289 lines
		
	
	
		
			6.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			289 lines
		
	
	
		
			6.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-or-later
 | |
| /*
 | |
|  * Freescale Vybrid vf610 DAC driver
 | |
|  *
 | |
|  * Copyright 2016 Toradex AG
 | |
|  */
 | |
| 
 | |
| #include <linux/clk.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| #include <linux/iio/iio.h>
 | |
| #include <linux/iio/sysfs.h>
 | |
| 
 | |
| #define VF610_DACx_STATCTRL		0x20
 | |
| 
 | |
| #define VF610_DAC_DACEN			BIT(15)
 | |
| #define VF610_DAC_DACRFS		BIT(14)
 | |
| #define VF610_DAC_LPEN			BIT(11)
 | |
| 
 | |
| #define VF610_DAC_DAT0(x)		((x) & 0xFFF)
 | |
| 
 | |
| enum vf610_conversion_mode_sel {
 | |
| 	VF610_DAC_CONV_HIGH_POWER,
 | |
| 	VF610_DAC_CONV_LOW_POWER,
 | |
| };
 | |
| 
 | |
| struct vf610_dac {
 | |
| 	struct clk *clk;
 | |
| 	struct device *dev;
 | |
| 	enum vf610_conversion_mode_sel conv_mode;
 | |
| 	void __iomem *regs;
 | |
| 	struct mutex lock;
 | |
| };
 | |
| 
 | |
| static void vf610_dac_init(struct vf610_dac *info)
 | |
| {
 | |
| 	int val;
 | |
| 
 | |
| 	info->conv_mode = VF610_DAC_CONV_LOW_POWER;
 | |
| 	val = VF610_DAC_DACEN | VF610_DAC_DACRFS |
 | |
| 		VF610_DAC_LPEN;
 | |
| 	writel(val, info->regs + VF610_DACx_STATCTRL);
 | |
| }
 | |
| 
 | |
| static void vf610_dac_exit(struct vf610_dac *info)
 | |
| {
 | |
| 	int val;
 | |
| 
 | |
| 	val = readl(info->regs + VF610_DACx_STATCTRL);
 | |
| 	val &= ~VF610_DAC_DACEN;
 | |
| 	writel(val, info->regs + VF610_DACx_STATCTRL);
 | |
| }
 | |
| 
 | |
| static int vf610_set_conversion_mode(struct iio_dev *indio_dev,
 | |
| 				const struct iio_chan_spec *chan,
 | |
| 				unsigned int mode)
 | |
| {
 | |
| 	struct vf610_dac *info = iio_priv(indio_dev);
 | |
| 	int val;
 | |
| 
 | |
| 	mutex_lock(&info->lock);
 | |
| 	info->conv_mode = mode;
 | |
| 	val = readl(info->regs + VF610_DACx_STATCTRL);
 | |
| 	if (mode)
 | |
| 		val |= VF610_DAC_LPEN;
 | |
| 	else
 | |
| 		val &= ~VF610_DAC_LPEN;
 | |
| 	writel(val, info->regs + VF610_DACx_STATCTRL);
 | |
| 	mutex_unlock(&info->lock);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vf610_get_conversion_mode(struct iio_dev *indio_dev,
 | |
| 				const struct iio_chan_spec *chan)
 | |
| {
 | |
| 	struct vf610_dac *info = iio_priv(indio_dev);
 | |
| 
 | |
| 	return info->conv_mode;
 | |
| }
 | |
| 
 | |
| static const char * const vf610_conv_modes[] = { "high-power", "low-power" };
 | |
| 
 | |
| static const struct iio_enum vf610_conversion_mode = {
 | |
| 	.items = vf610_conv_modes,
 | |
| 	.num_items = ARRAY_SIZE(vf610_conv_modes),
 | |
| 	.get = vf610_get_conversion_mode,
 | |
| 	.set = vf610_set_conversion_mode,
 | |
| };
 | |
| 
 | |
| static const struct iio_chan_spec_ext_info vf610_ext_info[] = {
 | |
| 	IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR,
 | |
| 		&vf610_conversion_mode),
 | |
| 	{},
 | |
| };
 | |
| 
 | |
| #define VF610_DAC_CHAN(_chan_type) { \
 | |
| 	.type = (_chan_type), \
 | |
| 	.output = 1, \
 | |
| 	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
 | |
| 	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
 | |
| 	.ext_info = vf610_ext_info, \
 | |
| }
 | |
| 
 | |
| static const struct iio_chan_spec vf610_dac_iio_channels[] = {
 | |
| 	VF610_DAC_CHAN(IIO_VOLTAGE),
 | |
| };
 | |
| 
 | |
| static int vf610_read_raw(struct iio_dev *indio_dev,
 | |
| 			struct iio_chan_spec const *chan,
 | |
| 			int *val, int *val2,
 | |
| 			long mask)
 | |
| {
 | |
| 	struct vf610_dac *info = iio_priv(indio_dev);
 | |
| 
 | |
| 	switch (mask) {
 | |
| 	case IIO_CHAN_INFO_RAW:
 | |
| 		*val = VF610_DAC_DAT0(readl(info->regs));
 | |
| 		return IIO_VAL_INT;
 | |
| 	case IIO_CHAN_INFO_SCALE:
 | |
| 		/*
 | |
| 		 * DACRFS is always 1 for valid reference and typical
 | |
| 		 * reference voltage as per Vybrid datasheet is 3.3V
 | |
| 		 * from section 9.1.2.1 of Vybrid datasheet
 | |
| 		 */
 | |
| 		*val = 3300 /* mV */;
 | |
| 		*val2 = 12;
 | |
| 		return IIO_VAL_FRACTIONAL_LOG2;
 | |
| 
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int vf610_write_raw(struct iio_dev *indio_dev,
 | |
| 			struct iio_chan_spec const *chan,
 | |
| 			int val, int val2,
 | |
| 			long mask)
 | |
| {
 | |
| 	struct vf610_dac *info = iio_priv(indio_dev);
 | |
| 
 | |
| 	switch (mask) {
 | |
| 	case IIO_CHAN_INFO_RAW:
 | |
| 		mutex_lock(&info->lock);
 | |
| 		writel(VF610_DAC_DAT0(val), info->regs);
 | |
| 		mutex_unlock(&info->lock);
 | |
| 		return 0;
 | |
| 
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static const struct iio_info vf610_dac_iio_info = {
 | |
| 	.read_raw = &vf610_read_raw,
 | |
| 	.write_raw = &vf610_write_raw,
 | |
| };
 | |
| 
 | |
| static const struct of_device_id vf610_dac_match[] = {
 | |
| 	{ .compatible = "fsl,vf610-dac", },
 | |
| 	{ /* sentinel */ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, vf610_dac_match);
 | |
| 
 | |
| static int vf610_dac_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct iio_dev *indio_dev;
 | |
| 	struct vf610_dac *info;
 | |
| 	int ret;
 | |
| 
 | |
| 	indio_dev = devm_iio_device_alloc(&pdev->dev,
 | |
| 					sizeof(struct vf610_dac));
 | |
| 	if (!indio_dev) {
 | |
| 		dev_err(&pdev->dev, "Failed allocating iio device\n");
 | |
| 		return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	info = iio_priv(indio_dev);
 | |
| 	info->dev = &pdev->dev;
 | |
| 
 | |
| 	info->regs = devm_platform_ioremap_resource(pdev, 0);
 | |
| 	if (IS_ERR(info->regs))
 | |
| 		return PTR_ERR(info->regs);
 | |
| 
 | |
| 	info->clk = devm_clk_get(&pdev->dev, "dac");
 | |
| 	if (IS_ERR(info->clk)) {
 | |
| 		dev_err(&pdev->dev, "Failed getting clock, err = %ld\n",
 | |
| 			PTR_ERR(info->clk));
 | |
| 		return PTR_ERR(info->clk);
 | |
| 	}
 | |
| 
 | |
| 	platform_set_drvdata(pdev, indio_dev);
 | |
| 
 | |
| 	indio_dev->name = dev_name(&pdev->dev);
 | |
| 	indio_dev->info = &vf610_dac_iio_info;
 | |
| 	indio_dev->modes = INDIO_DIRECT_MODE;
 | |
| 	indio_dev->channels = vf610_dac_iio_channels;
 | |
| 	indio_dev->num_channels = ARRAY_SIZE(vf610_dac_iio_channels);
 | |
| 
 | |
| 	mutex_init(&info->lock);
 | |
| 
 | |
| 	ret = clk_prepare_enable(info->clk);
 | |
| 	if (ret) {
 | |
| 		dev_err(&pdev->dev,
 | |
| 			"Could not prepare or enable the clock\n");
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	vf610_dac_init(info);
 | |
| 
 | |
| 	ret = iio_device_register(indio_dev);
 | |
| 	if (ret) {
 | |
| 		dev_err(&pdev->dev, "Couldn't register the device\n");
 | |
| 		goto error_iio_device_register;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| error_iio_device_register:
 | |
| 	vf610_dac_exit(info);
 | |
| 	clk_disable_unprepare(info->clk);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int vf610_dac_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 | |
| 	struct vf610_dac *info = iio_priv(indio_dev);
 | |
| 
 | |
| 	iio_device_unregister(indio_dev);
 | |
| 	vf610_dac_exit(info);
 | |
| 	clk_disable_unprepare(info->clk);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_PM_SLEEP
 | |
| static int vf610_dac_suspend(struct device *dev)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 | |
| 	struct vf610_dac *info = iio_priv(indio_dev);
 | |
| 
 | |
| 	vf610_dac_exit(info);
 | |
| 	clk_disable_unprepare(info->clk);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int vf610_dac_resume(struct device *dev)
 | |
| {
 | |
| 	struct iio_dev *indio_dev = dev_get_drvdata(dev);
 | |
| 	struct vf610_dac *info = iio_priv(indio_dev);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = clk_prepare_enable(info->clk);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	vf610_dac_init(info);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static SIMPLE_DEV_PM_OPS(vf610_dac_pm_ops, vf610_dac_suspend, vf610_dac_resume);
 | |
| 
 | |
| static struct platform_driver vf610_dac_driver = {
 | |
| 	.probe          = vf610_dac_probe,
 | |
| 	.remove         = vf610_dac_remove,
 | |
| 	.driver         = {
 | |
| 		.name   = "vf610-dac",
 | |
| 		.of_match_table = vf610_dac_match,
 | |
| 		.pm     = &vf610_dac_pm_ops,
 | |
| 	},
 | |
| };
 | |
| module_platform_driver(vf610_dac_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Sanchayan Maity <sanchayan.maity@toradex.com>");
 | |
| MODULE_DESCRIPTION("Freescale VF610 DAC driver");
 | |
| MODULE_LICENSE("GPL v2");
 |