224 lines
		
	
	
		
			4.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			224 lines
		
	
	
		
			4.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * MAX1241 low-power, 12-bit serial ADC
 | |
|  *
 | |
|  * Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX1240-MAX1241.pdf
 | |
|  */
 | |
| 
 | |
| #include <linux/delay.h>
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/iio/iio.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| #include <linux/spi/spi.h>
 | |
| 
 | |
| #define MAX1241_VAL_MASK GENMASK(11, 0)
 | |
| #define MAX1241_SHUTDOWN_DELAY_USEC 4
 | |
| 
 | |
| enum max1241_id {
 | |
| 	max1241,
 | |
| };
 | |
| 
 | |
| struct max1241 {
 | |
| 	struct spi_device *spi;
 | |
| 	struct mutex lock;
 | |
| 	struct regulator *vdd;
 | |
| 	struct regulator *vref;
 | |
| 	struct gpio_desc *shutdown;
 | |
| 
 | |
| 	__be16 data ____cacheline_aligned;
 | |
| };
 | |
| 
 | |
| static const struct iio_chan_spec max1241_channels[] = {
 | |
| 	{
 | |
| 		.type = IIO_VOLTAGE,
 | |
| 		.indexed = 1,
 | |
| 		.channel = 0,
 | |
| 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
 | |
| 				BIT(IIO_CHAN_INFO_SCALE),
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static int max1241_read(struct max1241 *adc)
 | |
| {
 | |
| 	struct spi_transfer xfers[] = {
 | |
| 		/*
 | |
| 		 * Begin conversion by bringing /CS low for at least
 | |
| 		 * tconv us.
 | |
| 		 */
 | |
| 		{
 | |
| 			.len = 0,
 | |
| 			.delay.value = 8,
 | |
| 			.delay.unit = SPI_DELAY_UNIT_USECS,
 | |
| 		},
 | |
| 		/*
 | |
| 		 * Then read two bytes of data in our RX buffer.
 | |
| 		 */
 | |
| 		{
 | |
| 			.rx_buf = &adc->data,
 | |
| 			.len = 2,
 | |
| 		},
 | |
| 	};
 | |
| 
 | |
| 	return spi_sync_transfer(adc->spi, xfers, ARRAY_SIZE(xfers));
 | |
| }
 | |
| 
 | |
| static int max1241_read_raw(struct iio_dev *indio_dev,
 | |
| 			struct iio_chan_spec const *chan,
 | |
| 			int *val, int *val2, long mask)
 | |
| {
 | |
| 	int ret, vref_uV;
 | |
| 	struct max1241 *adc = iio_priv(indio_dev);
 | |
| 
 | |
| 	switch (mask) {
 | |
| 	case IIO_CHAN_INFO_RAW:
 | |
| 		mutex_lock(&adc->lock);
 | |
| 
 | |
| 		if (adc->shutdown) {
 | |
| 			gpiod_set_value(adc->shutdown, 0);
 | |
| 			udelay(MAX1241_SHUTDOWN_DELAY_USEC);
 | |
| 			ret = max1241_read(adc);
 | |
| 			gpiod_set_value(adc->shutdown, 1);
 | |
| 		} else
 | |
| 			ret = max1241_read(adc);
 | |
| 
 | |
| 		if (ret) {
 | |
| 			mutex_unlock(&adc->lock);
 | |
| 			return ret;
 | |
| 		}
 | |
| 
 | |
| 		*val = (be16_to_cpu(adc->data) >> 3) & MAX1241_VAL_MASK;
 | |
| 
 | |
| 		mutex_unlock(&adc->lock);
 | |
| 		return IIO_VAL_INT;
 | |
| 	case IIO_CHAN_INFO_SCALE:
 | |
| 		vref_uV = regulator_get_voltage(adc->vref);
 | |
| 
 | |
| 		if (vref_uV < 0)
 | |
| 			return vref_uV;
 | |
| 
 | |
| 		*val = vref_uV / 1000;
 | |
| 		*val2 = 12;
 | |
| 
 | |
| 		return IIO_VAL_FRACTIONAL_LOG2;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static const struct iio_info max1241_info = {
 | |
| 	.read_raw = max1241_read_raw,
 | |
| };
 | |
| 
 | |
| static void max1241_disable_vdd_action(void *data)
 | |
| {
 | |
| 	struct max1241 *adc = data;
 | |
| 	struct device *dev = &adc->spi->dev;
 | |
| 	int err;
 | |
| 
 | |
| 	err = regulator_disable(adc->vdd);
 | |
| 	if (err)
 | |
| 		dev_err(dev, "could not disable vdd regulator.\n");
 | |
| }
 | |
| 
 | |
| static void max1241_disable_vref_action(void *data)
 | |
| {
 | |
| 	struct max1241 *adc = data;
 | |
| 	struct device *dev = &adc->spi->dev;
 | |
| 	int err;
 | |
| 
 | |
| 	err = regulator_disable(adc->vref);
 | |
| 	if (err)
 | |
| 		dev_err(dev, "could not disable vref regulator.\n");
 | |
| }
 | |
| 
 | |
| static int max1241_probe(struct spi_device *spi)
 | |
| {
 | |
| 	struct device *dev = &spi->dev;
 | |
| 	struct iio_dev *indio_dev;
 | |
| 	struct max1241 *adc;
 | |
| 	int ret;
 | |
| 
 | |
| 	indio_dev = devm_iio_device_alloc(dev, sizeof(*adc));
 | |
| 	if (!indio_dev)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	adc = iio_priv(indio_dev);
 | |
| 	adc->spi = spi;
 | |
| 	mutex_init(&adc->lock);
 | |
| 
 | |
| 	adc->vdd = devm_regulator_get(dev, "vdd");
 | |
| 	if (IS_ERR(adc->vdd))
 | |
| 		return dev_err_probe(dev, PTR_ERR(adc->vdd),
 | |
| 				     "failed to get vdd regulator\n");
 | |
| 
 | |
| 	ret = regulator_enable(adc->vdd);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = devm_add_action_or_reset(dev, max1241_disable_vdd_action, adc);
 | |
| 	if (ret) {
 | |
| 		dev_err(dev, "could not set up vdd regulator cleanup action\n");
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	adc->vref = devm_regulator_get(dev, "vref");
 | |
| 	if (IS_ERR(adc->vref))
 | |
| 		return dev_err_probe(dev, PTR_ERR(adc->vref),
 | |
| 				     "failed to get vref regulator\n");
 | |
| 
 | |
| 	ret = regulator_enable(adc->vref);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = devm_add_action_or_reset(dev, max1241_disable_vref_action, adc);
 | |
| 	if (ret) {
 | |
| 		dev_err(dev, "could not set up vref regulator cleanup action\n");
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	adc->shutdown = devm_gpiod_get_optional(dev, "shutdown",
 | |
| 						GPIOD_OUT_HIGH);
 | |
| 	if (IS_ERR(adc->shutdown))
 | |
| 		return dev_err_probe(dev, PTR_ERR(adc->shutdown),
 | |
| 				     "cannot get shutdown gpio\n");
 | |
| 
 | |
| 	if (adc->shutdown)
 | |
| 		dev_dbg(dev, "shutdown pin passed, low-power mode enabled");
 | |
| 	else
 | |
| 		dev_dbg(dev, "no shutdown pin passed, low-power mode disabled");
 | |
| 
 | |
| 	indio_dev->name = spi_get_device_id(spi)->name;
 | |
| 	indio_dev->info = &max1241_info;
 | |
| 	indio_dev->modes = INDIO_DIRECT_MODE;
 | |
| 	indio_dev->channels = max1241_channels;
 | |
| 	indio_dev->num_channels = ARRAY_SIZE(max1241_channels);
 | |
| 
 | |
| 	return devm_iio_device_register(dev, indio_dev);
 | |
| }
 | |
| 
 | |
| static const struct spi_device_id max1241_id[] = {
 | |
| 	{ "max1241", max1241 },
 | |
| 	{}
 | |
| };
 | |
| 
 | |
| static const struct of_device_id max1241_dt_ids[] = {
 | |
| 	{ .compatible = "maxim,max1241" },
 | |
| 	{}
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, max1241_dt_ids);
 | |
| 
 | |
| static struct spi_driver max1241_spi_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "max1241",
 | |
| 		.of_match_table = max1241_dt_ids,
 | |
| 	},
 | |
| 	.probe = max1241_probe,
 | |
| 	.id_table = max1241_id,
 | |
| };
 | |
| module_spi_driver(max1241_spi_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Alexandru Lazar <alazar@startmail.com>");
 | |
| MODULE_DESCRIPTION("MAX1241 ADC driver");
 | |
| MODULE_LICENSE("GPL v2");
 |