302 lines
		
	
	
		
			7.2 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			302 lines
		
	
	
		
			7.2 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| // Copyright (c) 2018-2020, Intel Corporation
 | |
| //
 | |
| // sof-wm8804.c - ASoC machine driver for Up and Up2 board
 | |
| // based on WM8804/Hifiberry Digi+
 | |
| 
 | |
| 
 | |
| #include <linux/acpi.h>
 | |
| #include <linux/dmi.h>
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/gpio/machine.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/slab.h>
 | |
| #include <sound/pcm.h>
 | |
| #include <sound/pcm_params.h>
 | |
| #include <sound/soc.h>
 | |
| #include <sound/soc-acpi.h>
 | |
| #include "../../codecs/wm8804.h"
 | |
| 
 | |
| struct sof_card_private {
 | |
| 	struct gpio_desc *gpio_44;
 | |
| 	struct gpio_desc *gpio_48;
 | |
| 	int sample_rate;
 | |
| };
 | |
| 
 | |
| #define SOF_WM8804_UP2_QUIRK			BIT(0)
 | |
| 
 | |
| static unsigned long sof_wm8804_quirk;
 | |
| 
 | |
| static int sof_wm8804_quirk_cb(const struct dmi_system_id *id)
 | |
| {
 | |
| 	sof_wm8804_quirk = (unsigned long)id->driver_data;
 | |
| 	return 1;
 | |
| }
 | |
| 
 | |
| static const struct dmi_system_id sof_wm8804_quirk_table[] = {
 | |
| 	{
 | |
| 		.callback = sof_wm8804_quirk_cb,
 | |
| 		.matches = {
 | |
| 			DMI_MATCH(DMI_SYS_VENDOR, "AAEON"),
 | |
| 			DMI_MATCH(DMI_PRODUCT_NAME, "UP-APL01"),
 | |
| 		},
 | |
| 		.driver_data = (void *)SOF_WM8804_UP2_QUIRK,
 | |
| 	},
 | |
| 	{}
 | |
| };
 | |
| 
 | |
| static int sof_wm8804_hw_params(struct snd_pcm_substream *substream,
 | |
| 				struct snd_pcm_hw_params *params)
 | |
| {
 | |
| 	struct snd_soc_pcm_runtime *rtd = asoc_substream_to_rtd(substream);
 | |
| 	struct sof_card_private *ctx = snd_soc_card_get_drvdata(rtd->card);
 | |
| 	struct snd_soc_dai *codec_dai = asoc_rtd_to_codec(rtd, 0);
 | |
| 	struct snd_soc_component *codec = codec_dai->component;
 | |
| 	const int sysclk = 27000000; /* This is fixed on this board */
 | |
| 	int samplerate;
 | |
| 	long mclk_freq;
 | |
| 	int mclk_div;
 | |
| 	int sampling_freq;
 | |
| 	bool clk_44;
 | |
| 	int ret;
 | |
| 
 | |
| 	samplerate = params_rate(params);
 | |
| 	if (samplerate == ctx->sample_rate)
 | |
| 		return 0;
 | |
| 
 | |
| 	ctx->sample_rate = 0;
 | |
| 
 | |
| 	if (samplerate <= 96000) {
 | |
| 		mclk_freq = samplerate * 256;
 | |
| 		mclk_div = WM8804_MCLKDIV_256FS;
 | |
| 	} else {
 | |
| 		mclk_freq = samplerate * 128;
 | |
| 		mclk_div = WM8804_MCLKDIV_128FS;
 | |
| 	}
 | |
| 
 | |
| 	switch (samplerate) {
 | |
| 	case 32000:
 | |
| 		sampling_freq = 0x03;
 | |
| 		break;
 | |
| 	case 44100:
 | |
| 		sampling_freq = 0x00;
 | |
| 		break;
 | |
| 	case 48000:
 | |
| 		sampling_freq = 0x02;
 | |
| 		break;
 | |
| 	case 88200:
 | |
| 		sampling_freq = 0x08;
 | |
| 		break;
 | |
| 	case 96000:
 | |
| 		sampling_freq = 0x0a;
 | |
| 		break;
 | |
| 	case 176400:
 | |
| 		sampling_freq = 0x0c;
 | |
| 		break;
 | |
| 	case 192000:
 | |
| 		sampling_freq = 0x0e;
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_err(rtd->card->dev,
 | |
| 			"unsupported samplerate %d\n", samplerate);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (samplerate % 16000)
 | |
| 		clk_44 = true; /* use 44.1 kHz root frequency */
 | |
| 	else
 | |
| 		clk_44 = false;
 | |
| 
 | |
| 	if (!(IS_ERR_OR_NULL(ctx->gpio_44) ||
 | |
| 	      IS_ERR_OR_NULL(ctx->gpio_48))) {
 | |
| 		/*
 | |
| 		 * ensure both GPIOs are LOW first, then drive the
 | |
| 		 * relevant one to HIGH
 | |
| 		 */
 | |
| 		if (clk_44) {
 | |
| 			gpiod_set_value_cansleep(ctx->gpio_48, !clk_44);
 | |
| 			gpiod_set_value_cansleep(ctx->gpio_44, clk_44);
 | |
| 		} else {
 | |
| 			gpiod_set_value_cansleep(ctx->gpio_44, clk_44);
 | |
| 			gpiod_set_value_cansleep(ctx->gpio_48, !clk_44);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	snd_soc_dai_set_clkdiv(codec_dai, WM8804_MCLK_DIV, mclk_div);
 | |
| 	ret = snd_soc_dai_set_pll(codec_dai, 0, 0, sysclk, mclk_freq);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(rtd->card->dev, "Failed to set WM8804 PLL\n");
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = snd_soc_dai_set_sysclk(codec_dai, WM8804_TX_CLKSRC_PLL,
 | |
| 				     sysclk, SND_SOC_CLOCK_OUT);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(rtd->card->dev,
 | |
| 			"Failed to set WM8804 SYSCLK: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	/* set sampling frequency status bits */
 | |
| 	snd_soc_component_update_bits(codec, WM8804_SPDTX4, 0x0f,
 | |
| 				      sampling_freq);
 | |
| 
 | |
| 	ctx->sample_rate = samplerate;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* machine stream operations */
 | |
| static struct snd_soc_ops sof_wm8804_ops = {
 | |
| 	.hw_params = sof_wm8804_hw_params,
 | |
| };
 | |
| 
 | |
| SND_SOC_DAILINK_DEF(ssp5_pin,
 | |
| 	DAILINK_COMP_ARRAY(COMP_CPU("SSP5 Pin")));
 | |
| 
 | |
| SND_SOC_DAILINK_DEF(ssp5_codec,
 | |
| 	DAILINK_COMP_ARRAY(COMP_CODEC("i2c-1AEC8804:00", "wm8804-spdif")));
 | |
| 
 | |
| SND_SOC_DAILINK_DEF(platform,
 | |
| 	DAILINK_COMP_ARRAY(COMP_PLATFORM("0000:00:0e.0")));
 | |
| 
 | |
| static struct snd_soc_dai_link dailink[] = {
 | |
| 	/* back ends */
 | |
| 	{
 | |
| 		.name = "SSP5-Codec",
 | |
| 		.id = 0,
 | |
| 		.no_pcm = 1,
 | |
| 		.dpcm_playback = 1,
 | |
| 		.dpcm_capture = 1,
 | |
| 		.ops = &sof_wm8804_ops,
 | |
| 		SND_SOC_DAILINK_REG(ssp5_pin, ssp5_codec, platform),
 | |
| 	},
 | |
| };
 | |
| 
 | |
| /* SoC card */
 | |
| static struct snd_soc_card sof_wm8804_card = {
 | |
| 	.name = "wm8804", /* sof- prefix added automatically */
 | |
| 	.owner = THIS_MODULE,
 | |
| 	.dai_link = dailink,
 | |
| 	.num_links = ARRAY_SIZE(dailink),
 | |
| };
 | |
| 
 | |
|  /* i2c-<HID>:00 with HID being 8 chars */
 | |
| static char codec_name[SND_ACPI_I2C_ID_LEN];
 | |
| 
 | |
| /*
 | |
|  * to control the HifiBerry Digi+ PRO, it's required to toggle GPIO to
 | |
|  * select the clock source. On the Up2 board, this means
 | |
|  * Pin29/BCM5/Linux GPIO 430 and Pin 31/BCM6/ Linux GPIO 404.
 | |
|  *
 | |
|  * Using the ACPI device name is not very nice, but since we only use
 | |
|  * the value for the Up2 board there is no risk of conflict with other
 | |
|  * platforms.
 | |
|  */
 | |
| 
 | |
| static struct gpiod_lookup_table up2_gpios_table = {
 | |
| 	/* .dev_id is set during probe */
 | |
| 	.table = {
 | |
| 		GPIO_LOOKUP("INT3452:01", 73, "BCM-GPIO5", GPIO_ACTIVE_HIGH),
 | |
| 		GPIO_LOOKUP("INT3452:01", 74, "BCM-GPIO6", GPIO_ACTIVE_HIGH),
 | |
| 		{ },
 | |
| 	},
 | |
| };
 | |
| 
 | |
| static int sof_wm8804_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	struct snd_soc_card *card;
 | |
| 	struct snd_soc_acpi_mach *mach;
 | |
| 	struct sof_card_private *ctx;
 | |
| 	struct acpi_device *adev;
 | |
| 	int dai_index = 0;
 | |
| 	int ret;
 | |
| 	int i;
 | |
| 
 | |
| 	ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
 | |
| 	if (!ctx)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	mach = pdev->dev.platform_data;
 | |
| 	card = &sof_wm8804_card;
 | |
| 	card->dev = &pdev->dev;
 | |
| 
 | |
| 	dmi_check_system(sof_wm8804_quirk_table);
 | |
| 
 | |
| 	if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK) {
 | |
| 		up2_gpios_table.dev_id = dev_name(&pdev->dev);
 | |
| 		gpiod_add_lookup_table(&up2_gpios_table);
 | |
| 
 | |
| 		/*
 | |
| 		 * The gpios are required for specific boards with
 | |
| 		 * local oscillators, and optional in other cases.
 | |
| 		 * Since we can't identify when they are needed, use
 | |
| 		 * the GPIO as non-optional
 | |
| 		 */
 | |
| 
 | |
| 		ctx->gpio_44 = devm_gpiod_get(&pdev->dev, "BCM-GPIO5",
 | |
| 					      GPIOD_OUT_LOW);
 | |
| 		if (IS_ERR(ctx->gpio_44)) {
 | |
| 			ret = PTR_ERR(ctx->gpio_44);
 | |
| 			dev_err(&pdev->dev,
 | |
| 				"could not get BCM-GPIO5: %d\n",
 | |
| 				ret);
 | |
| 			return ret;
 | |
| 		}
 | |
| 
 | |
| 		ctx->gpio_48 = devm_gpiod_get(&pdev->dev, "BCM-GPIO6",
 | |
| 					      GPIOD_OUT_LOW);
 | |
| 		if (IS_ERR(ctx->gpio_48)) {
 | |
| 			ret = PTR_ERR(ctx->gpio_48);
 | |
| 			dev_err(&pdev->dev,
 | |
| 				"could not get BCM-GPIO6: %d\n",
 | |
| 				ret);
 | |
| 			return ret;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* fix index of codec dai */
 | |
| 	for (i = 0; i < ARRAY_SIZE(dailink); i++) {
 | |
| 		if (!strcmp(dailink[i].codecs->name, "i2c-1AEC8804:00")) {
 | |
| 			dai_index = i;
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* fixup codec name based on HID */
 | |
| 	adev = acpi_dev_get_first_match_dev(mach->id, NULL, -1);
 | |
| 	if (adev) {
 | |
| 		snprintf(codec_name, sizeof(codec_name),
 | |
| 			 "%s%s", "i2c-", acpi_dev_name(adev));
 | |
| 		dailink[dai_index].codecs->name = codec_name;
 | |
| 	}
 | |
| 	acpi_dev_put(adev);
 | |
| 
 | |
| 	snd_soc_card_set_drvdata(card, ctx);
 | |
| 
 | |
| 	return devm_snd_soc_register_card(&pdev->dev, card);
 | |
| }
 | |
| 
 | |
| static int sof_wm8804_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	if (sof_wm8804_quirk & SOF_WM8804_UP2_QUIRK)
 | |
| 		gpiod_remove_lookup_table(&up2_gpios_table);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct platform_driver sof_wm8804_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "sof-wm8804",
 | |
| 		.pm = &snd_soc_pm_ops,
 | |
| 	},
 | |
| 	.probe = sof_wm8804_probe,
 | |
| 	.remove = sof_wm8804_remove,
 | |
| };
 | |
| module_platform_driver(sof_wm8804_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("ASoC Intel(R) SOF + WM8804 Machine driver");
 | |
| MODULE_AUTHOR("Pierre-Louis Bossart");
 | |
| MODULE_LICENSE("GPL v2");
 | |
| MODULE_ALIAS("platform:sof-wm8804");
 |