BH1750_ONE_TIME_H_RES_MODE);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	usleep_range(delay + 15000, delay + 40000);
 | |
| 
 | |
| 	ret = i2c_master_recv(data->client, (char *)&result, 2);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	*val = be16_to_cpu(result);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int bh1750_read_raw(struct iio_dev *indio_dev,
 | |
| 			   struct iio_chan_spec const *chan,
 | |
| 			   int *val, int *val2, long mask)
 | |
| {
 | |
| 	int ret, tmp;
 | |
| 	struct bh1750_data *data = iio_priv(indio_dev);
 | |
| 	const struct bh1750_chip_info *chip_info = data->chip_info;
 | |
| 
 | |
| 	switch (mask) {
 | |
| 	case IIO_CHAN_INFO_RAW:
 | |
| 		switch (chan->type) {
 | |
| 		case IIO_LIGHT:
 | |
| 			mutex_lock(&data->lock);
 | |
| 			ret = bh1750_read(data, val);
 | |
| 			mutex_unlock(&data->lock);
 | |
| 			if (ret < 0)
 | |
| 				return ret;
 | |
| 
 | |
| 			return IIO_VAL_INT;
 | |
| 		default:
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 	case IIO_CHAN_INFO_SCALE:
 | |
| 		tmp = chip_info->mtreg_to_scale / data->mtreg;
 | |
| 		*val = tmp / 1000000;
 | |
| 		*val2 = tmp % 1000000;
 | |
| 		return IIO_VAL_INT_PLUS_MICRO;
 | |
| 	case IIO_CHAN_INFO_INT_TIME:
 | |
| 		*val = 0;
 | |
| 		*val2 = chip_info->mtreg_to_usec * data->mtreg;
 | |
| 		return IIO_VAL_INT_PLUS_MICRO;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int bh1750_write_raw(struct iio_dev *indio_dev,
 | |
| 			    struct iio_chan_spec const *chan,
 | |
| 			    int val, int val2, long mask)
 | |
| {
 | |
| 	int ret;
 | |
| 	struct bh1750_data *data = iio_priv(indio_dev);
 | |
| 
 | |
| 	switch (mask) {
 | |
| 	case IIO_CHAN_INFO_INT_TIME:
 | |
| 		if (val != 0)
 | |
| 			return -EINVAL;
 | |
| 
 | |
| 		mutex_lock(&data->lock);
 | |
| 		ret = bh1750_change_int_time(data, val2);
 | |
| 		mutex_unlock(&data->lock);
 | |
| 		return ret;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static ssize_t bh1750_show_int_time_available(struct device *dev,
 | |
| 		struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	int i;
 | |
| 	size_t len = 0;
 | |
| 	struct bh1750_data *data = iio_priv(dev_to_iio_dev(dev));
 | |
| 	const struct bh1750_chip_info *chip_info = data->chip_info;
 | |
| 
 | |
| 	for (i = chip_info->mtreg_min; i <= chip_info->mtreg_max; i += chip_info->inc)
 | |
| 		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06d ",
 | |
| 				 chip_info->mtreg_to_usec * i);
 | |
| 
 | |
| 	buf[len - 1] = '\n';
 | |
| 
 | |
| 	return len;
 | |
| }
 | |
| 
 | |
| static IIO_DEV_ATTR_INT_TIME_AVAIL(bh1750_show_int_time_available);
 | |
| 
 | |
| static struct attribute *bh1750_attributes[] = {
 | |
| 	&iio_dev_attr_integration_time_available.dev_attr.attr,
 | |
| 	NULL,
 | |
| };
 | |
| 
 | |
| static const struct attribute_group bh1750_attribute_group = {
 | |
| 	.attrs = bh1750_attributes,
 | |
| };
 | |
| 
 | |
| static const struct iio_info bh1750_info = {
 | |
| 	.attrs = &bh1750_attribute_group,
 | |
| 	.read_raw = bh1750_read_raw,
 | |
| 	.write_raw = bh1750_write_raw,
 | |
| };
 | |
| 
 | |
| static const struct iio_chan_spec bh1750_channels[] = {
 | |
| 	{
 | |
| 		.type = IIO_LIGHT,
 | |
| 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				      BIT(IIO_CHAN_INFO_SCALE) |
 | |
| 				      BIT(IIO_CHAN_INFO_INT_TIME)
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static int bh1750_probe(struct i2c_client *client,
 | |
| 			const struct i2c_device_id *id)
 | |
| {
 | |
| 	int ret, usec;
 | |
| 	struct bh1750_data *data;
 | |
| 	struct iio_dev *indio_dev;
 | |
| 
 | |
| 	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C |
 | |
| 				I2C_FUNC_SMBUS_WRITE_BYTE))
 | |
| 		return -EOPNOTSUPP;
 | |
| 
 | |
| 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 | |
| 	if (!indio_dev)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	data = iio_priv(indio_dev);
 | |
| 	i2c_set_clientdata(client, indio_dev);
 | |
| 	data->client = client;
 | |
| 	data->chip_info = &bh1750_chip_info_tbl[id->driver_data];
 | |
| 
 | |
| 	usec = data->chip_info->mtreg_to_usec * data->chip_info->mtreg_default;
 | |
| 	ret = bh1750_change_int_time(data, usec);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	mutex_init(&data->lock);
 | |
| 	indio_dev->info = &bh1750_info;
 | |
| 	indio_dev->name = id->name;
 | |
| 	indio_dev->channels = bh1750_channels;
 | |
| 	indio_dev->num_channels = ARRAY_SIZE(bh1750_channels);
 | |
| 	indio_dev->modes = INDIO_DIRECT_MODE;
 | |
| 
 | |
| 	return iio_device_register(indio_dev);
 | |
| }
 | |
| 
 | |
| static int bh1750_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = i2c_get_clientdata(client);
 | |
| 	struct bh1750_data *data = iio_priv(indio_dev);
 | |
| 
 | |
| 	iio_device_unregister(indio_dev);
 | |
| 
 | |
| 	mutex_lock(&data->lock);
 | |
| 	i2c_smbus_write_byte(client, BH1750_POWER_DOWN);
 | |
| 	mutex_unlock(&data->lock);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int __maybe_unused bh1750_suspend(struct device *dev)
 | |
| {
 | |
| 	int ret;
 | |
| 	struct bh1750_data *data =
 | |
| 		iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
 | |
| 
 | |
| 	/*
 | |
| 	 * This is mainly for BH1721 which doesn't enter power down
 | |
| 	 * mode automatically.
 | |
| 	 */
 | |
| 	mutex_lock(&data->lock);
 | |
| 	ret = i2c_smbus_write_byte(data->client, BH1750_POWER_DOWN);
 | |
| 	mutex_unlock(&data->lock);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static SIMPLE_DEV_PM_OPS(bh1750_pm_ops, bh1750_suspend, NULL);
 | |
| 
 | |
| static const struct i2c_device_id bh1750_id[] = {
 | |
| 	{ "bh1710", BH1710 },
 | |
| 	{ "bh1715", BH1750 },
 | |
| 	{ "bh1721", BH1721 },
 | |
| 	{ "bh1750", BH1750 },
 | |
| 	{ "bh1751", BH1750 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, bh1750_id);
 | |
| 
 | |
| static const struct of_device_id bh1750_of_match[] = {
 | |
| 	{ .compatible = "rohm,bh1710", },
 | |
| 	{ .compatible = "rohm,bh1715", },
 | |
| 	{ .compatible = "rohm,bh1721", },
 | |
| 	{ .compatible = "rohm,bh1750", },
 | |
| 	{ .compatible = "rohm,bh1751", },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, bh1750_of_match);
 | |
| 
 | |
| static struct i2c_driver bh1750_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "bh1750",
 | |
| 		.of_match_table = bh1750_of_match,
 | |
| 		.pm = &bh1750_pm_ops,
 | |
| 	},
 | |
| 	.probe = bh1750_probe,
 | |
| 	.remove = bh1750_remove,
 | |
| 	.id_table = bh1750_id,
 | |
| 
 | |
| };
 | |
| module_i2c_driver(bh1750_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>");
 | |
| MODULE_DESCRIPTION("ROHM BH1710/BH1715/BH1721/BH1750/BH1751 als driver");
 | |
| MODULE_LICENSE("GPL v2");
 |