757 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			757 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * STMicroelectronics st_lsm6dsx FIFO buffer library driver
 | |
|  *
 | |
|  * LSM6DS3/LSM6DS3H/LSM6DSL/LSM6DSM/ISM330DLC/LSM6DS3TR-C:
 | |
|  * The FIFO buffer can be configured to store data from gyroscope and
 | |
|  * accelerometer. Samples are queued without any tag according to a
 | |
|  * specific pattern based on 'FIFO data sets' (6 bytes each):
 | |
|  *  - 1st data set is reserved for gyroscope data
 | |
|  *  - 2nd data set is reserved for accelerometer data
 | |
|  * The FIFO pattern changes depending on the ODRs and decimation factors
 | |
|  * assigned to the FIFO data sets. The first sequence of data stored in FIFO
 | |
|  * buffer contains the data of all the enabled FIFO data sets
 | |
|  * (e.g. Gx, Gy, Gz, Ax, Ay, Az), then data are repeated depending on the
 | |
|  * value of the decimation factor and ODR set for each FIFO data set.
 | |
|  *
 | |
|  * LSM6DSO/LSM6DSOX/ASM330LHH/LSM6DSR/LSM6DSRX/ISM330DHCX/LSM6DST/LSM6DSOP:
 | |
|  * The FIFO buffer can be configured to store data from gyroscope and
 | |
|  * accelerometer. Each sample is queued with a tag (1B) indicating data
 | |
|  * source (gyroscope, accelerometer, hw timer).
 | |
|  *
 | |
|  * FIFO supported modes:
 | |
|  *  - BYPASS: FIFO disabled
 | |
|  *  - CONTINUOUS: FIFO enabled. When the buffer is full, the FIFO index
 | |
|  *    restarts from the beginning and the oldest sample is overwritten
 | |
|  *
 | |
|  * Copyright 2016 STMicroelectronics Inc.
 | |
|  *
 | |
|  * Lorenzo Bianconi <lorenzo.bianconi@st.com>
 | |
|  * Denis Ciocca <denis.ciocca@st.com>
 | |
|  */
 | |
| #include <linux/module.h>
 | |
| #include <linux/iio/kfifo_buf.h>
 | |
| #include <linux/iio/iio.h>
 | |
| #include <linux/iio/buffer.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/bitfield.h>
 | |
| 
 | |
| #include <linux/platform_data/st_sensors_pdata.h>
 | |
| 
 | |
| #include "st_lsm6dsx.h"
 | |
| 
 | |
| #define ST_LSM6DSX_REG_FIFO_MODE_ADDR		0x0a
 | |
| #define ST_LSM6DSX_FIFO_MODE_MASK		GENMASK(2, 0)
 | |
| #define ST_LSM6DSX_FIFO_ODR_MASK		GENMASK(6, 3)
 | |
| #define ST_LSM6DSX_FIFO_EMPTY_MASK		BIT(12)
 | |
| #define ST_LSM6DSX_REG_FIFO_OUTL_ADDR		0x3e
 | |
| #define ST_LSM6DSX_REG_FIFO_OUT_TAG_ADDR	0x78
 | |
| #define ST_LSM6DSX_REG_TS_RESET_ADDR		0x42
 | |
| 
 | |
| #define ST_LSM6DSX_MAX_FIFO_ODR_VAL		0x08
 | |
| 
 | |
| #define ST_LSM6DSX_TS_RESET_VAL			0xaa
 | |
| 
 | |
| struct st_lsm6dsx_decimator_entry {
 | |
| 	u8 decimator;
 | |
| 	u8 val;
 | |
| };
 | |
| 
 | |
| enum st_lsm6dsx_fifo_tag {
 | |
| 	ST_LSM6DSX_GYRO_TAG = 0x01,
 | |
| 	ST_LSM6DSX_ACC_TAG = 0x02,
 | |
| 	ST_LSM6DSX_TS_TAG = 0x04,
 | |
| 	ST_LSM6DSX_EXT0_TAG = 0x0f,
 | |
| 	ST_LSM6DSX_EXT1_TAG = 0x10,
 | |
| 	ST_LSM6DSX_EXT2_TAG = 0x11,
 | |
| };
 | |
| 
 | |
| static const
 | |
| struct st_lsm6dsx_decimator_entry st_lsm6dsx_decimator_table[] = {
 | |
| 	{  0, 0x0 },
 | |
| 	{  1, 0x1 },
 | |
| 	{  2, 0x2 },
 | |
| 	{  3, 0x3 },
 | |
| 	{  4, 0x4 },
 | |
| 	{  8, 0x5 },
 | |
| 	{ 16, 0x6 },
 | |
| 	{ 32, 0x7 },
 | |
| };
 | |
| 
 | |
| static int
 | |
| st_lsm6dsx_get_decimator_val(struct st_lsm6dsx_sensor *sensor, u32 max_odr)
 | |
| {
 | |
| 	const int max_size = ARRAY_SIZE(st_lsm6dsx_decimator_table);
 | |
| 	u32 decimator =  max_odr / sensor->odr;
 | |
| 	int i;
 | |
| 
 | |
| 	if (decimator > 1)
 | |
| 		decimator = round_down(decimator, 2);
 | |
| 
 | |
| 	for (i = 0; i < max_size; i++) {
 | |
| 		if (st_lsm6dsx_decimator_table[i].decimator == decimator)
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	sensor->decimator = decimator;
 | |
| 	return i == max_size ? 0 : st_lsm6dsx_decimator_table[i].val;
 | |
| }
 | |
| 
 | |
| static void st_lsm6dsx_get_max_min_odr(struct st_lsm6dsx_hw *hw,
 | |
| 				       u32 *max_odr, u32 *min_odr)
 | |
| {
 | |
| 	struct st_lsm6dsx_sensor *sensor;
 | |
| 	int i;
 | |
| 
 | |
| 	*max_odr = 0, *min_odr = ~0;
 | |
| 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
 | |
| 		if (!hw->iio_devs[i])
 | |
| 			continue;
 | |
| 
 | |
| 		sensor = iio_priv(hw->iio_devs[i]);
 | |
| 
 | |
| 		if (!(hw->enable_mask & BIT(sensor->id)))
 | |
| 			continue;
 | |
| 
 | |
| 		*max_odr = max_t(u32, *max_odr, sensor->odr);
 | |
| 		*min_odr = min_t(u32, *min_odr, sensor->odr);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static u8 st_lsm6dsx_get_sip(struct st_lsm6dsx_sensor *sensor, u32 min_odr)
 | |
| {
 | |
| 	u8 sip = sensor->odr / min_odr;
 | |
| 
 | |
| 	return sip > 1 ? round_down(sip, 2) : sip;
 | |
| }
 | |
| 
 | |
| static int st_lsm6dsx_update_decimators(struct st_lsm6dsx_hw *hw)
 | |
| {
 | |
| 	const struct st_lsm6dsx_reg *ts_dec_reg;
 | |
| 	struct st_lsm6dsx_sensor *sensor;
 | |
| 	u16 sip = 0, ts_sip = 0;
 | |
| 	u32 max_odr, min_odr;
 | |
| 	int err = 0, i;
 | |
| 	u8 data;
 | |
| 
 | |
| 	st_lsm6dsx_get_max_min_odr(hw, &max_odr, &min_odr);
 | |
| 
 | |
| 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
 | |
| 		const struct st_lsm6dsx_reg *dec_reg;
 | |
| 
 | |
| 		if (!hw->iio_devs[i])
 | |
| 			continue;
 | |
| 
 | |
| 		sensor = iio_priv(hw->iio_devs[i]);
 | |
| 		/* update fifo decimators and sample in pattern */
 | |
| 		if (hw->enable_mask & BIT(sensor->id)) {
 | |
| 			sensor->sip = st_lsm6dsx_get_sip(sensor, min_odr);
 | |
| 			data = st_lsm6dsx_get_decimator_val(sensor, max_odr);
 | |
| 		} else {
 | |
| 			sensor->sip = 0;
 | |
| 			data = 0;
 | |
| 		}
 | |
| 		ts_sip = max_t(u16, ts_sip, sensor->sip);
 | |
| 
 | |
| 		dec_reg = &hw->settings->decimator[sensor->id];
 | |
| 		if (dec_reg->addr) {
 | |
| 			int val = ST_LSM6DSX_SHIFT_VAL(data, dec_reg->mask);
 | |
| 
 | |
| 			err = st_lsm6dsx_update_bits_locked(hw, dec_reg->addr,
 | |
| 							    dec_reg->mask,
 | |
| 							    val);
 | |
| 			if (err < 0)
 | |
| 				return err;
 | |
| 		}
 | |
| 		sip += sensor->sip;
 | |
| 	}
 | |
| 	hw->sip = sip + ts_sip;
 | |
| 	hw->ts_sip = ts_sip;
 | |
| 
 | |
| 	/*
 | |
| 	 * update hw ts decimator if necessary. Decimator for hw timestamp
 | |
| 	 * is always 1 or 0 in order to have a ts sample for each data
 | |
| 	 * sample in FIFO
 | |
| 	 */
 | |
| 	ts_dec_reg = &hw->settings->ts_settings.decimator;
 | |
| 	if (ts_dec_reg->addr) {
 | |
| 		int val, ts_dec = !!hw->ts_sip;
 | |
| 
 | |
| 		val = ST_LSM6DSX_SHIFT_VAL(ts_dec, ts_dec_reg->mask);
 | |
| 		err = st_lsm6dsx_update_bits_locked(hw, ts_dec_reg->addr,
 | |
| 						    ts_dec_reg->mask, val);
 | |
| 	}
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int st_lsm6dsx_set_fifo_mode(struct st_lsm6dsx_hw *hw,
 | |
| 				    enum st_lsm6dsx_fifo_mode fifo_mode)
 | |
| {
 | |
| 	unsigned int data;
 | |
| 
 | |
| 	data = FIELD_PREP(ST_LSM6DSX_FIFO_MODE_MASK, fifo_mode);
 | |
| 	return st_lsm6dsx_update_bits_locked(hw, ST_LSM6DSX_REG_FIFO_MODE_ADDR,
 | |
| 					     ST_LSM6DSX_FIFO_MODE_MASK, data);
 | |
| }
 | |
| 
 | |
| static int st_lsm6dsx_set_fifo_odr(struct st_lsm6dsx_sensor *sensor,
 | |
| 				   bool enable)
 | |
| {
 | |
| 	struct st_lsm6dsx_hw *hw = sensor->hw;
 | |
| 	const struct st_lsm6dsx_reg *batch_reg;
 | |
| 	u8 data;
 | |
| 
 | |
| 	batch_reg = &hw->settings->batch[sensor->id];
 | |
| 	if (batch_reg->addr) {
 | |
| 		int val;
 | |
| 
 | |
| 		if (enable) {
 | |
| 			int err;
 | |
| 
 | |
| 			err = st_lsm6dsx_check_odr(sensor, sensor->odr,
 | |
| 						   &data);
 | |
| 			if (err < 0)
 | |
| 				return err;
 | |
| 		} else {
 | |
| 			data = 0;
 | |
| 		}
 | |
| 		val = ST_LSM6DSX_SHIFT_VAL(data, batch_reg->mask);
 | |
| 		return st_lsm6dsx_update_bits_locked(hw, batch_reg->addr,
 | |
| 						     batch_reg->mask, val);
 | |
| 	} else {
 | |
| 		data = hw->enable_mask ? ST_LSM6DSX_MAX_FIFO_ODR_VAL : 0;
 | |
| 		return st_lsm6dsx_update_bits_locked(hw,
 | |
| 					ST_LSM6DSX_REG_FIFO_MODE_ADDR,
 | |
| 					ST_LSM6DSX_FIFO_ODR_MASK,
 | |
| 					FIELD_PREP(ST_LSM6DSX_FIFO_ODR_MASK,
 | |
| 						   data));
 | |
| 	}
 | |
| }
 | |
| 
 | |
| int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor, u16 watermark)
 | |
| {
 | |
| 	u16 fifo_watermark = ~0, cur_watermark, fifo_th_mask;
 | |
| 	struct st_lsm6dsx_hw *hw = sensor->hw;
 | |
| 	struct st_lsm6dsx_sensor *cur_sensor;
 | |
| 	int i, err, data;
 | |
| 	__le16 wdata;
 | |
| 
 | |
| 	if (!hw->sip)
 | |
| 		return 0;
 | |
| 
 | |
| 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
 | |
| 		if (!hw->iio_devs[i])
 | |
| 			continue;
 | |
| 
 | |
| 		cur_sensor = iio_priv(hw->iio_devs[i]);
 | |
| 
 | |
| 		if (!(hw->enable_mask & BIT(cur_sensor->id)))
 | |
| 			continue;
 | |
| 
 | |
| 		cur_watermark = (cur_sensor == sensor) ? watermark
 | |
| 						       : cur_sensor->watermark;
 | |
| 
 | |
| 		fifo_watermark = min_t(u16, fifo_watermark, cur_watermark);
 | |
| 	}
 | |
| 
 | |
| 	fifo_watermark = max_t(u16, fifo_watermark, hw->sip);
 | |
| 	fifo_watermark = (fifo_watermark / hw->sip) * hw->sip;
 | |
| 	fifo_watermark = fifo_watermark * hw->settings->fifo_ops.th_wl;
 | |
| 
 | |
| 	mutex_lock(&hw->page_lock);
 | |
| 	err = regmap_read(hw->regmap, hw->settings->fifo_ops.fifo_th.addr + 1,
 | |
| 			  &data);
 | |
| 	if (err < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	fifo_th_mask = hw->settings->fifo_ops.fifo_th.mask;
 | |
| 	fifo_watermark = ((data << 8) & ~fifo_th_mask) |
 | |
| 			 (fifo_watermark & fifo_th_mask);
 | |
| 
 | |
| 	wdata = cpu_to_le16(fifo_watermark);
 | |
| 	err = regmap_bulk_write(hw->regmap,
 | |
| 				hw->settings->fifo_ops.fifo_th.addr,
 | |
| 				&wdata, sizeof(wdata));
 | |
| out:
 | |
| 	mutex_unlock(&hw->page_lock);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int st_lsm6dsx_reset_hw_ts(struct st_lsm6dsx_hw *hw)
 | |
| {
 | |
| 	struct st_lsm6dsx_sensor *sensor;
 | |
| 	int i, err;
 | |
| 
 | |
| 	/* reset hw ts counter */
 | |
| 	err = st_lsm6dsx_write_locked(hw, ST_LSM6DSX_REG_TS_RESET_ADDR,
 | |
| 				      ST_LSM6DSX_TS_RESET_VAL);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
 | |
| 		if (!hw->iio_devs[i])
 | |
| 			continue;
 | |
| 
 | |
| 		sensor = iio_priv(hw->iio_devs[i]);
 | |
| 		/*
 | |
| 		 * store enable buffer timestamp as reference for
 | |
| 		 * hw timestamp
 | |
| 		 */
 | |
| 		sensor->ts_ref = iio_get_time_ns(hw->iio_devs[i]);
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int st_lsm6dsx_resume_fifo(struct st_lsm6dsx_hw *hw)
 | |
| {
 | |
| 	int err;
 | |
| 
 | |
| 	/* reset hw ts counter */
 | |
| 	err = st_lsm6dsx_reset_hw_ts(hw);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	return st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_CONT);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Set max bulk read to ST_LSM6DSX_MAX_WORD_LEN/ST_LSM6DSX_MAX_TAGGED_WORD_LEN
 | |
|  * in order to avoid a kmalloc for each bus access
 | |
|  */
 | |
| static inline int st_lsm6dsx_read_block(struct st_lsm6dsx_hw *hw, u8 addr,
 | |
| 					u8 *data, unsigned int data_len,
 | |
| 					unsigned int max_word_len)
 | |
| {
 | |
| 	unsigned int word_len, read_len = 0;
 | |
| 	int err;
 | |
| 
 | |
| 	while (read_len < data_len) {
 | |
| 		word_len = min_t(unsigned int, data_len - read_len,
 | |
| 				 max_word_len);
 | |
| 		err = st_lsm6dsx_read_locked(hw, addr, data + read_len,
 | |
| 					     word_len);
 | |
| 		if (err < 0)
 | |
| 			return err;
 | |
| 		read_len += word_len;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #define ST_LSM6DSX_IIO_BUFF_SIZE	(ALIGN(ST_LSM6DSX_SAMPLE_SIZE, \
 | |
| 					       sizeof(s64)) + sizeof(s64))
 | |
| /**
 | |
|  * st_lsm6dsx_read_fifo() - hw FIFO read routine
 | |
|  * @hw: Pointer to instance of struct st_lsm6dsx_hw.
 | |
|  *
 | |
|  * Read samples from the hw FIFO and push them to IIO buffers.
 | |
|  *
 | |
|  * Return: Number of bytes read from the FIFO
 | |
|  */
 | |
| int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
 | |
| {
 | |
| 	struct st_lsm6dsx_sensor *acc_sensor, *gyro_sensor, *ext_sensor = NULL;
 | |
| 	int err, sip, acc_sip, gyro_sip, ts_sip, ext_sip, read_len, offset;
 | |
| 	u16 fifo_len, pattern_len = hw->sip * ST_LSM6DSX_SAMPLE_SIZE;
 | |
| 	u16 fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
 | |
| 	bool reset_ts = false;
 | |
| 	__le16 fifo_status;
 | |
| 	s64 ts = 0;
 | |
| 
 | |
| 	err = st_lsm6dsx_read_locked(hw,
 | |
| 				     hw->settings->fifo_ops.fifo_diff.addr,
 | |
| 				     &fifo_status, sizeof(fifo_status));
 | |
| 	if (err < 0) {
 | |
| 		dev_err(hw->dev, "failed to read fifo status (err=%d)\n",
 | |
| 			err);
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	if (fifo_status & cpu_to_le16(ST_LSM6DSX_FIFO_EMPTY_MASK))
 | |
| 		return 0;
 | |
| 
 | |
| 	fifo_len = (le16_to_cpu(fifo_status) & fifo_diff_mask) *
 | |
| 		   ST_LSM6DSX_CHAN_SIZE;
 | |
| 	fifo_len = (fifo_len / pattern_len) * pattern_len;
 | |
| 
 | |
| 	acc_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]);
 | |
| 	gyro_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_GYRO]);
 | |
| 	if (hw->iio_devs[ST_LSM6DSX_ID_EXT0])
 | |
| 		ext_sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_EXT0]);
 | |
| 
 | |
| 	for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
 | |
| 		err = st_lsm6dsx_read_block(hw, ST_LSM6DSX_REG_FIFO_OUTL_ADDR,
 | |
| 					    hw->buff, pattern_len,
 | |
| 					    ST_LSM6DSX_MAX_WORD_LEN);
 | |
| 		if (err < 0) {
 | |
| 			dev_err(hw->dev,
 | |
| 				"failed to read pattern from fifo (err=%d)\n",
 | |
| 				err);
 | |
| 			return err;
 | |
| 		}
 | |
| 
 | |
| 		/*
 | |
| 		 * Data are written to the FIFO with a specific pattern
 | |
| 		 * depending on the configured ODRs. The first sequence of data
 | |
| 		 * stored in FIFO contains the data of all enabled sensors
 | |
| 		 * (e.g. Gx, Gy, Gz, Ax, Ay, Az, Ts), then data are repeated
 | |
| 		 * depending on the value of the decimation factor set for each
 | |
| 		 * sensor.
 | |
| 		 *
 | |
| 		 * Supposing the FIFO is storing data from gyroscope and
 | |
| 		 * accelerometer at different ODRs:
 | |
| 		 *   - gyroscope ODR = 208Hz, accelerometer ODR = 104Hz
 | |
| 		 * Since the gyroscope ODR is twice the accelerometer one, the
 | |
| 		 * following pattern is repeated every 9 samples:
 | |
| 		 *   - Gx, Gy, Gz, Ax, Ay, Az, Ts, Gx, Gy, Gz, Ts, Gx, ..
 | |
| 		 */
 | |
| 		ext_sip = ext_sensor ? ext_sensor->sip : 0;
 | |
| 		gyro_sip = gyro_sensor->sip;
 | |
| 		acc_sip = acc_sensor->sip;
 | |
| 		ts_sip = hw->ts_sip;
 | |
| 		offset = 0;
 | |
| 		sip = 0;
 | |
| 
 | |
| 		while (acc_sip > 0 || gyro_sip > 0 || ext_sip > 0) {
 | |
| 			if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
 | |
| 				memcpy(hw->scan[ST_LSM6DSX_ID_GYRO].channels,
 | |
| 				       &hw->buff[offset],
 | |
| 				       sizeof(hw->scan[ST_LSM6DSX_ID_GYRO].channels));
 | |
| 				offset += sizeof(hw->scan[ST_LSM6DSX_ID_GYRO].channels);
 | |
| 			}
 | |
| 			if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
 | |
| 				memcpy(hw->scan[ST_LSM6DSX_ID_ACC].channels,
 | |
| 				       &hw->buff[offset],
 | |
| 				       sizeof(hw->scan[ST_LSM6DSX_ID_ACC].channels));
 | |
| 				offset += sizeof(hw->scan[ST_LSM6DSX_ID_ACC].channels);
 | |
| 			}
 | |
| 			if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
 | |
| 				memcpy(hw->scan[ST_LSM6DSX_ID_EXT0].channels,
 | |
| 				       &hw->buff[offset],
 | |
| 				       sizeof(hw->scan[ST_LSM6DSX_ID_EXT0].channels));
 | |
| 				offset += sizeof(hw->scan[ST_LSM6DSX_ID_EXT0].channels);
 | |
| 			}
 | |
| 
 | |
| 			if (ts_sip-- > 0) {
 | |
| 				u8 data[ST_LSM6DSX_SAMPLE_SIZE];
 | |
| 
 | |
| 				memcpy(data, &hw->buff[offset], sizeof(data));
 | |
| 				/*
 | |
| 				 * hw timestamp is 3B long and it is stored
 | |
| 				 * in FIFO using 6B as 4th FIFO data set
 | |
| 				 * according to this schema:
 | |
| 				 * B0 = ts[15:8], B1 = ts[23:16], B3 = ts[7:0]
 | |
| 				 */
 | |
| 				ts = data[1] << 16 | data[0] << 8 | data[3];
 | |
| 				/*
 | |
| 				 * check if hw timestamp engine is going to
 | |
| 				 * reset (the sensor generates an interrupt
 | |
| 				 * to signal the hw timestamp will reset in
 | |
| 				 * 1.638s)
 | |
| 				 */
 | |
| 				if (!reset_ts && ts >= 0xff0000)
 | |
| 					reset_ts = true;
 | |
| 				ts *= hw->ts_gain;
 | |
| 
 | |
| 				offset += ST_LSM6DSX_SAMPLE_SIZE;
 | |
| 			}
 | |
| 
 | |
| 			if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
 | |
| 				iio_push_to_buffers_with_timestamp(
 | |
| 					hw->iio_devs[ST_LSM6DSX_ID_GYRO],
 | |
| 					&hw->scan[ST_LSM6DSX_ID_GYRO],
 | |
| 					gyro_sensor->ts_ref + ts);
 | |
| 				gyro_sip--;
 | |
| 			}
 | |
| 			if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
 | |
| 				iio_push_to_buffers_with_timestamp(
 | |
| 					hw->iio_devs[ST_LSM6DSX_ID_ACC],
 | |
| 					&hw->scan[ST_LSM6DSX_ID_ACC],
 | |
| 					acc_sensor->ts_ref + ts);
 | |
| 				acc_sip--;
 | |
| 			}
 | |
| 			if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
 | |
| 				iio_push_to_buffers_with_timestamp(
 | |
| 					hw->iio_devs[ST_LSM6DSX_ID_EXT0],
 | |
| 					&hw->scan[ST_LSM6DSX_ID_EXT0],
 | |
| 					ext_sensor->ts_ref + ts);
 | |
| 				ext_sip--;
 | |
| 			}
 | |
| 			sip++;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (unlikely(reset_ts)) {
 | |
| 		err = st_lsm6dsx_reset_hw_ts(hw);
 | |
| 		if (err < 0) {
 | |
| 			dev_err(hw->dev, "failed to reset hw ts (err=%d)\n",
 | |
| 				err);
 | |
| 			return err;
 | |
| 		}
 | |
| 	}
 | |
| 	return read_len;
 | |
| }
 | |
| 
 | |
| #define ST_LSM6DSX_INVALID_SAMPLE	0x7ffd
 | |
| static int
 | |
| st_lsm6dsx_push_tagged_data(struct st_lsm6dsx_hw *hw, u8 tag,
 | |
| 			    u8 *data, s64 ts)
 | |
| {
 | |
| 	s16 val = le16_to_cpu(*(__le16 *)data);
 | |
| 	struct st_lsm6dsx_sensor *sensor;
 | |
| 	struct iio_dev *iio_dev;
 | |
| 
 | |
| 	/* invalid sample during bootstrap phase */
 | |
| 	if (val >= ST_LSM6DSX_INVALID_SAMPLE)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	/*
 | |
| 	 * EXT_TAG are managed in FIFO fashion so ST_LSM6DSX_EXT0_TAG
 | |
| 	 * corresponds to the first enabled channel, ST_LSM6DSX_EXT1_TAG
 | |
| 	 * to the second one and ST_LSM6DSX_EXT2_TAG to the last enabled
 | |
| 	 * channel
 | |
| 	 */
 | |
| 	switch (tag) {
 | |
| 	case ST_LSM6DSX_GYRO_TAG:
 | |
| 		iio_dev = hw->iio_devs[ST_LSM6DSX_ID_GYRO];
 | |
| 		break;
 | |
| 	case ST_LSM6DSX_ACC_TAG:
 | |
| 		iio_dev = hw->iio_devs[ST_LSM6DSX_ID_ACC];
 | |
| 		break;
 | |
| 	case ST_LSM6DSX_EXT0_TAG:
 | |
| 		if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0))
 | |
| 			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT0];
 | |
| 		else if (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1))
 | |
| 			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1];
 | |
| 		else
 | |
| 			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
 | |
| 		break;
 | |
| 	case ST_LSM6DSX_EXT1_TAG:
 | |
| 		if ((hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT0)) &&
 | |
| 		    (hw->enable_mask & BIT(ST_LSM6DSX_ID_EXT1)))
 | |
| 			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT1];
 | |
| 		else
 | |
| 			iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
 | |
| 		break;
 | |
| 	case ST_LSM6DSX_EXT2_TAG:
 | |
| 		iio_dev = hw->iio_devs[ST_LSM6DSX_ID_EXT2];
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	sensor = iio_priv(iio_dev);
 | |
| 	iio_push_to_buffers_with_timestamp(iio_dev, data,
 | |
| 					   ts + sensor->ts_ref);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /**
 | |
|  * st_lsm6dsx_read_tagged_fifo() - tagged hw FIFO read routine
 | |
|  * @hw: Pointer to instance of struct st_lsm6dsx_hw.
 | |
|  *
 | |
|  * Read samples from the hw FIFO and push them to IIO buffers.
 | |
|  *
 | |
|  * Return: Number of bytes read from the FIFO
 | |
|  */
 | |
| int st_lsm6dsx_read_tagged_fifo(struct st_lsm6dsx_hw *hw)
 | |
| {
 | |
| 	u16 pattern_len = hw->sip * ST_LSM6DSX_TAGGED_SAMPLE_SIZE;
 | |
| 	u16 fifo_len, fifo_diff_mask;
 | |
| 	/*
 | |
| 	 * Alignment needed as this can ultimately be passed to a
 | |
| 	 * call to iio_push_to_buffers_with_timestamp() which
 | |
| 	 * must be passed a buffer that is aligned to 8 bytes so
 | |
| 	 * as to allow insertion of a naturally aligned timestamp.
 | |
| 	 */
 | |
| 	u8 iio_buff[ST_LSM6DSX_IIO_BUFF_SIZE] __aligned(8);
 | |
| 	u8 tag;
 | |
| 	bool reset_ts = false;
 | |
| 	int i, err, read_len;
 | |
| 	__le16 fifo_status;
 | |
| 	s64 ts = 0;
 | |
| 
 | |
| 	err = st_lsm6dsx_read_locked(hw,
 | |
| 				     hw->settings->fifo_ops.fifo_diff.addr,
 | |
| 				     &fifo_status, sizeof(fifo_status));
 | |
| 	if (err < 0) {
 | |
| 		dev_err(hw->dev, "failed to read fifo status (err=%d)\n",
 | |
| 			err);
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	fifo_diff_mask = hw->settings->fifo_ops.fifo_diff.mask;
 | |
| 	fifo_len = (le16_to_cpu(fifo_status) & fifo_diff_mask) *
 | |
| 		   ST_LSM6DSX_TAGGED_SAMPLE_SIZE;
 | |
| 	if (!fifo_len)
 | |
| 		return 0;
 | |
| 
 | |
| 	for (read_len = 0; read_len < fifo_len; read_len += pattern_len) {
 | |
| 		err = st_lsm6dsx_read_block(hw,
 | |
| 					    ST_LSM6DSX_REG_FIFO_OUT_TAG_ADDR,
 | |
| 					    hw->buff, pattern_len,
 | |
| 					    ST_LSM6DSX_MAX_TAGGED_WORD_LEN);
 | |
| 		if (err < 0) {
 | |
| 			dev_err(hw->dev,
 | |
| 				"failed to read pattern from fifo (err=%d)\n",
 | |
| 				err);
 | |
| 			return err;
 | |
| 		}
 | |
| 
 | |
| 		for (i = 0; i < pattern_len;
 | |
| 		     i += ST_LSM6DSX_TAGGED_SAMPLE_SIZE) {
 | |
| 			memcpy(iio_buff, &hw->buff[i + ST_LSM6DSX_TAG_SIZE],
 | |
| 			       ST_LSM6DSX_SAMPLE_SIZE);
 | |
| 
 | |
| 			tag = hw->buff[i] >> 3;
 | |
| 			if (tag == ST_LSM6DSX_TS_TAG) {
 | |
| 				/*
 | |
| 				 * hw timestamp is 4B long and it is stored
 | |
| 				 * in FIFO according to this schema:
 | |
| 				 * B0 = ts[7:0], B1 = ts[15:8], B2 = ts[23:16],
 | |
| 				 * B3 = ts[31:24]
 | |
| 				 */
 | |
| 				ts = le32_to_cpu(*((__le32 *)iio_buff));
 | |
| 				/*
 | |
| 				 * check if hw timestamp engine is going to
 | |
| 				 * reset (the sensor generates an interrupt
 | |
| 				 * to signal the hw timestamp will reset in
 | |
| 				 * 1.638s)
 | |
| 				 */
 | |
| 				if (!reset_ts && ts >= 0xffff0000)
 | |
| 					reset_ts = true;
 | |
| 				ts *= hw->ts_gain;
 | |
| 			} else {
 | |
| 				st_lsm6dsx_push_tagged_data(hw, tag, iio_buff,
 | |
| 							    ts);
 | |
| 			}
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (unlikely(reset_ts)) {
 | |
| 		err = st_lsm6dsx_reset_hw_ts(hw);
 | |
| 		if (err < 0)
 | |
| 			return err;
 | |
| 	}
 | |
| 	return read_len;
 | |
| }
 | |
| 
 | |
| int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
 | |
| {
 | |
| 	int err;
 | |
| 
 | |
| 	if (!hw->settings->fifo_ops.read_fifo)
 | |
| 		return -ENOTSUPP;
 | |
| 
 | |
| 	mutex_lock(&hw->fifo_lock);
 | |
| 
 | |
| 	hw->settings->fifo_ops.read_fifo(hw);
 | |
| 	err = st_lsm6dsx_set_fifo_mode(hw, ST_LSM6DSX_FIFO_BYPASS);
 | |
| 
 | |
| 	mutex_unlock(&hw->fifo_lock);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
 | |
| {
 | |
| 	struct st_lsm6dsx_hw *hw = sensor->hw;
 | |
| 	u8 fifo_mask;
 | |
| 	int err;
 | |
| 
 | |
| 	mutex_lock(&hw->conf_lock);
 | |
| 
 | |
| 	if (enable)
 | |
| 		fifo_mask = hw->fifo_mask | BIT(sensor->id);
 | |
| 	else
 | |
| 		fifo_mask = hw->fifo_mask & ~BIT(sensor->id);
 | |
| 
 | |
| 	if (hw->fifo_mask) {
 | |
| 		err = st_lsm6dsx_flush_fifo(hw);
 | |
| 		if (err < 0)
 | |
| 			goto out;
 | |
| 	}
 | |
| 
 | |
| 	if (sensor->id == ST_LSM6DSX_ID_EXT0 ||
 | |
| 	    sensor->id == ST_LSM6DSX_ID_EXT1 ||
 | |
| 	    sensor->id == ST_LSM6DSX_ID_EXT2) {
 | |
| 		err = st_lsm6dsx_shub_set_enable(sensor, enable);
 | |
| 		if (err < 0)
 | |
| 			goto out;
 | |
| 	} else {
 | |
| 		err = st_lsm6dsx_sensor_set_enable(sensor, enable);
 | |
| 		if (err < 0)
 | |
| 			goto out;
 | |
| 	}
 | |
| 
 | |
| 	err = st_lsm6dsx_set_fifo_odr(sensor, enable);
 | |
| 	if (err < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	err = st_lsm6dsx_update_decimators(hw);
 | |
| 	if (err < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	err = st_lsm6dsx_update_watermark(sensor, sensor->watermark);
 | |
| 	if (err < 0)
 | |
| 		goto out;
 | |
| 
 | |
| 	if (fifo_mask) {
 | |
| 		err = st_lsm6dsx_resume_fifo(hw);
 | |
| 		if (err < 0)
 | |
| 			goto out;
 | |
| 	}
 | |
| 
 | |
| 	hw->fifo_mask = fifo_mask;
 | |
| 
 | |
| out:
 | |
| 	mutex_unlock(&hw->conf_lock);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int st_lsm6dsx_buffer_preenable(struct iio_dev *iio_dev)
 | |
| {
 | |
| 	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
 | |
| 	struct st_lsm6dsx_hw *hw = sensor->hw;
 | |
| 
 | |
| 	if (!hw->settings->fifo_ops.update_fifo)
 | |
| 		return -ENOTSUPP;
 | |
| 
 | |
| 	return hw->settings->fifo_ops.update_fifo(sensor, true);
 | |
| }
 | |
| 
 | |
| static int st_lsm6dsx_buffer_postdisable(struct iio_dev *iio_dev)
 | |
| {
 | |
| 	struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev);
 | |
| 	struct st_lsm6dsx_hw *hw = sensor->hw;
 | |
| 
 | |
| 	if (!hw->settings->fifo_ops.update_fifo)
 | |
| 		return -ENOTSUPP;
 | |
| 
 | |
| 	return hw->settings->fifo_ops.update_fifo(sensor, false);
 | |
| }
 | |
| 
 | |
| static const struct iio_buffer_setup_ops st_lsm6dsx_buffer_ops = {
 | |
| 	.preenable = st_lsm6dsx_buffer_preenable,
 | |
| 	.postdisable = st_lsm6dsx_buffer_postdisable,
 | |
| };
 | |
| 
 | |
| int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw)
 | |
| {
 | |
| 	int i, ret;
 | |
| 
 | |
| 	for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
 | |
| 		if (!hw->iio_devs[i])
 | |
| 			continue;
 | |
| 
 | |
| 		ret = devm_iio_kfifo_buffer_setup(hw->dev, hw->iio_devs[i],
 | |
| 						  INDIO_BUFFER_SOFTWARE,
 | |
| 						  &st_lsm6dsx_buffer_ops);
 | |
| 		if (ret)
 | |
| 			return ret;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 |