almalinux/kernel
14
0
Fork 0
Code Issues Pull Requests Releases Activity
a9
kernel/tools/testing/selftests/cgroup/test_cpuset_prs.sh

1194 lines
36 KiB
Bash
Executable File
Raw Permalink Blame History

#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# Test for cpuset v2 partition root state (PRS)
#
# The sched verbose flag can be optionally set so that the console log
# can be examined for the correct setting of scheduling domain.
#
skip_test() {
echo "$1"
echo "Test SKIPPED"
exit 4 # ksft_skip
}
[[ $(id -u) -eq 0 ]] || skip_test "Test must be run as root!"
# Get wait_inotify location
WAIT_INOTIFY=$(cd $(dirname $0); pwd)/wait_inotify
# Find cgroup v2 mount point
CGROUP2=$(mount -t cgroup2 | head -1 | awk -e '{print $3}')
[[ -n "$CGROUP2" ]] || skip_test "Cgroup v2 mount point not found!"
SUBPARTS_CPUS=$CGROUP2/.__DEBUG__.cpuset.cpus.subpartitions
CPULIST=$(cat $CGROUP2/cpuset.cpus.effective)
NR_CPUS=$(lscpu | grep "^CPU(s):" | sed -e "s/.*:[[:space:]]*//")
[[ $NR_CPUS -lt 8 ]] && skip_test "Test needs at least 8 cpus available!"
# Check to see if /dev/console exists and is writable
if [[ -c /dev/console && -w /dev/console ]]
then
CONSOLE=/dev/console
else
CONSOLE=/dev/null
fi
# Set verbose flag and delay factor
PROG=$1
VERBOSE=0
DELAY_FACTOR=1
SCHED_DEBUG=
while [[ "$1" = -* ]]
do
case "$1" in
-v) ((VERBOSE++))
# Enable sched/verbose can slow thing down
[[ $DELAY_FACTOR -eq 1 ]] &&
DELAY_FACTOR=2
;;
-d) DELAY_FACTOR=$2
shift
;;
*) echo "Usage: $PROG [-v] [-d <delay-factor>"
exit
;;
esac
shift
done
# Set sched verbose flag if available when "-v" option is specified
if [[ $VERBOSE -gt 0 && -d /sys/kernel/debug/sched ]]
then
# Used to restore the original setting during cleanup
SCHED_DEBUG=$(cat /sys/kernel/debug/sched/verbose)
echo Y > /sys/kernel/debug/sched/verbose
fi
cd $CGROUP2
echo +cpuset > cgroup.subtree_control
#
# If cpuset has been set up and used in child cgroups, we may not be able to
# create partition under root cgroup because of the CPU exclusivity rule.
# So we are going to skip the test if this is the case.
#
[[ -d test ]] || mkdir test
echo 0-6 > test/cpuset.cpus
echo root > test/cpuset.cpus.partition
cat test/cpuset.cpus.partition | grep -q invalid
RESULT=$?
echo member > test/cpuset.cpus.partition
echo "" > test/cpuset.cpus
[[ $RESULT -eq 0 ]] && skip_test "Child cgroups are using cpuset!"
#
# If isolated CPUs have been reserved at boot time (as shown in
# cpuset.cpus.isolated), these isolated CPUs should be outside of CPUs 0-8
# that will be used by this script for testing purpose. If not, some of
# the tests may fail incorrectly. Wait a bit and retry again just in case
# these isolated CPUs are leftover from previous run and have just been
# cleaned up earlier in this script.
#
# These pre-isolated CPUs should stay in an isolated state throughout the
# testing process for now.
#
BOOT_ISOLCPUS=$(cat $CGROUP2/cpuset.cpus.isolated)
[[ -n "$BOOT_ISOLCPUS" ]] && {
sleep 0.5
BOOT_ISOLCPUS=$(cat $CGROUP2/cpuset.cpus.isolated)
}
if [[ -n "$BOOT_ISOLCPUS" ]]
then
[[ $(echo $BOOT_ISOLCPUS | sed -e "s/[,-].*//") -le 8 ]] &&
skip_test "Pre-isolated CPUs ($BOOT_ISOLCPUS) overlap CPUs to be tested"
echo "Pre-isolated CPUs: $BOOT_ISOLCPUS"
fi
cleanup()
{
online_cpus
cd $CGROUP2
rmdir A1/A2/A3 A1/A2 A1 B1 test/A1 test/B1 test > /dev/null 2>&1
rmdir rtest/p1/c11 rtest/p1/c12 rtest/p2/c21 \
rtest/p2/c22 rtest/p1 rtest/p2 rtest > /dev/null 2>&1
[[ -n "$SCHED_DEBUG" ]] &&
echo "$SCHED_DEBUG" > /sys/kernel/debug/sched/verbose
}
# Pause in ms
pause()
{
DELAY=$1
LOOP=0
while [[ $LOOP -lt $DELAY_FACTOR ]]
do
sleep $DELAY
((LOOP++))
done
return 0
}
console_msg()
{
MSG=$1
echo "$MSG"
echo "" > $CONSOLE
echo "$MSG" > $CONSOLE
pause 0.01
}
test_partition()
{
EXPECTED_VAL=$1
echo $EXPECTED_VAL > cpuset.cpus.partition
[[ $? -eq 0 ]] || exit 1
ACTUAL_VAL=$(cat cpuset.cpus.partition)
[[ $ACTUAL_VAL != $EXPECTED_VAL ]] && {
echo "cpuset.cpus.partition: expect $EXPECTED_VAL, found $ACTUAL_VAL"
echo "Test FAILED"
exit 1
}
}
test_effective_cpus()
{
EXPECTED_VAL=$1
ACTUAL_VAL=$(cat cpuset.cpus.effective)
[[ "$ACTUAL_VAL" != "$EXPECTED_VAL" ]] && {
echo "cpuset.cpus.effective: expect '$EXPECTED_VAL', found '$ACTUAL_VAL'"
echo "Test FAILED"
exit 1
}
}
# Adding current process to cgroup.procs as a test
test_add_proc()
{
OUTSTR="$1"
ERRMSG=$((echo $$ > cgroup.procs) |& cat)
echo $ERRMSG | grep -q "$OUTSTR"
[[ $? -ne 0 ]] && {
echo "cgroup.procs: expect '$OUTSTR', got '$ERRMSG'"
echo "Test FAILED"
exit 1
}
echo $$ > $CGROUP2/cgroup.procs # Move out the task
}
#
# Cpuset controller state transition test matrix.
#
# Cgroup test hierarchy
#
# root
# |
# +------+------+
# | |
# A1 B1
# |
# A2
# |
# A3
#
# P<v> = set cpus.partition (0:member, 1:root, 2:isolated)
# C<l> = add cpu-list to cpuset.cpus
# X<l> = add cpu-list to cpuset.cpus.exclusive
# S<p> = use prefix in subtree_control
# T = put a task into cgroup
# CX<l> = add cpu-list to both cpuset.cpus and cpuset.cpus.exclusive
# O<c>=<v> = Write <v> to CPU online file of <c>
#
# ECPUs - effective CPUs of cpusets
# Pstate - partition root state
# ISOLCPUS - isolated CPUs (<icpus>[,<icpus2>])
#
# Note that if there are 2 fields in ISOLCPUS, the first one is for
# sched-debug matching which includes offline CPUs and single-CPU partitions
# while the second one is for matching cpuset.cpus.isolated.
#
SETUP_A123_PARTITIONS="C1-3:P1:S+ C2-3:P1:S+ C3:P1"
TEST_MATRIX=(
# old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS
# ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ --------
" C0-1 . . C2-3 S+ C4-5 . . 0 A2:0-1"
" C0-1 . . C2-3 P1 . . . 0 "
" C0-1 . . C2-3 P1:S+ C0-1:P1 . . 0 "
" C0-1 . . C2-3 P1:S+ C1:P1 . . 0 "
" C0-1:S+ . . C2-3 . . . P1 0 "
" C0-1:P1 . . C2-3 S+ C1 . . 0 "
" C0-1:P1 . . C2-3 S+ C1:P1 . . 0 "
" C0-1:P1 . . C2-3 S+ C1:P1 . P1 0 "
" C0-1:P1 . . C2-3 C4-5 . . . 0 A1:4-5"
" C0-1:P1 . . C2-3 S+:C4-5 . . . 0 A1:4-5"
" C0-1 . . C2-3:P1 . . . C2 0 "
" C0-1 . . C2-3:P1 . . . C4-5 0 B1:4-5"
"C0-3:P1:S+ C2-3:P1 . . . . . . 0 A1:0-1|A2:2-3|XA2:2-3"
"C0-3:P1:S+ C2-3:P1 . . C1-3 . . . 0 A1:1|A2:2-3|XA2:2-3"
"C2-3:P1:S+ C3:P1 . . C3 . . . 0 A1:|A2:3|XA2:3 A1:P1|A2:P1"
"C2-3:P1:S+ C3:P1 . . C3 P0 . . 0 A1:3|A2:3 A1:P1|A2:P0"
"C2-3:P1:S+ C2:P1 . . C2-4 . . . 0 A1:3-4|A2:2"
"C2-3:P1:S+ C3:P1 . . C3 . . C0-2 0 A1:|B1:0-2 A1:P1|A2:P1"
"$SETUP_A123_PARTITIONS . C2-3 . . . 0 A1:|A2:2|A3:3 A1:P1|A2:P1|A3:P1"
# CPU offlining cases:
" C0-1 . . C2-3 S+ C4-5 . O2=0 0 A1:0-1|B1:3"
"C0-3:P1:S+ C2-3:P1 . . O2=0 . . . 0 A1:0-1|A2:3"
"C0-3:P1:S+ C2-3:P1 . . O2=0 O2=1 . . 0 A1:0-1|A2:2-3"
"C0-3:P1:S+ C2-3:P1 . . O1=0 . . . 0 A1:0|A2:2-3"
"C0-3:P1:S+ C2-3:P1 . . O1=0 O1=1 . . 0 A1:0-1|A2:2-3"
"C2-3:P1:S+ C3:P1 . . O3=0 O3=1 . . 0 A1:2|A2:3 A1:P1|A2:P1"
"C2-3:P1:S+ C3:P2 . . O3=0 O3=1 . . 0 A1:2|A2:3 A1:P1|A2:P2"
"C2-3:P1:S+ C3:P1 . . O2=0 O2=1 . . 0 A1:2|A2:3 A1:P1|A2:P1"
"C2-3:P1:S+ C3:P2 . . O2=0 O2=1 . . 0 A1:2|A2:3 A1:P1|A2:P2"
"C2-3:P1:S+ C3:P1 . . O2=0 . . . 0 A1:|A2:3 A1:P1|A2:P1"
"C2-3:P1:S+ C3:P1 . . O3=0 . . . 0 A1:2|A2: A1:P1|A2:P1"
"C2-3:P1:S+ C3:P1 . . T:O2=0 . . . 0 A1:3|A2:3 A1:P1|A2:P-1"
"C2-3:P1:S+ C3:P1 . . . T:O3=0 . . 0 A1:2|A2:2 A1:P1|A2:P-1"
"$SETUP_A123_PARTITIONS . O1=0 . . . 0 A1:|A2:2|A3:3 A1:P1|A2:P1|A3:P1"
"$SETUP_A123_PARTITIONS . O2=0 . . . 0 A1:1|A2:|A3:3 A1:P1|A2:P1|A3:P1"
"$SETUP_A123_PARTITIONS . O3=0 . . . 0 A1:1|A2:2|A3: A1:P1|A2:P1|A3:P1"
"$SETUP_A123_PARTITIONS . T:O1=0 . . . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P-1|A3:P-1"
"$SETUP_A123_PARTITIONS . . T:O2=0 . . 0 A1:1|A2:3|A3:3 A1:P1|A2:P1|A3:P-1"
"$SETUP_A123_PARTITIONS . . . T:O3=0 . 0 A1:1|A2:2|A3:2 A1:P1|A2:P1|A3:P-1"
"$SETUP_A123_PARTITIONS . T:O1=0 O1=1 . . 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1"
"$SETUP_A123_PARTITIONS . . T:O2=0 O2=1 . 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1"
"$SETUP_A123_PARTITIONS . . . T:O3=0 O3=1 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1"
"$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O1=1 . 0 A1:1|A2:|A3:3 A1:P1|A2:P1|A3:P1"
"$SETUP_A123_PARTITIONS . T:O1=0 O2=0 O2=1 . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P-1|A3:P-1"
# old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS
# ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ --------
#
# Remote partition and cpuset.cpus.exclusive tests
#
" C0-3:S+ C1-3:S+ C2-3 . X2-3 . . . 0 A1:0-3|A2:1-3|A3:2-3|XA1:2-3"
" C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3:P2 . . 0 A1:0-1|A2:2-3|A3:2-3 A1:P0|A2:P2 2-3"
" C0-3:S+ C1-3:S+ C2-3 . X2-3 X3:P2 . . 0 A1:0-2|A2:3|A3:3 A1:P0|A2:P2 3"
" C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2 . 0 A1:0-1|A2:1|A3:2-3 A1:P0|A3:P2 2-3"
" C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:C3 . 0 A1:0-1|A2:1|A3:2-3 A1:P0|A3:P2 2-3"
" C0-3:S+ C1-3:S+ C2-3 C2-3 . . . P2 0 A1:0-3|A2:1-3|A3:2-3|B1:2-3 A1:P0|A3:P0|B1:P-2"
" C0-3:S+ C1-3:S+ C2-3 C4-5 . . . P2 0 B1:4-5 B1:P2 4-5"
" C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2 P2 0 A3:2-3|B1:4 A3:P2|B1:P2 2-4"
" C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2:C1-3 P2 0 A3:2-3|B1:4 A3:P2|B1:P2 2-4"
" C0-3:S+ C1-3:S+ C2-3 C4 X1-3 X1-3:P2 P2 . 0 A2:1|A3:2-3 A2:P2|A3:P2 1-3"
" C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3 X2-3:P2 P2:C4-5 0 A3:2-3|B1:4-5 A3:P2|B1:P2 2-5"
" C4:X0-3:S+ X1-3:S+ X2-3 . . P2 . . 0 A1:4|A2:1-3|A3:1-3 A2:P2 1-3"
" C4:X0-3:S+ X1-3:S+ X2-3 . . . P2 . 0 A1:4|A2:4|A3:2-3 A3:P2 2-3"
# Nested remote/local partition tests
" C0-3:S+ C1-3:S+ C2-3 C4-5 X2-3 X2-3:P1 P2 P1 0 A1:0-1|A2:|A3:2-3|B1:4-5 \
A1:P0|A2:P1|A3:P2|B1:P1 2-3"
" C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3:P1 P2 P1 0 A1:0-1|A2:|A3:2-3|B1:4 \
A1:P0|A2:P1|A3:P2|B1:P1 2-4|2-3"
" C0-3:S+ C1-3:S+ C2-3 C4 X2-3 X2-3:P1 . P1 0 A1:0-1|A2:2-3|A3:2-3|B1:4 \
A1:P0|A2:P1|A3:P0|B1:P1"
" C0-3:S+ C1-3:S+ C3 C4 X2-3 X2-3:P1 P2 P1 0 A1:0-1|A2:2|A3:3|B1:4 \
A1:P0|A2:P1|A3:P2|B1:P1 2-4|3"
" C0-4:S+ C1-4:S+ C2-4 . X2-4 X2-4:P2 X4:P1 . 0 A1:0-1|A2:2-3|A3:4 \
A1:P0|A2:P2|A3:P1 2-4|2-3"
" C0-4:S+ C1-4:S+ C2-4 . X2-4 X2-4:P2 X3-4:P1 . 0 A1:0-1|A2:2|A3:3-4 \
A1:P0|A2:P2|A3:P1 2"
" C0-4:X2-4:S+ C1-4:X2-4:S+:P2 C2-4:X4:P1 \
. . X5 . . 0 A1:0-4|A2:1-4|A3:2-4 \
A1:P0|A2:P-2|A3:P-1 ."
" C0-4:X2-4:S+ C1-4:X2-4:S+:P2 C2-4:X4:P1 \
. . . X1 . 0 A1:0-1|A2:2-4|A3:2-4 \
A1:P0|A2:P2|A3:P-1 2-4"
# Remote partition offline tests
" C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:O2=0 . 0 A1:0-1|A2:1|A3:3 A1:P0|A3:P2 2-3"
" C0-3:S+ C1-3:S+ C2-3 . X2-3 X2-3 X2-3:P2:O2=0 O2=1 0 A1:0-1|A2:1|A3:2-3 A1:P0|A3:P2 2-3"
" C0-3:S+ C1-3:S+ C3 . X2-3 X2-3 P2:O3=0 . 0 A1:0-2|A2:1-2|A3: A1:P0|A3:P2 3"
" C0-3:S+ C1-3:S+ C3 . X2-3 X2-3 T:P2:O3=0 . 0 A1:0-2|A2:1-2|A3:1-2 A1:P0|A3:P-2 3|"
# An invalidated remote partition cannot self-recover from hotplug
" C0-3:S+ C1-3:S+ C2 . X2-3 X2-3 T:P2:O2=0 O2=1 0 A1:0-3|A2:1-3|A3:2 A1:P0|A3:P-2 ."
# cpus.exclusive.effective clearing test
" C0-3:S+ C1-3:S+ C2 . X2-3:X . . . 0 A1:0-3|A2:1-3|A3:2|XA1:"
# Invalid to valid remote partition transition test
" C0-3:S+ C1-3 . . . X3:P2 . . 0 A1:0-3|A2:1-3|XA2: A2:P-2 ."
" C0-3:S+ C1-3:X3:P2
. . X2-3 P2 . . 0 A1:0-2|A2:3|XA2:3 A2:P2 3"
# Invalid to valid local partition direct transition tests
" C1-3:S+:P2 X4:P2 . . . . . . 0 A1:1-3|XA1:1-3|A2:1-3:XA2: A1:P2|A2:P-2 1-3"
" C1-3:S+:P2 X4:P2 . . . X3:P2 . . 0 A1:1-2|XA1:1-3|A2:3:XA2:3 A1:P2|A2:P2 1-3"
" C0-3:P2 . . C4-6 C0-4 . . . 0 A1:0-4|B1:4-6 A1:P-2|B1:P0"
" C0-3:P2 . . C4-6 C0-4:C0-3 . . . 0 A1:0-3|B1:4-6 A1:P2|B1:P0 0-3"
# Local partition invalidation tests
" C0-3:X1-3:S+:P2 C1-3:X2-3:S+:P2 C2-3:X3:P2 \
. . . . . 0 A1:1|A2:2|A3:3 A1:P2|A2:P2|A3:P2 1-3"
" C0-3:X1-3:S+:P2 C1-3:X2-3:S+:P2 C2-3:X3:P2 \
. . X4 . . 0 A1:1-3|A2:1-3|A3:2-3|XA2:|XA3: A1:P2|A2:P-2|A3:P-2 1-3"
" C0-3:X1-3:S+:P2 C1-3:X2-3:S+:P2 C2-3:X3:P2 \
. . C4:X . . 0 A1:1-3|A2:1-3|A3:2-3|XA2:|XA3: A1:P2|A2:P-2|A3:P-2 1-3"
# Local partition CPU change tests
" C0-5:S+:P2 C4-5:S+:P1 . . . C3-5 . . 0 A1:0-2|A2:3-5 A1:P2|A2:P1 0-2"
" C0-5:S+:P2 C4-5:S+:P1 . . C1-5 . . . 0 A1:1-3|A2:4-5 A1:P2|A2:P1 1-3"
# cpus_allowed/exclusive_cpus update tests
" C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3 \
. X:C4 . P2 . 0 A1:4|A2:4|XA2:|XA3:|A3:4 \
A1:P0|A3:P-2 ."
" C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3 \
. X1 . P2 . 0 A1:0-3|A2:1-3|XA1:1|XA2:|XA3:|A3:2-3 \
A1:P0|A3:P-2 ."
" C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3 \
. . X3 P2 . 0 A1:0-2|A2:1-2|XA2:3|XA3:3|A3:3 \
A1:P0|A3:P2 3"
" C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3:P2 \
. . X3 . . 0 A1:0-2|A2:1-2|XA2:3|XA3:3|A3:3|XA3:3 \
A1:P0|A3:P2 3"
" C0-3:X2-3:S+ C1-3:X2-3:S+ C2-3:X2-3:P2 \
. X4 . . . 0 A1:0-3|A2:1-3|A3:2-3|XA1:4|XA2:|XA3 \
A1:P0|A3:P-2"
# old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS
# ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ --------
#
# Incorrect change to cpuset.cpus[.exclusive] invalidates partition root
#
# Adding CPUs to partition root that are not in parent's
# cpuset.cpus is allowed, but those extra CPUs are ignored.
"C2-3:P1:S+ C3:P1 . . . C2-4 . . 0 A1:|A2:2-3 A1:P1|A2:P1"
# Taking away all CPUs from parent or itself if there are tasks
# will make the partition invalid.
"C2-3:P1:S+ C3:P1 . . T C2-3 . . 0 A1:2-3|A2:2-3 A1:P1|A2:P-1"
" C3:P1:S+ C3 . . T P1 . . 0 A1:3|A2:3 A1:P1|A2:P-1"
"$SETUP_A123_PARTITIONS . T:C2-3 . . . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P-1|A3:P-1"
"$SETUP_A123_PARTITIONS . T:C2-3:C1-3 . . . 0 A1:1|A2:2|A3:3 A1:P1|A2:P1|A3:P1"
# Changing a partition root to member makes child partitions invalid
"C2-3:P1:S+ C3:P1 . . P0 . . . 0 A1:2-3|A2:3 A1:P0|A2:P-1"
"$SETUP_A123_PARTITIONS . C2-3 P0 . . 0 A1:2-3|A2:2-3|A3:3 A1:P1|A2:P0|A3:P-1"
# cpuset.cpus can contains cpus not in parent's cpuset.cpus as long
# as they overlap.
"C2-3:P1:S+ . . . . C3-4:P1 . . 0 A1:2|A2:3 A1:P1|A2:P1"
# Deletion of CPUs distributed to child cgroup is allowed.
"C0-1:P1:S+ C1 . C2-3 C4-5 . . . 0 A1:4-5|A2:4-5"
# To become a valid partition root, cpuset.cpus must overlap parent's
# cpuset.cpus.
" C0-1:P1 . . C2-3 S+ C4-5:P1 . . 0 A1:0-1|A2:0-1 A1:P1|A2:P-1"
# Enabling partition with child cpusets is allowed
" C0-1:S+ C1 . C2-3 P1 . . . 0 A1:0-1|A2:1 A1:P1"
# A partition root with non-partition root parent is invalid| but it
# can be made valid if its parent becomes a partition root too.
" C0-1:S+ C1 . C2-3 . P2 . . 0 A1:0-1|A2:1 A1:P0|A2:P-2"
" C0-1:S+ C1:P2 . C2-3 P1 . . . 0 A1:0|A2:1 A1:P1|A2:P2 0-1|1"
# A non-exclusive cpuset.cpus change will invalidate partition and its siblings
" C0-1:P1 . . C2-3 C0-2 . . . 0 A1:0-2|B1:2-3 A1:P-1|B1:P0"
" C0-1:P1 . . P1:C2-3 C0-2 . . . 0 A1:0-2|B1:2-3 A1:P-1|B1:P-1"
" C0-1 . . P1:C2-3 C0-2 . . . 0 A1:0-2|B1:2-3 A1:P0|B1:P-1"
# cpuset.cpus can overlap with sibling cpuset.cpus.exclusive but not subsumed by it
" C0-3 . . C4-5 X5 . . . 0 A1:0-3|B1:4-5"
# Child partition root that try to take all CPUs from parent partition
# with tasks will remain invalid.
" C1-4:P1:S+ P1 . . . . . . 0 A1:1-4|A2:1-4 A1:P1|A2:P-1"
" C1-4:P1:S+ P1 . . . C1-4 . . 0 A1|A2:1-4 A1:P1|A2:P1"
" C1-4:P1:S+ P1 . . T C1-4 . . 0 A1:1-4|A2:1-4 A1:P1|A2:P-1"
# Clearing of cpuset.cpus with a preset cpuset.cpus.exclusive shouldn't
# affect cpuset.cpus.exclusive.effective.
" C1-4:X3:S+ C1:X3 . . . C . . 0 A2:1-4|XA2:3"
# cpuset.cpus can contain CPUs that overlap a sibling cpuset with cpus.exclusive
# but creating a local partition out of it is not allowed. Similarly and change
# in cpuset.cpus of a local partition that overlaps sibling exclusive CPUs will
# invalidate it.
" CX1-4:S+ CX2-4:P2 . C5-6 . . . P1 0 A1:1|A2:2-4|B1:5-6|XB1:5-6 \
A1:P0|A2:P2:B1:P1 2-4"
" CX1-4:S+ CX2-4:P2 . C3-6 . . . P1 0 A1:1|A2:2-4|B1:5-6 \
A1:P0|A2:P2:B1:P-1 2-4"
" CX1-4:S+ CX2-4:P2 . C5-6 . . . P1:C3-6 0 A1:1|A2:2-4|B1:5-6 \
A1:P0|A2:P2:B1:P-1 2-4"
# old-A1 old-A2 old-A3 old-B1 new-A1 new-A2 new-A3 new-B1 fail ECPUs Pstate ISOLCPUS
# ------ ------ ------ ------ ------ ------ ------ ------ ---- ----- ------ --------
# Failure cases:
# A task cannot be added to a partition with no cpu
"C2-3:P1:S+ C3:P1 . . O2=0:T . . . 1 A1:|A2:3 A1:P1|A2:P1"
# Changes to cpuset.cpus.exclusive that violate exclusivity rule is rejected
" C0-3 . . C4-5 X0-3 . . X3-5 1 A1:0-3|B1:4-5"
# cpuset.cpus cannot be a subset of sibling cpuset.cpus.exclusive
" C0-3 . . C4-5 X3-5 . . . 1 A1:0-3|B1:4-5"
)
#
# Cpuset controller remote partition test matrix.
#
# Cgroup test hierarchy
#
# root
# |
# rtest (cpuset.cpus.exclusive=1-7)
# |
# +------+------+
# | |
# p1 p2
# +--+--+ +--+--+
# | | | |
# c11 c12 c21 c22
#
# REMOTE_TEST_MATRIX uses the same notational convention as TEST_MATRIX.
# Only CPUs 1-7 should be used.
#
REMOTE_TEST_MATRIX=(
# old-p1 old-p2 old-c11 old-c12 old-c21 old-c22
# new-p1 new-p2 new-c11 new-c12 new-c21 new-c22 ECPUs Pstate ISOLCPUS
# ------ ------ ------- ------- ------- ------- ----- ------ --------
" X1-3:S+ X4-6:S+ X1-2 X3 X4-5 X6 \
. . P2 P2 P2 P2 c11:1-2|c12:3|c21:4-5|c22:6 \
c11:P2|c12:P2|c21:P2|c22:P2 1-6"
" CX1-4:S+ . X1-2:P2 C3 . . \
. . . C3-4 . . p1:3-4|c11:1-2|c12:3-4 \
p1:P0|c11:P2|c12:P0 1-2"
" CX1-4:S+ . X1-2:P2 . . . \
X2-4 . . . . . p1:1,3-4|c11:2 \
p1:P0|c11:P2 2"
" CX1-5:S+ . X1-2:P2 X3-5:P1 . . \
X2-4 . . . . . p1:1,5|c11:2|c12:3-4 \
p1:P0|c11:P2|c12:P1 2"
" CX1-4:S+ . X1-2:P2 X3-4:P1 . . \
. . X2 . . . p1:1|c11:2|c12:3-4 \
p1:P0|c11:P2|c12:P1 2"
# p1 as member, will get its effective CPUs from its parent rtest
" CX1-4:S+ . X1-2:P2 X3-4:P1 . . \
. . X1 CX2-4 . . p1:5-7|c11:1|c12:2-4 \
p1:P0|c11:P2|c12:P1 1"
" CX1-4:S+ X5-6:P1:S+ . . . . \
. . X1-2:P2 X4-5:P1 . X1-7:P2 p1:3|c11:1-2|c12:4:c22:5-6 \
p1:P0|p2:P1|c11:P2|c12:P1|c22:P2 \
1-2,4-6|1-2,5-6"
)
#
# Write to the cpu online file
# $1 - <c>=<v> where <c> = cpu number, <v> value to be written
#
write_cpu_online()
{
CPU=${1%=*}
VAL=${1#*=}
CPUFILE=//sys/devices/system/cpu/cpu${CPU}/online
if [[ $VAL -eq 0 ]]
then
OFFLINE_CPUS="$OFFLINE_CPUS $CPU"
else
[[ -n "$OFFLINE_CPUS" ]] && {
OFFLINE_CPUS=$(echo $CPU $CPU $OFFLINE_CPUS | fmt -1 |\
sort | uniq -u)
}
fi
echo $VAL > $CPUFILE
pause 0.05
}
#
# Set controller state
# $1 - cgroup directory
# $2 - state
# $3 - showerr
#
# The presence of ":" in state means transition from one to the next.
#
set_ctrl_state()
{
TMPMSG=/tmp/.msg_$$
CGRP=$1
STATE=$2
SHOWERR=${3}
CTRL=${CTRL:=$CONTROLLER}
HASERR=0
REDIRECT="2> $TMPMSG"
[[ -z "$STATE" || "$STATE" = '.' ]] && return 0
[[ $VERBOSE -gt 0 ]] && SHOWERR=1
rm -f $TMPMSG
for CMD in $(echo $STATE | sed -e "s/:/ /g")
do
TFILE=$CGRP/cgroup.procs
SFILE=$CGRP/cgroup.subtree_control
PFILE=$CGRP/cpuset.cpus.partition
CFILE=$CGRP/cpuset.cpus
XFILE=$CGRP/cpuset.cpus.exclusive
case $CMD in
S*) PREFIX=${CMD#?}
COMM="echo ${PREFIX}${CTRL} > $SFILE"
eval $COMM $REDIRECT
;;
X*)
CPUS=${CMD#?}
COMM="echo $CPUS > $XFILE"
eval $COMM $REDIRECT
;;
CX*)
CPUS=${CMD#??}
COMM="echo $CPUS > $CFILE; echo $CPUS > $XFILE"
eval $COMM $REDIRECT
;;
C*) CPUS=${CMD#?}
COMM="echo $CPUS > $CFILE"
eval $COMM $REDIRECT
;;
P*) VAL=${CMD#?}
case $VAL in
0) VAL=member
;;
1) VAL=root
;;
2) VAL=isolated
;;
*)
echo "Invalid partition state - $VAL"
exit 1
;;
esac
COMM="echo $VAL > $PFILE"
eval $COMM $REDIRECT
;;
O*) VAL=${CMD#?}
write_cpu_online $VAL
;;
T*) COMM="echo 0 > $TFILE"
eval $COMM $REDIRECT
;;
*) echo "Unknown command: $CMD"
exit 1
;;
esac
RET=$?
[[ $RET -ne 0 ]] && {
[[ -n "$SHOWERR" ]] && {
echo "$COMM"
cat $TMPMSG
}
HASERR=1
}
pause 0.01
rm -f $TMPMSG
done
return $HASERR
}
set_ctrl_state_noerr()
{
CGRP=$1
STATE=$2
[[ -d $CGRP ]] || mkdir $CGRP
set_ctrl_state $CGRP $STATE 1
[[ $? -ne 0 ]] && {
echo "ERROR: Failed to set $2 to cgroup $1!"
exit 1
}
}
online_cpus()
{
[[ -n "OFFLINE_CPUS" ]] && {
for C in $OFFLINE_CPUS
do
write_cpu_online ${C}=1
done
}
}
#
# Remove all the test cgroup directories
#
reset_cgroup_states()
{
echo 0 > $CGROUP2/cgroup.procs
online_cpus
rmdir $RESET_LIST > /dev/null 2>&1
}
dump_states()
{
for DIR in $CGROUP_LIST
do
CPUS=$DIR/cpuset.cpus
ECPUS=$DIR/cpuset.cpus.effective
XCPUS=$DIR/cpuset.cpus.exclusive
XECPUS=$DIR/cpuset.cpus.exclusive.effective
PRS=$DIR/cpuset.cpus.partition
PCPUS=$DIR/.__DEBUG__.cpuset.cpus.subpartitions
ISCPUS=$DIR/cpuset.cpus.isolated
[[ -e $CPUS ]] && echo "$CPUS: $(cat $CPUS)"
[[ -e $XCPUS ]] && echo "$XCPUS: $(cat $XCPUS)"
[[ -e $ECPUS ]] && echo "$ECPUS: $(cat $ECPUS)"
[[ -e $XECPUS ]] && echo "$XECPUS: $(cat $XECPUS)"
[[ -e $PRS ]] && echo "$PRS: $(cat $PRS)"
[[ -e $PCPUS ]] && echo "$PCPUS: $(cat $PCPUS)"
[[ -e $ISCPUS ]] && echo "$ISCPUS: $(cat $ISCPUS)"
done
}
#
# Set the actual cgroup directory into $CGRP_DIR
# $1 - cgroup name
#
set_cgroup_dir()
{
CGRP_DIR=$1
[[ $CGRP_DIR = A2 ]] && CGRP_DIR=A1/A2
[[ $CGRP_DIR = A3 ]] && CGRP_DIR=A1/A2/A3
[[ $CGRP_DIR = c11 ]] && CGRP_DIR=p1/c11
[[ $CGRP_DIR = c12 ]] && CGRP_DIR=p1/c12
[[ $CGRP_DIR = c21 ]] && CGRP_DIR=p2/c21
[[ $CGRP_DIR = c22 ]] && CGRP_DIR=p2/c22
}
#
# Check effective cpus
# $1 - check string, format: <cgroup>:<cpu-list>[|<cgroup>:<cpu-list>]*
#
check_effective_cpus()
{
CHK_STR=$1
for CHK in $(echo $CHK_STR | sed -e "s/|/ /g")
do
set -- $(echo $CHK | sed -e "s/:/ /g")
CGRP=$1
EXPECTED_CPUS=$2
ACTUAL_CPUS=
if [[ $CGRP = X* ]]
then
CGRP=${CGRP#X}
FILE=cpuset.cpus.exclusive.effective
else
FILE=cpuset.cpus.effective
fi
set_cgroup_dir $CGRP
[[ -e $CGRP_DIR/$FILE ]] || return 1
ACTUAL_CPUS=$(cat $CGRP_DIR/$FILE)
[[ $EXPECTED_CPUS = $ACTUAL_CPUS ]] || return 1
done
}
#
# Check cgroup states
# $1 - check string, format: <cgroup>:<state>[|<cgroup>:<state>]*
#
check_cgroup_states()
{
CHK_STR=$1
for CHK in $(echo $CHK_STR | sed -e "s/|/ /g")
do
set -- $(echo $CHK | sed -e "s/:/ /g")
CGRP=$1
EXPECTED_STATE=$2
FILE=
EVAL=$(expr substr $EXPECTED_STATE 2 2)
set_cgroup_dir $CGRP
case $EXPECTED_STATE in
P*) FILE=$CGRP_DIR/cpuset.cpus.partition
;;
*) echo "Unknown state: $EXPECTED_STATE!"
exit 1
;;
esac
ACTUAL_STATE=$(cat $FILE)
case "$ACTUAL_STATE" in
member) VAL=0
;;
root) VAL=1
;;
isolated)
VAL=2
;;
"root invalid"*)
VAL=-1
;;
"isolated invalid"*)
VAL=-2
;;
esac
[[ $EVAL != $VAL ]] && return 1
#
# For root partition, dump sched-domains info to console if
# verbose mode set for manual comparison with sched debug info.
#
[[ $VAL -eq 1 && $VERBOSE -gt 0 ]] && {
DOMS=$(cat $CGRP_DIR/cpuset.cpus.effective)
[[ -n "$DOMS" ]] &&
echo " [$CGRP_DIR] sched-domain: $DOMS" > $CONSOLE
}
done
return 0
}
#
# Get isolated (including offline) CPUs by looking at
# /sys/kernel/debug/sched/domains and cpuset.cpus.isolated control file,
# if available, and compare that with the expected value.
#
# Note that isolated CPUs from the sched/domains context include offline
# CPUs as well as CPUs in non-isolated 1-CPU partition. Those CPUs may
# not be included in the cpuset.cpus.isolated control file which contains
# only CPUs in isolated partitions as well as those that are isolated at
# boot time.
#
# $1 - expected isolated cpu list(s) <isolcpus1>{,<isolcpus2>}
# <isolcpus1> - expected sched/domains value
# <isolcpus2> - cpuset.cpus.isolated value = <isolcpus1> if not defined
#
check_isolcpus()
{
EXPECTED_ISOLCPUS=$1
ISCPUS=${CGROUP2}/cpuset.cpus.isolated
ISOLCPUS=$(cat $ISCPUS)
LASTISOLCPU=
SCHED_DOMAINS=/sys/kernel/debug/sched/domains
if [[ $EXPECTED_ISOLCPUS = . ]]
then
EXPECTED_ISOLCPUS=
EXPECTED_SDOMAIN=
elif [[ $(expr $EXPECTED_ISOLCPUS : ".*|.*") > 0 ]]
then
set -- $(echo $EXPECTED_ISOLCPUS | sed -e "s/|/ /g")
EXPECTED_ISOLCPUS=$2
EXPECTED_SDOMAIN=$1
else
EXPECTED_SDOMAIN=$EXPECTED_ISOLCPUS
fi
#
# Appending pre-isolated CPUs
# Even though CPU #8 isn't used for testing, it can't be pre-isolated
# to make appending those CPUs easier.
#
[[ -n "$BOOT_ISOLCPUS" ]] && {
EXPECTED_ISOLCPUS=${EXPECTED_ISOLCPUS:+${EXPECTED_ISOLCPUS},}${BOOT_ISOLCPUS}
EXPECTED_SDOMAIN=${EXPECTED_SDOMAIN:+${EXPECTED_SDOMAIN},}${BOOT_ISOLCPUS}
}
#
# Check cpuset.cpus.isolated cpumask
#
[[ "$EXPECTED_ISOLCPUS" != "$ISOLCPUS" ]] && {
# Take a 50ms pause and try again
pause 0.05
ISOLCPUS=$(cat $ISCPUS)
}
[[ "$EXPECTED_ISOLCPUS" != "$ISOLCPUS" ]] && return 1
ISOLCPUS=
EXPECTED_ISOLCPUS=$EXPECTED_SDOMAIN
#
# Use the sched domain in debugfs to check isolated CPUs, if available
#
[[ -d $SCHED_DOMAINS ]] || return 0
for ((CPU=0; CPU < $NR_CPUS; CPU++))
do
[[ -n "$(ls ${SCHED_DOMAINS}/cpu$CPU)" ]] && continue
if [[ -z "$LASTISOLCPU" ]]
then
ISOLCPUS=$CPU
LASTISOLCPU=$CPU
elif [[ "$LASTISOLCPU" -eq $((CPU - 1)) ]]
then
echo $ISOLCPUS | grep -q "\<$LASTISOLCPU\$"
if [[ $? -eq 0 ]]
then
ISOLCPUS=${ISOLCPUS}-
fi
LASTISOLCPU=$CPU
else
if [[ $ISOLCPUS = *- ]]
then
ISOLCPUS=${ISOLCPUS}$LASTISOLCPU
fi
ISOLCPUS=${ISOLCPUS},$CPU
LASTISOLCPU=$CPU
fi
done
[[ "$ISOLCPUS" = *- ]] && ISOLCPUS=${ISOLCPUS}$LASTISOLCPU
[[ "$EXPECTED_SDOMAIN" = "$ISOLCPUS" ]]
}
test_fail()
{
TESTNUM=$1
TESTTYPE=$2
ADDINFO=$3
echo "Test $TEST[$TESTNUM] failed $TESTTYPE check!"
[[ -n "$ADDINFO" ]] && echo "*** $ADDINFO ***"
eval echo \${$TEST[$I]}
echo
dump_states
exit 1
}
#
# Check to see if there are unexpected isolated CPUs left beyond the boot
# time isolated ones.
#
null_isolcpus_check()
{
[[ $VERBOSE -gt 0 ]] || return 0
# Retry a few times before printing error
RETRY=0
while [[ $RETRY -lt 8 ]]
do
pause 0.02
check_isolcpus "."
[[ $? -eq 0 ]] && return 0
((RETRY++))
done
echo "Unexpected isolated CPUs: $ISOLCPUS"
dump_states
exit 1
}
#
# Check state transition test result
# $1 - Test number
# $2 - Expected effective CPU values
# $3 - Expected partition states
# $4 - Expected isolated CPUs
#
check_test_results()
{
_NR=$1
_ECPUS="$2"
_PSTATES="$3"
_ISOLCPUS="$4"
[[ -n "$_ECPUS" && "$_ECPUS" != . ]] && {
check_effective_cpus $_ECPUS
[[ $? -ne 0 ]] && test_fail $_NR "effective CPU" \
"Cgroup $CGRP: expected $EXPECTED_CPUS, got $ACTUAL_CPUS"
}
[[ -n "$_PSTATES" && "$_PSTATES" != . ]] && {
check_cgroup_states $_PSTATES
[[ $? -ne 0 ]] && test_fail $_NR states \
"Cgroup $CGRP: expected $EXPECTED_STATE, got $ACTUAL_STATE"
}
# Compare the expected isolated CPUs with the actual ones,
# if available
[[ -n "$_ISOLCPUS" ]] && {
check_isolcpus $_ISOLCPUS
[[ $? -ne 0 ]] && {
[[ -n "$BOOT_ISOLCPUS" ]] && _ISOLCPUS=${_ISOLCPUS},${BOOT_ISOLCPUS}
test_fail $_NR "isolated CPU" \
"Expect $_ISOLCPUS, get $ISOLCPUS instead"
}
}
reset_cgroup_states
#
# Check to see if effective cpu list changes
#
_NEWLIST=$(cat $CGROUP2/cpuset.cpus.effective)
RETRY=0
while [[ $_NEWLIST != $CPULIST && $RETRY -lt 8 ]]
do
# Wait a bit longer & recheck a few times
pause 0.02
((RETRY++))
_NEWLIST=$(cat $CGROUP2/cpuset.cpus.effective)
done
[[ $_NEWLIST != $CPULIST ]] && {
echo "Effective cpus changed to $_NEWLIST after test $_NR!"
exit 1
}
null_isolcpus_check
[[ $VERBOSE -gt 0 ]] && echo "Test $I done."
}
#
# Run cpuset state transition test
# $1 - test matrix name
#
# This test is somewhat fragile as delays (sleep x) are added in various
# places to make sure state changes are fully propagated before the next
# action. These delays may need to be adjusted if running in a slower machine.
#
run_state_test()
{
TEST=$1
CONTROLLER=cpuset
CGROUP_LIST=". A1 A1/A2 A1/A2/A3 B1"
RESET_LIST="A1/A2/A3 A1/A2 A1 B1"
I=0
eval CNT="\${#$TEST[@]}"
reset_cgroup_states
console_msg "Running state transition test ..."
while [[ $I -lt $CNT ]]
do
echo "Running test $I ..." > $CONSOLE
[[ $VERBOSE -gt 1 ]] && {
echo ""
eval echo \${$TEST[$I]}
}
eval set -- "\${$TEST[$I]}"
OLD_A1=$1
OLD_A2=$2
OLD_A3=$3
OLD_B1=$4
NEW_A1=$5
NEW_A2=$6
NEW_A3=$7
NEW_B1=$8
RESULT=$9
ECPUS=${10}
STATES=${11}
ICPUS=${12}
set_ctrl_state_noerr A1 $OLD_A1
set_ctrl_state_noerr A1/A2 $OLD_A2
set_ctrl_state_noerr A1/A2/A3 $OLD_A3
set_ctrl_state_noerr B1 $OLD_B1
RETVAL=0
set_ctrl_state A1 $NEW_A1; ((RETVAL += $?))
set_ctrl_state A1/A2 $NEW_A2; ((RETVAL += $?))
set_ctrl_state A1/A2/A3 $NEW_A3; ((RETVAL += $?))
set_ctrl_state B1 $NEW_B1; ((RETVAL += $?))
[[ $RETVAL -ne $RESULT ]] && test_fail $I result
check_test_results $I "$ECPUS" "$STATES" "$ICPUS"
((I++))
done
echo "All $I tests of $TEST PASSED."
}
#
# Run cpuset remote partition state transition test
# $1 - test matrix name
#
run_remote_state_test()
{
TEST=$1
CONTROLLER=cpuset
[[ -d rtest ]] || mkdir rtest
cd rtest
echo +cpuset > cgroup.subtree_control
echo "1-7" > cpuset.cpus
echo "1-7" > cpuset.cpus.exclusive
CGROUP_LIST=".. . p1 p2 p1/c11 p1/c12 p2/c21 p2/c22"
RESET_LIST="p1/c11 p1/c12 p2/c21 p2/c22 p1 p2"
I=0
eval CNT="\${#$TEST[@]}"
reset_cgroup_states
console_msg "Running remote partition state transition test ..."
while [[ $I -lt $CNT ]]
do
echo "Running test $I ..." > $CONSOLE
[[ $VERBOSE -gt 1 ]] && {
echo ""
eval echo \${$TEST[$I]}
}
eval set -- "\${$TEST[$I]}"
OLD_p1=$1
OLD_p2=$2
OLD_c11=$3
OLD_c12=$4
OLD_c21=$5
OLD_c22=$6
NEW_p1=$7
NEW_p2=$8
NEW_c11=$9
NEW_c12=${10}
NEW_c21=${11}
NEW_c22=${12}
ECPUS=${13}
STATES=${14}
ICPUS=${15}
set_ctrl_state_noerr p1 $OLD_p1
set_ctrl_state_noerr p2 $OLD_p2
set_ctrl_state_noerr p1/c11 $OLD_c11
set_ctrl_state_noerr p1/c12 $OLD_c12
set_ctrl_state_noerr p2/c21 $OLD_c21
set_ctrl_state_noerr p2/c22 $OLD_c22
RETVAL=0
set_ctrl_state p1 $NEW_p1 ; ((RETVAL += $?))
set_ctrl_state p2 $NEW_p2 ; ((RETVAL += $?))
set_ctrl_state p1/c11 $NEW_c11; ((RETVAL += $?))
set_ctrl_state p1/c12 $NEW_c12; ((RETVAL += $?))
set_ctrl_state p2/c21 $NEW_c21; ((RETVAL += $?))
set_ctrl_state p2/c22 $NEW_c22; ((RETVAL += $?))
[[ $RETVAL -ne 0 ]] && test_fail $I result
check_test_results $I "$ECPUS" "$STATES" "$ICPUS"
((I++))
done
cd ..
rmdir rtest
echo "All $I tests of $TEST PASSED."
}
#
# Testing the new "isolated" partition root type
#
test_isolated()
{
cd $CGROUP2/test
echo 2-3 > cpuset.cpus
TYPE=$(cat cpuset.cpus.partition)
[[ $TYPE = member ]] || echo member > cpuset.cpus.partition
console_msg "Change from member to root"
test_partition root
console_msg "Change from root to isolated"
test_partition isolated
console_msg "Change from isolated to member"
test_partition member
console_msg "Change from member to isolated"
test_partition isolated
console_msg "Change from isolated to root"
test_partition root
console_msg "Change from root to member"
test_partition member
#
# Testing partition root with no cpu
#
console_msg "Distribute all cpus to child partition"
echo +cpuset > cgroup.subtree_control
test_partition root
mkdir A1
cd A1
echo 2-3 > cpuset.cpus
test_partition root
test_effective_cpus 2-3
cd ..
test_effective_cpus ""
console_msg "Moving task to partition test"
test_add_proc "No space left"
cd A1
test_add_proc ""
cd ..
console_msg "Shrink and expand child partition"
cd A1
echo 2 > cpuset.cpus
cd ..
test_effective_cpus 3
cd A1
echo 2-3 > cpuset.cpus
cd ..
test_effective_cpus ""
# Cleaning up
console_msg "Cleaning up"
echo $$ > $CGROUP2/cgroup.procs
[[ -d A1 ]] && rmdir A1
null_isolcpus_check
pause 0.05
}
#
# Wait for inotify event for the given file and read it
# $1: cgroup file to wait for
# $2: file to store the read result
#
wait_inotify()
{
CGROUP_FILE=$1
OUTPUT_FILE=$2
$WAIT_INOTIFY $CGROUP_FILE
cat $CGROUP_FILE > $OUTPUT_FILE
}
#
# Test if inotify events are properly generated when going into and out of
# invalid partition state.
#
test_inotify()
{
ERR=0
PRS=/tmp/.prs_$$
cd $CGROUP2/test
[[ -f $WAIT_INOTIFY ]] || {
echo "wait_inotify not found, inotify test SKIPPED."
return
}
pause 0.01
echo 1 > cpuset.cpus
echo 0 > cgroup.procs
echo root > cpuset.cpus.partition
pause 0.01
rm -f $PRS
wait_inotify $PWD/cpuset.cpus.partition $PRS &
pause 0.01
set_ctrl_state . "O1=0"
pause 0.01
check_cgroup_states ".:P-1"
if [[ $? -ne 0 ]]
then
echo "FAILED: Inotify test - partition not invalid"
ERR=1
elif [[ ! -f $PRS ]]
then
echo "FAILED: Inotify test - event not generated"
ERR=1
kill %1
elif [[ $(cat $PRS) != "root invalid"* ]]
then
echo "FAILED: Inotify test - incorrect state"
cat $PRS
ERR=1
fi
online_cpus
echo member > cpuset.cpus.partition
echo 0 > ../cgroup.procs
if [[ $ERR -ne 0 ]]
then
exit 1
else
echo "Inotify test PASSED"
fi
echo member > cpuset.cpus.partition
echo "" > cpuset.cpus
}
trap cleanup 0 2 3 6
run_state_test TEST_MATRIX
run_remote_state_test REMOTE_TEST_MATRIX
test_isolated
test_inotify
echo "All tests PASSED."
Reference in New Issue View Git Blame Copy Permalink