775 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			775 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * tas2552.c - ALSA SoC Texas Instruments TAS2552 Mono Audio Amplifier
 | |
|  *
 | |
|  * Copyright (C) 2014 Texas Instruments Incorporated -  https://www.ti.com
 | |
|  *
 | |
|  * Author: Dan Murphy <dmurphy@ti.com>
 | |
|  */
 | |
| 
 | |
| #include <linux/module.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/device.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/gpio.h>
 | |
| #include <linux/of_gpio.h>
 | |
| #include <linux/pm_runtime.h>
 | |
| #include <linux/regmap.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/regulator/consumer.h>
 | |
| 
 | |
| #include <sound/pcm.h>
 | |
| #include <sound/pcm_params.h>
 | |
| #include <sound/soc.h>
 | |
| #include <sound/soc-dapm.h>
 | |
| #include <sound/tlv.h>
 | |
| #include <sound/tas2552-plat.h>
 | |
| #include <dt-bindings/sound/tas2552.h>
 | |
| 
 | |
| #include "tas2552.h"
 | |
| 
 | |
| static const struct reg_default tas2552_reg_defs[] = {
 | |
| 	{TAS2552_CFG_1, 0x22},
 | |
| 	{TAS2552_CFG_3, 0x80},
 | |
| 	{TAS2552_DOUT, 0x00},
 | |
| 	{TAS2552_OUTPUT_DATA, 0xc0},
 | |
| 	{TAS2552_PDM_CFG, 0x01},
 | |
| 	{TAS2552_PGA_GAIN, 0x00},
 | |
| 	{TAS2552_BOOST_APT_CTRL, 0x0f},
 | |
| 	{TAS2552_RESERVED_0D, 0xbe},
 | |
| 	{TAS2552_LIMIT_RATE_HYS, 0x08},
 | |
| 	{TAS2552_CFG_2, 0xef},
 | |
| 	{TAS2552_SER_CTRL_1, 0x00},
 | |
| 	{TAS2552_SER_CTRL_2, 0x00},
 | |
| 	{TAS2552_PLL_CTRL_1, 0x10},
 | |
| 	{TAS2552_PLL_CTRL_2, 0x00},
 | |
| 	{TAS2552_PLL_CTRL_3, 0x00},
 | |
| 	{TAS2552_BTIP, 0x8f},
 | |
| 	{TAS2552_BTS_CTRL, 0x80},
 | |
| 	{TAS2552_LIMIT_RELEASE, 0x04},
 | |
| 	{TAS2552_LIMIT_INT_COUNT, 0x00},
 | |
| 	{TAS2552_EDGE_RATE_CTRL, 0x40},
 | |
| 	{TAS2552_VBAT_DATA, 0x00},
 | |
| };
 | |
| 
 | |
| #define TAS2552_NUM_SUPPLIES	3
 | |
| static const char *tas2552_supply_names[TAS2552_NUM_SUPPLIES] = {
 | |
| 	"vbat",		/* vbat voltage */
 | |
| 	"iovdd",	/* I/O Voltage */
 | |
| 	"avdd",		/* Analog DAC Voltage */
 | |
| };
 | |
| 
 | |
| struct tas2552_data {
 | |
| 	struct snd_soc_component *component;
 | |
| 	struct regmap *regmap;
 | |
| 	struct i2c_client *tas2552_client;
 | |
| 	struct regulator_bulk_data supplies[TAS2552_NUM_SUPPLIES];
 | |
| 	struct gpio_desc *enable_gpio;
 | |
| 	unsigned char regs[TAS2552_VBAT_DATA];
 | |
| 	unsigned int pll_clkin;
 | |
| 	int pll_clk_id;
 | |
| 	unsigned int pdm_clk;
 | |
| 	int pdm_clk_id;
 | |
| 
 | |
| 	unsigned int dai_fmt;
 | |
| 	unsigned int tdm_delay;
 | |
| };
 | |
| 
 | |
| static int tas2552_post_event(struct snd_soc_dapm_widget *w,
 | |
| 			      struct snd_kcontrol *kcontrol, int event)
 | |
| {
 | |
| 	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
 | |
| 
 | |
| 	switch (event) {
 | |
| 	case SND_SOC_DAPM_POST_PMU:
 | |
| 		snd_soc_component_write(component, TAS2552_RESERVED_0D, 0xc0);
 | |
| 		snd_soc_component_update_bits(component, TAS2552_LIMIT_RATE_HYS, (1 << 5),
 | |
| 				    (1 << 5));
 | |
| 		snd_soc_component_update_bits(component, TAS2552_CFG_2, 1, 0);
 | |
| 		snd_soc_component_update_bits(component, TAS2552_CFG_1, TAS2552_SWS, 0);
 | |
| 		break;
 | |
| 	case SND_SOC_DAPM_POST_PMD:
 | |
| 		snd_soc_component_update_bits(component, TAS2552_CFG_1, TAS2552_SWS,
 | |
| 				    TAS2552_SWS);
 | |
| 		snd_soc_component_update_bits(component, TAS2552_CFG_2, 1, 1);
 | |
| 		snd_soc_component_update_bits(component, TAS2552_LIMIT_RATE_HYS, (1 << 5), 0);
 | |
| 		snd_soc_component_write(component, TAS2552_RESERVED_0D, 0xbe);
 | |
| 		break;
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /* Input mux controls */
 | |
| static const char * const tas2552_input_texts[] = {
 | |
| 	"Digital", "Analog" };
 | |
| static SOC_ENUM_SINGLE_DECL(tas2552_input_mux_enum, TAS2552_CFG_3, 7,
 | |
| 			    tas2552_input_texts);
 | |
| 
 | |
| static const struct snd_kcontrol_new tas2552_input_mux_control =
 | |
| 	SOC_DAPM_ENUM("Route", tas2552_input_mux_enum);
 | |
| 
 | |
| static const struct snd_soc_dapm_widget tas2552_dapm_widgets[] =
 | |
| {
 | |
| 	SND_SOC_DAPM_INPUT("IN"),
 | |
| 
 | |
| 	/* MUX Controls */
 | |
| 	SND_SOC_DAPM_MUX("Input selection", SND_SOC_NOPM, 0, 0,
 | |
| 			 &tas2552_input_mux_control),
 | |
| 
 | |
| 	SND_SOC_DAPM_AIF_IN("DAC IN", "DAC Playback", 0, SND_SOC_NOPM, 0, 0),
 | |
| 	SND_SOC_DAPM_DAC("DAC", NULL, SND_SOC_NOPM, 0, 0),
 | |
| 	SND_SOC_DAPM_OUT_DRV("ClassD", TAS2552_CFG_2, 7, 0, NULL, 0),
 | |
| 	SND_SOC_DAPM_SUPPLY("PLL", TAS2552_CFG_2, 3, 0, NULL, 0),
 | |
| 	SND_SOC_DAPM_POST("Post Event", tas2552_post_event),
 | |
| 
 | |
| 	SND_SOC_DAPM_OUTPUT("OUT")
 | |
| };
 | |
| 
 | |
| static const struct snd_soc_dapm_route tas2552_audio_map[] = {
 | |
| 	{"DAC", NULL, "DAC IN"},
 | |
| 	{"Input selection", "Digital", "DAC"},
 | |
| 	{"Input selection", "Analog", "IN"},
 | |
| 	{"ClassD", NULL, "Input selection"},
 | |
| 	{"OUT", NULL, "ClassD"},
 | |
| 	{"ClassD", NULL, "PLL"},
 | |
| };
 | |
| 
 | |
| #ifdef CONFIG_PM
 | |
| static void tas2552_sw_shutdown(struct tas2552_data *tas2552, int sw_shutdown)
 | |
| {
 | |
| 	u8 cfg1_reg = 0;
 | |
| 
 | |
| 	if (!tas2552->component)
 | |
| 		return;
 | |
| 
 | |
| 	if (sw_shutdown)
 | |
| 		cfg1_reg = TAS2552_SWS;
 | |
| 
 | |
| 	snd_soc_component_update_bits(tas2552->component, TAS2552_CFG_1, TAS2552_SWS,
 | |
| 			    cfg1_reg);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static int tas2552_setup_pll(struct snd_soc_component *component,
 | |
| 			     struct snd_pcm_hw_params *params)
 | |
| {
 | |
| 	struct tas2552_data *tas2552 = dev_get_drvdata(component->dev);
 | |
| 	bool bypass_pll = false;
 | |
| 	unsigned int pll_clk = params_rate(params) * 512;
 | |
| 	unsigned int pll_clkin = tas2552->pll_clkin;
 | |
| 	u8 pll_enable;
 | |
| 
 | |
| 	if (!pll_clkin) {
 | |
| 		if (tas2552->pll_clk_id != TAS2552_PLL_CLKIN_BCLK)
 | |
| 			return -EINVAL;
 | |
| 
 | |
| 		pll_clkin = snd_soc_params_to_bclk(params);
 | |
| 		pll_clkin += tas2552->tdm_delay;
 | |
| 	}
 | |
| 
 | |
| 	pll_enable = snd_soc_component_read(component, TAS2552_CFG_2) & TAS2552_PLL_ENABLE;
 | |
| 	snd_soc_component_update_bits(component, TAS2552_CFG_2, TAS2552_PLL_ENABLE, 0);
 | |
| 
 | |
| 	if (pll_clkin == pll_clk)
 | |
| 		bypass_pll = true;
 | |
| 
 | |
| 	if (bypass_pll) {
 | |
| 		/* By pass the PLL configuration */
 | |
| 		snd_soc_component_update_bits(component, TAS2552_PLL_CTRL_2,
 | |
| 				    TAS2552_PLL_BYPASS, TAS2552_PLL_BYPASS);
 | |
| 	} else {
 | |
| 		/* Fill in the PLL control registers for J & D
 | |
| 		 * pll_clk = (.5 * pll_clkin * J.D) / 2^p
 | |
| 		 * Need to fill in J and D here based on incoming freq
 | |
| 		 */
 | |
| 		unsigned int d, q, t;
 | |
| 		u8 j;
 | |
| 		u8 pll_sel = (tas2552->pll_clk_id << 3) & TAS2552_PLL_SRC_MASK;
 | |
| 		u8 p = snd_soc_component_read(component, TAS2552_PLL_CTRL_1);
 | |
| 
 | |
| 		p = (p >> 7);
 | |
| 
 | |
| recalc:
 | |
| 		t = (pll_clk * 2) << p;
 | |
| 		j = t / pll_clkin;
 | |
| 		d = t % pll_clkin;
 | |
| 		t = pll_clkin / 10000;
 | |
| 		q = d / (t + 1);
 | |
| 		d = q + ((9999 - pll_clkin % 10000) * (d / t - q)) / 10000;
 | |
| 
 | |
| 		if (d && (pll_clkin < 512000 || pll_clkin > 9200000)) {
 | |
| 			if (tas2552->pll_clk_id == TAS2552_PLL_CLKIN_BCLK) {
 | |
| 				pll_clkin = 1800000;
 | |
| 				pll_sel = (TAS2552_PLL_CLKIN_1_8_FIXED << 3) &
 | |
| 							TAS2552_PLL_SRC_MASK;
 | |
| 			} else {
 | |
| 				pll_clkin = snd_soc_params_to_bclk(params);
 | |
| 				pll_clkin += tas2552->tdm_delay;
 | |
| 				pll_sel = (TAS2552_PLL_CLKIN_BCLK << 3) &
 | |
| 							TAS2552_PLL_SRC_MASK;
 | |
| 			}
 | |
| 			goto recalc;
 | |
| 		}
 | |
| 
 | |
| 		snd_soc_component_update_bits(component, TAS2552_CFG_1, TAS2552_PLL_SRC_MASK,
 | |
| 				    pll_sel);
 | |
| 
 | |
| 		snd_soc_component_update_bits(component, TAS2552_PLL_CTRL_1,
 | |
| 				    TAS2552_PLL_J_MASK, j);
 | |
| 		/* Will clear the PLL_BYPASS bit */
 | |
| 		snd_soc_component_write(component, TAS2552_PLL_CTRL_2,
 | |
| 			      TAS2552_PLL_D_UPPER(d));
 | |
| 		snd_soc_component_write(component, TAS2552_PLL_CTRL_3,
 | |
| 			      TAS2552_PLL_D_LOWER(d));
 | |
| 	}
 | |
| 
 | |
| 	/* Restore PLL status */
 | |
| 	snd_soc_component_update_bits(component, TAS2552_CFG_2, TAS2552_PLL_ENABLE,
 | |
| 			    pll_enable);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tas2552_hw_params(struct snd_pcm_substream *substream,
 | |
| 			     struct snd_pcm_hw_params *params,
 | |
| 			     struct snd_soc_dai *dai)
 | |
| {
 | |
| 	struct snd_soc_component *component = dai->component;
 | |
| 	struct tas2552_data *tas2552 = dev_get_drvdata(component->dev);
 | |
| 	int cpf;
 | |
| 	u8 ser_ctrl1_reg, wclk_rate;
 | |
| 
 | |
| 	switch (params_width(params)) {
 | |
| 	case 16:
 | |
| 		ser_ctrl1_reg = TAS2552_WORDLENGTH_16BIT;
 | |
| 		cpf = 32 + tas2552->tdm_delay;
 | |
| 		break;
 | |
| 	case 20:
 | |
| 		ser_ctrl1_reg = TAS2552_WORDLENGTH_20BIT;
 | |
| 		cpf = 64 + tas2552->tdm_delay;
 | |
| 		break;
 | |
| 	case 24:
 | |
| 		ser_ctrl1_reg = TAS2552_WORDLENGTH_24BIT;
 | |
| 		cpf = 64 + tas2552->tdm_delay;
 | |
| 		break;
 | |
| 	case 32:
 | |
| 		ser_ctrl1_reg = TAS2552_WORDLENGTH_32BIT;
 | |
| 		cpf = 64 + tas2552->tdm_delay;
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_err(component->dev, "Not supported sample size: %d\n",
 | |
| 			params_width(params));
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	if (cpf <= 32)
 | |
| 		ser_ctrl1_reg |= TAS2552_CLKSPERFRAME_32;
 | |
| 	else if (cpf <= 64)
 | |
| 		ser_ctrl1_reg |= TAS2552_CLKSPERFRAME_64;
 | |
| 	else if (cpf <= 128)
 | |
| 		ser_ctrl1_reg |= TAS2552_CLKSPERFRAME_128;
 | |
| 	else
 | |
| 		ser_ctrl1_reg |= TAS2552_CLKSPERFRAME_256;
 | |
| 
 | |
| 	snd_soc_component_update_bits(component, TAS2552_SER_CTRL_1,
 | |
| 			    TAS2552_WORDLENGTH_MASK | TAS2552_CLKSPERFRAME_MASK,
 | |
| 			    ser_ctrl1_reg);
 | |
| 
 | |
| 	switch (params_rate(params)) {
 | |
| 	case 8000:
 | |
| 		wclk_rate = TAS2552_WCLK_FREQ_8KHZ;
 | |
| 		break;
 | |
| 	case 11025:
 | |
| 	case 12000:
 | |
| 		wclk_rate = TAS2552_WCLK_FREQ_11_12KHZ;
 | |
| 		break;
 | |
| 	case 16000:
 | |
| 		wclk_rate = TAS2552_WCLK_FREQ_16KHZ;
 | |
| 		break;
 | |
| 	case 22050:
 | |
| 	case 24000:
 | |
| 		wclk_rate = TAS2552_WCLK_FREQ_22_24KHZ;
 | |
| 		break;
 | |
| 	case 32000:
 | |
| 		wclk_rate = TAS2552_WCLK_FREQ_32KHZ;
 | |
| 		break;
 | |
| 	case 44100:
 | |
| 	case 48000:
 | |
| 		wclk_rate = TAS2552_WCLK_FREQ_44_48KHZ;
 | |
| 		break;
 | |
| 	case 88200:
 | |
| 	case 96000:
 | |
| 		wclk_rate = TAS2552_WCLK_FREQ_88_96KHZ;
 | |
| 		break;
 | |
| 	case 176400:
 | |
| 	case 192000:
 | |
| 		wclk_rate = TAS2552_WCLK_FREQ_176_192KHZ;
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_err(component->dev, "Not supported sample rate: %d\n",
 | |
| 			params_rate(params));
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	snd_soc_component_update_bits(component, TAS2552_CFG_3, TAS2552_WCLK_FREQ_MASK,
 | |
| 			    wclk_rate);
 | |
| 
 | |
| 	return tas2552_setup_pll(component, params);
 | |
| }
 | |
| 
 | |
| #define TAS2552_DAI_FMT_MASK	(TAS2552_BCLKDIR | \
 | |
| 				 TAS2552_WCLKDIR | \
 | |
| 				 TAS2552_DATAFORMAT_MASK)
 | |
| static int tas2552_prepare(struct snd_pcm_substream *substream,
 | |
| 			   struct snd_soc_dai *dai)
 | |
| {
 | |
| 	struct snd_soc_component *component = dai->component;
 | |
| 	struct tas2552_data *tas2552 = snd_soc_component_get_drvdata(component);
 | |
| 	int delay = 0;
 | |
| 
 | |
| 	/* TDM slot selection only valid in DSP_A/_B mode */
 | |
| 	if (tas2552->dai_fmt == SND_SOC_DAIFMT_DSP_A)
 | |
| 		delay += (tas2552->tdm_delay + 1);
 | |
| 	else if (tas2552->dai_fmt == SND_SOC_DAIFMT_DSP_B)
 | |
| 		delay += tas2552->tdm_delay;
 | |
| 
 | |
| 	/* Configure data delay */
 | |
| 	snd_soc_component_write(component, TAS2552_SER_CTRL_2, delay);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tas2552_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 | |
| {
 | |
| 	struct snd_soc_component *component = dai->component;
 | |
| 	struct tas2552_data *tas2552 = dev_get_drvdata(component->dev);
 | |
| 	u8 serial_format;
 | |
| 
 | |
| 	switch (fmt & SND_SOC_DAIFMT_CLOCK_PROVIDER_MASK) {
 | |
| 	case SND_SOC_DAIFMT_CBC_CFC:
 | |
| 		serial_format = 0x00;
 | |
| 		break;
 | |
| 	case SND_SOC_DAIFMT_CBC_CFP:
 | |
| 		serial_format = TAS2552_WCLKDIR;
 | |
| 		break;
 | |
| 	case SND_SOC_DAIFMT_CBP_CFC:
 | |
| 		serial_format = TAS2552_BCLKDIR;
 | |
| 		break;
 | |
| 	case SND_SOC_DAIFMT_CBP_CFP:
 | |
| 		serial_format = (TAS2552_BCLKDIR | TAS2552_WCLKDIR);
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_vdbg(component->dev, "DAI Format master is not found\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	switch (fmt & (SND_SOC_DAIFMT_FORMAT_MASK |
 | |
| 		       SND_SOC_DAIFMT_INV_MASK)) {
 | |
| 	case (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF):
 | |
| 		break;
 | |
| 	case (SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_IB_NF):
 | |
| 	case (SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF):
 | |
| 		serial_format |= TAS2552_DATAFORMAT_DSP;
 | |
| 		break;
 | |
| 	case (SND_SOC_DAIFMT_RIGHT_J | SND_SOC_DAIFMT_NB_NF):
 | |
| 		serial_format |= TAS2552_DATAFORMAT_RIGHT_J;
 | |
| 		break;
 | |
| 	case (SND_SOC_DAIFMT_LEFT_J | SND_SOC_DAIFMT_NB_NF):
 | |
| 		serial_format |= TAS2552_DATAFORMAT_LEFT_J;
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_vdbg(component->dev, "DAI Format is not found\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 	tas2552->dai_fmt = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
 | |
| 
 | |
| 	snd_soc_component_update_bits(component, TAS2552_SER_CTRL_1, TAS2552_DAI_FMT_MASK,
 | |
| 			    serial_format);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tas2552_set_dai_sysclk(struct snd_soc_dai *dai, int clk_id,
 | |
| 				  unsigned int freq, int dir)
 | |
| {
 | |
| 	struct snd_soc_component *component = dai->component;
 | |
| 	struct tas2552_data *tas2552 = dev_get_drvdata(component->dev);
 | |
| 	u8 reg, mask, val;
 | |
| 
 | |
| 	switch (clk_id) {
 | |
| 	case TAS2552_PLL_CLKIN_MCLK:
 | |
| 	case TAS2552_PLL_CLKIN_IVCLKIN:
 | |
| 		if (freq < 512000 || freq > 24576000) {
 | |
| 			/* out of range PLL_CLKIN, fall back to use BCLK */
 | |
| 			dev_warn(component->dev, "Out of range PLL_CLKIN: %u\n",
 | |
| 				 freq);
 | |
| 			clk_id = TAS2552_PLL_CLKIN_BCLK;
 | |
| 			freq = 0;
 | |
| 		}
 | |
| 		fallthrough;
 | |
| 	case TAS2552_PLL_CLKIN_BCLK:
 | |
| 	case TAS2552_PLL_CLKIN_1_8_FIXED:
 | |
| 		mask = TAS2552_PLL_SRC_MASK;
 | |
| 		val = (clk_id << 3) & mask; /* bit 4:5 in the register */
 | |
| 		reg = TAS2552_CFG_1;
 | |
| 		tas2552->pll_clk_id = clk_id;
 | |
| 		tas2552->pll_clkin = freq;
 | |
| 		break;
 | |
| 	case TAS2552_PDM_CLK_PLL:
 | |
| 	case TAS2552_PDM_CLK_IVCLKIN:
 | |
| 	case TAS2552_PDM_CLK_BCLK:
 | |
| 	case TAS2552_PDM_CLK_MCLK:
 | |
| 		mask = TAS2552_PDM_CLK_SEL_MASK;
 | |
| 		val = (clk_id >> 1) & mask; /* bit 0:1 in the register */
 | |
| 		reg = TAS2552_PDM_CFG;
 | |
| 		tas2552->pdm_clk_id = clk_id;
 | |
| 		tas2552->pdm_clk = freq;
 | |
| 		break;
 | |
| 	default:
 | |
| 		dev_err(component->dev, "Invalid clk id: %d\n", clk_id);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	snd_soc_component_update_bits(component, reg, mask, val);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tas2552_set_dai_tdm_slot(struct snd_soc_dai *dai,
 | |
| 				    unsigned int tx_mask, unsigned int rx_mask,
 | |
| 				    int slots, int slot_width)
 | |
| {
 | |
| 	struct snd_soc_component *component = dai->component;
 | |
| 	struct tas2552_data *tas2552 = snd_soc_component_get_drvdata(component);
 | |
| 	unsigned int lsb;
 | |
| 
 | |
| 	if (unlikely(!tx_mask)) {
 | |
| 		dev_err(component->dev, "tx masks need to be non 0\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	/* TDM based on DSP mode requires slots to be adjacent */
 | |
| 	lsb = __ffs(tx_mask);
 | |
| 	if ((lsb + 1) != __fls(tx_mask)) {
 | |
| 		dev_err(component->dev, "Invalid mask, slots must be adjacent\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	tas2552->tdm_delay = lsb * slot_width;
 | |
| 
 | |
| 	/* DOUT in high-impedance on inactive bit clocks */
 | |
| 	snd_soc_component_update_bits(component, TAS2552_DOUT,
 | |
| 			    TAS2552_SDOUT_TRISTATE, TAS2552_SDOUT_TRISTATE);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tas2552_mute(struct snd_soc_dai *dai, int mute, int direction)
 | |
| {
 | |
| 	u8 cfg1_reg = 0;
 | |
| 	struct snd_soc_component *component = dai->component;
 | |
| 
 | |
| 	if (mute)
 | |
| 		cfg1_reg |= TAS2552_MUTE;
 | |
| 
 | |
| 	snd_soc_component_update_bits(component, TAS2552_CFG_1, TAS2552_MUTE, cfg1_reg);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_PM
 | |
| static int tas2552_runtime_suspend(struct device *dev)
 | |
| {
 | |
| 	struct tas2552_data *tas2552 = dev_get_drvdata(dev);
 | |
| 
 | |
| 	tas2552_sw_shutdown(tas2552, 1);
 | |
| 
 | |
| 	regcache_cache_only(tas2552->regmap, true);
 | |
| 	regcache_mark_dirty(tas2552->regmap);
 | |
| 
 | |
| 	gpiod_set_value(tas2552->enable_gpio, 0);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tas2552_runtime_resume(struct device *dev)
 | |
| {
 | |
| 	struct tas2552_data *tas2552 = dev_get_drvdata(dev);
 | |
| 
 | |
| 	gpiod_set_value(tas2552->enable_gpio, 1);
 | |
| 
 | |
| 	tas2552_sw_shutdown(tas2552, 0);
 | |
| 
 | |
| 	regcache_cache_only(tas2552->regmap, false);
 | |
| 	regcache_sync(tas2552->regmap);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static const struct dev_pm_ops tas2552_pm = {
 | |
| 	SET_RUNTIME_PM_OPS(tas2552_runtime_suspend, tas2552_runtime_resume,
 | |
| 			   NULL)
 | |
| };
 | |
| 
 | |
| static const struct snd_soc_dai_ops tas2552_speaker_dai_ops = {
 | |
| 	.hw_params	= tas2552_hw_params,
 | |
| 	.prepare	= tas2552_prepare,
 | |
| 	.set_sysclk	= tas2552_set_dai_sysclk,
 | |
| 	.set_fmt	= tas2552_set_dai_fmt,
 | |
| 	.set_tdm_slot	= tas2552_set_dai_tdm_slot,
 | |
| 	.mute_stream	= tas2552_mute,
 | |
| 	.no_capture_mute = 1,
 | |
| };
 | |
| 
 | |
| /* Formats supported by TAS2552 driver. */
 | |
| #define TAS2552_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
 | |
| 			 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
 | |
| 
 | |
| /* TAS2552 dai structure. */
 | |
| static struct snd_soc_dai_driver tas2552_dai[] = {
 | |
| 	{
 | |
| 		.name = "tas2552-amplifier",
 | |
| 		.playback = {
 | |
| 			.stream_name = "Playback",
 | |
| 			.channels_min = 2,
 | |
| 			.channels_max = 2,
 | |
| 			.rates = SNDRV_PCM_RATE_8000_192000,
 | |
| 			.formats = TAS2552_FORMATS,
 | |
| 		},
 | |
| 		.ops = &tas2552_speaker_dai_ops,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * DAC digital volumes. From -7 to 24 dB in 1 dB steps
 | |
|  */
 | |
| static DECLARE_TLV_DB_SCALE(dac_tlv, -700, 100, 0);
 | |
| 
 | |
| static const char * const tas2552_din_source_select[] = {
 | |
| 	"Muted",
 | |
| 	"Left",
 | |
| 	"Right",
 | |
| 	"Left + Right average",
 | |
| };
 | |
| static SOC_ENUM_SINGLE_DECL(tas2552_din_source_enum,
 | |
| 			    TAS2552_CFG_3, 3,
 | |
| 			    tas2552_din_source_select);
 | |
| 
 | |
| static const struct snd_kcontrol_new tas2552_snd_controls[] = {
 | |
| 	SOC_SINGLE_TLV("Speaker Driver Playback Volume",
 | |
| 			 TAS2552_PGA_GAIN, 0, 0x1f, 0, dac_tlv),
 | |
| 	SOC_ENUM("DIN source", tas2552_din_source_enum),
 | |
| };
 | |
| 
 | |
| static int tas2552_component_probe(struct snd_soc_component *component)
 | |
| {
 | |
| 	struct tas2552_data *tas2552 = snd_soc_component_get_drvdata(component);
 | |
| 	int ret;
 | |
| 
 | |
| 	tas2552->component = component;
 | |
| 
 | |
| 	ret = regulator_bulk_enable(ARRAY_SIZE(tas2552->supplies),
 | |
| 				    tas2552->supplies);
 | |
| 
 | |
| 	if (ret != 0) {
 | |
| 		dev_err(component->dev, "Failed to enable supplies: %d\n",
 | |
| 			ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	gpiod_set_value(tas2552->enable_gpio, 1);
 | |
| 
 | |
| 	ret = pm_runtime_resume_and_get(component->dev);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(component->dev, "Enabling device failed: %d\n",
 | |
| 			ret);
 | |
| 		goto probe_fail;
 | |
| 	}
 | |
| 
 | |
| 	snd_soc_component_update_bits(component, TAS2552_CFG_1, TAS2552_MUTE, TAS2552_MUTE);
 | |
| 	snd_soc_component_write(component, TAS2552_CFG_3, TAS2552_I2S_OUT_SEL |
 | |
| 					    TAS2552_DIN_SRC_SEL_AVG_L_R);
 | |
| 	snd_soc_component_write(component, TAS2552_OUTPUT_DATA,
 | |
| 		      TAS2552_PDM_DATA_SEL_V_I |
 | |
| 		      TAS2552_R_DATA_OUT(TAS2552_DATA_OUT_V_DATA));
 | |
| 	snd_soc_component_write(component, TAS2552_BOOST_APT_CTRL, TAS2552_APT_DELAY_200 |
 | |
| 						     TAS2552_APT_THRESH_20_17);
 | |
| 
 | |
| 	snd_soc_component_write(component, TAS2552_CFG_2, TAS2552_BOOST_EN | TAS2552_APT_EN |
 | |
| 					    TAS2552_LIM_EN);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| probe_fail:
 | |
| 	pm_runtime_put_noidle(component->dev);
 | |
| 	gpiod_set_value(tas2552->enable_gpio, 0);
 | |
| 
 | |
| 	regulator_bulk_disable(ARRAY_SIZE(tas2552->supplies),
 | |
| 					tas2552->supplies);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void tas2552_component_remove(struct snd_soc_component *component)
 | |
| {
 | |
| 	struct tas2552_data *tas2552 = snd_soc_component_get_drvdata(component);
 | |
| 
 | |
| 	pm_runtime_put(component->dev);
 | |
| 
 | |
| 	gpiod_set_value(tas2552->enable_gpio, 0);
 | |
| };
 | |
| 
 | |
| #ifdef CONFIG_PM
 | |
| static int tas2552_suspend(struct snd_soc_component *component)
 | |
| {
 | |
| 	struct tas2552_data *tas2552 = snd_soc_component_get_drvdata(component);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regulator_bulk_disable(ARRAY_SIZE(tas2552->supplies),
 | |
| 					tas2552->supplies);
 | |
| 
 | |
| 	if (ret != 0)
 | |
| 		dev_err(component->dev, "Failed to disable supplies: %d\n",
 | |
| 			ret);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int tas2552_resume(struct snd_soc_component *component)
 | |
| {
 | |
| 	struct tas2552_data *tas2552 = snd_soc_component_get_drvdata(component);
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = regulator_bulk_enable(ARRAY_SIZE(tas2552->supplies),
 | |
| 				    tas2552->supplies);
 | |
| 
 | |
| 	if (ret != 0) {
 | |
| 		dev_err(component->dev, "Failed to enable supplies: %d\n",
 | |
| 			ret);
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| #else
 | |
| #define tas2552_suspend NULL
 | |
| #define tas2552_resume NULL
 | |
| #endif
 | |
| 
 | |
| static const struct snd_soc_component_driver soc_component_dev_tas2552 = {
 | |
| 	.probe			= tas2552_component_probe,
 | |
| 	.remove			= tas2552_component_remove,
 | |
| 	.suspend		= tas2552_suspend,
 | |
| 	.resume			= tas2552_resume,
 | |
| 	.controls		= tas2552_snd_controls,
 | |
| 	.num_controls		= ARRAY_SIZE(tas2552_snd_controls),
 | |
| 	.dapm_widgets		= tas2552_dapm_widgets,
 | |
| 	.num_dapm_widgets	= ARRAY_SIZE(tas2552_dapm_widgets),
 | |
| 	.dapm_routes		= tas2552_audio_map,
 | |
| 	.num_dapm_routes	= ARRAY_SIZE(tas2552_audio_map),
 | |
| 	.idle_bias_on		= 1,
 | |
| 	.endianness		= 1,
 | |
| };
 | |
| 
 | |
| static const struct regmap_config tas2552_regmap_config = {
 | |
| 	.reg_bits = 8,
 | |
| 	.val_bits = 8,
 | |
| 
 | |
| 	.max_register = TAS2552_MAX_REG,
 | |
| 	.reg_defaults = tas2552_reg_defs,
 | |
| 	.num_reg_defaults = ARRAY_SIZE(tas2552_reg_defs),
 | |
| 	.cache_type = REGCACHE_RBTREE,
 | |
| };
 | |
| 
 | |
| static int tas2552_probe(struct i2c_client *client)
 | |
| {
 | |
| 	struct device *dev;
 | |
| 	struct tas2552_data *data;
 | |
| 	int ret;
 | |
| 	int i;
 | |
| 
 | |
| 	dev = &client->dev;
 | |
| 	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
 | |
| 	if (data == NULL)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	data->enable_gpio = devm_gpiod_get_optional(dev, "enable",
 | |
| 						    GPIOD_OUT_LOW);
 | |
| 	if (IS_ERR(data->enable_gpio))
 | |
| 		return PTR_ERR(data->enable_gpio);
 | |
| 
 | |
| 	data->tas2552_client = client;
 | |
| 	data->regmap = devm_regmap_init_i2c(client, &tas2552_regmap_config);
 | |
| 	if (IS_ERR(data->regmap)) {
 | |
| 		ret = PTR_ERR(data->regmap);
 | |
| 		dev_err(&client->dev, "Failed to allocate register map: %d\n",
 | |
| 			ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	for (i = 0; i < ARRAY_SIZE(data->supplies); i++)
 | |
| 		data->supplies[i].supply = tas2552_supply_names[i];
 | |
| 
 | |
| 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
 | |
| 				      data->supplies);
 | |
| 	if (ret != 0) {
 | |
| 		dev_err(dev, "Failed to request supplies: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	pm_runtime_set_active(&client->dev);
 | |
| 	pm_runtime_set_autosuspend_delay(&client->dev, 1000);
 | |
| 	pm_runtime_use_autosuspend(&client->dev);
 | |
| 	pm_runtime_enable(&client->dev);
 | |
| 	pm_runtime_mark_last_busy(&client->dev);
 | |
| 	pm_runtime_put_sync_autosuspend(&client->dev);
 | |
| 
 | |
| 	dev_set_drvdata(&client->dev, data);
 | |
| 
 | |
| 	ret = devm_snd_soc_register_component(&client->dev,
 | |
| 				      &soc_component_dev_tas2552,
 | |
| 				      tas2552_dai, ARRAY_SIZE(tas2552_dai));
 | |
| 	if (ret < 0) {
 | |
| 		dev_err(&client->dev, "Failed to register component: %d\n", ret);
 | |
| 		pm_runtime_get_noresume(&client->dev);
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int tas2552_i2c_remove(struct i2c_client *client)
 | |
| {
 | |
| 	pm_runtime_disable(&client->dev);
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id tas2552_id[] = {
 | |
| 	{ "tas2552", 0 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, tas2552_id);
 | |
| 
 | |
| #if IS_ENABLED(CONFIG_OF)
 | |
| static const struct of_device_id tas2552_of_match[] = {
 | |
| 	{ .compatible = "ti,tas2552", },
 | |
| 	{},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, tas2552_of_match);
 | |
| #endif
 | |
| 
 | |
| static struct i2c_driver tas2552_i2c_driver = {
 | |
| 	.driver = {
 | |
| 		.name = "tas2552",
 | |
| 		.of_match_table = of_match_ptr(tas2552_of_match),
 | |
| 		.pm = &tas2552_pm,
 | |
| 	},
 | |
| 	.probe_new = tas2552_probe,
 | |
| 	.remove = tas2552_i2c_remove,
 | |
| 	.id_table = tas2552_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(tas2552_i2c_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Dan Muprhy <dmurphy@ti.com>");
 | |
| MODULE_DESCRIPTION("TAS2552 Audio amplifier driver");
 | |
| MODULE_LICENSE("GPL");
 |