441 lines
		
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			441 lines
		
	
	
		
			11 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-or-later
 | |
| /*
 | |
|  * Driver for MAX31730 3-Channel Remote Temperature Sensor
 | |
|  *
 | |
|  * Copyright (c) 2019 Guenter Roeck <linux@roeck-us.net>
 | |
|  */
 | |
| 
 | |
| #include <linux/bits.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/hwmon.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/of_device.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| /* Addresses scanned */
 | |
| static const unsigned short normal_i2c[] = { 0x1c, 0x1d, 0x1e, 0x1f, 0x4c,
 | |
| 					     0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
 | |
| 
 | |
| /* The MAX31730 registers */
 | |
| #define MAX31730_REG_TEMP		0x00
 | |
| #define MAX31730_REG_CONF		0x13
 | |
| #define  MAX31730_STOP			BIT(7)
 | |
| #define  MAX31730_EXTRANGE		BIT(1)
 | |
| #define MAX31730_REG_TEMP_OFFSET	0x16
 | |
| #define  MAX31730_TEMP_OFFSET_BASELINE	0x77
 | |
| #define MAX31730_REG_OFFSET_ENABLE	0x17
 | |
| #define MAX31730_REG_TEMP_MAX		0x20
 | |
| #define MAX31730_REG_TEMP_MIN		0x30
 | |
| #define MAX31730_REG_STATUS_HIGH	0x32
 | |
| #define MAX31730_REG_STATUS_LOW		0x33
 | |
| #define MAX31730_REG_CHANNEL_ENABLE	0x35
 | |
| #define MAX31730_REG_TEMP_FAULT		0x36
 | |
| 
 | |
| #define MAX31730_REG_MFG_ID		0x50
 | |
| #define  MAX31730_MFG_ID		0x4d
 | |
| #define MAX31730_REG_MFG_REV		0x51
 | |
| #define  MAX31730_MFG_REV		0x01
 | |
| 
 | |
| #define MAX31730_TEMP_MIN		(-128000)
 | |
| #define MAX31730_TEMP_MAX		127937
 | |
| 
 | |
| /* Each client has this additional data */
 | |
| struct max31730_data {
 | |
| 	struct i2c_client	*client;
 | |
| 	u8			orig_conf;
 | |
| 	u8			current_conf;
 | |
| 	u8			offset_enable;
 | |
| 	u8			channel_enable;
 | |
| };
 | |
| 
 | |
| /*-----------------------------------------------------------------------*/
 | |
| 
 | |
| static inline long max31730_reg_to_mc(s16 temp)
 | |
| {
 | |
| 	return DIV_ROUND_CLOSEST((temp >> 4) * 1000, 16);
 | |
| }
 | |
| 
 | |
| static int max31730_write_config(struct max31730_data *data, u8 set_mask,
 | |
| 				 u8 clr_mask)
 | |
| {
 | |
| 	u8 value;
 | |
| 
 | |
| 	clr_mask |= MAX31730_EXTRANGE;
 | |
| 	value = data->current_conf & ~clr_mask;
 | |
| 	value |= set_mask;
 | |
| 
 | |
| 	if (data->current_conf != value) {
 | |
| 		s32 err;
 | |
| 
 | |
| 		err = i2c_smbus_write_byte_data(data->client, MAX31730_REG_CONF,
 | |
| 						value);
 | |
| 		if (err)
 | |
| 			return err;
 | |
| 		data->current_conf = value;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int max31730_set_enable(struct i2c_client *client, int reg,
 | |
| 			       u8 *confdata, int channel, bool enable)
 | |
| {
 | |
| 	u8 regval = *confdata;
 | |
| 	int err;
 | |
| 
 | |
| 	if (enable)
 | |
| 		regval |= BIT(channel);
 | |
| 	else
 | |
| 		regval &= ~BIT(channel);
 | |
| 
 | |
| 	if (regval != *confdata) {
 | |
| 		err = i2c_smbus_write_byte_data(client, reg, regval);
 | |
| 		if (err)
 | |
| 			return err;
 | |
| 		*confdata = regval;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int max31730_set_offset_enable(struct max31730_data *data, int channel,
 | |
| 				      bool enable)
 | |
| {
 | |
| 	return max31730_set_enable(data->client, MAX31730_REG_OFFSET_ENABLE,
 | |
| 				   &data->offset_enable, channel, enable);
 | |
| }
 | |
| 
 | |
| static int max31730_set_channel_enable(struct max31730_data *data, int channel,
 | |
| 				       bool enable)
 | |
| {
 | |
| 	return max31730_set_enable(data->client, MAX31730_REG_CHANNEL_ENABLE,
 | |
| 				   &data->channel_enable, channel, enable);
 | |
| }
 | |
| 
 | |
| static int max31730_read(struct device *dev, enum hwmon_sensor_types type,
 | |
| 			 u32 attr, int channel, long *val)
 | |
| {
 | |
| 	struct max31730_data *data = dev_get_drvdata(dev);
 | |
| 	int regval, reg, offset;
 | |
| 
 | |
| 	if (type != hwmon_temp)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	switch (attr) {
 | |
| 	case hwmon_temp_input:
 | |
| 		if (!(data->channel_enable & BIT(channel)))
 | |
| 			return -ENODATA;
 | |
| 		reg = MAX31730_REG_TEMP + (channel * 2);
 | |
| 		break;
 | |
| 	case hwmon_temp_max:
 | |
| 		reg = MAX31730_REG_TEMP_MAX + (channel * 2);
 | |
| 		break;
 | |
| 	case hwmon_temp_min:
 | |
| 		reg = MAX31730_REG_TEMP_MIN;
 | |
| 		break;
 | |
| 	case hwmon_temp_enable:
 | |
| 		*val = !!(data->channel_enable & BIT(channel));
 | |
| 		return 0;
 | |
| 	case hwmon_temp_offset:
 | |
| 		if (!channel)
 | |
| 			return -EINVAL;
 | |
| 		if (!(data->offset_enable & BIT(channel))) {
 | |
| 			*val = 0;
 | |
| 			return 0;
 | |
| 		}
 | |
| 		offset = i2c_smbus_read_byte_data(data->client,
 | |
| 						  MAX31730_REG_TEMP_OFFSET);
 | |
| 		if (offset < 0)
 | |
| 			return offset;
 | |
| 		*val = (offset - MAX31730_TEMP_OFFSET_BASELINE) * 125;
 | |
| 		return 0;
 | |
| 	case hwmon_temp_fault:
 | |
| 		regval = i2c_smbus_read_byte_data(data->client,
 | |
| 						  MAX31730_REG_TEMP_FAULT);
 | |
| 		if (regval < 0)
 | |
| 			return regval;
 | |
| 		*val = !!(regval & BIT(channel));
 | |
| 		return 0;
 | |
| 	case hwmon_temp_min_alarm:
 | |
| 		regval = i2c_smbus_read_byte_data(data->client,
 | |
| 						  MAX31730_REG_STATUS_LOW);
 | |
| 		if (regval < 0)
 | |
| 			return regval;
 | |
| 		*val = !!(regval & BIT(channel));
 | |
| 		return 0;
 | |
| 	case hwmon_temp_max_alarm:
 | |
| 		regval = i2c_smbus_read_byte_data(data->client,
 | |
| 						  MAX31730_REG_STATUS_HIGH);
 | |
| 		if (regval < 0)
 | |
| 			return regval;
 | |
| 		*val = !!(regval & BIT(channel));
 | |
| 		return 0;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	regval = i2c_smbus_read_word_swapped(data->client, reg);
 | |
| 	if (regval < 0)
 | |
| 		return regval;
 | |
| 
 | |
| 	*val = max31730_reg_to_mc(regval);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int max31730_write(struct device *dev, enum hwmon_sensor_types type,
 | |
| 			  u32 attr, int channel, long val)
 | |
| {
 | |
| 	struct max31730_data *data = dev_get_drvdata(dev);
 | |
| 	int reg, err;
 | |
| 
 | |
| 	if (type != hwmon_temp)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	switch (attr) {
 | |
| 	case hwmon_temp_max:
 | |
| 		reg = MAX31730_REG_TEMP_MAX + channel * 2;
 | |
| 		break;
 | |
| 	case hwmon_temp_min:
 | |
| 		reg = MAX31730_REG_TEMP_MIN;
 | |
| 		break;
 | |
| 	case hwmon_temp_enable:
 | |
| 		if (val != 0 && val != 1)
 | |
| 			return -EINVAL;
 | |
| 		return max31730_set_channel_enable(data, channel, val);
 | |
| 	case hwmon_temp_offset:
 | |
| 		val = clamp_val(val, -14875, 17000) + 14875;
 | |
| 		val = DIV_ROUND_CLOSEST(val, 125);
 | |
| 		err = max31730_set_offset_enable(data, channel,
 | |
| 					val != MAX31730_TEMP_OFFSET_BASELINE);
 | |
| 		if (err)
 | |
| 			return err;
 | |
| 		return i2c_smbus_write_byte_data(data->client,
 | |
| 						 MAX31730_REG_TEMP_OFFSET, val);
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	val = clamp_val(val, MAX31730_TEMP_MIN, MAX31730_TEMP_MAX);
 | |
| 	val = DIV_ROUND_CLOSEST(val << 4, 1000) << 4;
 | |
| 
 | |
| 	return i2c_smbus_write_word_swapped(data->client, reg, (u16)val);
 | |
| }
 | |
| 
 | |
| static umode_t max31730_is_visible(const void *data,
 | |
| 				   enum hwmon_sensor_types type,
 | |
| 				   u32 attr, int channel)
 | |
| {
 | |
| 	switch (type) {
 | |
| 	case hwmon_temp:
 | |
| 		switch (attr) {
 | |
| 		case hwmon_temp_input:
 | |
| 		case hwmon_temp_min_alarm:
 | |
| 		case hwmon_temp_max_alarm:
 | |
| 		case hwmon_temp_fault:
 | |
| 			return 0444;
 | |
| 		case hwmon_temp_min:
 | |
| 			return channel ? 0444 : 0644;
 | |
| 		case hwmon_temp_offset:
 | |
| 		case hwmon_temp_enable:
 | |
| 		case hwmon_temp_max:
 | |
| 			return 0644;
 | |
| 		}
 | |
| 		break;
 | |
| 	default:
 | |
| 		break;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct hwmon_channel_info *max31730_info[] = {
 | |
| 	HWMON_CHANNEL_INFO(chip,
 | |
| 			   HWMON_C_REGISTER_TZ),
 | |
| 	HWMON_CHANNEL_INFO(temp,
 | |
| 			   HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
 | |
| 			   HWMON_T_ENABLE |
 | |
| 			   HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM,
 | |
| 			   HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
 | |
| 			   HWMON_T_OFFSET | HWMON_T_ENABLE |
 | |
| 			   HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
 | |
| 			   HWMON_T_FAULT,
 | |
| 			   HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
 | |
| 			   HWMON_T_OFFSET | HWMON_T_ENABLE |
 | |
| 			   HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
 | |
| 			   HWMON_T_FAULT,
 | |
| 			   HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
 | |
| 			   HWMON_T_OFFSET | HWMON_T_ENABLE |
 | |
| 			   HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
 | |
| 			   HWMON_T_FAULT
 | |
| 			   ),
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static const struct hwmon_ops max31730_hwmon_ops = {
 | |
| 	.is_visible = max31730_is_visible,
 | |
| 	.read = max31730_read,
 | |
| 	.write = max31730_write,
 | |
| };
 | |
| 
 | |
| static const struct hwmon_chip_info max31730_chip_info = {
 | |
| 	.ops = &max31730_hwmon_ops,
 | |
| 	.info = max31730_info,
 | |
| };
 | |
| 
 | |
| static void max31730_remove(void *data)
 | |
| {
 | |
| 	struct max31730_data *max31730 = data;
 | |
| 	struct i2c_client *client = max31730->client;
 | |
| 
 | |
| 	i2c_smbus_write_byte_data(client, MAX31730_REG_CONF,
 | |
| 				  max31730->orig_conf);
 | |
| }
 | |
| 
 | |
| static int
 | |
| max31730_probe(struct i2c_client *client)
 | |
| {
 | |
| 	struct device *dev = &client->dev;
 | |
| 	struct device *hwmon_dev;
 | |
| 	struct max31730_data *data;
 | |
| 	int status, err;
 | |
| 
 | |
| 	if (!i2c_check_functionality(client->adapter,
 | |
| 			I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
 | |
| 		return -EIO;
 | |
| 
 | |
| 	data = devm_kzalloc(dev, sizeof(struct max31730_data), GFP_KERNEL);
 | |
| 	if (!data)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	data->client = client;
 | |
| 
 | |
| 	/* Cache original configuration and enable status */
 | |
| 	status = i2c_smbus_read_byte_data(client, MAX31730_REG_CHANNEL_ENABLE);
 | |
| 	if (status < 0)
 | |
| 		return status;
 | |
| 	data->channel_enable = status;
 | |
| 
 | |
| 	status = i2c_smbus_read_byte_data(client, MAX31730_REG_OFFSET_ENABLE);
 | |
| 	if (status < 0)
 | |
| 		return status;
 | |
| 	data->offset_enable = status;
 | |
| 
 | |
| 	status = i2c_smbus_read_byte_data(client, MAX31730_REG_CONF);
 | |
| 	if (status < 0)
 | |
| 		return status;
 | |
| 	data->orig_conf = status;
 | |
| 	data->current_conf = status;
 | |
| 
 | |
| 	err = max31730_write_config(data,
 | |
| 				    data->channel_enable ? 0 : MAX31730_STOP,
 | |
| 				    data->channel_enable ? MAX31730_STOP : 0);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	dev_set_drvdata(dev, data);
 | |
| 
 | |
| 	err = devm_add_action_or_reset(dev, max31730_remove, data);
 | |
| 	if (err)
 | |
| 		return err;
 | |
| 
 | |
| 	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
 | |
| 							 data,
 | |
| 							 &max31730_chip_info,
 | |
| 							 NULL);
 | |
| 	return PTR_ERR_OR_ZERO(hwmon_dev);
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id max31730_ids[] = {
 | |
| 	{ "max31730", 0, },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, max31730_ids);
 | |
| 
 | |
| static const struct of_device_id __maybe_unused max31730_of_match[] = {
 | |
| 	{
 | |
| 		.compatible = "maxim,max31730",
 | |
| 	},
 | |
| 	{ },
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, max31730_of_match);
 | |
| 
 | |
| static bool max31730_check_reg_temp(struct i2c_client *client,
 | |
| 				    int reg)
 | |
| {
 | |
| 	int regval;
 | |
| 
 | |
| 	regval = i2c_smbus_read_byte_data(client, reg + 1);
 | |
| 	return regval < 0 || (regval & 0x0f);
 | |
| }
 | |
| 
 | |
| /* Return 0 if detection is successful, -ENODEV otherwise */
 | |
| static int max31730_detect(struct i2c_client *client,
 | |
| 			   struct i2c_board_info *info)
 | |
| {
 | |
| 	struct i2c_adapter *adapter = client->adapter;
 | |
| 	int regval;
 | |
| 	int i;
 | |
| 
 | |
| 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
 | |
| 				     I2C_FUNC_SMBUS_WORD_DATA))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	regval = i2c_smbus_read_byte_data(client, MAX31730_REG_MFG_ID);
 | |
| 	if (regval != MAX31730_MFG_ID)
 | |
| 		return -ENODEV;
 | |
| 	regval = i2c_smbus_read_byte_data(client, MAX31730_REG_MFG_REV);
 | |
| 	if (regval != MAX31730_MFG_REV)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	/* lower 4 bit of temperature and limit registers must be 0 */
 | |
| 	if (max31730_check_reg_temp(client, MAX31730_REG_TEMP_MIN))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	for (i = 0; i < 4; i++) {
 | |
| 		if (max31730_check_reg_temp(client, MAX31730_REG_TEMP + i * 2))
 | |
| 			return -ENODEV;
 | |
| 		if (max31730_check_reg_temp(client,
 | |
| 					    MAX31730_REG_TEMP_MAX + i * 2))
 | |
| 			return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	strlcpy(info->type, "max31730", I2C_NAME_SIZE);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int __maybe_unused max31730_suspend(struct device *dev)
 | |
| {
 | |
| 	struct max31730_data *data = dev_get_drvdata(dev);
 | |
| 
 | |
| 	return max31730_write_config(data, MAX31730_STOP, 0);
 | |
| }
 | |
| 
 | |
| static int __maybe_unused max31730_resume(struct device *dev)
 | |
| {
 | |
| 	struct max31730_data *data = dev_get_drvdata(dev);
 | |
| 
 | |
| 	return max31730_write_config(data, 0, MAX31730_STOP);
 | |
| }
 | |
| 
 | |
| static SIMPLE_DEV_PM_OPS(max31730_pm_ops, max31730_suspend, max31730_resume);
 | |
| 
 | |
| static struct i2c_driver max31730_driver = {
 | |
| 	.class		= I2C_CLASS_HWMON,
 | |
| 	.driver = {
 | |
| 		.name	= "max31730",
 | |
| 		.of_match_table = of_match_ptr(max31730_of_match),
 | |
| 		.pm	= &max31730_pm_ops,
 | |
| 	},
 | |
| 	.probe_new	= max31730_probe,
 | |
| 	.id_table	= max31730_ids,
 | |
| 	.detect		= max31730_detect,
 | |
| 	.address_list	= normal_i2c,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(max31730_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
 | |
| MODULE_DESCRIPTION("MAX31730 driver");
 | |
| MODULE_LICENSE("GPL");
 |