632 lines
		
	
	
		
			15 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			632 lines
		
	
	
		
			15 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * SCOM FSI Client device driver
 | |
|  *
 | |
|  * Copyright (C) IBM Corporation 2016
 | |
|  */
 | |
| 
 | |
| #include <linux/fsi.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/cdev.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/fs.h>
 | |
| #include <linux/uaccess.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/list.h>
 | |
| 
 | |
| #include <uapi/linux/fsi.h>
 | |
| 
 | |
| #define FSI_ENGID_SCOM		0x5
 | |
| 
 | |
| /* SCOM engine register set */
 | |
| #define SCOM_DATA0_REG		0x00
 | |
| #define SCOM_DATA1_REG		0x04
 | |
| #define SCOM_CMD_REG		0x08
 | |
| #define SCOM_FSI2PIB_RESET_REG	0x18
 | |
| #define SCOM_STATUS_REG		0x1C /* Read */
 | |
| #define SCOM_PIB_RESET_REG	0x1C /* Write */
 | |
| 
 | |
| /* Command register */
 | |
| #define SCOM_WRITE_CMD		0x80000000
 | |
| #define SCOM_READ_CMD		0x00000000
 | |
| 
 | |
| /* Status register bits */
 | |
| #define SCOM_STATUS_ERR_SUMMARY		0x80000000
 | |
| #define SCOM_STATUS_PROTECTION		0x01000000
 | |
| #define SCOM_STATUS_PARITY		0x04000000
 | |
| #define SCOM_STATUS_PIB_ABORT		0x00100000
 | |
| #define SCOM_STATUS_PIB_RESP_MASK	0x00007000
 | |
| #define SCOM_STATUS_PIB_RESP_SHIFT	12
 | |
| 
 | |
| #define SCOM_STATUS_FSI2PIB_ERROR	(SCOM_STATUS_PROTECTION |	\
 | |
| 					 SCOM_STATUS_PARITY |		\
 | |
| 					 SCOM_STATUS_PIB_ABORT)
 | |
| #define SCOM_STATUS_ANY_ERR		(SCOM_STATUS_FSI2PIB_ERROR |	\
 | |
| 					 SCOM_STATUS_PIB_RESP_MASK)
 | |
| /* SCOM address encodings */
 | |
| #define XSCOM_ADDR_IND_FLAG		BIT_ULL(63)
 | |
| #define XSCOM_ADDR_INF_FORM1		BIT_ULL(60)
 | |
| 
 | |
| /* SCOM indirect stuff */
 | |
| #define XSCOM_ADDR_DIRECT_PART		0x7fffffffull
 | |
| #define XSCOM_ADDR_INDIRECT_PART	0x000fffff00000000ull
 | |
| #define XSCOM_DATA_IND_READ		BIT_ULL(63)
 | |
| #define XSCOM_DATA_IND_COMPLETE		BIT_ULL(31)
 | |
| #define XSCOM_DATA_IND_ERR_MASK		0x70000000ull
 | |
| #define XSCOM_DATA_IND_ERR_SHIFT	28
 | |
| #define XSCOM_DATA_IND_DATA		0x0000ffffull
 | |
| #define XSCOM_DATA_IND_FORM1_DATA	0x000fffffffffffffull
 | |
| #define XSCOM_ADDR_FORM1_LOW		0x000ffffffffull
 | |
| #define XSCOM_ADDR_FORM1_HI		0xfff00000000ull
 | |
| #define XSCOM_ADDR_FORM1_HI_SHIFT	20
 | |
| 
 | |
| /* Retries */
 | |
| #define SCOM_MAX_IND_RETRIES		10	/* Retries indirect not ready */
 | |
| 
 | |
| struct scom_device {
 | |
| 	struct list_head link;
 | |
| 	struct fsi_device *fsi_dev;
 | |
| 	struct device dev;
 | |
| 	struct cdev cdev;
 | |
| 	struct mutex lock;
 | |
| 	bool dead;
 | |
| };
 | |
| 
 | |
| static int __put_scom(struct scom_device *scom_dev, uint64_t value,
 | |
| 		      uint32_t addr, uint32_t *status)
 | |
| {
 | |
| 	__be32 data, raw_status;
 | |
| 	int rc;
 | |
| 
 | |
| 	data = cpu_to_be32((value >> 32) & 0xffffffff);
 | |
| 	rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
 | |
| 				sizeof(uint32_t));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	data = cpu_to_be32(value & 0xffffffff);
 | |
| 	rc = fsi_device_write(scom_dev->fsi_dev, SCOM_DATA1_REG, &data,
 | |
| 				sizeof(uint32_t));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	data = cpu_to_be32(SCOM_WRITE_CMD | addr);
 | |
| 	rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
 | |
| 				sizeof(uint32_t));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status,
 | |
| 			     sizeof(uint32_t));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	*status = be32_to_cpu(raw_status);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int __get_scom(struct scom_device *scom_dev, uint64_t *value,
 | |
| 		      uint32_t addr, uint32_t *status)
 | |
| {
 | |
| 	__be32 data, raw_status;
 | |
| 	int rc;
 | |
| 
 | |
| 
 | |
| 	*value = 0ULL;
 | |
| 	data = cpu_to_be32(SCOM_READ_CMD | addr);
 | |
| 	rc = fsi_device_write(scom_dev->fsi_dev, SCOM_CMD_REG, &data,
 | |
| 				sizeof(uint32_t));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	rc = fsi_device_read(scom_dev->fsi_dev, SCOM_STATUS_REG, &raw_status,
 | |
| 			     sizeof(uint32_t));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	/*
 | |
| 	 * Read the data registers even on error, so we don't have
 | |
| 	 * to interpret the status register here.
 | |
| 	 */
 | |
| 	rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA0_REG, &data,
 | |
| 				sizeof(uint32_t));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	*value |= (uint64_t)be32_to_cpu(data) << 32;
 | |
| 	rc = fsi_device_read(scom_dev->fsi_dev, SCOM_DATA1_REG, &data,
 | |
| 				sizeof(uint32_t));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	*value |= be32_to_cpu(data);
 | |
| 	*status = be32_to_cpu(raw_status);
 | |
| 
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int put_indirect_scom_form0(struct scom_device *scom, uint64_t value,
 | |
| 				   uint64_t addr, uint32_t *status)
 | |
| {
 | |
| 	uint64_t ind_data, ind_addr;
 | |
| 	int rc, retries, err = 0;
 | |
| 
 | |
| 	if (value & ~XSCOM_DATA_IND_DATA)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ind_addr = addr & XSCOM_ADDR_DIRECT_PART;
 | |
| 	ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | value;
 | |
| 	rc = __put_scom(scom, ind_data, ind_addr, status);
 | |
| 	if (rc || (*status & SCOM_STATUS_ANY_ERR))
 | |
| 		return rc;
 | |
| 
 | |
| 	for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) {
 | |
| 		rc = __get_scom(scom, &ind_data, addr, status);
 | |
| 		if (rc || (*status & SCOM_STATUS_ANY_ERR))
 | |
| 			return rc;
 | |
| 
 | |
| 		err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
 | |
| 		*status = err << SCOM_STATUS_PIB_RESP_SHIFT;
 | |
| 		if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
 | |
| 			return 0;
 | |
| 
 | |
| 		msleep(1);
 | |
| 	}
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int put_indirect_scom_form1(struct scom_device *scom, uint64_t value,
 | |
| 				   uint64_t addr, uint32_t *status)
 | |
| {
 | |
| 	uint64_t ind_data, ind_addr;
 | |
| 
 | |
| 	if (value & ~XSCOM_DATA_IND_FORM1_DATA)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	ind_addr = addr & XSCOM_ADDR_FORM1_LOW;
 | |
| 	ind_data = value | (addr & XSCOM_ADDR_FORM1_HI) << XSCOM_ADDR_FORM1_HI_SHIFT;
 | |
| 	return __put_scom(scom, ind_data, ind_addr, status);
 | |
| }
 | |
| 
 | |
| static int get_indirect_scom_form0(struct scom_device *scom, uint64_t *value,
 | |
| 				   uint64_t addr, uint32_t *status)
 | |
| {
 | |
| 	uint64_t ind_data, ind_addr;
 | |
| 	int rc, retries, err = 0;
 | |
| 
 | |
| 	ind_addr = addr & XSCOM_ADDR_DIRECT_PART;
 | |
| 	ind_data = (addr & XSCOM_ADDR_INDIRECT_PART) | XSCOM_DATA_IND_READ;
 | |
| 	rc = __put_scom(scom, ind_data, ind_addr, status);
 | |
| 	if (rc || (*status & SCOM_STATUS_ANY_ERR))
 | |
| 		return rc;
 | |
| 
 | |
| 	for (retries = 0; retries < SCOM_MAX_IND_RETRIES; retries++) {
 | |
| 		rc = __get_scom(scom, &ind_data, addr, status);
 | |
| 		if (rc || (*status & SCOM_STATUS_ANY_ERR))
 | |
| 			return rc;
 | |
| 
 | |
| 		err = (ind_data & XSCOM_DATA_IND_ERR_MASK) >> XSCOM_DATA_IND_ERR_SHIFT;
 | |
| 		*status = err << SCOM_STATUS_PIB_RESP_SHIFT;
 | |
| 		*value = ind_data & XSCOM_DATA_IND_DATA;
 | |
| 
 | |
| 		if ((ind_data & XSCOM_DATA_IND_COMPLETE) || (err != SCOM_PIB_BLOCKED))
 | |
| 			return 0;
 | |
| 
 | |
| 		msleep(1);
 | |
| 	}
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int raw_put_scom(struct scom_device *scom, uint64_t value,
 | |
| 			uint64_t addr, uint32_t *status)
 | |
| {
 | |
| 	if (addr & XSCOM_ADDR_IND_FLAG) {
 | |
| 		if (addr & XSCOM_ADDR_INF_FORM1)
 | |
| 			return put_indirect_scom_form1(scom, value, addr, status);
 | |
| 		else
 | |
| 			return put_indirect_scom_form0(scom, value, addr, status);
 | |
| 	} else
 | |
| 		return __put_scom(scom, value, addr, status);
 | |
| }
 | |
| 
 | |
| static int raw_get_scom(struct scom_device *scom, uint64_t *value,
 | |
| 			uint64_t addr, uint32_t *status)
 | |
| {
 | |
| 	if (addr & XSCOM_ADDR_IND_FLAG) {
 | |
| 		if (addr & XSCOM_ADDR_INF_FORM1)
 | |
| 			return -ENXIO;
 | |
| 		return get_indirect_scom_form0(scom, value, addr, status);
 | |
| 	} else
 | |
| 		return __get_scom(scom, value, addr, status);
 | |
| }
 | |
| 
 | |
| static int handle_fsi2pib_status(struct scom_device *scom, uint32_t status)
 | |
| {
 | |
| 	uint32_t dummy = -1;
 | |
| 
 | |
| 	if (status & SCOM_STATUS_FSI2PIB_ERROR)
 | |
| 		fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
 | |
| 				 sizeof(uint32_t));
 | |
| 
 | |
| 	if (status & SCOM_STATUS_PROTECTION)
 | |
| 		return -EPERM;
 | |
| 	if (status & SCOM_STATUS_PARITY)
 | |
| 		return -EIO;
 | |
| 
 | |
| 	if (status & SCOM_STATUS_PIB_ABORT)
 | |
| 		return -EBUSY;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int handle_pib_status(struct scom_device *scom, uint8_t status)
 | |
| {
 | |
| 	uint32_t dummy = -1;
 | |
| 
 | |
| 	if (status == SCOM_PIB_SUCCESS)
 | |
| 		return 0;
 | |
| 	if (status == SCOM_PIB_BLOCKED)
 | |
| 		return -EBUSY;
 | |
| 
 | |
| 	/* Reset the bridge */
 | |
| 	fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
 | |
| 			 sizeof(uint32_t));
 | |
| 
 | |
| 	switch(status) {
 | |
| 	case SCOM_PIB_OFFLINE:
 | |
| 		return -ENODEV;
 | |
| 	case SCOM_PIB_BAD_ADDR:
 | |
| 		return -ENXIO;
 | |
| 	case SCOM_PIB_TIMEOUT:
 | |
| 		return -ETIMEDOUT;
 | |
| 	case SCOM_PIB_PARTIAL:
 | |
| 	case SCOM_PIB_CLK_ERR:
 | |
| 	case SCOM_PIB_PARITY_ERR:
 | |
| 	default:
 | |
| 		return -EIO;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static int put_scom(struct scom_device *scom, uint64_t value,
 | |
| 		    uint64_t addr)
 | |
| {
 | |
| 	uint32_t status;
 | |
| 	int rc;
 | |
| 
 | |
| 	rc = raw_put_scom(scom, value, addr, &status);
 | |
| 	if (rc == -ENODEV)
 | |
| 		return rc;
 | |
| 
 | |
| 	rc = handle_fsi2pib_status(scom, status);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	return handle_pib_status(scom,
 | |
| 				 (status & SCOM_STATUS_PIB_RESP_MASK)
 | |
| 				 >> SCOM_STATUS_PIB_RESP_SHIFT);
 | |
| }
 | |
| 
 | |
| static int get_scom(struct scom_device *scom, uint64_t *value,
 | |
| 		    uint64_t addr)
 | |
| {
 | |
| 	uint32_t status;
 | |
| 	int rc;
 | |
| 
 | |
| 	rc = raw_get_scom(scom, value, addr, &status);
 | |
| 	if (rc == -ENODEV)
 | |
| 		return rc;
 | |
| 
 | |
| 	rc = handle_fsi2pib_status(scom, status);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	return handle_pib_status(scom,
 | |
| 				 (status & SCOM_STATUS_PIB_RESP_MASK)
 | |
| 				 >> SCOM_STATUS_PIB_RESP_SHIFT);
 | |
| }
 | |
| 
 | |
| static ssize_t scom_read(struct file *filep, char __user *buf, size_t len,
 | |
| 			 loff_t *offset)
 | |
| {
 | |
| 	struct scom_device *scom = filep->private_data;
 | |
| 	struct device *dev = &scom->fsi_dev->dev;
 | |
| 	uint64_t val;
 | |
| 	int rc;
 | |
| 
 | |
| 	if (len != sizeof(uint64_t))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	mutex_lock(&scom->lock);
 | |
| 	if (scom->dead)
 | |
| 		rc = -ENODEV;
 | |
| 	else
 | |
| 		rc = get_scom(scom, &val, *offset);
 | |
| 	mutex_unlock(&scom->lock);
 | |
| 	if (rc) {
 | |
| 		dev_dbg(dev, "get_scom fail:%d\n", rc);
 | |
| 		return rc;
 | |
| 	}
 | |
| 
 | |
| 	rc = copy_to_user(buf, &val, len);
 | |
| 	if (rc)
 | |
| 		dev_dbg(dev, "copy to user failed:%d\n", rc);
 | |
| 
 | |
| 	return rc ? rc : len;
 | |
| }
 | |
| 
 | |
| static ssize_t scom_write(struct file *filep, const char __user *buf,
 | |
| 			  size_t len, loff_t *offset)
 | |
| {
 | |
| 	int rc;
 | |
| 	struct scom_device *scom = filep->private_data;
 | |
| 	struct device *dev = &scom->fsi_dev->dev;
 | |
| 	uint64_t val;
 | |
| 
 | |
| 	if (len != sizeof(uint64_t))
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	rc = copy_from_user(&val, buf, len);
 | |
| 	if (rc) {
 | |
| 		dev_dbg(dev, "copy from user failed:%d\n", rc);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	mutex_lock(&scom->lock);
 | |
| 	if (scom->dead)
 | |
| 		rc = -ENODEV;
 | |
| 	else
 | |
| 		rc = put_scom(scom, val, *offset);
 | |
| 	mutex_unlock(&scom->lock);
 | |
| 	if (rc) {
 | |
| 		dev_dbg(dev, "put_scom failed with:%d\n", rc);
 | |
| 		return rc;
 | |
| 	}
 | |
| 
 | |
| 	return len;
 | |
| }
 | |
| 
 | |
| static loff_t scom_llseek(struct file *file, loff_t offset, int whence)
 | |
| {
 | |
| 	switch (whence) {
 | |
| 	case SEEK_CUR:
 | |
| 		break;
 | |
| 	case SEEK_SET:
 | |
| 		file->f_pos = offset;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	return offset;
 | |
| }
 | |
| 
 | |
| static void raw_convert_status(struct scom_access *acc, uint32_t status)
 | |
| {
 | |
| 	acc->pib_status = (status & SCOM_STATUS_PIB_RESP_MASK) >>
 | |
| 		SCOM_STATUS_PIB_RESP_SHIFT;
 | |
| 	acc->intf_errors = 0;
 | |
| 
 | |
| 	if (status & SCOM_STATUS_PROTECTION)
 | |
| 		acc->intf_errors |= SCOM_INTF_ERR_PROTECTION;
 | |
| 	else if (status & SCOM_STATUS_PARITY)
 | |
| 		acc->intf_errors |= SCOM_INTF_ERR_PARITY;
 | |
| 	else if (status & SCOM_STATUS_PIB_ABORT)
 | |
| 		acc->intf_errors |= SCOM_INTF_ERR_ABORT;
 | |
| 	else if (status & SCOM_STATUS_ERR_SUMMARY)
 | |
| 		acc->intf_errors |= SCOM_INTF_ERR_UNKNOWN;
 | |
| }
 | |
| 
 | |
| static int scom_raw_read(struct scom_device *scom, void __user *argp)
 | |
| {
 | |
| 	struct scom_access acc;
 | |
| 	uint32_t status;
 | |
| 	int rc;
 | |
| 
 | |
| 	if (copy_from_user(&acc, argp, sizeof(struct scom_access)))
 | |
| 		return -EFAULT;
 | |
| 
 | |
| 	rc = raw_get_scom(scom, &acc.data, acc.addr, &status);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 	raw_convert_status(&acc, status);
 | |
| 	if (copy_to_user(argp, &acc, sizeof(struct scom_access)))
 | |
| 		return -EFAULT;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int scom_raw_write(struct scom_device *scom, void __user *argp)
 | |
| {
 | |
| 	u64 prev_data, mask, data;
 | |
| 	struct scom_access acc;
 | |
| 	uint32_t status;
 | |
| 	int rc;
 | |
| 
 | |
| 	if (copy_from_user(&acc, argp, sizeof(struct scom_access)))
 | |
| 		return -EFAULT;
 | |
| 
 | |
| 	if (acc.mask) {
 | |
| 		rc = raw_get_scom(scom, &prev_data, acc.addr, &status);
 | |
| 		if (rc)
 | |
| 			return rc;
 | |
| 		if (status & SCOM_STATUS_ANY_ERR)
 | |
| 			goto fail;
 | |
| 		mask = acc.mask;
 | |
| 	} else {
 | |
| 		prev_data = mask = -1ull;
 | |
| 	}
 | |
| 	data = (prev_data & ~mask) | (acc.data & mask);
 | |
| 	rc = raw_put_scom(scom, data, acc.addr, &status);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
|  fail:
 | |
| 	raw_convert_status(&acc, status);
 | |
| 	if (copy_to_user(argp, &acc, sizeof(struct scom_access)))
 | |
| 		return -EFAULT;
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int scom_reset(struct scom_device *scom, void __user *argp)
 | |
| {
 | |
| 	uint32_t flags, dummy = -1;
 | |
| 	int rc = 0;
 | |
| 
 | |
| 	if (get_user(flags, (__u32 __user *)argp))
 | |
| 		return -EFAULT;
 | |
| 	if (flags & SCOM_RESET_PIB)
 | |
| 		rc = fsi_device_write(scom->fsi_dev, SCOM_PIB_RESET_REG, &dummy,
 | |
| 				      sizeof(uint32_t));
 | |
| 	if (!rc && (flags & (SCOM_RESET_PIB | SCOM_RESET_INTF)))
 | |
| 		rc = fsi_device_write(scom->fsi_dev, SCOM_FSI2PIB_RESET_REG, &dummy,
 | |
| 				      sizeof(uint32_t));
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int scom_check(struct scom_device *scom, void __user *argp)
 | |
| {
 | |
| 	/* Still need to find out how to get "protected" */
 | |
| 	return put_user(SCOM_CHECK_SUPPORTED, (__u32 __user *)argp);
 | |
| }
 | |
| 
 | |
| static long scom_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 | |
| {
 | |
| 	struct scom_device *scom = file->private_data;
 | |
| 	void __user *argp = (void __user *)arg;
 | |
| 	int rc = -ENOTTY;
 | |
| 
 | |
| 	mutex_lock(&scom->lock);
 | |
| 	if (scom->dead) {
 | |
| 		mutex_unlock(&scom->lock);
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 	switch(cmd) {
 | |
| 	case FSI_SCOM_CHECK:
 | |
| 		rc = scom_check(scom, argp);
 | |
| 		break;
 | |
| 	case FSI_SCOM_READ:
 | |
| 		rc = scom_raw_read(scom, argp);
 | |
| 		break;
 | |
| 	case FSI_SCOM_WRITE:
 | |
| 		rc = scom_raw_write(scom, argp);
 | |
| 		break;
 | |
| 	case FSI_SCOM_RESET:
 | |
| 		rc = scom_reset(scom, argp);
 | |
| 		break;
 | |
| 	}
 | |
| 	mutex_unlock(&scom->lock);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int scom_open(struct inode *inode, struct file *file)
 | |
| {
 | |
| 	struct scom_device *scom = container_of(inode->i_cdev, struct scom_device, cdev);
 | |
| 
 | |
| 	file->private_data = scom;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct file_operations scom_fops = {
 | |
| 	.owner		= THIS_MODULE,
 | |
| 	.open		= scom_open,
 | |
| 	.llseek		= scom_llseek,
 | |
| 	.read		= scom_read,
 | |
| 	.write		= scom_write,
 | |
| 	.unlocked_ioctl	= scom_ioctl,
 | |
| };
 | |
| 
 | |
| static void scom_free(struct device *dev)
 | |
| {
 | |
| 	struct scom_device *scom = container_of(dev, struct scom_device, dev);
 | |
| 
 | |
| 	put_device(&scom->fsi_dev->dev);
 | |
| 	kfree(scom);
 | |
| }
 | |
| 
 | |
| static int scom_probe(struct device *dev)
 | |
| {
 | |
| 	struct fsi_device *fsi_dev = to_fsi_dev(dev);
 | |
| 	struct scom_device *scom;
 | |
| 	int rc, didx;
 | |
| 
 | |
| 	scom = kzalloc(sizeof(*scom), GFP_KERNEL);
 | |
| 	if (!scom)
 | |
| 		return -ENOMEM;
 | |
| 	dev_set_drvdata(dev, scom);
 | |
| 	mutex_init(&scom->lock);
 | |
| 
 | |
| 	/* Grab a reference to the device (parent of our cdev), we'll drop it later */
 | |
| 	if (!get_device(dev)) {
 | |
| 		kfree(scom);
 | |
| 		return -ENODEV;
 | |
| 	}
 | |
| 	scom->fsi_dev = fsi_dev;
 | |
| 
 | |
| 	/* Create chardev for userspace access */
 | |
| 	scom->dev.type = &fsi_cdev_type;
 | |
| 	scom->dev.parent = dev;
 | |
| 	scom->dev.release = scom_free;
 | |
| 	device_initialize(&scom->dev);
 | |
| 
 | |
| 	/* Allocate a minor in the FSI space */
 | |
| 	rc = fsi_get_new_minor(fsi_dev, fsi_dev_scom, &scom->dev.devt, &didx);
 | |
| 	if (rc)
 | |
| 		goto err;
 | |
| 
 | |
| 	dev_set_name(&scom->dev, "scom%d", didx);
 | |
| 	cdev_init(&scom->cdev, &scom_fops);
 | |
| 	rc = cdev_device_add(&scom->cdev, &scom->dev);
 | |
| 	if (rc) {
 | |
| 		dev_err(dev, "Error %d creating char device %s\n",
 | |
| 			rc, dev_name(&scom->dev));
 | |
| 		goto err_free_minor;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
|  err_free_minor:
 | |
| 	fsi_free_minor(scom->dev.devt);
 | |
|  err:
 | |
| 	put_device(&scom->dev);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int scom_remove(struct device *dev)
 | |
| {
 | |
| 	struct scom_device *scom = dev_get_drvdata(dev);
 | |
| 
 | |
| 	mutex_lock(&scom->lock);
 | |
| 	scom->dead = true;
 | |
| 	mutex_unlock(&scom->lock);
 | |
| 	cdev_device_del(&scom->cdev, &scom->dev);
 | |
| 	fsi_free_minor(scom->dev.devt);
 | |
| 	put_device(&scom->dev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct fsi_device_id scom_ids[] = {
 | |
| 	{
 | |
| 		.engine_type = FSI_ENGID_SCOM,
 | |
| 		.version = FSI_VERSION_ANY,
 | |
| 	},
 | |
| 	{ 0 }
 | |
| };
 | |
| 
 | |
| static struct fsi_driver scom_drv = {
 | |
| 	.id_table = scom_ids,
 | |
| 	.drv = {
 | |
| 		.name = "scom",
 | |
| 		.bus = &fsi_bus_type,
 | |
| 		.probe = scom_probe,
 | |
| 		.remove = scom_remove,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| static int scom_init(void)
 | |
| {
 | |
| 	return fsi_driver_register(&scom_drv);
 | |
| }
 | |
| 
 | |
| static void scom_exit(void)
 | |
| {
 | |
| 	fsi_driver_unregister(&scom_drv);
 | |
| }
 | |
| 
 | |
| module_init(scom_init);
 | |
| module_exit(scom_exit);
 | |
| MODULE_LICENSE("GPL");
 |