307 lines
		
	
	
		
			6.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			307 lines
		
	
	
		
			6.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-or-later
 | |
| /*
 | |
|  * Copyright (C) 2017 IBM Corp.
 | |
|  *
 | |
|  * Driver for the Nuvoton W83773G SMBus temperature sensor IC.
 | |
|  * Supported models: W83773G
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/hwmon.h>
 | |
| #include <linux/hwmon-sysfs.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/of_device.h>
 | |
| #include <linux/regmap.h>
 | |
| 
 | |
| /* W83773 has 3 channels */
 | |
| #define W83773_CHANNELS				3
 | |
| 
 | |
| /* The W83773 registers */
 | |
| #define W83773_CONVERSION_RATE_REG_READ		0x04
 | |
| #define W83773_CONVERSION_RATE_REG_WRITE	0x0A
 | |
| #define W83773_MANUFACTURER_ID_REG		0xFE
 | |
| #define W83773_LOCAL_TEMP			0x00
 | |
| 
 | |
| static const u8 W83773_STATUS[2] = { 0x02, 0x17 };
 | |
| 
 | |
| static const u8 W83773_TEMP_LSB[2] = { 0x10, 0x25 };
 | |
| static const u8 W83773_TEMP_MSB[2] = { 0x01, 0x24 };
 | |
| 
 | |
| static const u8 W83773_OFFSET_LSB[2] = { 0x12, 0x16 };
 | |
| static const u8 W83773_OFFSET_MSB[2] = { 0x11, 0x15 };
 | |
| 
 | |
| /* this is the number of sensors in the device */
 | |
| static const struct i2c_device_id w83773_id[] = {
 | |
| 	{ "w83773g" },
 | |
| 	{ }
 | |
| };
 | |
| 
 | |
| MODULE_DEVICE_TABLE(i2c, w83773_id);
 | |
| 
 | |
| static const struct of_device_id __maybe_unused w83773_of_match[] = {
 | |
| 	{
 | |
| 		.compatible = "nuvoton,w83773g"
 | |
| 	},
 | |
| 	{ },
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, w83773_of_match);
 | |
| 
 | |
| static inline long temp_of_local(s8 reg)
 | |
| {
 | |
| 	return reg * 1000;
 | |
| }
 | |
| 
 | |
| static inline long temp_of_remote(s8 hb, u8 lb)
 | |
| {
 | |
| 	return (hb << 3 | lb >> 5) * 125;
 | |
| }
 | |
| 
 | |
| static int get_local_temp(struct regmap *regmap, long *val)
 | |
| {
 | |
| 	unsigned int regval;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_read(regmap, W83773_LOCAL_TEMP, ®val);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	*val = temp_of_local(regval);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int get_remote_temp(struct regmap *regmap, int index, long *val)
 | |
| {
 | |
| 	unsigned int regval_high;
 | |
| 	unsigned int regval_low;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_read(regmap, W83773_TEMP_MSB[index], ®val_high);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = regmap_read(regmap, W83773_TEMP_LSB[index], ®val_low);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	*val = temp_of_remote(regval_high, regval_low);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int get_fault(struct regmap *regmap, int index, long *val)
 | |
| {
 | |
| 	unsigned int regval;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_read(regmap, W83773_STATUS[index], ®val);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	*val = (regval & 0x04) >> 2;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int get_offset(struct regmap *regmap, int index, long *val)
 | |
| {
 | |
| 	unsigned int regval_high;
 | |
| 	unsigned int regval_low;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_read(regmap, W83773_OFFSET_MSB[index], ®val_high);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = regmap_read(regmap, W83773_OFFSET_LSB[index], ®val_low);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	*val = temp_of_remote(regval_high, regval_low);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int set_offset(struct regmap *regmap, int index, long val)
 | |
| {
 | |
| 	int ret;
 | |
| 	u8 high_byte;
 | |
| 	u8 low_byte;
 | |
| 
 | |
| 	val = clamp_val(val, -127825, 127825);
 | |
| 	/* offset value equals to (high_byte << 3 | low_byte >> 5) * 125 */
 | |
| 	val /= 125;
 | |
| 	high_byte = val >> 3;
 | |
| 	low_byte = (val & 0x07) << 5;
 | |
| 
 | |
| 	ret = regmap_write(regmap, W83773_OFFSET_MSB[index], high_byte);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	return regmap_write(regmap, W83773_OFFSET_LSB[index], low_byte);
 | |
| }
 | |
| 
 | |
| static int get_update_interval(struct regmap *regmap, long *val)
 | |
| {
 | |
| 	unsigned int regval;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regmap_read(regmap, W83773_CONVERSION_RATE_REG_READ, ®val);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	*val = 16000 >> regval;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int set_update_interval(struct regmap *regmap, long val)
 | |
| {
 | |
| 	int rate;
 | |
| 
 | |
| 	/*
 | |
| 	 * For valid rates, interval can be calculated as
 | |
| 	 *	interval = (1 << (8 - rate)) * 62.5;
 | |
| 	 * Rounded rate is therefore
 | |
| 	 *	rate = 8 - __fls(interval * 8 / (62.5 * 7));
 | |
| 	 * Use clamp_val() to avoid overflows, and to ensure valid input
 | |
| 	 * for __fls.
 | |
| 	 */
 | |
| 	val = clamp_val(val, 62, 16000) * 10;
 | |
| 	rate = 8 - __fls((val * 8 / (625 * 7)));
 | |
| 	return regmap_write(regmap, W83773_CONVERSION_RATE_REG_WRITE, rate);
 | |
| }
 | |
| 
 | |
| static int w83773_read(struct device *dev, enum hwmon_sensor_types type,
 | |
| 		       u32 attr, int channel, long *val)
 | |
| {
 | |
| 	struct regmap *regmap = dev_get_drvdata(dev);
 | |
| 
 | |
| 	if (type == hwmon_chip) {
 | |
| 		if (attr == hwmon_chip_update_interval)
 | |
| 			return get_update_interval(regmap, val);
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| 
 | |
| 	switch (attr) {
 | |
| 	case hwmon_temp_input:
 | |
| 		if (channel == 0)
 | |
| 			return get_local_temp(regmap, val);
 | |
| 		return get_remote_temp(regmap, channel - 1, val);
 | |
| 	case hwmon_temp_fault:
 | |
| 		return get_fault(regmap, channel - 1, val);
 | |
| 	case hwmon_temp_offset:
 | |
| 		return get_offset(regmap, channel - 1, val);
 | |
| 	default:
 | |
| 		return -EOPNOTSUPP;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int w83773_write(struct device *dev, enum hwmon_sensor_types type,
 | |
| 			u32 attr, int channel, long val)
 | |
| {
 | |
| 	struct regmap *regmap = dev_get_drvdata(dev);
 | |
| 
 | |
| 	if (type == hwmon_chip && attr == hwmon_chip_update_interval)
 | |
| 		return set_update_interval(regmap, val);
 | |
| 
 | |
| 	if (type == hwmon_temp && attr == hwmon_temp_offset)
 | |
| 		return set_offset(regmap, channel - 1, val);
 | |
| 
 | |
| 	return -EOPNOTSUPP;
 | |
| }
 | |
| 
 | |
| static umode_t w83773_is_visible(const void *data, enum hwmon_sensor_types type,
 | |
| 				 u32 attr, int channel)
 | |
| {
 | |
| 	switch (type) {
 | |
| 	case hwmon_chip:
 | |
| 		switch (attr) {
 | |
| 		case hwmon_chip_update_interval:
 | |
| 			return 0644;
 | |
| 		}
 | |
| 		break;
 | |
| 	case hwmon_temp:
 | |
| 		switch (attr) {
 | |
| 		case hwmon_temp_input:
 | |
| 		case hwmon_temp_fault:
 | |
| 			return 0444;
 | |
| 		case hwmon_temp_offset:
 | |
| 			return 0644;
 | |
| 		}
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct hwmon_channel_info *w83773_info[] = {
 | |
| 	HWMON_CHANNEL_INFO(chip,
 | |
| 			   HWMON_C_REGISTER_TZ | HWMON_C_UPDATE_INTERVAL),
 | |
| 	HWMON_CHANNEL_INFO(temp,
 | |
| 			   HWMON_T_INPUT,
 | |
| 			   HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET,
 | |
| 			   HWMON_T_INPUT | HWMON_T_FAULT | HWMON_T_OFFSET),
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static const struct hwmon_ops w83773_ops = {
 | |
| 	.is_visible = w83773_is_visible,
 | |
| 	.read = w83773_read,
 | |
| 	.write = w83773_write,
 | |
| };
 | |
| 
 | |
| static const struct hwmon_chip_info w83773_chip_info = {
 | |
| 	.ops = &w83773_ops,
 | |
| 	.info = w83773_info,
 | |
| };
 | |
| 
 | |
| static const struct regmap_config w83773_regmap_config = {
 | |
| 	.reg_bits = 8,
 | |
| 	.val_bits = 8,
 | |
| };
 | |
| 
 | |
| static int w83773_probe(struct i2c_client *client)
 | |
| {
 | |
| 	struct device *dev = &client->dev;
 | |
| 	struct device *hwmon_dev;
 | |
| 	struct regmap *regmap;
 | |
| 	int ret;
 | |
| 
 | |
| 	regmap = devm_regmap_init_i2c(client, &w83773_regmap_config);
 | |
| 	if (IS_ERR(regmap)) {
 | |
| 		dev_err(dev, "failed to allocate register map\n");
 | |
| 		return PTR_ERR(regmap);
 | |
| 	}
 | |
| 
 | |
| 	/* Set the conversion rate to 2 Hz */
 | |
| 	ret = regmap_write(regmap, W83773_CONVERSION_RATE_REG_WRITE, 0x05);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&client->dev, "error writing config rate register\n");
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	i2c_set_clientdata(client, regmap);
 | |
| 
 | |
| 	hwmon_dev = devm_hwmon_device_register_with_info(dev,
 | |
| 							 client->name,
 | |
| 							 regmap,
 | |
| 							 &w83773_chip_info,
 | |
| 							 NULL);
 | |
| 	return PTR_ERR_OR_ZERO(hwmon_dev);
 | |
| }
 | |
| 
 | |
| static struct i2c_driver w83773_driver = {
 | |
| 	.class = I2C_CLASS_HWMON,
 | |
| 	.driver = {
 | |
| 		.name	= "w83773g",
 | |
| 		.of_match_table = of_match_ptr(w83773_of_match),
 | |
| 	},
 | |
| 	.probe_new = w83773_probe,
 | |
| 	.id_table = w83773_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(w83773_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Lei YU <mine260309@gmail.com>");
 | |
| MODULE_DESCRIPTION("W83773G temperature sensor driver");
 | |
| MODULE_LICENSE("GPL");
 |