619 lines
		
	
	
		
			15 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			619 lines
		
	
	
		
			15 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * LP5562 LED driver
 | |
|  *
 | |
|  * Copyright (C) 2013 Texas Instruments
 | |
|  *
 | |
|  * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
 | |
|  */
 | |
| 
 | |
| #include <linux/delay.h>
 | |
| #include <linux/firmware.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/leds.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/mutex.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/platform_data/leds-lp55xx.h>
 | |
| #include <linux/slab.h>
 | |
| 
 | |
| #include "leds-lp55xx-common.h"
 | |
| 
 | |
| #define LP5562_PROGRAM_LENGTH		32
 | |
| #define LP5562_MAX_LEDS			4
 | |
| 
 | |
| /* ENABLE Register 00h */
 | |
| #define LP5562_REG_ENABLE		0x00
 | |
| #define LP5562_EXEC_ENG1_M		0x30
 | |
| #define LP5562_EXEC_ENG2_M		0x0C
 | |
| #define LP5562_EXEC_ENG3_M		0x03
 | |
| #define LP5562_EXEC_M			0x3F
 | |
| #define LP5562_MASTER_ENABLE		0x40	/* Chip master enable */
 | |
| #define LP5562_LOGARITHMIC_PWM		0x80	/* Logarithmic PWM adjustment */
 | |
| #define LP5562_EXEC_RUN			0x2A
 | |
| #define LP5562_ENABLE_DEFAULT	\
 | |
| 	(LP5562_MASTER_ENABLE | LP5562_LOGARITHMIC_PWM)
 | |
| #define LP5562_ENABLE_RUN_PROGRAM	\
 | |
| 	(LP5562_ENABLE_DEFAULT | LP5562_EXEC_RUN)
 | |
| 
 | |
| /* OPMODE Register 01h */
 | |
| #define LP5562_REG_OP_MODE		0x01
 | |
| #define LP5562_MODE_ENG1_M		0x30
 | |
| #define LP5562_MODE_ENG2_M		0x0C
 | |
| #define LP5562_MODE_ENG3_M		0x03
 | |
| #define LP5562_LOAD_ENG1		0x10
 | |
| #define LP5562_LOAD_ENG2		0x04
 | |
| #define LP5562_LOAD_ENG3		0x01
 | |
| #define LP5562_RUN_ENG1			0x20
 | |
| #define LP5562_RUN_ENG2			0x08
 | |
| #define LP5562_RUN_ENG3			0x02
 | |
| #define LP5562_ENG1_IS_LOADING(mode)	\
 | |
| 	((mode & LP5562_MODE_ENG1_M) == LP5562_LOAD_ENG1)
 | |
| #define LP5562_ENG2_IS_LOADING(mode)	\
 | |
| 	((mode & LP5562_MODE_ENG2_M) == LP5562_LOAD_ENG2)
 | |
| #define LP5562_ENG3_IS_LOADING(mode)	\
 | |
| 	((mode & LP5562_MODE_ENG3_M) == LP5562_LOAD_ENG3)
 | |
| 
 | |
| /* BRIGHTNESS Registers */
 | |
| #define LP5562_REG_R_PWM		0x04
 | |
| #define LP5562_REG_G_PWM		0x03
 | |
| #define LP5562_REG_B_PWM		0x02
 | |
| #define LP5562_REG_W_PWM		0x0E
 | |
| 
 | |
| /* CURRENT Registers */
 | |
| #define LP5562_REG_R_CURRENT		0x07
 | |
| #define LP5562_REG_G_CURRENT		0x06
 | |
| #define LP5562_REG_B_CURRENT		0x05
 | |
| #define LP5562_REG_W_CURRENT		0x0F
 | |
| 
 | |
| /* CONFIG Register 08h */
 | |
| #define LP5562_REG_CONFIG		0x08
 | |
| #define LP5562_PWM_HF			0x40
 | |
| #define LP5562_PWRSAVE_EN		0x20
 | |
| #define LP5562_CLK_INT			0x01	/* Internal clock */
 | |
| #define LP5562_DEFAULT_CFG		(LP5562_PWM_HF | LP5562_PWRSAVE_EN)
 | |
| 
 | |
| /* RESET Register 0Dh */
 | |
| #define LP5562_REG_RESET		0x0D
 | |
| #define LP5562_RESET			0xFF
 | |
| 
 | |
| /* PROGRAM ENGINE Registers */
 | |
| #define LP5562_REG_PROG_MEM_ENG1	0x10
 | |
| #define LP5562_REG_PROG_MEM_ENG2	0x30
 | |
| #define LP5562_REG_PROG_MEM_ENG3	0x50
 | |
| 
 | |
| /* LEDMAP Register 70h */
 | |
| #define LP5562_REG_ENG_SEL		0x70
 | |
| #define LP5562_ENG_SEL_PWM		0
 | |
| #define LP5562_ENG_FOR_RGB_M		0x3F
 | |
| #define LP5562_ENG_SEL_RGB		0x1B	/* R:ENG1, G:ENG2, B:ENG3 */
 | |
| #define LP5562_ENG_FOR_W_M		0xC0
 | |
| #define LP5562_ENG1_FOR_W		0x40	/* W:ENG1 */
 | |
| #define LP5562_ENG2_FOR_W		0x80	/* W:ENG2 */
 | |
| #define LP5562_ENG3_FOR_W		0xC0	/* W:ENG3 */
 | |
| 
 | |
| /* Program Commands */
 | |
| #define LP5562_CMD_DISABLE		0x00
 | |
| #define LP5562_CMD_LOAD			0x15
 | |
| #define LP5562_CMD_RUN			0x2A
 | |
| #define LP5562_CMD_DIRECT		0x3F
 | |
| #define LP5562_PATTERN_OFF		0
 | |
| 
 | |
| static inline void lp5562_wait_opmode_done(void)
 | |
| {
 | |
| 	/* operation mode change needs to be longer than 153 us */
 | |
| 	usleep_range(200, 300);
 | |
| }
 | |
| 
 | |
| static inline void lp5562_wait_enable_done(void)
 | |
| {
 | |
| 	/* it takes more 488 us to update ENABLE register */
 | |
| 	usleep_range(500, 600);
 | |
| }
 | |
| 
 | |
| static void lp5562_set_led_current(struct lp55xx_led *led, u8 led_current)
 | |
| {
 | |
| 	static const u8 addr[] = {
 | |
| 		LP5562_REG_R_CURRENT,
 | |
| 		LP5562_REG_G_CURRENT,
 | |
| 		LP5562_REG_B_CURRENT,
 | |
| 		LP5562_REG_W_CURRENT,
 | |
| 	};
 | |
| 
 | |
| 	led->led_current = led_current;
 | |
| 	lp55xx_write(led->chip, addr[led->chan_nr], led_current);
 | |
| }
 | |
| 
 | |
| static void lp5562_load_engine(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	enum lp55xx_engine_index idx = chip->engine_idx;
 | |
| 	static const u8 mask[] = {
 | |
| 		[LP55XX_ENGINE_1] = LP5562_MODE_ENG1_M,
 | |
| 		[LP55XX_ENGINE_2] = LP5562_MODE_ENG2_M,
 | |
| 		[LP55XX_ENGINE_3] = LP5562_MODE_ENG3_M,
 | |
| 	};
 | |
| 
 | |
| 	static const u8 val[] = {
 | |
| 		[LP55XX_ENGINE_1] = LP5562_LOAD_ENG1,
 | |
| 		[LP55XX_ENGINE_2] = LP5562_LOAD_ENG2,
 | |
| 		[LP55XX_ENGINE_3] = LP5562_LOAD_ENG3,
 | |
| 	};
 | |
| 
 | |
| 	lp55xx_update_bits(chip, LP5562_REG_OP_MODE, mask[idx], val[idx]);
 | |
| 
 | |
| 	lp5562_wait_opmode_done();
 | |
| }
 | |
| 
 | |
| static void lp5562_stop_engine(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DISABLE);
 | |
| 	lp5562_wait_opmode_done();
 | |
| }
 | |
| 
 | |
| static void lp5562_run_engine(struct lp55xx_chip *chip, bool start)
 | |
| {
 | |
| 	int ret;
 | |
| 	u8 mode;
 | |
| 	u8 exec;
 | |
| 
 | |
| 	/* stop engine */
 | |
| 	if (!start) {
 | |
| 		lp55xx_write(chip, LP5562_REG_ENABLE, LP5562_ENABLE_DEFAULT);
 | |
| 		lp5562_wait_enable_done();
 | |
| 		lp5562_stop_engine(chip);
 | |
| 		lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
 | |
| 		lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
 | |
| 		lp5562_wait_opmode_done();
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * To run the engine,
 | |
| 	 * operation mode and enable register should updated at the same time
 | |
| 	 */
 | |
| 
 | |
| 	ret = lp55xx_read(chip, LP5562_REG_OP_MODE, &mode);
 | |
| 	if (ret)
 | |
| 		return;
 | |
| 
 | |
| 	ret = lp55xx_read(chip, LP5562_REG_ENABLE, &exec);
 | |
| 	if (ret)
 | |
| 		return;
 | |
| 
 | |
| 	/* change operation mode to RUN only when each engine is loading */
 | |
| 	if (LP5562_ENG1_IS_LOADING(mode)) {
 | |
| 		mode = (mode & ~LP5562_MODE_ENG1_M) | LP5562_RUN_ENG1;
 | |
| 		exec = (exec & ~LP5562_EXEC_ENG1_M) | LP5562_RUN_ENG1;
 | |
| 	}
 | |
| 
 | |
| 	if (LP5562_ENG2_IS_LOADING(mode)) {
 | |
| 		mode = (mode & ~LP5562_MODE_ENG2_M) | LP5562_RUN_ENG2;
 | |
| 		exec = (exec & ~LP5562_EXEC_ENG2_M) | LP5562_RUN_ENG2;
 | |
| 	}
 | |
| 
 | |
| 	if (LP5562_ENG3_IS_LOADING(mode)) {
 | |
| 		mode = (mode & ~LP5562_MODE_ENG3_M) | LP5562_RUN_ENG3;
 | |
| 		exec = (exec & ~LP5562_EXEC_ENG3_M) | LP5562_RUN_ENG3;
 | |
| 	}
 | |
| 
 | |
| 	lp55xx_write(chip, LP5562_REG_OP_MODE, mode);
 | |
| 	lp5562_wait_opmode_done();
 | |
| 
 | |
| 	lp55xx_update_bits(chip, LP5562_REG_ENABLE, LP5562_EXEC_M, exec);
 | |
| 	lp5562_wait_enable_done();
 | |
| }
 | |
| 
 | |
| static int lp5562_update_firmware(struct lp55xx_chip *chip,
 | |
| 					const u8 *data, size_t size)
 | |
| {
 | |
| 	enum lp55xx_engine_index idx = chip->engine_idx;
 | |
| 	u8 pattern[LP5562_PROGRAM_LENGTH] = {0};
 | |
| 	static const u8 addr[] = {
 | |
| 		[LP55XX_ENGINE_1] = LP5562_REG_PROG_MEM_ENG1,
 | |
| 		[LP55XX_ENGINE_2] = LP5562_REG_PROG_MEM_ENG2,
 | |
| 		[LP55XX_ENGINE_3] = LP5562_REG_PROG_MEM_ENG3,
 | |
| 	};
 | |
| 	unsigned cmd;
 | |
| 	char c[3];
 | |
| 	int program_size;
 | |
| 	int nrchars;
 | |
| 	int offset = 0;
 | |
| 	int ret;
 | |
| 	int i;
 | |
| 
 | |
| 	/* clear program memory before updating */
 | |
| 	for (i = 0; i < LP5562_PROGRAM_LENGTH; i++)
 | |
| 		lp55xx_write(chip, addr[idx] + i, 0);
 | |
| 
 | |
| 	i = 0;
 | |
| 	while ((offset < size - 1) && (i < LP5562_PROGRAM_LENGTH)) {
 | |
| 		/* separate sscanfs because length is working only for %s */
 | |
| 		ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
 | |
| 		if (ret != 1)
 | |
| 			goto err;
 | |
| 
 | |
| 		ret = sscanf(c, "%2x", &cmd);
 | |
| 		if (ret != 1)
 | |
| 			goto err;
 | |
| 
 | |
| 		pattern[i] = (u8)cmd;
 | |
| 		offset += nrchars;
 | |
| 		i++;
 | |
| 	}
 | |
| 
 | |
| 	/* Each instruction is 16bit long. Check that length is even */
 | |
| 	if (i % 2)
 | |
| 		goto err;
 | |
| 
 | |
| 	program_size = i;
 | |
| 	for (i = 0; i < program_size; i++)
 | |
| 		lp55xx_write(chip, addr[idx] + i, pattern[i]);
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err:
 | |
| 	dev_err(&chip->cl->dev, "wrong pattern format\n");
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| static void lp5562_firmware_loaded(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	const struct firmware *fw = chip->fw;
 | |
| 
 | |
| 	/*
 | |
| 	 * the firmware is encoded in ascii hex character, with 2 chars
 | |
| 	 * per byte
 | |
| 	 */
 | |
| 	if (fw->size > (LP5562_PROGRAM_LENGTH * 2)) {
 | |
| 		dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
 | |
| 			fw->size);
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Program memory sequence
 | |
| 	 *  1) set engine mode to "LOAD"
 | |
| 	 *  2) write firmware data into program memory
 | |
| 	 */
 | |
| 
 | |
| 	lp5562_load_engine(chip);
 | |
| 	lp5562_update_firmware(chip, fw->data, fw->size);
 | |
| }
 | |
| 
 | |
| static int lp5562_post_init_device(struct lp55xx_chip *chip)
 | |
| {
 | |
| 	int ret;
 | |
| 	u8 cfg = LP5562_DEFAULT_CFG;
 | |
| 
 | |
| 	/* Set all PWMs to direct control mode */
 | |
| 	ret = lp55xx_write(chip, LP5562_REG_OP_MODE, LP5562_CMD_DIRECT);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	lp5562_wait_opmode_done();
 | |
| 
 | |
| 	/* Update configuration for the clock setting */
 | |
| 	if (!lp55xx_is_extclk_used(chip))
 | |
| 		cfg |= LP5562_CLK_INT;
 | |
| 
 | |
| 	ret = lp55xx_write(chip, LP5562_REG_CONFIG, cfg);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	/* Initialize all channels PWM to zero -> leds off */
 | |
| 	lp55xx_write(chip, LP5562_REG_R_PWM, 0);
 | |
| 	lp55xx_write(chip, LP5562_REG_G_PWM, 0);
 | |
| 	lp55xx_write(chip, LP5562_REG_B_PWM, 0);
 | |
| 	lp55xx_write(chip, LP5562_REG_W_PWM, 0);
 | |
| 
 | |
| 	/* Set LED map as register PWM by default */
 | |
| 	lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_PWM);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int lp5562_led_brightness(struct lp55xx_led *led)
 | |
| {
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 	static const u8 addr[] = {
 | |
| 		LP5562_REG_R_PWM,
 | |
| 		LP5562_REG_G_PWM,
 | |
| 		LP5562_REG_B_PWM,
 | |
| 		LP5562_REG_W_PWM,
 | |
| 	};
 | |
| 	int ret;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 	ret = lp55xx_write(chip, addr[led->chan_nr], led->brightness);
 | |
| 	mutex_unlock(&chip->lock);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void lp5562_write_program_memory(struct lp55xx_chip *chip,
 | |
| 					u8 base, const u8 *rgb, int size)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	if (!rgb || size <= 0)
 | |
| 		return;
 | |
| 
 | |
| 	for (i = 0; i < size; i++)
 | |
| 		lp55xx_write(chip, base + i, *(rgb + i));
 | |
| 
 | |
| 	lp55xx_write(chip, base + i, 0);
 | |
| 	lp55xx_write(chip, base + i + 1, 0);
 | |
| }
 | |
| 
 | |
| /* check the size of program count */
 | |
| static inline bool _is_pc_overflow(struct lp55xx_predef_pattern *ptn)
 | |
| {
 | |
| 	return ptn->size_r >= LP5562_PROGRAM_LENGTH ||
 | |
| 	       ptn->size_g >= LP5562_PROGRAM_LENGTH ||
 | |
| 	       ptn->size_b >= LP5562_PROGRAM_LENGTH;
 | |
| }
 | |
| 
 | |
| static int lp5562_run_predef_led_pattern(struct lp55xx_chip *chip, int mode)
 | |
| {
 | |
| 	struct lp55xx_predef_pattern *ptn;
 | |
| 	int i;
 | |
| 
 | |
| 	if (mode == LP5562_PATTERN_OFF) {
 | |
| 		lp5562_run_engine(chip, false);
 | |
| 		return 0;
 | |
| 	}
 | |
| 
 | |
| 	ptn = chip->pdata->patterns + (mode - 1);
 | |
| 	if (!ptn || _is_pc_overflow(ptn)) {
 | |
| 		dev_err(&chip->cl->dev, "invalid pattern data\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	lp5562_stop_engine(chip);
 | |
| 
 | |
| 	/* Set LED map as RGB */
 | |
| 	lp55xx_write(chip, LP5562_REG_ENG_SEL, LP5562_ENG_SEL_RGB);
 | |
| 
 | |
| 	/* Load engines */
 | |
| 	for (i = LP55XX_ENGINE_1; i <= LP55XX_ENGINE_3; i++) {
 | |
| 		chip->engine_idx = i;
 | |
| 		lp5562_load_engine(chip);
 | |
| 	}
 | |
| 
 | |
| 	/* Clear program registers */
 | |
| 	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1, 0);
 | |
| 	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG1 + 1, 0);
 | |
| 	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2, 0);
 | |
| 	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG2 + 1, 0);
 | |
| 	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3, 0);
 | |
| 	lp55xx_write(chip, LP5562_REG_PROG_MEM_ENG3 + 1, 0);
 | |
| 
 | |
| 	/* Program engines */
 | |
| 	lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG1,
 | |
| 				ptn->r, ptn->size_r);
 | |
| 	lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG2,
 | |
| 				ptn->g, ptn->size_g);
 | |
| 	lp5562_write_program_memory(chip, LP5562_REG_PROG_MEM_ENG3,
 | |
| 				ptn->b, ptn->size_b);
 | |
| 
 | |
| 	/* Run engines */
 | |
| 	lp5562_run_engine(chip, true);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static ssize_t lp5562_store_pattern(struct device *dev,
 | |
| 				struct device_attribute *attr,
 | |
| 				const char *buf, size_t len)
 | |
| {
 | |
| 	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 	struct lp55xx_predef_pattern *ptn = chip->pdata->patterns;
 | |
| 	int num_patterns = chip->pdata->num_patterns;
 | |
| 	unsigned long mode;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = kstrtoul(buf, 0, &mode);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	if (mode > num_patterns || !ptn)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 	ret = lp5562_run_predef_led_pattern(chip, mode);
 | |
| 	mutex_unlock(&chip->lock);
 | |
| 
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	return len;
 | |
| }
 | |
| 
 | |
| static ssize_t lp5562_store_engine_mux(struct device *dev,
 | |
| 				     struct device_attribute *attr,
 | |
| 				     const char *buf, size_t len)
 | |
| {
 | |
| 	struct lp55xx_led *led = i2c_get_clientdata(to_i2c_client(dev));
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 	u8 mask;
 | |
| 	u8 val;
 | |
| 
 | |
| 	/* LED map
 | |
| 	 * R ... Engine 1 (fixed)
 | |
| 	 * G ... Engine 2 (fixed)
 | |
| 	 * B ... Engine 3 (fixed)
 | |
| 	 * W ... Engine 1 or 2 or 3
 | |
| 	 */
 | |
| 
 | |
| 	if (sysfs_streq(buf, "RGB")) {
 | |
| 		mask = LP5562_ENG_FOR_RGB_M;
 | |
| 		val = LP5562_ENG_SEL_RGB;
 | |
| 	} else if (sysfs_streq(buf, "W")) {
 | |
| 		enum lp55xx_engine_index idx = chip->engine_idx;
 | |
| 
 | |
| 		mask = LP5562_ENG_FOR_W_M;
 | |
| 		switch (idx) {
 | |
| 		case LP55XX_ENGINE_1:
 | |
| 			val = LP5562_ENG1_FOR_W;
 | |
| 			break;
 | |
| 		case LP55XX_ENGINE_2:
 | |
| 			val = LP5562_ENG2_FOR_W;
 | |
| 			break;
 | |
| 		case LP55XX_ENGINE_3:
 | |
| 			val = LP5562_ENG3_FOR_W;
 | |
| 			break;
 | |
| 		default:
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 
 | |
| 	} else {
 | |
| 		dev_err(dev, "choose RGB or W\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	mutex_lock(&chip->lock);
 | |
| 	lp55xx_update_bits(chip, LP5562_REG_ENG_SEL, mask, val);
 | |
| 	mutex_unlock(&chip->lock);
 | |
| 
 | |
| 	return len;
 | |
| }
 | |
| 
 | |
| static LP55XX_DEV_ATTR_WO(led_pattern, lp5562_store_pattern);
 | |
| static LP55XX_DEV_ATTR_WO(engine_mux, lp5562_store_engine_mux);
 | |
| 
 | |
| static struct attribute *lp5562_attributes[] = {
 | |
| 	&dev_attr_led_pattern.attr,
 | |
| 	&dev_attr_engine_mux.attr,
 | |
| 	NULL,
 | |
| };
 | |
| 
 | |
| static const struct attribute_group lp5562_group = {
 | |
| 	.attrs = lp5562_attributes,
 | |
| };
 | |
| 
 | |
| /* Chip specific configurations */
 | |
| static struct lp55xx_device_config lp5562_cfg = {
 | |
| 	.max_channel  = LP5562_MAX_LEDS,
 | |
| 	.reset = {
 | |
| 		.addr = LP5562_REG_RESET,
 | |
| 		.val  = LP5562_RESET,
 | |
| 	},
 | |
| 	.enable = {
 | |
| 		.addr = LP5562_REG_ENABLE,
 | |
| 		.val  = LP5562_ENABLE_DEFAULT,
 | |
| 	},
 | |
| 	.post_init_device   = lp5562_post_init_device,
 | |
| 	.set_led_current    = lp5562_set_led_current,
 | |
| 	.brightness_fn      = lp5562_led_brightness,
 | |
| 	.run_engine         = lp5562_run_engine,
 | |
| 	.firmware_cb        = lp5562_firmware_loaded,
 | |
| 	.dev_attr_group     = &lp5562_group,
 | |
| };
 | |
| 
 | |
| static int lp5562_probe(struct i2c_client *client,
 | |
| 			const struct i2c_device_id *id)
 | |
| {
 | |
| 	int ret;
 | |
| 	struct lp55xx_chip *chip;
 | |
| 	struct lp55xx_led *led;
 | |
| 	struct lp55xx_platform_data *pdata = dev_get_platdata(&client->dev);
 | |
| 	struct device_node *np = dev_of_node(&client->dev);
 | |
| 
 | |
| 	chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
 | |
| 	if (!chip)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	chip->cfg = &lp5562_cfg;
 | |
| 
 | |
| 	if (!pdata) {
 | |
| 		if (np) {
 | |
| 			pdata = lp55xx_of_populate_pdata(&client->dev, np,
 | |
| 							 chip);
 | |
| 			if (IS_ERR(pdata))
 | |
| 				return PTR_ERR(pdata);
 | |
| 		} else {
 | |
| 			dev_err(&client->dev, "no platform data\n");
 | |
| 			return -EINVAL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 
 | |
| 	led = devm_kcalloc(&client->dev,
 | |
| 			pdata->num_channels, sizeof(*led), GFP_KERNEL);
 | |
| 	if (!led)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	chip->cl = client;
 | |
| 	chip->pdata = pdata;
 | |
| 
 | |
| 	mutex_init(&chip->lock);
 | |
| 
 | |
| 	i2c_set_clientdata(client, led);
 | |
| 
 | |
| 	ret = lp55xx_init_device(chip);
 | |
| 	if (ret)
 | |
| 		goto err_init;
 | |
| 
 | |
| 	ret = lp55xx_register_leds(led, chip);
 | |
| 	if (ret)
 | |
| 		goto err_out;
 | |
| 
 | |
| 	ret = lp55xx_register_sysfs(chip);
 | |
| 	if (ret) {
 | |
| 		dev_err(&client->dev, "registering sysfs failed\n");
 | |
| 		goto err_out;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| err_out:
 | |
| 	lp55xx_deinit_device(chip);
 | |
| err_init:
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int lp5562_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct lp55xx_led *led = i2c_get_clientdata(client);
 | |
| 	struct lp55xx_chip *chip = led->chip;
 | |
| 
 | |
| 	lp5562_stop_engine(chip);
 | |
| 
 | |
| 	lp55xx_unregister_sysfs(chip);
 | |
| 	lp55xx_deinit_device(chip);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct i2c_device_id lp5562_id[] = {
 | |
| 	{ "lp5562", 0 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, lp5562_id);
 | |
| 
 | |
| #ifdef CONFIG_OF
 | |
| static const struct of_device_id of_lp5562_leds_match[] = {
 | |
| 	{ .compatible = "ti,lp5562", },
 | |
| 	{},
 | |
| };
 | |
| 
 | |
| MODULE_DEVICE_TABLE(of, of_lp5562_leds_match);
 | |
| #endif
 | |
| 
 | |
| static struct i2c_driver lp5562_driver = {
 | |
| 	.driver = {
 | |
| 		.name	= "lp5562",
 | |
| 		.of_match_table = of_match_ptr(of_lp5562_leds_match),
 | |
| 	},
 | |
| 	.probe		= lp5562_probe,
 | |
| 	.remove		= lp5562_remove,
 | |
| 	.id_table	= lp5562_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(lp5562_driver);
 | |
| 
 | |
| MODULE_DESCRIPTION("Texas Instruments LP5562 LED Driver");
 | |
| MODULE_AUTHOR("Milo Kim");
 | |
| MODULE_LICENSE("GPL");
 |