727 lines
		
	
	
		
			15 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			727 lines
		
	
	
		
			15 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
| // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 | |
| /*
 | |
|  * Copyright (c) 2022 Neil Armstrong <neil.armstrong@linaro.org>
 | |
|  */
 | |
| 
 | |
| /dts-v1/;
 | |
| 
 | |
| #include "meson-g12b-s922x.dtsi"
 | |
| #include <dt-bindings/input/input.h>
 | |
| #include <dt-bindings/leds/common.h>
 | |
| #include <dt-bindings/gpio/meson-g12a-gpio.h>
 | |
| #include <dt-bindings/sound/meson-g12a-toacodec.h>
 | |
| #include <dt-bindings/sound/meson-g12a-tohdmitx.h>
 | |
| 
 | |
| / {
 | |
| 	compatible = "hardkernel,odroid-go-ultra", "amlogic,s922x", "amlogic,g12b";
 | |
| 	model = "Hardkernel ODROID-GO-Ultra";
 | |
| 
 | |
| 	aliases {
 | |
| 		serial0 = &uart_AO;
 | |
| 		rtc0 = &vrtc;
 | |
| 	};
 | |
| 
 | |
| 	adc-joystick-left {
 | |
| 		compatible = "adc-joystick";
 | |
| 		io-channels = <&saradc 2>, <&saradc 3>;
 | |
| 		poll-interval = <10>;
 | |
| 		#address-cells = <1>;
 | |
| 		#size-cells = <0>;
 | |
| 
 | |
| 		axis@0 {
 | |
| 			reg = <0>;
 | |
| 			linux,code = <ABS_Y>;
 | |
| 			abs-range = <3150 950>;
 | |
| 			abs-fuzz = <32>;
 | |
| 			abs-flat = <64>;
 | |
| 		};
 | |
| 		axis@1 {
 | |
| 			reg = <1>;
 | |
| 			linux,code = <ABS_X>;
 | |
| 			abs-range = <700 2900>;
 | |
| 			abs-fuzz = <32>;
 | |
| 			abs-flat = <64>;
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	adc-joystick-right {
 | |
| 		compatible = "adc-joystick";
 | |
| 		io-channels = <&saradc 0>, <&saradc 1>;
 | |
| 		poll-interval = <10>;
 | |
| 		#address-cells = <1>;
 | |
| 		#size-cells = <0>;
 | |
| 
 | |
| 		axis@0 {
 | |
| 			reg = <0>;
 | |
| 			linux,code = <ABS_RY>;
 | |
| 			abs-range = <3150 950>;
 | |
| 			abs-fuzz = <32>;
 | |
| 			abs-flat = <64>;
 | |
| 		};
 | |
| 		axis@1 {
 | |
| 			reg = <1>;
 | |
| 			linux,code = <ABS_RX>;
 | |
| 			abs-range = <800 3000>;
 | |
| 			abs-fuzz = <32>;
 | |
| 			abs-flat = <64>;
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	chosen {
 | |
| 		stdout-path = "serial0:115200n8";
 | |
| 	};
 | |
| 
 | |
| 	codec_clk: codec-clk {
 | |
| 		compatible = "fixed-clock";
 | |
| 		clock-frequency = <12288000>;
 | |
| 		clock-output-names = "codec_clk";
 | |
| 		#clock-cells = <0>;
 | |
| 	};
 | |
| 
 | |
| 	gpio-keys {
 | |
| 		compatible = "gpio-keys-polled";
 | |
| 		poll-interval = <10>;
 | |
| 		pinctrl-0 = <&keypad_gpio_pins>;
 | |
| 		pinctrl-names = "default";
 | |
| 
 | |
| 		volume-up-button {
 | |
| 			label = "VOLUME-UP";
 | |
| 			linux,code = <KEY_VOLUMEUP>;
 | |
| 			gpios = <&gpio GPIOX_8 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		volume-down-button {
 | |
| 			label = "VOLUME-DOWN";
 | |
| 			linux,code = <KEY_VOLUMEDOWN>;
 | |
| 			gpios = <&gpio GPIOX_9 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		dpad-up-button {
 | |
| 			label = "DPAD-UP";
 | |
| 			linux,code = <BTN_DPAD_UP>;
 | |
| 			gpios = <&gpio GPIOX_0 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		dpad-down-button {
 | |
| 			label = "DPAD-DOWN";
 | |
| 			linux,code = <BTN_DPAD_DOWN>;
 | |
| 			gpios = <&gpio GPIOX_1 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		dpad-left-button {
 | |
| 			label = "DPAD-LEFT";
 | |
| 			linux,code = <BTN_DPAD_LEFT>;
 | |
| 			gpios = <&gpio GPIOX_2 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		dpad-right-button {
 | |
| 			label = "DPAD-RIGHT";
 | |
| 			linux,code = <BTN_DPAD_RIGHT>;
 | |
| 			gpios = <&gpio GPIOX_3 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		a-button {
 | |
| 			label = "A";
 | |
| 			linux,code = <BTN_EAST>;
 | |
| 			gpios = <&gpio GPIOX_4 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		b-button {
 | |
| 			label = "B";
 | |
| 			linux,code = <BTN_SOUTH>;
 | |
| 			gpios = <&gpio GPIOX_5 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		y-button {
 | |
| 			label = "Y";
 | |
| 			linux,code = <BTN_WEST>;
 | |
| 			gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		x-button {
 | |
| 			label = "X";
 | |
| 			linux,code = <BTN_NORTH>;
 | |
| 			gpios = <&gpio GPIOX_7 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		f1-button {
 | |
| 			label = "F1";
 | |
| 			linux,code = <BTN_TRIGGER_HAPPY1>;
 | |
| 			gpios = <&gpio GPIOX_17 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		f2-button {
 | |
| 			label = "F2";
 | |
| 			linux,code = <BTN_TRIGGER_HAPPY2>;
 | |
| 			gpios = <&gpio GPIOX_10 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		f3-button {
 | |
| 			label = "F3";
 | |
| 			linux,code = <BTN_TRIGGER_HAPPY3>;
 | |
| 			gpios = <&gpio GPIOX_11 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		f4-button {
 | |
| 			label = "F4";
 | |
| 			linux,code = <BTN_TRIGGER_HAPPY4>;
 | |
| 			gpios = <&gpio GPIOX_12 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		f5-button {
 | |
| 			label = "F5";
 | |
| 			linux,code = <BTN_TRIGGER_HAPPY5>;
 | |
| 			gpios = <&gpio GPIOX_13 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		f6-button {
 | |
| 			label = "F6";
 | |
| 			linux,code = <BTN_TRIGGER_HAPPY6>;
 | |
| 			gpios = <&gpio GPIOX_16 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		top-left-button {
 | |
| 			label = "TOP Left";
 | |
| 			linux,code = <BTN_TL>;
 | |
| 			gpios = <&gpio GPIOX_14 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		top-left2-button {
 | |
| 			label = "TOP Left 2";
 | |
| 			linux,code = <BTN_TL2>;
 | |
| 			gpios = <&gpio GPIOX_19 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		top-right-button {
 | |
| 			label = "TOP Right";
 | |
| 			linux,code = <BTN_TR>;
 | |
| 			gpios = <&gpio GPIOX_15 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 		top-right2-button {
 | |
| 			label = "TOP Right 2";
 | |
| 			linux,code = <BTN_TR2>;
 | |
| 			gpios = <&gpio GPIOX_18 GPIO_ACTIVE_LOW>;
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	memory@0 {
 | |
| 		device_type = "memory";
 | |
| 		reg = <0x0 0x0 0x0 0x40000000>;
 | |
| 	};
 | |
| 
 | |
| 	emmc_pwrseq: emmc-pwrseq {
 | |
| 		compatible = "mmc-pwrseq-emmc";
 | |
| 		reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
 | |
| 	};
 | |
| 
 | |
| 	leds {
 | |
| 		compatible = "gpio-leds";
 | |
| 
 | |
| 		led-blue {
 | |
| 			color = <LED_COLOR_ID_BLUE>;
 | |
| 			gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
 | |
| 			linux,default-trigger = "heartbeat";
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	vdd_sys: regulator-vdd-sys {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		regulator-name = "VDD_SYS";
 | |
| 		regulator-min-microvolt = <3800000>;
 | |
| 		regulator-max-microvolt = <3800000>;
 | |
| 		regulator-always-on;
 | |
| 	};
 | |
| 
 | |
| 	sound {
 | |
| 		compatible = "amlogic,axg-sound-card";
 | |
| 		model = "Odroid GO Ultra";
 | |
| 		audio-widgets = "Microphone", "Mic Jack",
 | |
| 				"Headphone", "Headphones",
 | |
| 				"Speaker", "Internal Speakers";
 | |
| 		audio-aux-devs = <&tdmout_b>, <&tdmin_b>, <&speaker_amp>;
 | |
| 		audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
 | |
| 				"TDM_B Playback", "TDMOUT_B OUT",
 | |
| 				"TDMIN_B IN 1", "TDM_B Capture",
 | |
| 				"TDMIN_B IN 4", "TDM_B Loopback",
 | |
| 				"TODDR_A IN 1", "TDMIN_B OUT",
 | |
| 				"MICL", "Mic Jack",
 | |
| 				"Headphones", "HPOL",
 | |
| 				"Headphones", "HPOR",
 | |
| 				"Speaker Amplifier INL", "HPOL",
 | |
| 				"Speaker Amplifier INR", "HPOR",
 | |
| 				"Internal Speakers", "Speaker Amplifier OUTL",
 | |
| 				"Internal Speakers", "Speaker Amplifier OUTR";
 | |
| 
 | |
| 		clocks = <&clkc CLKID_MPLL2>,
 | |
| 			 <&clkc CLKID_MPLL0>,
 | |
| 			 <&clkc CLKID_MPLL1>;
 | |
| 
 | |
| 		assigned-clocks = <&clkc CLKID_MPLL2>,
 | |
| 				  <&clkc CLKID_MPLL0>,
 | |
| 				  <&clkc CLKID_MPLL1>;
 | |
| 		assigned-clock-parents = <0>, <0>, <0>;
 | |
| 		assigned-clock-rates = <294912000>,
 | |
| 				       <270950400>,
 | |
| 				       <393216000>;
 | |
| 
 | |
| 		dai-link-0 {
 | |
| 			sound-dai = <&frddr_a>;
 | |
| 		};
 | |
| 
 | |
| 		dai-link-1 {
 | |
| 			sound-dai = <&toddr_a>;
 | |
| 		};
 | |
| 
 | |
| 		dai-link-2 {
 | |
| 			sound-dai = <&tdmif_b>;
 | |
| 			dai-format = "i2s";
 | |
| 			dai-tdm-slot-tx-mask-0 = <1 1>;
 | |
| 			mclk-fs = <256>;
 | |
| 
 | |
| 			codec-0 {
 | |
| 				sound-dai = <&rk817>;
 | |
| 			};
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	speaker_amp: speaker-amplifier {
 | |
| 		compatible = "simple-audio-amplifier";
 | |
| 		sound-name-prefix = "Speaker Amplifier";
 | |
| 		VCC-supply = <&hp_5v>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &arb {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &cpu0 {
 | |
| 	cpu-supply = <&vddcpu_b>;
 | |
| 	operating-points-v2 = <&cpu_opp_table_0>;
 | |
| 	clocks = <&clkc CLKID_CPU_CLK>;
 | |
| 	clock-latency = <50000>;
 | |
| };
 | |
| 
 | |
| &cpu1 {
 | |
| 	cpu-supply = <&vddcpu_b>;
 | |
| 	operating-points-v2 = <&cpu_opp_table_0>;
 | |
| 	clocks = <&clkc CLKID_CPU_CLK>;
 | |
| 	clock-latency = <50000>;
 | |
| };
 | |
| 
 | |
| &cpu100 {
 | |
| 	cpu-supply = <&vddcpu_a>;
 | |
| 	operating-points-v2 = <&cpub_opp_table_1>;
 | |
| 	clocks = <&clkc CLKID_CPUB_CLK>;
 | |
| 	clock-latency = <50000>;
 | |
| };
 | |
| 
 | |
| &cpu101 {
 | |
| 	cpu-supply = <&vddcpu_a>;
 | |
| 	operating-points-v2 = <&cpub_opp_table_1>;
 | |
| 	clocks = <&clkc CLKID_CPUB_CLK>;
 | |
| 	clock-latency = <50000>;
 | |
| };
 | |
| 
 | |
| &cpu102 {
 | |
| 	cpu-supply = <&vddcpu_a>;
 | |
| 	operating-points-v2 = <&cpub_opp_table_1>;
 | |
| 	clocks = <&clkc CLKID_CPUB_CLK>;
 | |
| 	clock-latency = <50000>;
 | |
| };
 | |
| 
 | |
| &cpu103 {
 | |
| 	cpu-supply = <&vddcpu_a>;
 | |
| 	operating-points-v2 = <&cpub_opp_table_1>;
 | |
| 	clocks = <&clkc CLKID_CPUB_CLK>;
 | |
| 	clock-latency = <50000>;
 | |
| };
 | |
| 
 | |
| /* RK817 only supports 12.5mV steps, round up the values */
 | |
| &cpu_opp_table_0 {
 | |
| 	opp-1000000000 {
 | |
| 		opp-microvolt = <737500>;
 | |
| 	};
 | |
| 	opp-1200000000 {
 | |
| 		opp-microvolt = <737500>;
 | |
| 	};
 | |
| 	opp-1398000000 {
 | |
| 		opp-microvolt = <762500>;
 | |
| 	};
 | |
| 	opp-1512000000 {
 | |
| 		opp-microvolt = <800000>;
 | |
| 	};
 | |
| 	opp-1608000000 {
 | |
| 		opp-microvolt = <837500>;
 | |
| 	};
 | |
| 	opp-1704000000 {
 | |
| 		opp-microvolt = <862500>;
 | |
| 	};
 | |
| 	opp-1896000000 {
 | |
| 		opp-microvolt = <987500>;
 | |
| 	};
 | |
| 	opp-1992000000 {
 | |
| 		opp-microvolt = <1012500>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| /* RK818 only supports 12.5mV steps, round up the values */
 | |
| &cpub_opp_table_1 {
 | |
| 	opp-1000000000 {
 | |
| 		opp-microvolt = <775000>;
 | |
| 	};
 | |
| 	opp-1200000000 {
 | |
| 		opp-microvolt = <775000>;
 | |
| 	};
 | |
| 	opp-1398000000 {
 | |
| 		opp-microvolt = <800000>;
 | |
| 	};
 | |
| 	opp-1512000000 {
 | |
| 		opp-microvolt = <825000>;
 | |
| 	};
 | |
| 	opp-1608000000 {
 | |
| 		opp-microvolt = <862500>;
 | |
| 	};
 | |
| 	opp-1704000000 {
 | |
| 		opp-microvolt = <900000>;
 | |
| 	};
 | |
| 	opp-1800000000 {
 | |
| 		opp-microvolt = <987500>;
 | |
| 	};
 | |
| 	opp-1908000000 {
 | |
| 		opp-microvolt = <1025000>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &i2c_AO {
 | |
| 	status = "okay";
 | |
| 	pinctrl-0 = <&i2c_ao_sck_pins>, <&i2c_ao_sda_pins>;
 | |
| 	pinctrl-names = "default";
 | |
| 
 | |
| 	rk818: pmic@1c {
 | |
| 		compatible = "rockchip,rk818";
 | |
| 		reg = <0x1c>;
 | |
| 		interrupt-parent = <&gpio_intc>;
 | |
| 		interrupts = <IRQID_GPIOAO_7 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_7 */
 | |
| 		#clock-cells = <1>;
 | |
| 
 | |
| 		vcc1-supply = <&vdd_sys>;
 | |
| 		vcc2-supply = <&vdd_sys>;
 | |
| 		vcc3-supply = <&vdd_sys>;
 | |
| 		vcc4-supply = <&vdd_sys>;
 | |
| 		vcc6-supply = <&vdd_sys>;
 | |
| 		vcc7-supply = <&vcc_2v3>;
 | |
| 		vcc8-supply = <&vcc_2v3>;
 | |
| 		vcc9-supply = <&vddao_3v3>;
 | |
| 		boost-supply = <&vdd_sys>;
 | |
| 
 | |
| 		regulators {
 | |
| 			vddcpu_a: DCDC_REG1 {
 | |
| 				regulator-name = "vddcpu_a";
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-min-microvolt = <775000>;
 | |
| 				regulator-max-microvolt = <1025000>;
 | |
| 				regulator-ramp-delay = <6001>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <775000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vdd_ee: DCDC_REG2 {
 | |
| 				regulator-name = "vdd_ee";
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-min-microvolt = <875000>;
 | |
| 				regulator-max-microvolt = <1250000>;
 | |
| 				regulator-ramp-delay = <6001>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <875000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vddq_1v1: DCDC_REG3 {
 | |
| 				regulator-name = "vddq_1v1";
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vddao_3v3: DCDC_REG4 {
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-min-microvolt = <3300000>;
 | |
| 				regulator-max-microvolt = <3300000>;
 | |
| 				regulator-name = "vddao_3v3";
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <3300000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			hp_5v: DCDC_BOOST {
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-name = "hp_5v";
 | |
| 				regulator-min-microvolt = <5000000>;
 | |
| 				regulator-max-microvolt = <5000000>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vddio_ao1v8: LDO_REG5 {
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-name = "vddio_ao1v8";
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <1800000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vddq_1v8: LDO_REG7 {
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-name = "vddq_1v8";
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <1800000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vddio_c: LDO_REG9 {
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <3300000>;
 | |
| 				regulator-name = "vddio_c";
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <3300000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vcc_sd: SWITCH_REG {
 | |
| 				regulator-name = "vcc_sd";
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-min-microvolt = <3300000>;
 | |
| 				regulator-max-microvolt = <3300000>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			OTG_SWITCH {
 | |
| 				regulator-name = "otg_switch";
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &i2c3 {
 | |
| 	status = "okay";
 | |
| 	pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
 | |
| 	pinctrl-names = "default";
 | |
| 
 | |
| 	rk817: pmic@20 {
 | |
| 		compatible = "rockchip,rk817";
 | |
| 		reg = <0x20>;
 | |
| 		interrupt-parent = <&gpio_intc>;
 | |
| 
 | |
| 		interrupts = <IRQID_GPIOAO_5 IRQ_TYPE_LEVEL_LOW>; /* GPIOAO_5 */
 | |
| 
 | |
| 		vcc1-supply = <&vdd_sys>;
 | |
| 		vcc2-supply = <&vdd_sys>;
 | |
| 		vcc3-supply = <&vdd_sys>;
 | |
| 		vcc4-supply = <&vdd_sys>;
 | |
| 		vcc5-supply = <&vdd_sys>;
 | |
| 		vcc6-supply = <&vdd_sys>;
 | |
| 		vcc7-supply = <&vdd_sys>;
 | |
| 		vcc8-supply = <&vdd_sys>;
 | |
| 		vcc9-supply = <&rk817_boost>;
 | |
| 
 | |
| 		#sound-dai-cells = <0>;
 | |
| 		clocks = <&codec_clk>;
 | |
| 		clock-names = "mclk";
 | |
| 
 | |
| 		#clock-cells = <1>;
 | |
| 
 | |
| 		regulators {
 | |
| 			vddcpu_b: DCDC_REG2 {
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-min-microvolt = <737500>;
 | |
| 				regulator-max-microvolt = <1012500>;
 | |
| 				regulator-ramp-delay = <6001>;
 | |
| 				regulator-initial-mode = <0x2>;
 | |
| 				regulator-name = "vddcpu_b";
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-suspend-microvolt = <1000000>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vcc_2v3: DCDC_REG3 {
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-min-microvolt = <2300000>;
 | |
| 				regulator-max-microvolt = <2400000>;
 | |
| 				regulator-initial-mode = <0x2>;
 | |
| 				regulator-name = "vcc_2v3";
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			LDO_REG4 {
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-min-microvolt = <3300000>;
 | |
| 				regulator-max-microvolt = <3300000>;
 | |
| 				regulator-name = "vdd_codec";
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vcc_lcd: LDO_REG8 {
 | |
| 				regulator-min-microvolt = <3300000>;
 | |
| 				regulator-max-microvolt = <3300000>;
 | |
| 				regulator-name = "vcc_lcd";
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			rk817_boost: BOOST {
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-min-microvolt = <5000000>;
 | |
| 				regulator-max-microvolt = <5400000>;
 | |
| 				regulator-name = "rk817_boost";
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			usb_host: OTG_SWITCH {
 | |
| 				regulator-name = "usb_host";
 | |
| 				regulator-min-microvolt = <5000000>;
 | |
| 				regulator-max-microvolt = <5000000>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &clkc_audio {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| ð_phy {
 | |
| 	status = "disabled";
 | |
| };
 | |
| 
 | |
| &frddr_a {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &periphs_pinctrl {
 | |
| 	keypad_gpio_pins: keypad-gpio-state {
 | |
| 		mux {
 | |
| 			groups = "GPIOX_0", "GPIOX_1", "GPIOX_2", "GPIOX_3",
 | |
| 			         "GPIOX_4", "GPIOX_5", "GPIOX_6", "GPIOX_7",
 | |
| 				 "GPIOX_8", "GPIOX_9", "GPIOX_10", "GPIOX_11",
 | |
| 				 "GPIOX_12", "GPIOX_13", "GPIOX_14",  "GPIOX_15",
 | |
| 				 "GPIOX_16", "GPIOX_17", "GPIOX_18",  "GPIOX_19";
 | |
| 			function = "gpio_periphs";
 | |
| 			bias-pull-up;
 | |
| 			output-disable;
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &saradc {
 | |
| 	status = "okay";
 | |
| 	vref-supply = <&vddio_ao1v8>;
 | |
| };
 | |
| 
 | |
| /* SD card */
 | |
| &sd_emmc_b {
 | |
| 	status = "okay";
 | |
| 	pinctrl-0 = <&sdcard_c_pins>;
 | |
| 	pinctrl-1 = <&sdcard_clk_gate_c_pins>;
 | |
| 	pinctrl-names = "default", "clk-gate";
 | |
| 
 | |
| 	bus-width = <4>;
 | |
| 	cap-sd-highspeed;
 | |
| 	max-frequency = <50000000>;
 | |
| 	disable-wp;
 | |
| 
 | |
| 	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
 | |
| 	vmmc-supply = <&vcc_sd>;
 | |
| 	vqmmc-supply = <&vddio_c>;
 | |
| 
 | |
| };
 | |
| 
 | |
| /* eMMC */
 | |
| &sd_emmc_c {
 | |
| 	status = "okay";
 | |
| 	pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
 | |
| 	pinctrl-1 = <&emmc_clk_gate_pins>;
 | |
| 	pinctrl-names = "default", "clk-gate";
 | |
| 
 | |
| 	bus-width = <8>;
 | |
| 	cap-mmc-highspeed;
 | |
| 	mmc-ddr-1_8v;
 | |
| 	mmc-hs200-1_8v;
 | |
| 	max-frequency = <200000000>;
 | |
| 	disable-wp;
 | |
| 
 | |
| 	mmc-pwrseq = <&emmc_pwrseq>;
 | |
| 	vmmc-supply = <&vcc_sd>;
 | |
| 	vqmmc-supply = <&vddio_ao1v8>;
 | |
| };
 | |
| 
 | |
| 
 | |
| &tdmif_b {
 | |
| 	pinctrl-0 = <&tdm_b_dout0_pins>, <&tdm_b_fs_pins>, <&tdm_b_sclk_pins>, <&tdm_b_din1_pins>;
 | |
| 	pinctrl-names = "default";
 | |
| 	status = "okay";
 | |
| 
 | |
| 	assigned-clocks = <&clkc_audio AUD_CLKID_TDM_SCLK_PAD1>,
 | |
| 			  <&clkc_audio AUD_CLKID_TDM_LRCLK_PAD1>;
 | |
| 	assigned-clock-parents = <&clkc_audio AUD_CLKID_MST_B_SCLK>,
 | |
| 				 <&clkc_audio AUD_CLKID_MST_B_LRCLK>;
 | |
| 	assigned-clock-rates = <0>, <0>;
 | |
| };
 | |
| 
 | |
| &tdmin_b {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &tdmout_b {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &toddr_a {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &uart_AO {
 | |
| 	status = "okay";
 | |
| 	pinctrl-0 = <&uart_ao_a_pins>;
 | |
| 	pinctrl-names = "default";
 | |
| };
 | |
| 
 | |
| &usb {
 | |
| 	status = "okay";
 | |
| 	dr_mode = "peripheral";
 | |
| };
 | |
| 
 | |
| &usb2_phy0 {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &usb2_phy1 {
 | |
| 	status = "okay";
 | |
| 	phy-supply = <&usb_host>;
 | |
| };
 |