1715 lines
38 KiB
Plaintext
1715 lines
38 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
/*
|
|
* Copyright (C) 2022 MediaTek Inc.
|
|
*/
|
|
/dts-v1/;
|
|
#include "mt8186.dtsi"
|
|
#include <dt-bindings/pinctrl/mt8186-pinfunc.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/input/gpio-keys.h>
|
|
#include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
|
|
|
|
/ {
|
|
aliases {
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
i2c3 = &i2c3;
|
|
i2c5 = &i2c5;
|
|
mmc0 = &mmc0;
|
|
mmc1 = &mmc1;
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@40000000 {
|
|
device_type = "memory";
|
|
/* The size should be filled in by the bootloader. */
|
|
reg = <0 0x40000000 0 0>;
|
|
};
|
|
|
|
backlight_lcd0: backlight-lcd0 {
|
|
compatible = "pwm-backlight";
|
|
pwms = <&pwm0 0 500000>;
|
|
power-supply = <&ppvar_sys>;
|
|
enable-gpios = <&pio 152 0>;
|
|
brightness-levels = <0 1023>;
|
|
num-interpolated-steps = <1023>;
|
|
default-brightness-level = <576>;
|
|
};
|
|
|
|
bt-sco {
|
|
compatible = "linux,bt-sco";
|
|
#sound-dai-cells = <0>;
|
|
};
|
|
|
|
dmic-codec {
|
|
compatible = "dmic-codec";
|
|
#sound-dai-cells = <0>;
|
|
num-channels = <2>;
|
|
wakeup-delay-ms = <50>;
|
|
};
|
|
|
|
gpio_keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pen_eject>;
|
|
|
|
pen_insert: pen-insert-switch {
|
|
label = "Pen Insert";
|
|
/* Insert = low, eject = high */
|
|
gpios = <&pio 18 GPIO_ACTIVE_LOW>;
|
|
wakeup-event-action = <EV_ACT_DEASSERTED>;
|
|
wakeup-source;
|
|
linux,code = <SW_PEN_INSERTED>;
|
|
linux,input-type = <EV_SW>;
|
|
};
|
|
};
|
|
|
|
pp1800_dpbrdg_dx: regulator-pp1800-dpbrdg-dx {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&en_pp1800_dpbrdg>;
|
|
gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
|
|
regulator-name = "pp1800_dpbrdg_dx";
|
|
enable-active-high;
|
|
vin-supply = <&mt6366_vio18_reg>;
|
|
};
|
|
|
|
pp3300_disp_x: regulator-pp3300-disp-x {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&edp_panel_fixed_pins>;
|
|
gpios = <&pio 153 GPIO_ACTIVE_HIGH>;
|
|
regulator-name = "pp3300_disp_x";
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
vin-supply = <&pp3300_z2>;
|
|
};
|
|
|
|
/* system wide LDO 3.3V power rail */
|
|
pp3300_z5: regulator-pp3300-ldo-z5 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3300_ldo_z5";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
/* separately switched 3.3V power rail */
|
|
pp3300_s3: regulator-pp3300-s3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3300_s3";
|
|
/* automatically sequenced by PMIC EXT_PMIC_EN2 */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
vin-supply = <&pp3300_z2>;
|
|
};
|
|
|
|
/* system wide 3.3V power rail */
|
|
pp3300_z2: regulator-pp3300-z2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3300_z2";
|
|
/* EN pin tied to pp4200_z2, which is controlled by EC */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
/* system wide 4.2V power rail */
|
|
pp4200_z2: regulator-pp4200-z2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp4200_z2";
|
|
/* controlled by EC */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <4200000>;
|
|
regulator-max-microvolt = <4200000>;
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
/* system wide switching 5.0V power rail */
|
|
pp5000_z2: regulator-pp5000-z2 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp5000_z2";
|
|
/* controlled by EC */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
/* system wide semi-regulated power rail from battery or USB */
|
|
ppvar_sys: regulator-ppvar-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "ppvar_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
reserved_memory: reserved-memory {
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
ranges;
|
|
|
|
adsp_dma_mem: memory@61000000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0 0x61000000 0 0x100000>;
|
|
no-map;
|
|
};
|
|
|
|
adsp_mem: memory@60000000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0 0x60000000 0 0x1000000>;
|
|
no-map;
|
|
};
|
|
|
|
scp_mem: memory@50000000 {
|
|
compatible = "shared-dma-pool";
|
|
reg = <0 0x50000000 0 0x10a0000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
sound: sound {
|
|
compatible = "mediatek,mt8186-mt6366-rt1019-rt5682s-sound";
|
|
pinctrl-names = "aud_clk_mosi_off",
|
|
"aud_clk_mosi_on",
|
|
"aud_clk_miso_off",
|
|
"aud_clk_miso_on",
|
|
"aud_dat_miso_off",
|
|
"aud_dat_miso_on",
|
|
"aud_dat_mosi_off",
|
|
"aud_dat_mosi_on",
|
|
"aud_gpio_i2s0_off",
|
|
"aud_gpio_i2s0_on",
|
|
"aud_gpio_i2s1_off",
|
|
"aud_gpio_i2s1_on",
|
|
"aud_gpio_i2s2_off",
|
|
"aud_gpio_i2s2_on",
|
|
"aud_gpio_i2s3_off",
|
|
"aud_gpio_i2s3_on",
|
|
"aud_gpio_pcm_off",
|
|
"aud_gpio_pcm_on",
|
|
"aud_gpio_dmic_sec";
|
|
pinctrl-0 = <&aud_clk_mosi_off>;
|
|
pinctrl-1 = <&aud_clk_mosi_on>;
|
|
pinctrl-2 = <&aud_clk_miso_off>;
|
|
pinctrl-3 = <&aud_clk_miso_on>;
|
|
pinctrl-4 = <&aud_dat_miso_off>;
|
|
pinctrl-5 = <&aud_dat_miso_on>;
|
|
pinctrl-6 = <&aud_dat_mosi_off>;
|
|
pinctrl-7 = <&aud_dat_mosi_on>;
|
|
pinctrl-8 = <&aud_gpio_i2s0_off>;
|
|
pinctrl-9 = <&aud_gpio_i2s0_on>;
|
|
pinctrl-10 = <&aud_gpio_i2s1_off>;
|
|
pinctrl-11 = <&aud_gpio_i2s1_on>;
|
|
pinctrl-12 = <&aud_gpio_i2s2_off>;
|
|
pinctrl-13 = <&aud_gpio_i2s2_on>;
|
|
pinctrl-14 = <&aud_gpio_i2s3_off>;
|
|
pinctrl-15 = <&aud_gpio_i2s3_on>;
|
|
pinctrl-16 = <&aud_gpio_pcm_off>;
|
|
pinctrl-17 = <&aud_gpio_pcm_on>;
|
|
pinctrl-18 = <&aud_gpio_dmic_sec>;
|
|
mediatek,adsp = <&adsp>;
|
|
mediatek,platform = <&afe>;
|
|
|
|
audio-routing =
|
|
"Headphone", "HPOL",
|
|
"Headphone", "HPOR",
|
|
"IN1P", "Headset Mic",
|
|
"Speakers", "Speaker",
|
|
"HDMI1", "TX";
|
|
|
|
hs-playback-dai-link {
|
|
link-name = "I2S0";
|
|
dai-format = "i2s";
|
|
mediatek,clk-provider = "cpu";
|
|
codec {
|
|
sound-dai = <&rt5682s 0>;
|
|
};
|
|
};
|
|
|
|
hs-capture-dai-link {
|
|
link-name = "I2S1";
|
|
dai-format = "i2s";
|
|
mediatek,clk-provider = "cpu";
|
|
codec {
|
|
sound-dai = <&rt5682s 0>;
|
|
};
|
|
};
|
|
|
|
spk-share-dai-link {
|
|
link-name = "I2S2";
|
|
mediatek,clk-provider = "cpu";
|
|
};
|
|
|
|
spk-hdmi-playback-dai-link {
|
|
link-name = "I2S3";
|
|
dai-format = "i2s";
|
|
mediatek,clk-provider = "cpu";
|
|
/* RT1019P and IT6505 connected to the same I2S line */
|
|
codec {
|
|
sound-dai = <&it6505dptx>, <&rt1019p>;
|
|
};
|
|
};
|
|
};
|
|
|
|
rt1019p: speaker-codec {
|
|
compatible = "realtek,rt1019p";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&rt1019p_pins_default>;
|
|
#sound-dai-cells = <0>;
|
|
sdb-gpios = <&pio 150 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
usb_p1_vbus: regulator-usb-p1-vbus {
|
|
compatible = "regulator-fixed";
|
|
gpio = <&pio 148 GPIO_ACTIVE_HIGH>;
|
|
regulator-name = "vbus1";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
enable-active-high;
|
|
vin-supply = <&pp5000_z2>;
|
|
};
|
|
|
|
wifi_pwrseq: wifi-pwrseq {
|
|
compatible = "mmc-pwrseq-simple";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_enable_pin>;
|
|
post-power-on-delay-ms = <50>;
|
|
reset-gpios = <&pio 54 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
wifi_wakeup: wifi-wakeup {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wifi_wakeup_pin>;
|
|
|
|
wowlan-event {
|
|
label = "Wake on WiFi";
|
|
gpios = <&pio 7 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WAKEUP>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
};
|
|
|
|
&adsp {
|
|
memory-region = <&adsp_dma_mem>, <&adsp_mem>;
|
|
status = "okay";
|
|
};
|
|
|
|
&afe {
|
|
status = "okay";
|
|
};
|
|
|
|
&cci {
|
|
proc-supply = <&mt6366_vproc12_reg>;
|
|
};
|
|
|
|
&cpu0 {
|
|
proc-supply = <&mt6366_vproc12_reg>;
|
|
};
|
|
|
|
&cpu1 {
|
|
proc-supply = <&mt6366_vproc12_reg>;
|
|
};
|
|
|
|
&cpu2 {
|
|
proc-supply = <&mt6366_vproc12_reg>;
|
|
};
|
|
|
|
&cpu3 {
|
|
proc-supply = <&mt6366_vproc12_reg>;
|
|
};
|
|
|
|
&cpu4 {
|
|
proc-supply = <&mt6366_vproc12_reg>;
|
|
};
|
|
|
|
&cpu5 {
|
|
proc-supply = <&mt6366_vproc12_reg>;
|
|
};
|
|
|
|
&cpu6 {
|
|
proc-supply = <&mt6366_vproc11_reg>;
|
|
};
|
|
|
|
&cpu7 {
|
|
proc-supply = <&mt6366_vproc11_reg>;
|
|
};
|
|
|
|
&dpi {
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&dpi_pins_default>;
|
|
pinctrl-1 = <&dpi_pins_sleep>;
|
|
/* TODO Re-enable after DP to Type-C port muxing can be described */
|
|
status = "disabled";
|
|
};
|
|
|
|
&dpi_out {
|
|
remote-endpoint = <&it6505_in>;
|
|
};
|
|
|
|
&dsi0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gic {
|
|
mediatek,broken-save-restore-fw;
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&mt6366_vgpu_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c0_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
clock-frequency = <400000>;
|
|
i2c-scl-internal-delay-ns = <8000>;
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c2 {
|
|
pinctrl-names = "default";
|
|
/*
|
|
* Trackpad pin put here to work around second source components
|
|
* sharing the pinmux in steelix designs.
|
|
*/
|
|
pinctrl-0 = <&i2c2_pins>, <&trackpad_pin>;
|
|
clock-frequency = <400000>;
|
|
i2c-scl-internal-delay-ns = <10000>;
|
|
status = "okay";
|
|
|
|
trackpad@15 {
|
|
compatible = "elan,ekth3000";
|
|
reg = <0x15>;
|
|
interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
|
|
vcc-supply = <&pp3300_s3>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&i2c3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c3_pins>;
|
|
clock-frequency = <100000>;
|
|
status = "okay";
|
|
|
|
it6505dptx: dp-bridge@5c {
|
|
compatible = "ite,it6505";
|
|
reg = <0x5c>;
|
|
interrupts-extended = <&pio 8 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&it6505_pins>;
|
|
#sound-dai-cells = <0>;
|
|
ovdd-supply = <&mt6366_vsim2_reg>;
|
|
pwr18-supply = <&pp1800_dpbrdg_dx>;
|
|
reset-gpios = <&pio 177 GPIO_ACTIVE_HIGH>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
it6505_in: endpoint {
|
|
link-frequencies = /bits/ 64 <150000000>;
|
|
remote-endpoint = <&dpi_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c5 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2c5_pins>;
|
|
status = "okay";
|
|
|
|
rt5682s: codec@1a {
|
|
compatible = "realtek,rt5682s";
|
|
reg = <0x1a>;
|
|
interrupts-extended = <&pio 17 IRQ_TYPE_EDGE_BOTH>;
|
|
#sound-dai-cells = <1>;
|
|
AVDD-supply = <&mt6366_vio18_reg>;
|
|
DBVDD-supply = <&mt6366_vio18_reg>;
|
|
LDO1-IN-supply = <&mt6366_vio18_reg>;
|
|
MICVDD-supply = <&pp3300_z2>;
|
|
realtek,jd-src = <1>;
|
|
};
|
|
};
|
|
|
|
&mfg0 {
|
|
domain-supply = <&mt6366_vsram_gpu_reg>;
|
|
};
|
|
|
|
&mfg1 {
|
|
domain-supply = <&mt6366_vgpu_reg>;
|
|
};
|
|
|
|
&mipi_tx0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
pinctrl-1 = <&mmc0_pins_uhs>;
|
|
bus-width = <8>;
|
|
max-frequency = <200000000>;
|
|
non-removable;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
supports-cqe;
|
|
no-sd;
|
|
no-sdio;
|
|
cap-mmc-hw-reset;
|
|
hs400-ds-delay = <0x11814>;
|
|
mediatek,hs400-ds-dly3 = <0x14>;
|
|
vmmc-supply = <&mt6366_vemc_reg>;
|
|
vqmmc-supply = <&mt6366_vio18_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc1 {
|
|
pinctrl-names = "default", "state_uhs", "state_eint";
|
|
pinctrl-0 = <&mmc1_pins_default>;
|
|
pinctrl-1 = <&mmc1_pins_uhs>;
|
|
pinctrl-2 = <&mmc1_pins_eint>;
|
|
/delete-property/ interrupts;
|
|
interrupt-names = "msdc", "sdio_wakeup";
|
|
interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
|
|
<&pio 87 IRQ_TYPE_LEVEL_LOW>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
bus-width = <4>;
|
|
max-frequency = <200000000>;
|
|
cap-sd-highspeed;
|
|
sd-uhs-sdr104;
|
|
sd-uhs-sdr50;
|
|
keep-power-in-suspend;
|
|
wakeup-source;
|
|
cap-sdio-irq;
|
|
no-mmc;
|
|
no-sd;
|
|
non-removable;
|
|
vmmc-supply = <&pp3300_s3>;
|
|
vqmmc-supply = <&mt6366_vio18_reg>;
|
|
mmc-pwrseq = <&wifi_pwrseq>;
|
|
status = "okay";
|
|
|
|
bluetooth@2 {
|
|
compatible = "mediatek,mt7921s-bluetooth";
|
|
reg = <2>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_pins_reset>;
|
|
reset-gpios = <&pio 155 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&nor_flash {
|
|
assigned-clock-parents = <&topckgen CLK_TOP_MAINPLL_D7_D4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&nor_pins_default>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <39000000>;
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
/* 185 lines */
|
|
gpio-line-names = "TP",
|
|
"TP",
|
|
"TP",
|
|
"I2S0_HP_DI",
|
|
"I2S3_DP_SPKR_DO",
|
|
"SAR_INT_ODL",
|
|
"BT_WAKE_AP_ODL",
|
|
"WIFI_INT_ODL",
|
|
"DPBRDG_INT_ODL",
|
|
"EDPBRDG_INT_ODL",
|
|
"EC_AP_HPD_OD",
|
|
"TCHPAD_INT_ODL",
|
|
"TCHSCR_INT_1V8_ODL",
|
|
"EC_AP_INT_ODL",
|
|
"EC_IN_RW_ODL",
|
|
"GSC_AP_INT_ODL",
|
|
/* AP_FLASH_WP_L is crossystem ABI. Rev1 schematics call it AP_WP_ODL. */
|
|
"AP_FLASH_WP_L",
|
|
"HP_INT_ODL",
|
|
"PEN_EJECT_OD",
|
|
"WCAM_PWDN_L",
|
|
"WCAM_RST_L",
|
|
"UCAM_SEN_EN",
|
|
"UCAM_RST_L",
|
|
"LTE_RESET_L",
|
|
"LTE_SAR_DETECT_L",
|
|
"I2S2_DP_SPK_MCK",
|
|
"I2S2_DP_SPKR_BCK",
|
|
"I2S2_DP_SPKR_LRCK",
|
|
"I2S2_DP_SPKR_DI (TP)",
|
|
"EN_PP1000_EDPBRDG",
|
|
"EN_PP1800_EDPBRDG",
|
|
"EN_PP3300_EDPBRDG",
|
|
"UART_GSC_TX_AP_RX",
|
|
"UART_AP_TX_GSC_RX",
|
|
"UART_DBGCON_TX_ADSP_RX",
|
|
"UART_ADSP_TX_DBGCON_RX",
|
|
"EN_PP1000_DPBRDG",
|
|
"TCHSCR_REPORT_DISABLE",
|
|
"EN_PP3300_DPBRDG",
|
|
"EN_PP1800_DPBRDG",
|
|
"SPI_AP_CLK_EC",
|
|
"SPI_AP_CS_EC_L",
|
|
"SPI_AP_DO_EC_DI",
|
|
"SPI_AP_DI_EC_DO",
|
|
"SPI_AP_CLK_GSC",
|
|
"SPI_AP_CS_GSC_L",
|
|
"SPI_AP_DO_GSC_DI",
|
|
"SPI_AP_DI_GSC_DO",
|
|
"UART_DBGCON_TX_SCP_RX",
|
|
"UART_SCP_TX_DBGCON_RX",
|
|
"EN_PP1200_CAM_X",
|
|
"EN_PP2800A_VCM_X",
|
|
"EN_PP2800A_UCAM_X",
|
|
"EN_PP2800A_WCAM_X",
|
|
"WLAN_MODULE_RST_L",
|
|
"EN_PP1200_UCAM_X",
|
|
"I2S1_HP_DO",
|
|
"I2S1_HP_BCK",
|
|
"I2S1_HP_LRCK",
|
|
"I2S1_HP_MCK",
|
|
"TCHSCR_RST_1V8_L",
|
|
"SPI_AP_CLK_ROM",
|
|
"SPI_AP_CS_ROM_L",
|
|
"SPI_AP_DO_ROM_DI",
|
|
"SPI_AP_DI_ROM_DO",
|
|
"NC",
|
|
"NC",
|
|
"EMMC_STRB",
|
|
"EMMC_CLK",
|
|
"EMMC_CMD",
|
|
"EMMC_RST_L",
|
|
"EMMC_DATA0",
|
|
"EMMC_DATA1",
|
|
"EMMC_DATA2",
|
|
"EMMC_DATA3",
|
|
"EMMC_DATA4",
|
|
"EMMC_DATA5",
|
|
"EMMC_DATA6",
|
|
"EMMC_DATA7",
|
|
"AP_KPCOL0",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"TP",
|
|
"SDIO_CLK",
|
|
"SDIO_CMD",
|
|
"SDIO_DATA0",
|
|
"SDIO_DATA1",
|
|
"SDIO_DATA2",
|
|
"SDIO_DATA3",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"NC",
|
|
"EDPBRDG_PWREN",
|
|
"BL_PWM_1V8",
|
|
"EDPBRDG_RST_L",
|
|
"MIPI_DPI_CLK",
|
|
"MIPI_DPI_VSYNC",
|
|
"MIPI_DPI_HSYNC",
|
|
"MIPI_DPI_DE",
|
|
"MIPI_DPI_D0",
|
|
"MIPI_DPI_D1",
|
|
"MIPI_DPI_D2",
|
|
"MIPI_DPI_D3",
|
|
"MIPI_DPI_D4",
|
|
"MIPI_DPI_D5",
|
|
"MIPI_DPI_D6",
|
|
"MIPI_DPI_DA7",
|
|
"MIPI_DPI_D8",
|
|
"MIPI_DPI_D9",
|
|
"MIPI_DPI_D10",
|
|
"MIPI_DPI_D11",
|
|
"PCM_BT_CLK",
|
|
"PCM_BT_SYNC",
|
|
"PCM_BT_DI",
|
|
"PCM_BT_DO",
|
|
"JTAG_TMS_TP",
|
|
"JTAG_TCK_TP",
|
|
"JTAG_TDI_TP",
|
|
"JTAG_TDO_TP",
|
|
"JTAG_TRSTN_TP",
|
|
"CLK_24M_WCAM",
|
|
"CLK_24M_UCAM",
|
|
"UCAM_DET_ODL",
|
|
"AP_I2C_EDPBRDG_SCL_1V8",
|
|
"AP_I2C_EDPBRDG_SDA_1V8",
|
|
"AP_I2C_TCHSCR_SCL_1V8",
|
|
"AP_I2C_TCHSCR_SDA_1V8",
|
|
"AP_I2C_TCHPAD_SCL_1V8",
|
|
"AP_I2C_TCHPAD_SDA_1V8",
|
|
"AP_I2C_DPBRDG_SCL_1V8",
|
|
"AP_I2C_DPBRDG_SDA_1V8",
|
|
"AP_I2C_WLAN_SCL_1V8",
|
|
"AP_I2C_WLAN_SDA_1V8",
|
|
"AP_I2C_AUD_SCL_1V8",
|
|
"AP_I2C_AUD_SDA_1V8",
|
|
"AP_I2C_TPM_SCL_1V8",
|
|
"AP_I2C_UCAM_SDA_1V8",
|
|
"AP_I2C_UCAM_SCL_1V8",
|
|
"AP_I2C_UCAM_SDA_1V8",
|
|
"AP_I2C_WCAM_SCL_1V8",
|
|
"AP_I2C_WCAM_SDA_1V8",
|
|
"SCP_I2C_SENSOR_SCL_1V8",
|
|
"SCP_I2C_SENSOR_SDA_1V8",
|
|
"AP_EC_WARM_RST_REQ",
|
|
"AP_XHCI_INIT_DONE",
|
|
"USB3_HUB_RST_L",
|
|
"EN_SPKR",
|
|
"BEEP_ON",
|
|
"AP_EDP_BKLTEN",
|
|
"EN_PP3300_DISP_X",
|
|
"EN_PP3300_SDBRDG_X",
|
|
"BT_KILL_1V8_L",
|
|
"WIFI_KILL_1V8_L",
|
|
"PWRAP_SPI0_CSN",
|
|
"PWRAP_SPI0_CK",
|
|
"PWRAP_SPI0_MO",
|
|
"PWRAP_SPI0_MI",
|
|
"SRCLKENA0",
|
|
"SRCLKENA1",
|
|
"SCP_VREQ_VAO",
|
|
"AP_RTC_CLK32K",
|
|
"AP_PMIC_WDTRST_L",
|
|
"AUD_CLK_MOSI",
|
|
"AUD_SYNC_MOSI",
|
|
"AUD_DAT_MOSI0",
|
|
"AUD_DAT_MOSI1",
|
|
"AUD_CLK_MISO",
|
|
"AUD_SYNC_MISO",
|
|
"AUD_DAT_MISO0",
|
|
"AUD_DAT_MISO1",
|
|
"NC",
|
|
"NC",
|
|
"DPBRDG_PWREN",
|
|
"DPBRDG_RST_L",
|
|
"LTE_W_DISABLE_L",
|
|
"LTE_SAR_DETECT_L",
|
|
"EN_PP3300_LTE_X",
|
|
"LTE_PWR_OFF_L",
|
|
"LTE_RESET_L",
|
|
"TP",
|
|
"TP";
|
|
|
|
aud_clk_mosi_off: aud-clk-mosi-off-pins {
|
|
pins-clk-sync {
|
|
pinmux = <PINMUX_GPIO166__FUNC_GPIO166>,
|
|
<PINMUX_GPIO167__FUNC_GPIO167>;
|
|
input-enable;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
aud_clk_mosi_on: aud-clk-mosi-on-pins {
|
|
pins-clk-sync {
|
|
pinmux = <PINMUX_GPIO166__FUNC_AUD_CLK_MOSI>,
|
|
<PINMUX_GPIO167__FUNC_AUD_SYNC_MOSI>;
|
|
};
|
|
};
|
|
|
|
aud_clk_miso_off: aud-clk-miso-off-pins {
|
|
pins-clk-sync {
|
|
pinmux = <PINMUX_GPIO170__FUNC_GPIO170>,
|
|
<PINMUX_GPIO171__FUNC_GPIO171>;
|
|
input-enable;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
aud_clk_miso_on: aud-clk-miso-on-pins {
|
|
pins-clk-sync {
|
|
pinmux = <PINMUX_GPIO170__FUNC_AUD_CLK_MISO>,
|
|
<PINMUX_GPIO171__FUNC_AUD_SYNC_MISO>;
|
|
};
|
|
};
|
|
|
|
aud_dat_mosi_off: aud-dat-mosi-off-pins {
|
|
pins-dat {
|
|
pinmux = <PINMUX_GPIO168__FUNC_GPIO168>,
|
|
<PINMUX_GPIO169__FUNC_GPIO169>;
|
|
input-enable;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
aud_dat_mosi_on: aud-dat-mosi-on-pins {
|
|
pins-dat {
|
|
pinmux = <PINMUX_GPIO168__FUNC_AUD_DAT_MOSI0>,
|
|
<PINMUX_GPIO169__FUNC_AUD_DAT_MOSI1>;
|
|
};
|
|
};
|
|
|
|
aud_dat_miso_off: aud-dat-miso-off-pins {
|
|
pins-dat {
|
|
pinmux = <PINMUX_GPIO172__FUNC_GPIO172>,
|
|
<PINMUX_GPIO173__FUNC_GPIO173>;
|
|
input-enable;
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
aud_dat_miso_on: aud-dat-miso-on-pins {
|
|
pins-dat {
|
|
pinmux = <PINMUX_GPIO172__FUNC_AUD_DAT_MISO0>,
|
|
<PINMUX_GPIO173__FUNC_AUD_DAT_MISO1>;
|
|
input-schmitt-enable;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
aud_gpio_i2s0_off: aud-gpio-i2s0-off-pins {
|
|
pins-sdata {
|
|
pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
|
|
};
|
|
};
|
|
|
|
aud_gpio_i2s0_on: aud-gpio-i2s0-on-pins {
|
|
pins-sdata {
|
|
pinmux = <PINMUX_GPIO3__FUNC_I2S0_DI>;
|
|
};
|
|
};
|
|
|
|
aud_gpio_i2s1_off: aud-gpio-i2s-off-pins {
|
|
pins-clk-sdata {
|
|
pinmux = <PINMUX_GPIO56__FUNC_GPIO56>,
|
|
<PINMUX_GPIO57__FUNC_GPIO57>,
|
|
<PINMUX_GPIO58__FUNC_GPIO58>,
|
|
<PINMUX_GPIO59__FUNC_GPIO59>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
aud_gpio_i2s1_on: aud-gpio-i2s1-on-pins {
|
|
pins-clk-sdata {
|
|
pinmux = <PINMUX_GPIO56__FUNC_I2S1_DO>,
|
|
<PINMUX_GPIO57__FUNC_I2S1_BCK>,
|
|
<PINMUX_GPIO58__FUNC_I2S1_LRCK>,
|
|
<PINMUX_GPIO59__FUNC_I2S1_MCK>;
|
|
};
|
|
};
|
|
|
|
aud_gpio_i2s2_off: aud-gpio-i2s2-off-pins {
|
|
pins-cmd-dat {
|
|
pinmux = <PINMUX_GPIO26__FUNC_GPIO26>,
|
|
<PINMUX_GPIO27__FUNC_GPIO27>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
aud_gpio_i2s2_on: aud-gpio-i2s2-on-pins {
|
|
pins-clk {
|
|
pinmux = <PINMUX_GPIO26__FUNC_I2S2_BCK>,
|
|
<PINMUX_GPIO27__FUNC_I2S2_LRCK>;
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
aud_gpio_i2s3_off: aud-gpio-i2s3-off-pins {
|
|
pins-sdata {
|
|
pinmux = <PINMUX_GPIO4__FUNC_GPIO4>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
aud_gpio_i2s3_on: aud-gpio-i2s3-on-pins {
|
|
pins-sdata {
|
|
pinmux = <PINMUX_GPIO4__FUNC_I2S3_DO>;
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
aud_gpio_pcm_off: aud-gpio-pcm-off-pins {
|
|
pins-clk-sdata {
|
|
pinmux = <PINMUX_GPIO115__FUNC_GPIO115>,
|
|
<PINMUX_GPIO116__FUNC_GPIO116>,
|
|
<PINMUX_GPIO117__FUNC_GPIO117>,
|
|
<PINMUX_GPIO118__FUNC_GPIO118>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
aud_gpio_pcm_on: aud-gpio-pcm-on-pins {
|
|
pins-clk-sdata {
|
|
pinmux = <PINMUX_GPIO115__FUNC_PCM_CLK>,
|
|
<PINMUX_GPIO116__FUNC_PCM_SYNC>,
|
|
<PINMUX_GPIO117__FUNC_PCM_DI>,
|
|
<PINMUX_GPIO118__FUNC_PCM_DO>;
|
|
};
|
|
};
|
|
|
|
aud_gpio_dmic_sec: aud-gpio-dmic-sec-pins {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO23__FUNC_GPIO23>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
bt_pins_reset: bt-reset-pins {
|
|
pins-bt-reset {
|
|
pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
dpi_pins_sleep: dpi-sleep-pins {
|
|
pins-cmd-dat {
|
|
pinmux = <PINMUX_GPIO103__FUNC_GPIO103>,
|
|
<PINMUX_GPIO104__FUNC_GPIO104>,
|
|
<PINMUX_GPIO105__FUNC_GPIO105>,
|
|
<PINMUX_GPIO106__FUNC_GPIO106>,
|
|
<PINMUX_GPIO107__FUNC_GPIO107>,
|
|
<PINMUX_GPIO108__FUNC_GPIO108>,
|
|
<PINMUX_GPIO109__FUNC_GPIO109>,
|
|
<PINMUX_GPIO110__FUNC_GPIO110>,
|
|
<PINMUX_GPIO111__FUNC_GPIO111>,
|
|
<PINMUX_GPIO112__FUNC_GPIO112>,
|
|
<PINMUX_GPIO113__FUNC_GPIO113>,
|
|
<PINMUX_GPIO114__FUNC_GPIO114>,
|
|
<PINMUX_GPIO101__FUNC_GPIO101>,
|
|
<PINMUX_GPIO100__FUNC_GPIO100>,
|
|
<PINMUX_GPIO102__FUNC_GPIO102>,
|
|
<PINMUX_GPIO99__FUNC_GPIO99>;
|
|
drive-strength = <10>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
dpi_pins_default: dpi-default-pins {
|
|
pins-cmd-dat {
|
|
pinmux = <PINMUX_GPIO103__FUNC_DPI_DATA0>,
|
|
<PINMUX_GPIO104__FUNC_DPI_DATA1>,
|
|
<PINMUX_GPIO105__FUNC_DPI_DATA2>,
|
|
<PINMUX_GPIO106__FUNC_DPI_DATA3>,
|
|
<PINMUX_GPIO107__FUNC_DPI_DATA4>,
|
|
<PINMUX_GPIO108__FUNC_DPI_DATA5>,
|
|
<PINMUX_GPIO109__FUNC_DPI_DATA6>,
|
|
<PINMUX_GPIO110__FUNC_DPI_DATA7>,
|
|
<PINMUX_GPIO111__FUNC_DPI_DATA8>,
|
|
<PINMUX_GPIO112__FUNC_DPI_DATA9>,
|
|
<PINMUX_GPIO113__FUNC_DPI_DATA10>,
|
|
<PINMUX_GPIO114__FUNC_DPI_DATA11>,
|
|
<PINMUX_GPIO101__FUNC_DPI_HSYNC>,
|
|
<PINMUX_GPIO100__FUNC_DPI_VSYNC>,
|
|
<PINMUX_GPIO102__FUNC_DPI_DE>,
|
|
<PINMUX_GPIO99__FUNC_DPI_PCLK>;
|
|
drive-strength = <10>;
|
|
};
|
|
};
|
|
|
|
ec_ap_int: cros-ec-int-pins {
|
|
pins-ec-ap-int-odl {
|
|
pinmux = <PINMUX_GPIO13__FUNC_GPIO13>;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
edp_panel_fixed_pins: edp-panel-fixed-pins {
|
|
pins-vreg-en {
|
|
pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
en_pp1800_dpbrdg: en-pp1800-dpbrdg-pins {
|
|
pins-vreg-en {
|
|
pinmux = <PINMUX_GPIO39__FUNC_GPIO39>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
gsc_int: gsc-int-pins {
|
|
pins-gsc-ap-int-odl {
|
|
pinmux = <PINMUX_GPIO15__FUNC_GPIO15>;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
i2c0_pins: i2c0-pins {
|
|
pins-bus {
|
|
pinmux = <PINMUX_GPIO128__FUNC_SDA0>,
|
|
<PINMUX_GPIO127__FUNC_SCL0>;
|
|
bias-disable;
|
|
drive-strength = <4>;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
i2c1_pins: i2c1-pins {
|
|
pins-bus {
|
|
pinmux = <PINMUX_GPIO130__FUNC_SDA1>,
|
|
<PINMUX_GPIO129__FUNC_SCL1>;
|
|
bias-disable;
|
|
drive-strength = <4>;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
i2c2_pins: i2c2-pins {
|
|
pins-bus {
|
|
pinmux = <PINMUX_GPIO132__FUNC_SDA2>,
|
|
<PINMUX_GPIO131__FUNC_SCL2>;
|
|
bias-disable;
|
|
drive-strength = <4>;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
i2c3_pins: i2c3-pins {
|
|
pins-bus {
|
|
pinmux = <PINMUX_GPIO134__FUNC_SDA3>,
|
|
<PINMUX_GPIO133__FUNC_SCL3>;
|
|
bias-disable;
|
|
drive-strength = <4>;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
i2c5_pins: i2c5-pins {
|
|
pins-bus {
|
|
pinmux = <PINMUX_GPIO138__FUNC_SDA5>,
|
|
<PINMUX_GPIO137__FUNC_SCL5>;
|
|
bias-disable;
|
|
drive-strength = <4>;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
it6505_pins: it6505-pins {
|
|
pins-hpd {
|
|
pinmux = <PINMUX_GPIO10__FUNC_GPIO10>;
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pins-int {
|
|
pinmux = <PINMUX_GPIO8__FUNC_GPIO8>;
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pins-reset {
|
|
pinmux = <PINMUX_GPIO177__FUNC_GPIO177>;
|
|
output-low;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mmc0_pins_default: mmc0-default-pins {
|
|
pins-clk {
|
|
pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins-cmd-dat {
|
|
pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
|
|
<PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
|
|
<PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
|
|
<PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
|
|
<PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
|
|
<PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
|
|
<PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
|
|
<PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
|
|
<PINMUX_GPIO69__FUNC_MSDC0_CMD>;
|
|
input-enable;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
|
|
pins-rst {
|
|
pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
};
|
|
|
|
mmc0_pins_uhs: mmc0-uhs-pins {
|
|
pins-clk {
|
|
pinmux = <PINMUX_GPIO68__FUNC_MSDC0_CLK>;
|
|
drive-strength = <6>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins-cmd-dat {
|
|
pinmux = <PINMUX_GPIO71__FUNC_MSDC0_DAT0>,
|
|
<PINMUX_GPIO72__FUNC_MSDC0_DAT1>,
|
|
<PINMUX_GPIO73__FUNC_MSDC0_DAT2>,
|
|
<PINMUX_GPIO74__FUNC_MSDC0_DAT3>,
|
|
<PINMUX_GPIO75__FUNC_MSDC0_DAT4>,
|
|
<PINMUX_GPIO76__FUNC_MSDC0_DAT5>,
|
|
<PINMUX_GPIO77__FUNC_MSDC0_DAT6>,
|
|
<PINMUX_GPIO78__FUNC_MSDC0_DAT7>,
|
|
<PINMUX_GPIO69__FUNC_MSDC0_CMD>;
|
|
input-enable;
|
|
drive-strength = <6>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
|
|
pins-ds {
|
|
pinmux = <PINMUX_GPIO67__FUNC_MSDC0_DSL>;
|
|
drive-strength = <6>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins-rst {
|
|
pinmux = <PINMUX_GPIO70__FUNC_MSDC0_RSTB>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
};
|
|
|
|
mmc1_pins_default: mmc1-default-pins {
|
|
pins-clk {
|
|
pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
|
|
drive-strength = <6>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins-cmd-dat {
|
|
pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
|
|
<PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
|
|
<PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
|
|
<PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
|
|
<PINMUX_GPIO85__FUNC_MSDC1_CMD>;
|
|
input-enable;
|
|
drive-strength = <6>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
};
|
|
|
|
mmc1_pins_uhs: mmc1-uhs-pins {
|
|
pins-clk {
|
|
pinmux = <PINMUX_GPIO84__FUNC_MSDC1_CLK>;
|
|
drive-strength = <6>;
|
|
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
|
|
};
|
|
|
|
pins-cmd-dat {
|
|
pinmux = <PINMUX_GPIO86__FUNC_MSDC1_DAT0>,
|
|
<PINMUX_GPIO87__FUNC_MSDC1_DAT1>,
|
|
<PINMUX_GPIO88__FUNC_MSDC1_DAT2>,
|
|
<PINMUX_GPIO89__FUNC_MSDC1_DAT3>,
|
|
<PINMUX_GPIO85__FUNC_MSDC1_CMD>;
|
|
input-enable;
|
|
drive-strength = <8>;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
};
|
|
|
|
mmc1_pins_eint: mmc1-eint-pins {
|
|
pins-dat1 {
|
|
pinmux = <PINMUX_GPIO87__FUNC_GPIO87>;
|
|
input-enable;
|
|
bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
|
|
};
|
|
};
|
|
|
|
nor_pins_default: nor-default-pins {
|
|
pins-clk-dat {
|
|
pinmux = <PINMUX_GPIO63__FUNC_SPINOR_IO0>,
|
|
<PINMUX_GPIO61__FUNC_SPINOR_CK>,
|
|
<PINMUX_GPIO64__FUNC_SPINOR_IO1>;
|
|
drive-strength = <6>;
|
|
bias-pull-down;
|
|
};
|
|
|
|
pins-cs-dat {
|
|
pinmux = <PINMUX_GPIO62__FUNC_SPINOR_CS>,
|
|
<PINMUX_GPIO65__FUNC_SPINOR_IO2>,
|
|
<PINMUX_GPIO66__FUNC_SPINOR_IO3>;
|
|
drive-strength = <6>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
pen_eject: pen-eject-pins {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO18__FUNC_GPIO18>;
|
|
input-enable;
|
|
/* External pull-up. */
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pwm0_pin: disp-pwm-pins {
|
|
pins {
|
|
pinmux = <PINMUX_GPIO97__FUNC_DISP_PWM>;
|
|
output-high;
|
|
};
|
|
};
|
|
|
|
rt1019p_pins_default: rt1019p-default-pins {
|
|
pins-sdb {
|
|
pinmux = <PINMUX_GPIO150__FUNC_GPIO150>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
scp_pins: scp-default-pins {
|
|
pins-scp-uart {
|
|
pinmux = <PINMUX_GPIO48__FUNC_TP_URXD2_AO>,
|
|
<PINMUX_GPIO49__FUNC_TP_UTXD2_AO>;
|
|
};
|
|
};
|
|
|
|
spi1_pins: spi1-pins {
|
|
pins-bus {
|
|
pinmux = <PINMUX_GPIO40__FUNC_SPI1_CLK_A>,
|
|
<PINMUX_GPIO41__FUNC_SPI1_CSB_A>,
|
|
<PINMUX_GPIO42__FUNC_SPI1_MO_A>,
|
|
<PINMUX_GPIO43__FUNC_SPI1_MI_A>;
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
spi2_pins: spi2-pins {
|
|
pins-bus {
|
|
pinmux = <PINMUX_GPIO44__FUNC_SPI2_CLK_A>,
|
|
<PINMUX_GPIO45__FUNC_GPIO45>,
|
|
<PINMUX_GPIO46__FUNC_SPI2_MO_A>,
|
|
<PINMUX_GPIO47__FUNC_SPI2_MI_A>;
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
};
|
|
|
|
spmi_pins: spmi-pins {
|
|
pins-bus {
|
|
pinmux = <PINMUX_GPIO183__FUNC_SPMI_SCL>,
|
|
<PINMUX_GPIO184__FUNC_SPMI_SDA>;
|
|
};
|
|
};
|
|
|
|
touchscreen_pins: touchscreen-pins {
|
|
pins-irq {
|
|
pinmux = <PINMUX_GPIO12__FUNC_GPIO12>;
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pins-reset {
|
|
pinmux = <PINMUX_GPIO60__FUNC_GPIO60>;
|
|
output-high;
|
|
};
|
|
|
|
pins-report-sw {
|
|
pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
trackpad_pin: trackpad-default-pins {
|
|
pins-int-n {
|
|
pinmux = <PINMUX_GPIO11__FUNC_GPIO11>;
|
|
input-enable;
|
|
bias-disable; /* pulled externally */
|
|
};
|
|
};
|
|
|
|
wifi_enable_pin: wifi-enable-pins {
|
|
pins-wifi-enable {
|
|
pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
|
|
};
|
|
};
|
|
|
|
wifi_wakeup_pin: wifi-wakeup-pins {
|
|
pins-wifi-wakeup {
|
|
pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
|
|
input-enable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pwm0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pwm0_pin>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pwrap {
|
|
pmic {
|
|
compatible = "mediatek,mt6366", "mediatek,mt6358";
|
|
interrupt-controller;
|
|
interrupts-extended = <&pio 201 IRQ_TYPE_LEVEL_HIGH>;
|
|
#interrupt-cells = <2>;
|
|
|
|
mt6366codec: codec {
|
|
compatible = "mediatek,mt6366-sound", "mediatek,mt6358-sound";
|
|
Avdd-supply = <&mt6366_vaud28_reg>;
|
|
mediatek,dmic-mode = <1>; /* one-wire */
|
|
};
|
|
|
|
mt6366_regulators: regulators {
|
|
compatible = "mediatek,mt6366-regulator", "mediatek,mt6358-regulator";
|
|
vsys-ldo1-supply = <&pp4200_z2>;
|
|
vsys-ldo2-supply = <&pp4200_z2>;
|
|
vsys-ldo3-supply = <&pp4200_z2>;
|
|
vsys-vcore-supply = <&pp4200_z2>;
|
|
vsys-vdram1-supply = <&pp4200_z2>;
|
|
vsys-vgpu-supply = <&pp4200_z2>;
|
|
vsys-vmodem-supply = <&pp4200_z2>;
|
|
vsys-vpa-supply = <&pp4200_z2>;
|
|
vsys-vproc11-supply = <&pp4200_z2>;
|
|
vsys-vproc12-supply = <&pp4200_z2>;
|
|
vsys-vs1-supply = <&pp4200_z2>;
|
|
vsys-vs2-supply = <&pp4200_z2>;
|
|
vs1-ldo1-supply = <&mt6366_vs1_reg>;
|
|
vs2-ldo1-supply = <&mt6366_vdram1_reg>;
|
|
vs2-ldo2-supply = <&mt6366_vs2_reg>;
|
|
vs2-ldo3-supply = <&mt6366_vs2_reg>;
|
|
|
|
vcore {
|
|
regulator-name = "pp0750_dvdd_core";
|
|
regulator-min-microvolt = <550000>;
|
|
regulator-max-microvolt = <800000>;
|
|
regulator-ramp-delay = <6250>;
|
|
regulator-enable-ramp-delay = <200>;
|
|
regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
|
|
MT6397_BUCK_MODE_FORCE_PWM>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vdram1_reg: vdram1 {
|
|
regulator-name = "pp1125_emi_vdd2";
|
|
regulator-min-microvolt = <1125000>;
|
|
regulator-max-microvolt = <1125000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-enable-ramp-delay = <0>;
|
|
regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
|
|
MT6397_BUCK_MODE_FORCE_PWM>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vgpu_reg: vgpu {
|
|
/*
|
|
* Called "ppvar_dvdd_gpu" in the schematic.
|
|
* Called "ppvar_dvdd_vgpu" here to match
|
|
* regulator coupling requirements.
|
|
*/
|
|
regulator-name = "ppvar_dvdd_vgpu";
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <950000>;
|
|
regulator-ramp-delay = <6250>;
|
|
regulator-enable-ramp-delay = <200>;
|
|
regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
|
|
MT6397_BUCK_MODE_FORCE_PWM>;
|
|
regulator-coupled-with = <&mt6366_vsram_gpu_reg>;
|
|
regulator-coupled-max-spread = <10000>;
|
|
};
|
|
|
|
mt6366_vproc11_reg: vproc11 {
|
|
regulator-name = "ppvar_dvdd_proc_bc_mt6366";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-ramp-delay = <6250>;
|
|
regulator-enable-ramp-delay = <200>;
|
|
regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
|
|
MT6397_BUCK_MODE_FORCE_PWM>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vproc12_reg: vproc12 {
|
|
regulator-name = "ppvar_dvdd_proc_lc";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-ramp-delay = <6250>;
|
|
regulator-enable-ramp-delay = <200>;
|
|
regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
|
|
MT6397_BUCK_MODE_FORCE_PWM>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vs1_reg: vs1 {
|
|
regulator-name = "pp2000_vs1";
|
|
regulator-min-microvolt = <2000000>;
|
|
regulator-max-microvolt = <2000000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-enable-ramp-delay = <0>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vs2_reg: vs2 {
|
|
regulator-name = "pp1350_vs2";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <12500>;
|
|
regulator-enable-ramp-delay = <0>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
va12 {
|
|
regulator-name = "pp1200_va12";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-enable-ramp-delay = <270>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vaud28_reg: vaud28 {
|
|
regulator-name = "pp2800_vaud28";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-enable-ramp-delay = <270>;
|
|
};
|
|
|
|
mt6366_vaux18_reg: vaux18 {
|
|
regulator-name = "pp1840_vaux18";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1840000>;
|
|
regulator-enable-ramp-delay = <270>;
|
|
};
|
|
|
|
mt6366_vbif28_reg: vbif28 {
|
|
regulator-name = "pp2800_vbif28";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-enable-ramp-delay = <270>;
|
|
};
|
|
|
|
mt6366_vcn18_reg: vcn18 {
|
|
regulator-name = "pp1800_vcn18_x";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <270>;
|
|
};
|
|
|
|
mt6366_vcn28_reg: vcn28 {
|
|
regulator-name = "pp2800_vcn28_x";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-enable-ramp-delay = <270>;
|
|
};
|
|
|
|
mt6366_vefuse_reg: vefuse {
|
|
regulator-name = "pp1800_vefuse";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <270>;
|
|
};
|
|
|
|
mt6366_vfe28_reg: vfe28 {
|
|
regulator-name = "pp2800_vfe28_x";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-enable-ramp-delay = <270>;
|
|
};
|
|
|
|
mt6366_vemc_reg: vemc {
|
|
regulator-name = "pp3000_vemc";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-enable-ramp-delay = <60>;
|
|
};
|
|
|
|
mt6366_vibr_reg: vibr {
|
|
regulator-name = "pp2800_vibr_x";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-enable-ramp-delay = <60>;
|
|
};
|
|
|
|
mt6366_vio18_reg: vio18 {
|
|
regulator-name = "pp1800_vio18_s3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <2700>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vio28_reg: vio28 {
|
|
regulator-name = "pp2800_vio28_x";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
regulator-enable-ramp-delay = <270>;
|
|
};
|
|
|
|
mt6366_vm18_reg: vm18 {
|
|
regulator-name = "pp1800_emi_vdd1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1840000>;
|
|
regulator-enable-ramp-delay = <325>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vmc_reg: vmc {
|
|
regulator-name = "pp3000_vmc";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-enable-ramp-delay = <60>;
|
|
};
|
|
|
|
mt6366_vmddr_reg: vmddr {
|
|
regulator-name = "pm0750_emi_vmddr";
|
|
regulator-min-microvolt = <700000>;
|
|
regulator-max-microvolt = <750000>;
|
|
regulator-enable-ramp-delay = <325>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vmch_reg: vmch {
|
|
regulator-name = "pp3000_vmch";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
regulator-enable-ramp-delay = <60>;
|
|
};
|
|
|
|
mt6366_vcn33_reg: vcn33 {
|
|
regulator-name = "pp3300_vcn33_x";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-enable-ramp-delay = <270>;
|
|
};
|
|
|
|
vdram2 {
|
|
regulator-name = "pp0600_emi_vddq";
|
|
regulator-min-microvolt = <600000>;
|
|
regulator-max-microvolt = <600000>;
|
|
regulator-enable-ramp-delay = <3300>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vrf12_reg: vrf12 {
|
|
regulator-name = "pp1200_vrf12_x";
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
regulator-enable-ramp-delay = <120>;
|
|
};
|
|
|
|
mt6366_vrf18_reg: vrf18 {
|
|
regulator-name = "pp1800_vrf18_x";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-enable-ramp-delay = <120>;
|
|
};
|
|
|
|
vsim1 {
|
|
regulator-name = "pp1860_vsim1_x";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1860000>;
|
|
regulator-enable-ramp-delay = <540>;
|
|
};
|
|
|
|
mt6366_vsim2_reg: vsim2 {
|
|
regulator-name = "pp2760_vsim2_x";
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2760000>;
|
|
regulator-enable-ramp-delay = <540>;
|
|
};
|
|
|
|
mt6366_vsram_gpu_reg: vsram-gpu {
|
|
regulator-name = "pp0900_dvdd_sram_gpu";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
regulator-ramp-delay = <6250>;
|
|
regulator-enable-ramp-delay = <240>;
|
|
regulator-coupled-with = <&mt6366_vgpu_reg>;
|
|
regulator-coupled-max-spread = <10000>;
|
|
};
|
|
|
|
mt6366_vsram_others_reg: vsram-others {
|
|
regulator-name = "pp0900_dvdd_sram_core";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
regulator-ramp-delay = <6250>;
|
|
regulator-enable-ramp-delay = <240>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vsram_proc11_reg: vsram-proc11 {
|
|
regulator-name = "pp0900_dvdd_sram_bc";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1120000>;
|
|
regulator-ramp-delay = <6250>;
|
|
regulator-enable-ramp-delay = <240>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
mt6366_vsram_proc12_reg: vsram-proc12 {
|
|
regulator-name = "pp0900_dvdd_sram_lc";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1120000>;
|
|
regulator-ramp-delay = <6250>;
|
|
regulator-enable-ramp-delay = <240>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vusb {
|
|
regulator-name = "pp3070_vusb";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3070000>;
|
|
regulator-enable-ramp-delay = <270>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vxo22 {
|
|
regulator-name = "pp2240_vxo22";
|
|
regulator-min-microvolt = <2200000>;
|
|
regulator-max-microvolt = <2240000>;
|
|
regulator-enable-ramp-delay = <120>;
|
|
/* Feeds DCXO internally */
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
rtc {
|
|
compatible = "mediatek,mt6366-rtc", "mediatek,mt6358-rtc";
|
|
};
|
|
};
|
|
};
|
|
|
|
&scp {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&scp_pins>;
|
|
firmware-name = "mediatek/mt8186/scp.img";
|
|
memory-region = <&scp_mem>;
|
|
status = "okay";
|
|
|
|
cros-ec-rpmsg {
|
|
compatible = "google,cros-ec-rpmsg";
|
|
mediatek,rpmsg-name = "cros-ec-rpmsg";
|
|
};
|
|
};
|
|
|
|
&spi1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi1_pins>;
|
|
mediatek,pad-select = <0>;
|
|
status = "okay";
|
|
|
|
cros_ec: ec@0 {
|
|
compatible = "google,cros-ec-spi";
|
|
reg = <0>;
|
|
interrupts-extended = <&pio 13 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ec_ap_int>;
|
|
spi-max-frequency = <1000000>;
|
|
|
|
i2c_tunnel: i2c-tunnel {
|
|
compatible = "google,cros-ec-i2c-tunnel";
|
|
google,remote-bus = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
typec {
|
|
compatible = "google,cros-ec-typec";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
usb_c0: connector@0 {
|
|
compatible = "usb-c-connector";
|
|
reg = <0>;
|
|
label = "left";
|
|
power-role = "dual";
|
|
data-role = "host";
|
|
try-power-role = "source";
|
|
};
|
|
|
|
usb_c1: connector@1 {
|
|
compatible = "usb-c-connector";
|
|
reg = <1>;
|
|
label = "right";
|
|
power-role = "dual";
|
|
data-role = "host";
|
|
try-power-role = "source";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&spi2_pins>;
|
|
cs-gpios = <&pio 45 GPIO_ACTIVE_LOW>;
|
|
mediatek,pad-select = <0>;
|
|
status = "okay";
|
|
|
|
tpm@0 {
|
|
compatible = "google,cr50";
|
|
reg = <0>;
|
|
interrupts-extended = <&pio 15 IRQ_TYPE_EDGE_RISING>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gsc_int>;
|
|
spi-max-frequency = <1000000>;
|
|
};
|
|
};
|
|
|
|
&ssusb0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssusb1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u3phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&u3phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0 {
|
|
vbus-supply = <&pp3300_s3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1 {
|
|
vbus-supply = <&usb_p1_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&watchdog {
|
|
mediatek,reset-by-toprgu;
|
|
};
|
|
|
|
#include <arm/cros-ec-keyboard.dtsi>
|
|
#include <arm/cros-ec-sbs.dtsi>
|