499 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			499 lines
		
	
	
		
			14 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  *  Copyright Intel Corporation (C) 2017.
 | |
|  *
 | |
|  * Based on the i2c-axxia.c driver.
 | |
|  */
 | |
| #include <linux/clk.h>
 | |
| #include <linux/clkdev.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/iopoll.h>
 | |
| #include <linux/interrupt.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/kernel.h>
 | |
| #include <linux/platform_device.h>
 | |
| 
 | |
| #define ALTR_I2C_TFR_CMD	0x00	/* Transfer Command register */
 | |
| #define     ALTR_I2C_TFR_CMD_STA	BIT(9)	/* send START before byte */
 | |
| #define     ALTR_I2C_TFR_CMD_STO	BIT(8)	/* send STOP after byte */
 | |
| #define     ALTR_I2C_TFR_CMD_RW_D	BIT(0)	/* Direction of transfer */
 | |
| #define ALTR_I2C_RX_DATA	0x04	/* RX data FIFO register */
 | |
| #define ALTR_I2C_CTRL		0x08	/* Control register */
 | |
| #define     ALTR_I2C_CTRL_RXT_SHFT	4	/* RX FIFO Threshold */
 | |
| #define     ALTR_I2C_CTRL_TCT_SHFT	2	/* TFER CMD FIFO Threshold */
 | |
| #define     ALTR_I2C_CTRL_BSPEED	BIT(1)	/* Bus Speed (1=Fast) */
 | |
| #define     ALTR_I2C_CTRL_EN	BIT(0)	/* Enable Core (1=Enable) */
 | |
| #define ALTR_I2C_ISER		0x0C	/* Interrupt Status Enable register */
 | |
| #define     ALTR_I2C_ISER_RXOF_EN	BIT(4)	/* Enable RX OVERFLOW IRQ */
 | |
| #define     ALTR_I2C_ISER_ARB_EN	BIT(3)	/* Enable ARB LOST IRQ */
 | |
| #define     ALTR_I2C_ISER_NACK_EN	BIT(2)	/* Enable NACK DET IRQ */
 | |
| #define     ALTR_I2C_ISER_RXRDY_EN	BIT(1)	/* Enable RX Ready IRQ */
 | |
| #define     ALTR_I2C_ISER_TXRDY_EN	BIT(0)	/* Enable TX Ready IRQ */
 | |
| #define ALTR_I2C_ISR		0x10	/* Interrupt Status register */
 | |
| #define     ALTR_I2C_ISR_RXOF		BIT(4)	/* RX OVERFLOW IRQ */
 | |
| #define     ALTR_I2C_ISR_ARB		BIT(3)	/* ARB LOST IRQ */
 | |
| #define     ALTR_I2C_ISR_NACK		BIT(2)	/* NACK DET IRQ */
 | |
| #define     ALTR_I2C_ISR_RXRDY		BIT(1)	/* RX Ready IRQ */
 | |
| #define     ALTR_I2C_ISR_TXRDY		BIT(0)	/* TX Ready IRQ */
 | |
| #define ALTR_I2C_STATUS		0x14	/* Status register */
 | |
| #define     ALTR_I2C_STAT_CORE		BIT(0)	/* Core Status (0=idle) */
 | |
| #define ALTR_I2C_TC_FIFO_LVL	0x18	/* Transfer FIFO LVL register */
 | |
| #define ALTR_I2C_RX_FIFO_LVL	0x1C	/* Receive FIFO LVL register */
 | |
| #define ALTR_I2C_SCL_LOW	0x20	/* SCL low count register */
 | |
| #define ALTR_I2C_SCL_HIGH	0x24	/* SCL high count register */
 | |
| #define ALTR_I2C_SDA_HOLD	0x28	/* SDA hold count register */
 | |
| 
 | |
| #define ALTR_I2C_ALL_IRQ	(ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | \
 | |
| 				 ALTR_I2C_ISR_NACK | ALTR_I2C_ISR_RXRDY | \
 | |
| 				 ALTR_I2C_ISR_TXRDY)
 | |
| 
 | |
| #define ALTR_I2C_THRESHOLD	0	/* IRQ Threshold at 1 element */
 | |
| #define ALTR_I2C_DFLT_FIFO_SZ	4
 | |
| #define ALTR_I2C_TIMEOUT	100000	/* 100ms */
 | |
| #define ALTR_I2C_XFER_TIMEOUT	(msecs_to_jiffies(250))
 | |
| 
 | |
| /**
 | |
|  * struct altr_i2c_dev - I2C device context
 | |
|  * @base: pointer to register struct
 | |
|  * @msg: pointer to current message
 | |
|  * @msg_len: number of bytes transferred in msg
 | |
|  * @msg_err: error code for completed message
 | |
|  * @msg_complete: xfer completion object
 | |
|  * @dev: device reference
 | |
|  * @adapter: core i2c abstraction
 | |
|  * @i2c_clk: clock reference for i2c input clock
 | |
|  * @bus_clk_rate: current i2c bus clock rate
 | |
|  * @buf: ptr to msg buffer for easier use.
 | |
|  * @fifo_size: size of the FIFO passed in.
 | |
|  * @isr_mask: cached copy of local ISR enables.
 | |
|  * @isr_status: cached copy of local ISR status.
 | |
|  * @isr_mutex: mutex for IRQ thread.
 | |
|  */
 | |
| struct altr_i2c_dev {
 | |
| 	void __iomem *base;
 | |
| 	struct i2c_msg *msg;
 | |
| 	size_t msg_len;
 | |
| 	int msg_err;
 | |
| 	struct completion msg_complete;
 | |
| 	struct device *dev;
 | |
| 	struct i2c_adapter adapter;
 | |
| 	struct clk *i2c_clk;
 | |
| 	u32 bus_clk_rate;
 | |
| 	u8 *buf;
 | |
| 	u32 fifo_size;
 | |
| 	u32 isr_mask;
 | |
| 	u32 isr_status;
 | |
| 	struct mutex isr_mutex;
 | |
| };
 | |
| 
 | |
| static void
 | |
| altr_i2c_int_enable(struct altr_i2c_dev *idev, u32 mask, bool enable)
 | |
| {
 | |
| 	u32 int_en;
 | |
| 
 | |
| 	int_en = readl(idev->base + ALTR_I2C_ISER);
 | |
| 	if (enable)
 | |
| 		idev->isr_mask = int_en | mask;
 | |
| 	else
 | |
| 		idev->isr_mask = int_en & ~mask;
 | |
| 
 | |
| 	writel(idev->isr_mask, idev->base + ALTR_I2C_ISER);
 | |
| }
 | |
| 
 | |
| static void altr_i2c_int_clear(struct altr_i2c_dev *idev, u32 mask)
 | |
| {
 | |
| 	u32 int_en = readl(idev->base + ALTR_I2C_ISR);
 | |
| 
 | |
| 	writel(int_en | mask, idev->base + ALTR_I2C_ISR);
 | |
| }
 | |
| 
 | |
| static void altr_i2c_core_disable(struct altr_i2c_dev *idev)
 | |
| {
 | |
| 	u32 tmp = readl(idev->base + ALTR_I2C_CTRL);
 | |
| 
 | |
| 	writel(tmp & ~ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL);
 | |
| }
 | |
| 
 | |
| static void altr_i2c_core_enable(struct altr_i2c_dev *idev)
 | |
| {
 | |
| 	u32 tmp = readl(idev->base + ALTR_I2C_CTRL);
 | |
| 
 | |
| 	writel(tmp | ALTR_I2C_CTRL_EN, idev->base + ALTR_I2C_CTRL);
 | |
| }
 | |
| 
 | |
| static void altr_i2c_reset(struct altr_i2c_dev *idev)
 | |
| {
 | |
| 	altr_i2c_core_disable(idev);
 | |
| 	altr_i2c_core_enable(idev);
 | |
| }
 | |
| 
 | |
| static inline void altr_i2c_stop(struct altr_i2c_dev *idev)
 | |
| {
 | |
| 	writel(ALTR_I2C_TFR_CMD_STO, idev->base + ALTR_I2C_TFR_CMD);
 | |
| }
 | |
| 
 | |
| static void altr_i2c_init(struct altr_i2c_dev *idev)
 | |
| {
 | |
| 	u32 divisor = clk_get_rate(idev->i2c_clk) / idev->bus_clk_rate;
 | |
| 	u32 clk_mhz = clk_get_rate(idev->i2c_clk) / 1000000;
 | |
| 	u32 tmp = (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_RXT_SHFT) |
 | |
| 		  (ALTR_I2C_THRESHOLD << ALTR_I2C_CTRL_TCT_SHFT);
 | |
| 	u32 t_high, t_low;
 | |
| 
 | |
| 	if (idev->bus_clk_rate <= I2C_MAX_STANDARD_MODE_FREQ) {
 | |
| 		tmp &= ~ALTR_I2C_CTRL_BSPEED;
 | |
| 		/* Standard mode SCL 50/50 */
 | |
| 		t_high = divisor * 1 / 2;
 | |
| 		t_low = divisor * 1 / 2;
 | |
| 	} else {
 | |
| 		tmp |= ALTR_I2C_CTRL_BSPEED;
 | |
| 		/* Fast mode SCL 33/66 */
 | |
| 		t_high = divisor * 1 / 3;
 | |
| 		t_low = divisor * 2 / 3;
 | |
| 	}
 | |
| 	writel(tmp, idev->base + ALTR_I2C_CTRL);
 | |
| 
 | |
| 	dev_dbg(idev->dev, "rate=%uHz per_clk=%uMHz -> ratio=1:%u\n",
 | |
| 		idev->bus_clk_rate, clk_mhz, divisor);
 | |
| 
 | |
| 	/* Reset controller */
 | |
| 	altr_i2c_reset(idev);
 | |
| 
 | |
| 	/* SCL High Time */
 | |
| 	writel(t_high, idev->base + ALTR_I2C_SCL_HIGH);
 | |
| 	/* SCL Low Time */
 | |
| 	writel(t_low, idev->base + ALTR_I2C_SCL_LOW);
 | |
| 	/* SDA Hold Time, 300ns */
 | |
| 	writel(3 * clk_mhz / 10, idev->base + ALTR_I2C_SDA_HOLD);
 | |
| 
 | |
| 	/* Mask all master interrupt bits */
 | |
| 	altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * altr_i2c_transfer - On the last byte to be transmitted, send
 | |
|  * a Stop bit on the last byte.
 | |
|  */
 | |
| static void altr_i2c_transfer(struct altr_i2c_dev *idev, u32 data)
 | |
| {
 | |
| 	/* On the last byte to be transmitted, send STOP */
 | |
| 	if (idev->msg_len == 1)
 | |
| 		data |= ALTR_I2C_TFR_CMD_STO;
 | |
| 	if (idev->msg_len > 0)
 | |
| 		writel(data, idev->base + ALTR_I2C_TFR_CMD);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * altr_i2c_empty_rx_fifo - Fetch data from RX FIFO until end of
 | |
|  * transfer. Send a Stop bit on the last byte.
 | |
|  */
 | |
| static void altr_i2c_empty_rx_fifo(struct altr_i2c_dev *idev)
 | |
| {
 | |
| 	size_t rx_fifo_avail = readl(idev->base + ALTR_I2C_RX_FIFO_LVL);
 | |
| 	int bytes_to_transfer = min(rx_fifo_avail, idev->msg_len);
 | |
| 
 | |
| 	while (bytes_to_transfer-- > 0) {
 | |
| 		*idev->buf++ = readl(idev->base + ALTR_I2C_RX_DATA);
 | |
| 		idev->msg_len--;
 | |
| 		altr_i2c_transfer(idev, 0);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * altr_i2c_fill_tx_fifo - Fill TX FIFO from current message buffer.
 | |
|  */
 | |
| static int altr_i2c_fill_tx_fifo(struct altr_i2c_dev *idev)
 | |
| {
 | |
| 	size_t tx_fifo_avail = idev->fifo_size - readl(idev->base +
 | |
| 						       ALTR_I2C_TC_FIFO_LVL);
 | |
| 	int bytes_to_transfer = min(tx_fifo_avail, idev->msg_len);
 | |
| 	int ret = idev->msg_len - bytes_to_transfer;
 | |
| 
 | |
| 	while (bytes_to_transfer-- > 0) {
 | |
| 		altr_i2c_transfer(idev, *idev->buf++);
 | |
| 		idev->msg_len--;
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static irqreturn_t altr_i2c_isr_quick(int irq, void *_dev)
 | |
| {
 | |
| 	struct altr_i2c_dev *idev = _dev;
 | |
| 	irqreturn_t ret = IRQ_HANDLED;
 | |
| 
 | |
| 	/* Read IRQ status but only interested in Enabled IRQs. */
 | |
| 	idev->isr_status = readl(idev->base + ALTR_I2C_ISR) & idev->isr_mask;
 | |
| 	if (idev->isr_status)
 | |
| 		ret = IRQ_WAKE_THREAD;
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static irqreturn_t altr_i2c_isr(int irq, void *_dev)
 | |
| {
 | |
| 	int ret;
 | |
| 	bool read, finish = false;
 | |
| 	struct altr_i2c_dev *idev = _dev;
 | |
| 	u32 status = idev->isr_status;
 | |
| 
 | |
| 	mutex_lock(&idev->isr_mutex);
 | |
| 	if (!idev->msg) {
 | |
| 		dev_warn(idev->dev, "unexpected interrupt\n");
 | |
| 		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
 | |
| 		goto out;
 | |
| 	}
 | |
| 	read = (idev->msg->flags & I2C_M_RD) != 0;
 | |
| 
 | |
| 	/* handle Lost Arbitration */
 | |
| 	if (unlikely(status & ALTR_I2C_ISR_ARB)) {
 | |
| 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_ARB);
 | |
| 		idev->msg_err = -EAGAIN;
 | |
| 		finish = true;
 | |
| 	} else if (unlikely(status & ALTR_I2C_ISR_NACK)) {
 | |
| 		dev_dbg(idev->dev, "Could not get ACK\n");
 | |
| 		idev->msg_err = -ENXIO;
 | |
| 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_NACK);
 | |
| 		altr_i2c_stop(idev);
 | |
| 		finish = true;
 | |
| 	} else if (read && unlikely(status & ALTR_I2C_ISR_RXOF)) {
 | |
| 		/* handle RX FIFO Overflow */
 | |
| 		altr_i2c_empty_rx_fifo(idev);
 | |
| 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY);
 | |
| 		altr_i2c_stop(idev);
 | |
| 		dev_err(idev->dev, "RX FIFO Overflow\n");
 | |
| 		finish = true;
 | |
| 	} else if (read && (status & ALTR_I2C_ISR_RXRDY)) {
 | |
| 		/* RX FIFO needs service? */
 | |
| 		altr_i2c_empty_rx_fifo(idev);
 | |
| 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_RXRDY);
 | |
| 		if (!idev->msg_len)
 | |
| 			finish = true;
 | |
| 	} else if (!read && (status & ALTR_I2C_ISR_TXRDY)) {
 | |
| 		/* TX FIFO needs service? */
 | |
| 		altr_i2c_int_clear(idev, ALTR_I2C_ISR_TXRDY);
 | |
| 		if (idev->msg_len > 0)
 | |
| 			altr_i2c_fill_tx_fifo(idev);
 | |
| 		else
 | |
| 			finish = true;
 | |
| 	} else {
 | |
| 		dev_warn(idev->dev, "Unexpected interrupt: 0x%x\n", status);
 | |
| 		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
 | |
| 	}
 | |
| 
 | |
| 	if (finish) {
 | |
| 		/* Wait for the Core to finish */
 | |
| 		ret = readl_poll_timeout_atomic(idev->base + ALTR_I2C_STATUS,
 | |
| 						status,
 | |
| 						!(status & ALTR_I2C_STAT_CORE),
 | |
| 						1, ALTR_I2C_TIMEOUT);
 | |
| 		if (ret)
 | |
| 			dev_err(idev->dev, "message timeout\n");
 | |
| 		altr_i2c_int_enable(idev, ALTR_I2C_ALL_IRQ, false);
 | |
| 		altr_i2c_int_clear(idev, ALTR_I2C_ALL_IRQ);
 | |
| 		complete(&idev->msg_complete);
 | |
| 		dev_dbg(idev->dev, "Message Complete\n");
 | |
| 	}
 | |
| out:
 | |
| 	mutex_unlock(&idev->isr_mutex);
 | |
| 
 | |
| 	return IRQ_HANDLED;
 | |
| }
 | |
| 
 | |
| static int altr_i2c_xfer_msg(struct altr_i2c_dev *idev, struct i2c_msg *msg)
 | |
| {
 | |
| 	u32 imask = ALTR_I2C_ISR_RXOF | ALTR_I2C_ISR_ARB | ALTR_I2C_ISR_NACK;
 | |
| 	unsigned long time_left;
 | |
| 	u32 value;
 | |
| 	u8 addr = i2c_8bit_addr_from_msg(msg);
 | |
| 
 | |
| 	mutex_lock(&idev->isr_mutex);
 | |
| 	idev->msg = msg;
 | |
| 	idev->msg_len = msg->len;
 | |
| 	idev->buf = msg->buf;
 | |
| 	idev->msg_err = 0;
 | |
| 	reinit_completion(&idev->msg_complete);
 | |
| 	altr_i2c_core_enable(idev);
 | |
| 
 | |
| 	/* Make sure RX FIFO is empty */
 | |
| 	do {
 | |
| 		readl(idev->base + ALTR_I2C_RX_DATA);
 | |
| 	} while (readl(idev->base + ALTR_I2C_RX_FIFO_LVL));
 | |
| 
 | |
| 	writel(ALTR_I2C_TFR_CMD_STA | addr, idev->base + ALTR_I2C_TFR_CMD);
 | |
| 
 | |
| 	if ((msg->flags & I2C_M_RD) != 0) {
 | |
| 		imask |= ALTR_I2C_ISER_RXOF_EN | ALTR_I2C_ISER_RXRDY_EN;
 | |
| 		altr_i2c_int_enable(idev, imask, true);
 | |
| 		/* write the first byte to start the RX */
 | |
| 		altr_i2c_transfer(idev, 0);
 | |
| 	} else {
 | |
| 		imask |= ALTR_I2C_ISR_TXRDY;
 | |
| 		altr_i2c_int_enable(idev, imask, true);
 | |
| 		altr_i2c_fill_tx_fifo(idev);
 | |
| 	}
 | |
| 	mutex_unlock(&idev->isr_mutex);
 | |
| 
 | |
| 	time_left = wait_for_completion_timeout(&idev->msg_complete,
 | |
| 						ALTR_I2C_XFER_TIMEOUT);
 | |
| 	mutex_lock(&idev->isr_mutex);
 | |
| 	altr_i2c_int_enable(idev, imask, false);
 | |
| 
 | |
| 	value = readl(idev->base + ALTR_I2C_STATUS) & ALTR_I2C_STAT_CORE;
 | |
| 	if (value)
 | |
| 		dev_err(idev->dev, "Core Status not IDLE...\n");
 | |
| 
 | |
| 	if (time_left == 0) {
 | |
| 		idev->msg_err = -ETIMEDOUT;
 | |
| 		dev_dbg(idev->dev, "Transaction timed out.\n");
 | |
| 	}
 | |
| 
 | |
| 	altr_i2c_core_disable(idev);
 | |
| 	mutex_unlock(&idev->isr_mutex);
 | |
| 
 | |
| 	return idev->msg_err;
 | |
| }
 | |
| 
 | |
| static int
 | |
| altr_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 | |
| {
 | |
| 	struct altr_i2c_dev *idev = i2c_get_adapdata(adap);
 | |
| 	int i, ret;
 | |
| 
 | |
| 	for (i = 0; i < num; i++) {
 | |
| 		ret = altr_i2c_xfer_msg(idev, msgs++);
 | |
| 		if (ret)
 | |
| 			return ret;
 | |
| 	}
 | |
| 	return num;
 | |
| }
 | |
| 
 | |
| static u32 altr_i2c_func(struct i2c_adapter *adap)
 | |
| {
 | |
| 	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
 | |
| }
 | |
| 
 | |
| static const struct i2c_algorithm altr_i2c_algo = {
 | |
| 	.master_xfer = altr_i2c_xfer,
 | |
| 	.functionality = altr_i2c_func,
 | |
| };
 | |
| 
 | |
| static int altr_i2c_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct altr_i2c_dev *idev = NULL;
 | |
| 	int irq, ret;
 | |
| 
 | |
| 	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
 | |
| 	if (!idev)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	idev->base = devm_platform_ioremap_resource(pdev, 0);
 | |
| 	if (IS_ERR(idev->base))
 | |
| 		return PTR_ERR(idev->base);
 | |
| 
 | |
| 	irq = platform_get_irq(pdev, 0);
 | |
| 	if (irq < 0)
 | |
| 		return irq;
 | |
| 
 | |
| 	idev->i2c_clk = devm_clk_get(&pdev->dev, NULL);
 | |
| 	if (IS_ERR(idev->i2c_clk)) {
 | |
| 		dev_err(&pdev->dev, "missing clock\n");
 | |
| 		return PTR_ERR(idev->i2c_clk);
 | |
| 	}
 | |
| 
 | |
| 	idev->dev = &pdev->dev;
 | |
| 	init_completion(&idev->msg_complete);
 | |
| 	mutex_init(&idev->isr_mutex);
 | |
| 
 | |
| 	ret = device_property_read_u32(idev->dev, "fifo-size",
 | |
| 				       &idev->fifo_size);
 | |
| 	if (ret) {
 | |
| 		dev_err(&pdev->dev, "FIFO size set to default of %d\n",
 | |
| 			ALTR_I2C_DFLT_FIFO_SZ);
 | |
| 		idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ;
 | |
| 	}
 | |
| 
 | |
| 	ret = device_property_read_u32(idev->dev, "clock-frequency",
 | |
| 				       &idev->bus_clk_rate);
 | |
| 	if (ret) {
 | |
| 		dev_err(&pdev->dev, "Default to 100kHz\n");
 | |
| 		idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;	/* default clock rate */
 | |
| 	}
 | |
| 
 | |
| 	if (idev->bus_clk_rate > I2C_MAX_FAST_MODE_FREQ) {
 | |
| 		dev_err(&pdev->dev, "invalid clock-frequency %d\n",
 | |
| 			idev->bus_clk_rate);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	ret = devm_request_threaded_irq(&pdev->dev, irq, altr_i2c_isr_quick,
 | |
| 					altr_i2c_isr, IRQF_ONESHOT,
 | |
| 					pdev->name, idev);
 | |
| 	if (ret) {
 | |
| 		dev_err(&pdev->dev, "failed to claim IRQ %d\n", irq);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = clk_prepare_enable(idev->i2c_clk);
 | |
| 	if (ret) {
 | |
| 		dev_err(&pdev->dev, "failed to enable clock\n");
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	mutex_lock(&idev->isr_mutex);
 | |
| 	altr_i2c_init(idev);
 | |
| 	mutex_unlock(&idev->isr_mutex);
 | |
| 
 | |
| 	i2c_set_adapdata(&idev->adapter, idev);
 | |
| 	strscpy(idev->adapter.name, pdev->name, sizeof(idev->adapter.name));
 | |
| 	idev->adapter.owner = THIS_MODULE;
 | |
| 	idev->adapter.algo = &altr_i2c_algo;
 | |
| 	idev->adapter.dev.parent = &pdev->dev;
 | |
| 	idev->adapter.dev.of_node = pdev->dev.of_node;
 | |
| 
 | |
| 	platform_set_drvdata(pdev, idev);
 | |
| 
 | |
| 	ret = i2c_add_adapter(&idev->adapter);
 | |
| 	if (ret) {
 | |
| 		clk_disable_unprepare(idev->i2c_clk);
 | |
| 		return ret;
 | |
| 	}
 | |
| 	dev_info(&pdev->dev, "Altera SoftIP I2C Probe Complete\n");
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int altr_i2c_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct altr_i2c_dev *idev = platform_get_drvdata(pdev);
 | |
| 
 | |
| 	clk_disable_unprepare(idev->i2c_clk);
 | |
| 	i2c_del_adapter(&idev->adapter);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Match table for of_platform binding */
 | |
| static const struct of_device_id altr_i2c_of_match[] = {
 | |
| 	{ .compatible = "altr,softip-i2c-v1.0" },
 | |
| 	{},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, altr_i2c_of_match);
 | |
| 
 | |
| static struct platform_driver altr_i2c_driver = {
 | |
| 	.probe = altr_i2c_probe,
 | |
| 	.remove = altr_i2c_remove,
 | |
| 	.driver = {
 | |
| 		.name = "altera-i2c",
 | |
| 		.of_match_table = altr_i2c_of_match,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| module_platform_driver(altr_i2c_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("Altera Soft IP I2C bus driver");
 | |
| MODULE_AUTHOR("Thor Thayer <thor.thayer@linux.intel.com>");
 | |
| MODULE_LICENSE("GPL v2");
 |