198 lines
		
	
	
		
			4.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			198 lines
		
	
	
		
			4.8 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  *  74Hx164 - Generic serial-in/parallel-out 8-bits shift register GPIO driver
 | |
|  *
 | |
|  *  Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
 | |
|  *  Copyright (C) 2010 Miguel Gaio <miguel.gaio@efixo.com>
 | |
|  */
 | |
| 
 | |
| #include <linux/bitops.h>
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/gpio/driver.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/property.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/spi/spi.h>
 | |
| 
 | |
| #define GEN_74X164_NUMBER_GPIOS	8
 | |
| 
 | |
| struct gen_74x164_chip {
 | |
| 	struct gpio_chip	gpio_chip;
 | |
| 	struct mutex		lock;
 | |
| 	struct gpio_desc	*gpiod_oe;
 | |
| 	u32			registers;
 | |
| 	/*
 | |
| 	 * Since the registers are chained, every byte sent will make
 | |
| 	 * the previous byte shift to the next register in the
 | |
| 	 * chain. Thus, the first byte sent will end up in the last
 | |
| 	 * register at the end of the transfer. So, to have a logical
 | |
| 	 * numbering, store the bytes in reverse order.
 | |
| 	 */
 | |
| 	u8			buffer[];
 | |
| };
 | |
| 
 | |
| static int __gen_74x164_write_config(struct gen_74x164_chip *chip)
 | |
| {
 | |
| 	return spi_write(to_spi_device(chip->gpio_chip.parent), chip->buffer,
 | |
| 			 chip->registers);
 | |
| }
 | |
| 
 | |
| static int gen_74x164_get_value(struct gpio_chip *gc, unsigned offset)
 | |
| {
 | |
| 	struct gen_74x164_chip *chip = gpiochip_get_data(gc);
 | |
| 	u8 bank = chip->registers - 1 - offset / 8;
 | |
| 	u8 pin = offset % 8;
 | |
| 	int ret;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 	ret = (chip->buffer[bank] >> pin) & 0x1;
 | |
| 	mutex_unlock(&chip->lock);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void gen_74x164_set_value(struct gpio_chip *gc,
 | |
| 		unsigned offset, int val)
 | |
| {
 | |
| 	struct gen_74x164_chip *chip = gpiochip_get_data(gc);
 | |
| 	u8 bank = chip->registers - 1 - offset / 8;
 | |
| 	u8 pin = offset % 8;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 	if (val)
 | |
| 		chip->buffer[bank] |= (1 << pin);
 | |
| 	else
 | |
| 		chip->buffer[bank] &= ~(1 << pin);
 | |
| 
 | |
| 	__gen_74x164_write_config(chip);
 | |
| 	mutex_unlock(&chip->lock);
 | |
| }
 | |
| 
 | |
| static void gen_74x164_set_multiple(struct gpio_chip *gc, unsigned long *mask,
 | |
| 				    unsigned long *bits)
 | |
| {
 | |
| 	struct gen_74x164_chip *chip = gpiochip_get_data(gc);
 | |
| 	unsigned long offset;
 | |
| 	unsigned long bankmask;
 | |
| 	size_t bank;
 | |
| 	unsigned long bitmask;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 	for_each_set_clump8(offset, bankmask, mask, chip->registers * 8) {
 | |
| 		bank = chip->registers - 1 - offset / 8;
 | |
| 		bitmask = bitmap_get_value8(bits, offset) & bankmask;
 | |
| 
 | |
| 		chip->buffer[bank] &= ~bankmask;
 | |
| 		chip->buffer[bank] |= bitmask;
 | |
| 	}
 | |
| 	__gen_74x164_write_config(chip);
 | |
| 	mutex_unlock(&chip->lock);
 | |
| }
 | |
| 
 | |
| static int gen_74x164_direction_output(struct gpio_chip *gc,
 | |
| 		unsigned offset, int val)
 | |
| {
 | |
| 	gen_74x164_set_value(gc, offset, val);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int gen_74x164_probe(struct spi_device *spi)
 | |
| {
 | |
| 	struct gen_74x164_chip *chip;
 | |
| 	u32 nregs;
 | |
| 	int ret;
 | |
| 
 | |
| 	/*
 | |
| 	 * bits_per_word cannot be configured in platform data
 | |
| 	 */
 | |
| 	spi->bits_per_word = 8;
 | |
| 
 | |
| 	ret = spi_setup(spi);
 | |
| 	if (ret < 0)
 | |
| 		return ret;
 | |
| 
 | |
| 	ret = device_property_read_u32(&spi->dev, "registers-number", &nregs);
 | |
| 	if (ret) {
 | |
| 		dev_err(&spi->dev, "Missing 'registers-number' property.\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	chip = devm_kzalloc(&spi->dev, sizeof(*chip) + nregs, GFP_KERNEL);
 | |
| 	if (!chip)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	chip->gpiod_oe = devm_gpiod_get_optional(&spi->dev, "enable",
 | |
| 						 GPIOD_OUT_LOW);
 | |
| 	if (IS_ERR(chip->gpiod_oe))
 | |
| 		return PTR_ERR(chip->gpiod_oe);
 | |
| 
 | |
| 	gpiod_set_value_cansleep(chip->gpiod_oe, 1);
 | |
| 
 | |
| 	spi_set_drvdata(spi, chip);
 | |
| 
 | |
| 	chip->gpio_chip.label = spi->modalias;
 | |
| 	chip->gpio_chip.direction_output = gen_74x164_direction_output;
 | |
| 	chip->gpio_chip.get = gen_74x164_get_value;
 | |
| 	chip->gpio_chip.set = gen_74x164_set_value;
 | |
| 	chip->gpio_chip.set_multiple = gen_74x164_set_multiple;
 | |
| 	chip->gpio_chip.base = -1;
 | |
| 
 | |
| 	chip->registers = nregs;
 | |
| 	chip->gpio_chip.ngpio = GEN_74X164_NUMBER_GPIOS * chip->registers;
 | |
| 
 | |
| 	chip->gpio_chip.can_sleep = true;
 | |
| 	chip->gpio_chip.parent = &spi->dev;
 | |
| 	chip->gpio_chip.owner = THIS_MODULE;
 | |
| 
 | |
| 	mutex_init(&chip->lock);
 | |
| 
 | |
| 	ret = __gen_74x164_write_config(chip);
 | |
| 	if (ret) {
 | |
| 		dev_err(&spi->dev, "Failed writing: %d\n", ret);
 | |
| 		goto exit_destroy;
 | |
| 	}
 | |
| 
 | |
| 	ret = gpiochip_add_data(&chip->gpio_chip, chip);
 | |
| 	if (!ret)
 | |
| 		return 0;
 | |
| 
 | |
| exit_destroy:
 | |
| 	mutex_destroy(&chip->lock);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int gen_74x164_remove(struct spi_device *spi)
 | |
| {
 | |
| 	struct gen_74x164_chip *chip = spi_get_drvdata(spi);
 | |
| 
 | |
| 	gpiod_set_value_cansleep(chip->gpiod_oe, 0);
 | |
| 	gpiochip_remove(&chip->gpio_chip);
 | |
| 	mutex_destroy(&chip->lock);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct of_device_id gen_74x164_dt_ids[] = {
 | |
| 	{ .compatible = "fairchild,74hc595" },
 | |
| 	{ .compatible = "nxp,74lvc594" },
 | |
| 	{},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, gen_74x164_dt_ids);
 | |
| 
 | |
| static struct spi_driver gen_74x164_driver = {
 | |
| 	.driver = {
 | |
| 		.name		= "74x164",
 | |
| 		.of_match_table	= gen_74x164_dt_ids,
 | |
| 	},
 | |
| 	.probe		= gen_74x164_probe,
 | |
| 	.remove		= gen_74x164_remove,
 | |
| };
 | |
| module_spi_driver(gen_74x164_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
 | |
| MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
 | |
| MODULE_DESCRIPTION("GPIO expander driver for 74X164 8-bits shift register");
 | |
| MODULE_LICENSE("GPL v2");
 |