299 lines
		
	
	
		
			7.3 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			299 lines
		
	
	
		
			7.3 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * FSI hub master driver
 | |
|  *
 | |
|  * Copyright (C) IBM Corporation 2016
 | |
|  */
 | |
| 
 | |
| #include <linux/delay.h>
 | |
| #include <linux/fsi.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| #include "fsi-master.h"
 | |
| 
 | |
| #define FSI_ENGID_HUB_MASTER		0x1c
 | |
| 
 | |
| #define FSI_LINK_ENABLE_SETUP_TIME	10	/* in mS */
 | |
| 
 | |
| /*
 | |
|  * FSI hub master support
 | |
|  *
 | |
|  * A hub master increases the number of potential target devices that the
 | |
|  * primary FSI master can access. For each link a primary master supports,
 | |
|  * each of those links can in turn be chained to a hub master with multiple
 | |
|  * links of its own.
 | |
|  *
 | |
|  * The hub is controlled by a set of control registers exposed as a regular fsi
 | |
|  * device (the hub->upstream device), and provides access to the downstream FSI
 | |
|  * bus as through an address range on the slave itself (->addr and ->size).
 | |
|  *
 | |
|  * [This differs from "cascaded" masters, which expose the entire downstream
 | |
|  * bus entirely through the fsi device address range, and so have a smaller
 | |
|  * accessible address space.]
 | |
|  */
 | |
| struct fsi_master_hub {
 | |
| 	struct fsi_master	master;
 | |
| 	struct fsi_device	*upstream;
 | |
| 	uint32_t		addr, size;	/* slave-relative addr of */
 | |
| 						/* master address space */
 | |
| };
 | |
| 
 | |
| #define to_fsi_master_hub(m) container_of(m, struct fsi_master_hub, master)
 | |
| 
 | |
| static int hub_master_read(struct fsi_master *master, int link,
 | |
| 			uint8_t id, uint32_t addr, void *val, size_t size)
 | |
| {
 | |
| 	struct fsi_master_hub *hub = to_fsi_master_hub(master);
 | |
| 
 | |
| 	if (id != 0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
 | |
| 	return fsi_slave_read(hub->upstream->slave, addr, val, size);
 | |
| }
 | |
| 
 | |
| static int hub_master_write(struct fsi_master *master, int link,
 | |
| 			uint8_t id, uint32_t addr, const void *val, size_t size)
 | |
| {
 | |
| 	struct fsi_master_hub *hub = to_fsi_master_hub(master);
 | |
| 
 | |
| 	if (id != 0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	addr += hub->addr + (link * FSI_HUB_LINK_SIZE);
 | |
| 	return fsi_slave_write(hub->upstream->slave, addr, val, size);
 | |
| }
 | |
| 
 | |
| static int hub_master_break(struct fsi_master *master, int link)
 | |
| {
 | |
| 	uint32_t addr;
 | |
| 	__be32 cmd;
 | |
| 
 | |
| 	addr = 0x4;
 | |
| 	cmd = cpu_to_be32(0xc0de0000);
 | |
| 
 | |
| 	return hub_master_write(master, link, 0, addr, &cmd, sizeof(cmd));
 | |
| }
 | |
| 
 | |
| static int hub_master_link_enable(struct fsi_master *master, int link,
 | |
| 				  bool enable)
 | |
| {
 | |
| 	struct fsi_master_hub *hub = to_fsi_master_hub(master);
 | |
| 	int idx, bit;
 | |
| 	__be32 reg;
 | |
| 	int rc;
 | |
| 
 | |
| 	idx = link / 32;
 | |
| 	bit = link % 32;
 | |
| 
 | |
| 	reg = cpu_to_be32(0x80000000 >> bit);
 | |
| 
 | |
| 	if (!enable)
 | |
| 		return fsi_device_write(hub->upstream, FSI_MCENP0 + (4 * idx),
 | |
| 					®, 4);
 | |
| 
 | |
| 	rc = fsi_device_write(hub->upstream, FSI_MSENP0 + (4 * idx), ®, 4);
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	mdelay(FSI_LINK_ENABLE_SETUP_TIME);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void hub_master_release(struct device *dev)
 | |
| {
 | |
| 	struct fsi_master_hub *hub = to_fsi_master_hub(dev_to_fsi_master(dev));
 | |
| 
 | |
| 	kfree(hub);
 | |
| }
 | |
| 
 | |
| /* mmode encoders */
 | |
| static inline u32 fsi_mmode_crs0(u32 x)
 | |
| {
 | |
| 	return (x & FSI_MMODE_CRS0MASK) << FSI_MMODE_CRS0SHFT;
 | |
| }
 | |
| 
 | |
| static inline u32 fsi_mmode_crs1(u32 x)
 | |
| {
 | |
| 	return (x & FSI_MMODE_CRS1MASK) << FSI_MMODE_CRS1SHFT;
 | |
| }
 | |
| 
 | |
| static int hub_master_init(struct fsi_master_hub *hub)
 | |
| {
 | |
| 	struct fsi_device *dev = hub->upstream;
 | |
| 	__be32 reg;
 | |
| 	int rc;
 | |
| 
 | |
| 	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
 | |
| 			| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
 | |
| 	rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	/* Initialize the MFSI (hub master) engine */
 | |
| 	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK
 | |
| 			| FSI_MRESP_RST_MCR | FSI_MRESP_RST_PYE);
 | |
| 	rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	reg = cpu_to_be32(FSI_MECTRL_EOAE | FSI_MECTRL_P8_AUTO_TERM);
 | |
| 	rc = fsi_device_write(dev, FSI_MECTRL, ®, sizeof(reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	reg = cpu_to_be32(FSI_MMODE_EIP | FSI_MMODE_ECRC | FSI_MMODE_EPC
 | |
| 			| fsi_mmode_crs0(1) | fsi_mmode_crs1(1)
 | |
| 			| FSI_MMODE_P8_TO_LSB);
 | |
| 	rc = fsi_device_write(dev, FSI_MMODE, ®, sizeof(reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	reg = cpu_to_be32(0xffff0000);
 | |
| 	rc = fsi_device_write(dev, FSI_MDLYR, ®, sizeof(reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	reg = cpu_to_be32(~0);
 | |
| 	rc = fsi_device_write(dev, FSI_MSENP0, ®, sizeof(reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	/* Leave enabled long enough for master logic to set up */
 | |
| 	mdelay(FSI_LINK_ENABLE_SETUP_TIME);
 | |
| 
 | |
| 	rc = fsi_device_write(dev, FSI_MCENP0, ®, sizeof(reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	rc = fsi_device_read(dev, FSI_MAEB, ®, sizeof(reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	reg = cpu_to_be32(FSI_MRESP_RST_ALL_MASTER | FSI_MRESP_RST_ALL_LINK);
 | |
| 	rc = fsi_device_write(dev, FSI_MRESP0, ®, sizeof(reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	rc = fsi_device_read(dev, FSI_MLEVP0, ®, sizeof(reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	/* Reset the master bridge */
 | |
| 	reg = cpu_to_be32(FSI_MRESB_RST_GEN);
 | |
| 	rc = fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	reg = cpu_to_be32(FSI_MRESB_RST_ERR);
 | |
| 	return fsi_device_write(dev, FSI_MRESB0, ®, sizeof(reg));
 | |
| }
 | |
| 
 | |
| static int hub_master_probe(struct device *dev)
 | |
| {
 | |
| 	struct fsi_device *fsi_dev = to_fsi_dev(dev);
 | |
| 	struct fsi_master_hub *hub;
 | |
| 	uint32_t reg, links;
 | |
| 	__be32 __reg;
 | |
| 	int rc;
 | |
| 
 | |
| 	rc = fsi_device_read(fsi_dev, FSI_MVER, &__reg, sizeof(__reg));
 | |
| 	if (rc)
 | |
| 		return rc;
 | |
| 
 | |
| 	reg = be32_to_cpu(__reg);
 | |
| 	links = (reg >> 8) & 0xff;
 | |
| 	dev_dbg(dev, "hub version %08x (%d links)\n", reg, links);
 | |
| 
 | |
| 	rc = fsi_slave_claim_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
 | |
| 			FSI_HUB_LINK_SIZE * links);
 | |
| 	if (rc) {
 | |
| 		dev_err(dev, "can't claim slave address range for links");
 | |
| 		return rc;
 | |
| 	}
 | |
| 
 | |
| 	hub = kzalloc(sizeof(*hub), GFP_KERNEL);
 | |
| 	if (!hub) {
 | |
| 		rc = -ENOMEM;
 | |
| 		goto err_release;
 | |
| 	}
 | |
| 
 | |
| 	hub->addr = FSI_HUB_LINK_OFFSET;
 | |
| 	hub->size = FSI_HUB_LINK_SIZE * links;
 | |
| 	hub->upstream = fsi_dev;
 | |
| 
 | |
| 	hub->master.dev.parent = dev;
 | |
| 	hub->master.dev.release = hub_master_release;
 | |
| 	hub->master.dev.of_node = of_node_get(dev_of_node(dev));
 | |
| 
 | |
| 	hub->master.n_links = links;
 | |
| 	hub->master.read = hub_master_read;
 | |
| 	hub->master.write = hub_master_write;
 | |
| 	hub->master.send_break = hub_master_break;
 | |
| 	hub->master.link_enable = hub_master_link_enable;
 | |
| 
 | |
| 	dev_set_drvdata(dev, hub);
 | |
| 
 | |
| 	hub_master_init(hub);
 | |
| 
 | |
| 	rc = fsi_master_register(&hub->master);
 | |
| 	if (rc)
 | |
| 		goto err_release;
 | |
| 
 | |
| 	/* At this point, fsi_master_register performs the device_initialize(),
 | |
| 	 * and holds the sole reference on master.dev. This means the device
 | |
| 	 * will be freed (via ->release) during any subsequent call to
 | |
| 	 * fsi_master_unregister.  We add our own reference to it here, so we
 | |
| 	 * can perform cleanup (in _remove()) without it being freed before
 | |
| 	 * we're ready.
 | |
| 	 */
 | |
| 	get_device(&hub->master.dev);
 | |
| 	return 0;
 | |
| 
 | |
| err_release:
 | |
| 	fsi_slave_release_range(fsi_dev->slave, FSI_HUB_LINK_OFFSET,
 | |
| 			FSI_HUB_LINK_SIZE * links);
 | |
| 	return rc;
 | |
| }
 | |
| 
 | |
| static int hub_master_remove(struct device *dev)
 | |
| {
 | |
| 	struct fsi_master_hub *hub = dev_get_drvdata(dev);
 | |
| 
 | |
| 	fsi_master_unregister(&hub->master);
 | |
| 	fsi_slave_release_range(hub->upstream->slave, hub->addr, hub->size);
 | |
| 	of_node_put(hub->master.dev.of_node);
 | |
| 
 | |
| 	/*
 | |
| 	 * master.dev will likely be ->release()ed after this, which free()s
 | |
| 	 * the hub
 | |
| 	 */
 | |
| 	put_device(&hub->master.dev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct fsi_device_id hub_master_ids[] = {
 | |
| 	{
 | |
| 		.engine_type = FSI_ENGID_HUB_MASTER,
 | |
| 		.version = FSI_VERSION_ANY,
 | |
| 	},
 | |
| 	{ 0 }
 | |
| };
 | |
| 
 | |
| static struct fsi_driver hub_master_driver = {
 | |
| 	.id_table = hub_master_ids,
 | |
| 	.drv = {
 | |
| 		.name = "fsi-master-hub",
 | |
| 		.bus = &fsi_bus_type,
 | |
| 		.probe = hub_master_probe,
 | |
| 		.remove = hub_master_remove,
 | |
| 	}
 | |
| };
 | |
| 
 | |
| module_fsi_driver(hub_master_driver);
 | |
| MODULE_LICENSE("GPL");
 |