735 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			735 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-or-later
 | |
| /*
 | |
|  * Driver for Texas Instruments / National Semiconductor LM95234
 | |
|  *
 | |
|  * Copyright (c) 2013, 2014 Guenter Roeck <linux@roeck-us.net>
 | |
|  *
 | |
|  * Derived from lm95241.c
 | |
|  * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com>
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/init.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/jiffies.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/hwmon.h>
 | |
| #include <linux/hwmon-sysfs.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/sysfs.h>
 | |
| 
 | |
| #define DRVNAME "lm95234"
 | |
| 
 | |
| enum chips { lm95233, lm95234 };
 | |
| 
 | |
| static const unsigned short normal_i2c[] = {
 | |
| 	0x18, 0x2a, 0x2b, 0x4d, 0x4e, I2C_CLIENT_END };
 | |
| 
 | |
| /* LM95234 registers */
 | |
| #define LM95234_REG_MAN_ID		0xFE
 | |
| #define LM95234_REG_CHIP_ID		0xFF
 | |
| #define LM95234_REG_STATUS		0x02
 | |
| #define LM95234_REG_CONFIG		0x03
 | |
| #define LM95234_REG_CONVRATE		0x04
 | |
| #define LM95234_REG_STS_FAULT		0x07
 | |
| #define LM95234_REG_STS_TCRIT1		0x08
 | |
| #define LM95234_REG_STS_TCRIT2		0x09
 | |
| #define LM95234_REG_TEMPH(x)		((x) + 0x10)
 | |
| #define LM95234_REG_TEMPL(x)		((x) + 0x20)
 | |
| #define LM95234_REG_UTEMPH(x)		((x) + 0x19)	/* Remote only */
 | |
| #define LM95234_REG_UTEMPL(x)		((x) + 0x29)
 | |
| #define LM95234_REG_REM_MODEL		0x30
 | |
| #define LM95234_REG_REM_MODEL_STS	0x38
 | |
| #define LM95234_REG_OFFSET(x)		((x) + 0x31)	/* Remote only */
 | |
| #define LM95234_REG_TCRIT1(x)		((x) + 0x40)
 | |
| #define LM95234_REG_TCRIT2(x)		((x) + 0x49)	/* Remote channel 1,2 */
 | |
| #define LM95234_REG_TCRIT_HYST		0x5a
 | |
| 
 | |
| #define NATSEMI_MAN_ID			0x01
 | |
| #define LM95233_CHIP_ID			0x89
 | |
| #define LM95234_CHIP_ID			0x79
 | |
| 
 | |
| /* Client data (each client gets its own) */
 | |
| struct lm95234_data {
 | |
| 	struct i2c_client *client;
 | |
| 	const struct attribute_group *groups[3];
 | |
| 	struct mutex update_lock;
 | |
| 	unsigned long last_updated, interval;	/* in jiffies */
 | |
| 	bool valid;		/* false until following fields are valid */
 | |
| 	/* registers values */
 | |
| 	int temp[5];		/* temperature (signed) */
 | |
| 	u32 status;		/* fault/alarm status */
 | |
| 	u8 tcrit1[5];		/* critical temperature limit */
 | |
| 	u8 tcrit2[2];		/* high temperature limit */
 | |
| 	s8 toffset[4];		/* remote temperature offset */
 | |
| 	u8 thyst;		/* common hysteresis */
 | |
| 
 | |
| 	u8 sensor_type;		/* temperature sensor type */
 | |
| };
 | |
| 
 | |
| static int lm95234_read_temp(struct i2c_client *client, int index, int *t)
 | |
| {
 | |
| 	int val;
 | |
| 	u16 temp = 0;
 | |
| 
 | |
| 	if (index) {
 | |
| 		val = i2c_smbus_read_byte_data(client,
 | |
| 					       LM95234_REG_UTEMPH(index - 1));
 | |
| 		if (val < 0)
 | |
| 			return val;
 | |
| 		temp = val << 8;
 | |
| 		val = i2c_smbus_read_byte_data(client,
 | |
| 					       LM95234_REG_UTEMPL(index - 1));
 | |
| 		if (val < 0)
 | |
| 			return val;
 | |
| 		temp |= val;
 | |
| 		*t = temp;
 | |
| 	}
 | |
| 	/*
 | |
| 	 * Read signed temperature if unsigned temperature is 0,
 | |
| 	 * or if this is the local sensor.
 | |
| 	 */
 | |
| 	if (!temp) {
 | |
| 		val = i2c_smbus_read_byte_data(client,
 | |
| 					       LM95234_REG_TEMPH(index));
 | |
| 		if (val < 0)
 | |
| 			return val;
 | |
| 		temp = val << 8;
 | |
| 		val = i2c_smbus_read_byte_data(client,
 | |
| 					       LM95234_REG_TEMPL(index));
 | |
| 		if (val < 0)
 | |
| 			return val;
 | |
| 		temp |= val;
 | |
| 		*t = (s16)temp;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static u16 update_intervals[] = { 143, 364, 1000, 2500 };
 | |
| 
 | |
| /* Fill value cache. Must be called with update lock held. */
 | |
| 
 | |
| static int lm95234_fill_cache(struct lm95234_data *data,
 | |
| 			      struct i2c_client *client)
 | |
| {
 | |
| 	int i, ret;
 | |
| 
 | |
| 	ret = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	data->interval = msecs_to_jiffies(update_intervals[ret & 0x03]);
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(data->tcrit1); i++) {
 | |
| 		ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT1(i));
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 		data->tcrit1[i] = ret;
 | |
| 	}
 | |
| 	for (i = 0; i < ARRAY_SIZE(data->tcrit2); i++) {
 | |
| 		ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT2(i));
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 		data->tcrit2[i] = ret;
 | |
| 	}
 | |
| 	for (i = 0; i < ARRAY_SIZE(data->toffset); i++) {
 | |
| 		ret = i2c_smbus_read_byte_data(client, LM95234_REG_OFFSET(i));
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 		data->toffset[i] = ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = i2c_smbus_read_byte_data(client, LM95234_REG_TCRIT_HYST);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 	data->thyst = ret;
 | |
| 
 | |
| 	ret = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 	data->sensor_type = ret;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int lm95234_update_device(struct lm95234_data *data)
 | |
| {
 | |
| 	struct i2c_client *client = data->client;
 | |
| 	int ret;
 | |
| 
 | |
| 	mutex_lock(&data->update_lock);
 | |
| 
 | |
| 	if (time_after(jiffies, data->last_updated + data->interval) ||
 | |
| 	    !data->valid) {
 | |
| 		int i;
 | |
| 
 | |
| 		if (!data->valid) {
 | |
| 			ret = lm95234_fill_cache(data, client);
 | |
| 			if (ret < 0)
 | |
| 				goto abort;
 | |
| 		}
 | |
| 
 | |
| 		data->valid = false;
 | |
| 		for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
 | |
| 			ret = lm95234_read_temp(client, i, &data->temp[i]);
 | |
| 			if (ret < 0)
 | |
| 				goto abort;
 | |
| 		}
 | |
| 
 | |
| 		ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_FAULT);
 | |
| 		if (ret < 0)
 | |
| 			goto abort;
 | |
| 		data->status = ret;
 | |
| 
 | |
| 		ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT1);
 | |
| 		if (ret < 0)
 | |
| 			goto abort;
 | |
| 		data->status |= ret << 8;
 | |
| 
 | |
| 		ret = i2c_smbus_read_byte_data(client, LM95234_REG_STS_TCRIT2);
 | |
| 		if (ret < 0)
 | |
| 			goto abort;
 | |
| 		data->status |= ret << 16;
 | |
| 
 | |
| 		data->last_updated = jiffies;
 | |
| 		data->valid = true;
 | |
| 	}
 | |
| 	ret = 0;
 | |
| abort:
 | |
| 	mutex_unlock(&data->update_lock);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
 | |
| 			 char *buf)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int index = to_sensor_dev_attr(attr)->index;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return sprintf(buf, "%d\n",
 | |
| 		       DIV_ROUND_CLOSEST(data->temp[index] * 125, 32));
 | |
| }
 | |
| 
 | |
| static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
 | |
| 			  char *buf)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	u32 mask = to_sensor_dev_attr(attr)->index;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return sprintf(buf, "%u", !!(data->status & mask));
 | |
| }
 | |
| 
 | |
| static ssize_t type_show(struct device *dev, struct device_attribute *attr,
 | |
| 			 char *buf)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	u8 mask = to_sensor_dev_attr(attr)->index;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return sprintf(buf, data->sensor_type & mask ? "1\n" : "2\n");
 | |
| }
 | |
| 
 | |
| static ssize_t type_store(struct device *dev, struct device_attribute *attr,
 | |
| 			  const char *buf, size_t count)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	unsigned long val;
 | |
| 	u8 mask = to_sensor_dev_attr(attr)->index;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = kstrtoul(buf, 10, &val);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	if (val != 1 && val != 2)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	mutex_lock(&data->update_lock);
 | |
| 	if (val == 1)
 | |
| 		data->sensor_type |= mask;
 | |
| 	else
 | |
| 		data->sensor_type &= ~mask;
 | |
| 	data->valid = false;
 | |
| 	i2c_smbus_write_byte_data(data->client, LM95234_REG_REM_MODEL,
 | |
| 				  data->sensor_type);
 | |
| 	mutex_unlock(&data->update_lock);
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static ssize_t tcrit2_show(struct device *dev, struct device_attribute *attr,
 | |
| 			   char *buf)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int index = to_sensor_dev_attr(attr)->index;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return sprintf(buf, "%u", data->tcrit2[index] * 1000);
 | |
| }
 | |
| 
 | |
| static ssize_t tcrit2_store(struct device *dev, struct device_attribute *attr,
 | |
| 			    const char *buf, size_t count)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int index = to_sensor_dev_attr(attr)->index;
 | |
| 	long val;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = kstrtol(buf, 10, &val);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	val = DIV_ROUND_CLOSEST(clamp_val(val, 0, (index ? 255 : 127) * 1000),
 | |
| 				1000);
 | |
| 
 | |
| 	mutex_lock(&data->update_lock);
 | |
| 	data->tcrit2[index] = val;
 | |
| 	i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT2(index), val);
 | |
| 	mutex_unlock(&data->update_lock);
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static ssize_t tcrit2_hyst_show(struct device *dev,
 | |
| 				struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int index = to_sensor_dev_attr(attr)->index;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Result can be negative, so be careful with unsigned operands */
 | |
| 	return sprintf(buf, "%d",
 | |
| 		       ((int)data->tcrit2[index] - (int)data->thyst) * 1000);
 | |
| }
 | |
| 
 | |
| static ssize_t tcrit1_show(struct device *dev, struct device_attribute *attr,
 | |
| 			   char *buf)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int index = to_sensor_dev_attr(attr)->index;
 | |
| 
 | |
| 	return sprintf(buf, "%u", data->tcrit1[index] * 1000);
 | |
| }
 | |
| 
 | |
| static ssize_t tcrit1_store(struct device *dev, struct device_attribute *attr,
 | |
| 			    const char *buf, size_t count)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int index = to_sensor_dev_attr(attr)->index;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 	long val;
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = kstrtol(buf, 10, &val);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	val = DIV_ROUND_CLOSEST(clamp_val(val, 0, 255000), 1000);
 | |
| 
 | |
| 	mutex_lock(&data->update_lock);
 | |
| 	data->tcrit1[index] = val;
 | |
| 	i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT1(index), val);
 | |
| 	mutex_unlock(&data->update_lock);
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static ssize_t tcrit1_hyst_show(struct device *dev,
 | |
| 				struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int index = to_sensor_dev_attr(attr)->index;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Result can be negative, so be careful with unsigned operands */
 | |
| 	return sprintf(buf, "%d",
 | |
| 		       ((int)data->tcrit1[index] - (int)data->thyst) * 1000);
 | |
| }
 | |
| 
 | |
| static ssize_t tcrit1_hyst_store(struct device *dev,
 | |
| 				 struct device_attribute *attr,
 | |
| 				 const char *buf, size_t count)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int index = to_sensor_dev_attr(attr)->index;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 	long val;
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = kstrtol(buf, 10, &val);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	val = DIV_ROUND_CLOSEST(clamp_val(val, -255000, 255000), 1000);
 | |
| 	val = clamp_val((int)data->tcrit1[index] - val, 0, 31);
 | |
| 
 | |
| 	mutex_lock(&data->update_lock);
 | |
| 	data->thyst = val;
 | |
| 	i2c_smbus_write_byte_data(data->client, LM95234_REG_TCRIT_HYST, val);
 | |
| 	mutex_unlock(&data->update_lock);
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static ssize_t offset_show(struct device *dev, struct device_attribute *attr,
 | |
| 			   char *buf)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int index = to_sensor_dev_attr(attr)->index;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return sprintf(buf, "%d", data->toffset[index] * 500);
 | |
| }
 | |
| 
 | |
| static ssize_t offset_store(struct device *dev, struct device_attribute *attr,
 | |
| 			    const char *buf, size_t count)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int index = to_sensor_dev_attr(attr)->index;
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 	long val;
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = kstrtol(buf, 10, &val);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Accuracy is 1/2 degrees C */
 | |
| 	val = DIV_ROUND_CLOSEST(clamp_val(val, -64000, 63500), 500);
 | |
| 
 | |
| 	mutex_lock(&data->update_lock);
 | |
| 	data->toffset[index] = val;
 | |
| 	i2c_smbus_write_byte_data(data->client, LM95234_REG_OFFSET(index), val);
 | |
| 	mutex_unlock(&data->update_lock);
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static ssize_t update_interval_show(struct device *dev,
 | |
| 				    struct device_attribute *attr, char *buf)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return sprintf(buf, "%lu\n",
 | |
| 		       DIV_ROUND_CLOSEST(data->interval * 1000, HZ));
 | |
| }
 | |
| 
 | |
| static ssize_t update_interval_store(struct device *dev,
 | |
| 				     struct device_attribute *attr,
 | |
| 				     const char *buf, size_t count)
 | |
| {
 | |
| 	struct lm95234_data *data = dev_get_drvdata(dev);
 | |
| 	int ret = lm95234_update_device(data);
 | |
| 	unsigned long val;
 | |
| 	u8 regval;
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = kstrtoul(buf, 10, &val);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	for (regval = 0; regval < 3; regval++) {
 | |
| 		if (val <= update_intervals[regval])
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	mutex_lock(&data->update_lock);
 | |
| 	data->interval = msecs_to_jiffies(update_intervals[regval]);
 | |
| 	i2c_smbus_write_byte_data(data->client, LM95234_REG_CONVRATE, regval);
 | |
| 	mutex_unlock(&data->update_lock);
 | |
| 
 | |
| 	return count;
 | |
| }
 | |
| 
 | |
| static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
 | |
| static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
 | |
| static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
 | |
| static SENSOR_DEVICE_ATTR_RO(temp4_input, temp, 3);
 | |
| static SENSOR_DEVICE_ATTR_RO(temp5_input, temp, 4);
 | |
| 
 | |
| static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, BIT(0) | BIT(1));
 | |
| static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, BIT(2) | BIT(3));
 | |
| static SENSOR_DEVICE_ATTR_RO(temp4_fault, alarm, BIT(4) | BIT(5));
 | |
| static SENSOR_DEVICE_ATTR_RO(temp5_fault, alarm, BIT(6) | BIT(7));
 | |
| 
 | |
| static SENSOR_DEVICE_ATTR_RW(temp2_type, type, BIT(1));
 | |
| static SENSOR_DEVICE_ATTR_RW(temp3_type, type, BIT(2));
 | |
| static SENSOR_DEVICE_ATTR_RW(temp4_type, type, BIT(3));
 | |
| static SENSOR_DEVICE_ATTR_RW(temp5_type, type, BIT(4));
 | |
| 
 | |
| static SENSOR_DEVICE_ATTR_RW(temp1_max, tcrit1, 0);
 | |
| static SENSOR_DEVICE_ATTR_RW(temp2_max, tcrit2, 0);
 | |
| static SENSOR_DEVICE_ATTR_RW(temp3_max, tcrit2, 1);
 | |
| static SENSOR_DEVICE_ATTR_RW(temp4_max, tcrit1, 3);
 | |
| static SENSOR_DEVICE_ATTR_RW(temp5_max, tcrit1, 4);
 | |
| 
 | |
| static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, tcrit1_hyst, 0);
 | |
| static SENSOR_DEVICE_ATTR_RO(temp2_max_hyst, tcrit2_hyst, 0);
 | |
| static SENSOR_DEVICE_ATTR_RO(temp3_max_hyst, tcrit2_hyst, 1);
 | |
| static SENSOR_DEVICE_ATTR_RO(temp4_max_hyst, tcrit1_hyst, 3);
 | |
| static SENSOR_DEVICE_ATTR_RO(temp5_max_hyst, tcrit1_hyst, 4);
 | |
| 
 | |
| static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, BIT(0 + 8));
 | |
| static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, BIT(1 + 16));
 | |
| static SENSOR_DEVICE_ATTR_RO(temp3_max_alarm, alarm, BIT(2 + 16));
 | |
| static SENSOR_DEVICE_ATTR_RO(temp4_max_alarm, alarm, BIT(3 + 8));
 | |
| static SENSOR_DEVICE_ATTR_RO(temp5_max_alarm, alarm, BIT(4 + 8));
 | |
| 
 | |
| static SENSOR_DEVICE_ATTR_RW(temp2_crit, tcrit1, 1);
 | |
| static SENSOR_DEVICE_ATTR_RW(temp3_crit, tcrit1, 2);
 | |
| 
 | |
| static SENSOR_DEVICE_ATTR_RO(temp2_crit_hyst, tcrit1_hyst, 1);
 | |
| static SENSOR_DEVICE_ATTR_RO(temp3_crit_hyst, tcrit1_hyst, 2);
 | |
| 
 | |
| static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, BIT(1 + 8));
 | |
| static SENSOR_DEVICE_ATTR_RO(temp3_crit_alarm, alarm, BIT(2 + 8));
 | |
| 
 | |
| static SENSOR_DEVICE_ATTR_RW(temp2_offset, offset, 0);
 | |
| static SENSOR_DEVICE_ATTR_RW(temp3_offset, offset, 1);
 | |
| static SENSOR_DEVICE_ATTR_RW(temp4_offset, offset, 2);
 | |
| static SENSOR_DEVICE_ATTR_RW(temp5_offset, offset, 3);
 | |
| 
 | |
| static DEVICE_ATTR_RW(update_interval);
 | |
| 
 | |
| static struct attribute *lm95234_common_attrs[] = {
 | |
| 	&sensor_dev_attr_temp1_input.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_input.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_input.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_fault.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_fault.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_type.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_type.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp1_max.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_max.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_max.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_crit.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_crit.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_crit_hyst.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp2_offset.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp3_offset.dev_attr.attr,
 | |
| 	&dev_attr_update_interval.attr,
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static const struct attribute_group lm95234_common_group = {
 | |
| 	.attrs = lm95234_common_attrs,
 | |
| };
 | |
| 
 | |
| static struct attribute *lm95234_attrs[] = {
 | |
| 	&sensor_dev_attr_temp4_input.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp5_input.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp4_fault.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp5_fault.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp4_type.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp5_type.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp4_max.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp5_max.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp5_max_hyst.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp4_offset.dev_attr.attr,
 | |
| 	&sensor_dev_attr_temp5_offset.dev_attr.attr,
 | |
| 	NULL
 | |
| };
 | |
| 
 | |
| static const struct attribute_group lm95234_group = {
 | |
| 	.attrs = lm95234_attrs,
 | |
| };
 | |
| 
 | |
| static int lm95234_detect(struct i2c_client *client,
 | |
| 			  struct i2c_board_info *info)
 | |
| {
 | |
| 	struct i2c_adapter *adapter = client->adapter;
 | |
| 	int address = client->addr;
 | |
| 	u8 config_mask, model_mask;
 | |
| 	int mfg_id, chip_id, val;
 | |
| 	const char *name;
 | |
| 
 | |
| 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	mfg_id = i2c_smbus_read_byte_data(client, LM95234_REG_MAN_ID);
 | |
| 	if (mfg_id != NATSEMI_MAN_ID)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	chip_id = i2c_smbus_read_byte_data(client, LM95234_REG_CHIP_ID);
 | |
| 	switch (chip_id) {
 | |
| 	case LM95233_CHIP_ID:
 | |
| 		if (address != 0x18 && address != 0x2a && address != 0x2b)
 | |
| 			return -ENODEV;
 | |
| 		config_mask = 0xbf;
 | |
| 		model_mask = 0xf9;
 | |
| 		name = "lm95233";
 | |
| 		break;
 | |
| 	case LM95234_CHIP_ID:
 | |
| 		if (address != 0x18 && address != 0x4d && address != 0x4e)
 | |
| 			return -ENODEV;
 | |
| 		config_mask = 0xbc;
 | |
| 		model_mask = 0xe1;
 | |
| 		name = "lm95234";
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 
 | |
| 	val = i2c_smbus_read_byte_data(client, LM95234_REG_STATUS);
 | |
| 	if (val & 0x30)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG);
 | |
| 	if (val & config_mask)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	val = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE);
 | |
| 	if (val & 0xfc)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL);
 | |
| 	if (val & model_mask)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS);
 | |
| 	if (val & model_mask)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	strlcpy(info->type, name, I2C_NAME_SIZE);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int lm95234_init_client(struct i2c_client *client)
 | |
| {
 | |
| 	int val, model;
 | |
| 
 | |
| 	/* start conversion if necessary */
 | |
| 	val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG);
 | |
| 	if (val < 0)
 | |
| 		return val;
 | |
| 	if (val & 0x40)
 | |
| 		i2c_smbus_write_byte_data(client, LM95234_REG_CONFIG,
 | |
| 					  val & ~0x40);
 | |
| 
 | |
| 	/* If diode type status reports an error, try to fix it */
 | |
| 	val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS);
 | |
| 	if (val < 0)
 | |
| 		return val;
 | |
| 	model = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL);
 | |
| 	if (model < 0)
 | |
| 		return model;
 | |
| 	if (model & val) {
 | |
| 		dev_notice(&client->dev,
 | |
| 			   "Fixing remote diode type misconfiguration (0x%x)\n",
 | |
| 			   val);
 | |
| 		i2c_smbus_write_byte_data(client, LM95234_REG_REM_MODEL,
 | |
| 					  model & ~val);
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id lm95234_id[];
 | |
| 
 | |
| static int lm95234_probe(struct i2c_client *client)
 | |
| {
 | |
| 	struct device *dev = &client->dev;
 | |
| 	struct lm95234_data *data;
 | |
| 	struct device *hwmon_dev;
 | |
| 	int err;
 | |
| 
 | |
| 	data = devm_kzalloc(dev, sizeof(struct lm95234_data), GFP_KERNEL);
 | |
| 	if (!data)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	data->client = client;
 | |
| 	mutex_init(&data->update_lock);
 | |
| 
 | |
| 	/* Initialize the LM95234 chip */
 | |
| 	err = lm95234_init_client(client);
 | |
| 	if (err < 0)
 | |
| 		return err;
 | |
| 
 | |
| 	data->groups[0] = &lm95234_common_group;
 | |
| 	if (i2c_match_id(lm95234_id, client)->driver_data == lm95234)
 | |
| 		data->groups[1] = &lm95234_group;
 | |
| 
 | |
| 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
 | |
| 							   data, data->groups);
 | |
| 	return PTR_ERR_OR_ZERO(hwmon_dev);
 | |
| }
 | |
| 
 | |
| /* Driver data (common to all clients) */
 | |
| static const struct i2c_device_id lm95234_id[] = {
 | |
| 	{ "lm95233", lm95233 },
 | |
| 	{ "lm95234", lm95234 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, lm95234_id);
 | |
| 
 | |
| static struct i2c_driver lm95234_driver = {
 | |
| 	.class		= I2C_CLASS_HWMON,
 | |
| 	.driver = {
 | |
| 		.name	= DRVNAME,
 | |
| 	},
 | |
| 	.probe_new	= lm95234_probe,
 | |
| 	.id_table	= lm95234_id,
 | |
| 	.detect		= lm95234_detect,
 | |
| 	.address_list	= normal_i2c,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(lm95234_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
 | |
| MODULE_DESCRIPTION("LM95233/LM95234 sensor driver");
 | |
| MODULE_LICENSE("GPL");
 |