diff --git a/0001-drm-Retry-setting-scanout-buffer-on-failure.patch b/0001-drm-Retry-setting-scanout-buffer-on-failure.patch deleted file mode 100644 index f7db790..0000000 --- a/0001-drm-Retry-setting-scanout-buffer-on-failure.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 5d758194621ae40ef2b2613fd86101652114cbd3 Mon Sep 17 00:00:00 2001 -From: Oleg Solovyov -Date: Wed, 8 Dec 2021 19:15:47 +0300 -Subject: [PATCH] drm: Retry setting scanout buffer on failure - -Plymouth currently assumes that setting the scanout buffer will succeed. -if it fails because of a driver bug or transient failure it should try -again next frame. - -This commit adds that error handling code. ---- - src/plugins/renderers/drm/plugin.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - -diff --git a/src/plugins/renderers/drm/plugin.c b/src/plugins/renderers/drm/plugin.c -index 02e9413..10711c6 100644 ---- a/src/plugins/renderers/drm/plugin.c -+++ b/src/plugins/renderers/drm/plugin.c -@@ -1628,9 +1628,9 @@ reset_scan_out_buffer_if_needed (ply_renderer_backend_t *backend, - return false; - - if (head->scan_out_buffer_needs_reset) { -- ply_renderer_head_set_scan_out_buffer (backend, head, -- head->scan_out_buffer_id); -- head->scan_out_buffer_needs_reset = false; -+ did_reset = ply_renderer_head_set_scan_out_buffer (backend, head, -+ head->scan_out_buffer_id); -+ head->scan_out_buffer_needs_reset = !did_reset; - return true; - } - --- -2.35.1 - diff --git a/0001-ply-device-manager-Revert-Fall-back-to-text-plugin-i.patch b/0001-ply-device-manager-Revert-Fall-back-to-text-plugin-i.patch new file mode 100644 index 0000000..33edf0b --- /dev/null +++ b/0001-ply-device-manager-Revert-Fall-back-to-text-plugin-i.patch @@ -0,0 +1,52 @@ +From 4a8c0a4231d35ac060f41b582596684cfba7c9ae Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Tue, 7 May 2024 12:42:10 +0200 +Subject: [PATCH] ply-device-manager: Revert "Fall back to text plugin if no + renderers installed" + +The drm renderer may fail to open /dev/dri/card# with -ENOENT when trying +to open/probe a simpledrm registered drm device and the open races with +that drm device being removed to be replaced by a new drm device registered +by the native GPU driver (e.g. i915 / amdgpu). + +Switching to text mode immediately when this race gets hit is undesirable, +as it causes text mode on systems where plymouth would run in graphics +mode before. Remove the immediate switch to text mode on -ENOENT. +Delaying the switch to textmode until the timeout as before. + +This reverts commit 03842d5201e4486fe62635c7b470eb94696f985d. + +Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2270030 +--- + src/libply-splash-core/ply-device-manager.c | 8 -------- + 1 file changed, 8 deletions(-) + +diff --git a/src/libply-splash-core/ply-device-manager.c b/src/libply-splash-core/ply-device-manager.c +index 59e579dd..d75ac6c5 100644 +--- a/src/libply-splash-core/ply-device-manager.c ++++ b/src/libply-splash-core/ply-device-manager.c +@@ -52,7 +52,6 @@ + static void create_devices_from_udev (ply_device_manager_t *manager); + #endif + +-static void create_non_graphical_devices (ply_device_manager_t *manager); + static bool create_devices_for_terminal_and_renderer_type (ply_device_manager_t *manager, + const char *device_path, + ply_terminal_t *terminal, +@@ -1102,13 +1101,6 @@ create_devices_for_terminal_and_renderer_type (ply_device_manager_t *manager, + renderer = ply_renderer_new (renderer_type, device_path, terminal); + + if (renderer != NULL && !ply_renderer_open (renderer)) { +- if (errno == ENOENT) { +- ply_trace ("No renderer plugins installed, creating non-graphical devices"); +- ply_renderer_free (renderer); +- create_non_graphical_devices (manager); +- manager->device_timeout_elapsed = true; +- return false; +- } + ply_trace ("could not open renderer for %s", device_path); + ply_renderer_free (renderer); + renderer = NULL; +-- +2.44.0 + diff --git a/0002-Add-support-for-CSI-sequences.patch b/0002-Add-support-for-CSI-sequences.patch deleted file mode 100644 index 0e7e06b..0000000 --- a/0002-Add-support-for-CSI-sequences.patch +++ /dev/null @@ -1,142 +0,0 @@ -From b41e40e065c60e76b9721747492875c3454440dc Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Mateusz=20Pi=C3=B3rkowski?= -Date: Tue, 22 Feb 2022 15:41:49 +0000 -Subject: [PATCH] Add support for CSI sequences - ---- - src/libply-splash-core/ply-keyboard.c | 52 +++++++++++++++++++++++++-- - src/main.c | 2 ++ - src/plugins/renderers/x11/plugin.c | 19 ++++++++++ - 3 files changed, 71 insertions(+), 2 deletions(-) - -diff --git a/src/libply-splash-core/ply-keyboard.c b/src/libply-splash-core/ply-keyboard.c -index b174261..b40e961 100644 ---- a/src/libply-splash-core/ply-keyboard.c -+++ b/src/libply-splash-core/ply-keyboard.c -@@ -48,6 +48,12 @@ - #define KEY_RETURN '\n' - #define KEY_BACKSPACE '\177' - -+#define CSI_SEQUENCE_PREFIX "\033[" -+#define CSI_SEQUENCE_MINIMUM_LENGTH (strlen (CSI_SEQUENCE_PREFIX) + 1) -+ -+#define FUNCTION_KEY_SEQUENCE_PREFIX (CSI_SEQUENCE_PREFIX "[") -+#define FUNCTION_KEY_SEQUENCE_MINIMUM_LENGTH (strlen (FUNCTION_KEY_SEQUENCE_PREFIX) + 1) -+ - typedef void (*ply_keyboard_handler_t) (void *); - - typedef struct -@@ -195,7 +201,11 @@ process_keyboard_input (ply_keyboard_t *keyboard, - wchar_t key; - ply_list_node_t *node; - -- if ((ssize_t) mbrtowc (&key, keyboard_input, character_size, NULL) > 0) { -+ if (keyboard_input[0] == KEY_ESCAPE && character_size >= 2){ -+ /* Escape sequence */ -+ ply_buffer_append_bytes (keyboard->line_buffer, -+ keyboard_input, character_size); -+ } else if ((ssize_t) mbrtowc (&key, keyboard_input, character_size, NULL) > 0) { - switch (key) { - case KEY_CTRL_U: - case KEY_CTRL_W: -@@ -270,8 +280,46 @@ on_key_event (ply_keyboard_t *keyboard, - while (i < size) { - ssize_t character_size; - char *keyboard_input; -+ size_t bytes_left = size - i; -+ -+ /* Control Sequence Introducer sequences -+ */ -+ if(bytes_left >= FUNCTION_KEY_SEQUENCE_MINIMUM_LENGTH && -+ strncmp (bytes + i, FUNCTION_KEY_SEQUENCE_PREFIX, -+ strlen (FUNCTION_KEY_SEQUENCE_PREFIX)) == 0) { -+ /* Special case - CSI [ after which the next character -+ * is a function key -+ */ -+ process_keyboard_input (keyboard, bytes + i, 4); -+ i += 4; -+ continue; -+ } else if(bytes_left >= CSI_SEQUENCE_MINIMUM_LENGTH && /* At least CSI + final byte */ -+ strncmp (bytes + i, CSI_SEQUENCE_PREFIX, -+ strlen (CSI_SEQUENCE_PREFIX)) == 0) { -+ ssize_t csi_seq_size; -+ csi_seq_size = 0; -+ for (size_t j = strlen (CSI_SEQUENCE_PREFIX); j < bytes_left; j++) { -+ if ((bytes[i + j] >= 0x40) && -+ (bytes[i + j] <= 0x7E)) { -+ /* Final byte found */ -+ csi_seq_size = j + 1; -+ break; -+ } -+ /* We presume if we aren't at the final byte, the intermediate -+ * bytes will be in the range 0x20-0x2F, but we don't validate -+ * that, since it's not really clear how invalid sequences should -+ * be handled, and letting them through to the keyboard input -+ * handlers seems just as reasonable as alternatives. -+ */ -+ } -+ if (csi_seq_size == 0) /* No final byte found */ -+ continue; -+ process_keyboard_input (keyboard, bytes + i, csi_seq_size); -+ i += csi_seq_size; -+ continue; -+ } - -- character_size = (ssize_t) ply_utf8_character_get_size (bytes + i, size - i); -+ character_size = (ssize_t) ply_utf8_character_get_size (bytes + i, bytes_left); - - if (character_size < 0) - break; -diff --git a/src/main.c b/src/main.c -index 1cb8f6c..bedab7d 100644 ---- a/src/main.c -+++ b/src/main.c -@@ -1516,6 +1516,8 @@ on_keyboard_input (state_t *state, - ply_buffer_clear (state->entry_buffer); - ply_list_remove_node (state->entry_triggers, node); - free (entry_trigger); -+ } else if (character_size >= 2 && keyboard_input[0] == '\033') { -+ /* Ignore escape sequences */ - } else { - ply_buffer_append_bytes (state->entry_buffer, keyboard_input, character_size); - } -diff --git a/src/plugins/renderers/x11/plugin.c b/src/plugins/renderers/x11/plugin.c -index bfb039a..e7169f3 100644 ---- a/src/plugins/renderers/x11/plugin.c -+++ b/src/plugins/renderers/x11/plugin.c -@@ -61,6 +61,21 @@ - #include "ply-renderer.h" - #include "ply-renderer-plugin.h" - -+static const char *function_key_escape_sequence[] = { -+ "\033[[A", /* F1 */ -+ "\033[[B", /* F2 */ -+ "\033[[C", /* F3 */ -+ "\033[[D", /* F4 */ -+ "\033[[E", /* F5 */ -+ "\033[17~", /* F6 */ -+ "\033[18~", /* F7 */ -+ "\033[19~", /* F8 */ -+ "\033[20~", /* F9 */ -+ "\033[21~", /* F10 */ -+ "\033[22~", /* F11 */ -+ "\033[23~", /* F12 */ -+}; -+ - struct _ply_renderer_head - { - ply_renderer_backend_t *backend; -@@ -482,6 +497,10 @@ on_key_event (GtkWidget *widget, - ply_buffer_append_bytes (input_source->key_buffer, "\033", 1); - } else if (event->keyval == GDK_KEY_BackSpace) { /* Backspace */ - ply_buffer_append_bytes (input_source->key_buffer, "\177", 1); -+ } else if (GDK_KEY_F1 <= event->keyval && -+ GDK_KEY_F12 >= event->keyval) { /* F1-F12 */ -+ const char *key = function_key_escape_sequence[event->keyval - GDK_KEY_F1]; -+ ply_buffer_append_bytes (input_source->key_buffer, key, strlen(key)); - } else { - gchar bytes[7]; - int byte_count; --- -2.35.1 - diff --git a/0003-ply-utils-Reintroduce-ply_string_has_prefix-helper.patch b/0003-ply-utils-Reintroduce-ply_string_has_prefix-helper.patch deleted file mode 100644 index 00c2d9d..0000000 --- a/0003-ply-utils-Reintroduce-ply_string_has_prefix-helper.patch +++ /dev/null @@ -1,50 +0,0 @@ -From ab4238d54813561d3ad0e50684504d67e4c5ba96 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 7 Mar 2022 12:25:56 +0100 -Subject: [PATCH 3/4] ply-utils: Reintroduce ply_string_has_prefix helper - -ply_string_has_prefix was dropped in commit c7965ea19abf ("ply-utils: -Drop unused ply_string_has_prefix helper"). We have a need for this -helper again, so reintroduce it. - -Signed-off-by: Hans de Goede ---- - src/libply/ply-utils.c | 9 +++++++++ - src/libply/ply-utils.h | 1 + - 2 files changed, 10 insertions(+) - -diff --git a/src/libply/ply-utils.c b/src/libply/ply-utils.c -index f90ac40..f457579 100644 ---- a/src/libply/ply-utils.c -+++ b/src/libply/ply-utils.c -@@ -459,6 +459,15 @@ ply_free_string_array (char **array) - free (array); - } - -+bool -+ply_string_has_prefix (const char *str, const char *prefix) -+{ -+ if (str == NULL || prefix == NULL) -+ return false; -+ -+ return strncmp (str, prefix, strlen (prefix)) == 0; -+} -+ - double - ply_get_timestamp (void) - { -diff --git a/src/libply/ply-utils.h b/src/libply/ply-utils.h -index 47bb3f2..7572cca 100644 ---- a/src/libply/ply-utils.h -+++ b/src/libply/ply-utils.h -@@ -85,6 +85,7 @@ bool ply_fd_has_data (int fd); - bool ply_set_fd_as_blocking (int fd); - char **ply_copy_string_array (const char *const *array); - void ply_free_string_array (char **array); -+bool ply_string_has_prefix (const char *str, const char *prefix); - double ply_get_timestamp (void); - - void ply_save_errno (void); --- -2.35.1 - diff --git a/0004-ply-device-manager-Treat-SimpleDRM-drm-devices-as-fb.patch b/0004-ply-device-manager-Treat-SimpleDRM-drm-devices-as-fb.patch deleted file mode 100644 index cc6f541..0000000 --- a/0004-ply-device-manager-Treat-SimpleDRM-drm-devices-as-fb.patch +++ /dev/null @@ -1,94 +0,0 @@ -From 83b385061ccbf5a46ea77f7f12c1c7bfc72a09f2 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Mon, 28 Feb 2022 16:07:11 +0100 -Subject: [PATCH 4/4] ply-device-manager: Treat SimpleDRM drm devices as fbdev - devices - -Simple-framebuffer devices driven by simpledrm lack information -like panel-rotation info and physical size, causing the splash -to briefly render on its side / without HiDPI scaling, switching -to the correct rendering when the native driver loads. - -To avoid this treat simpledrm devices as fbdev devices and only -use them after the timeout. - -Also adds 2 exceptions to this: - -1. If nomodeset is passed on the kernel commandline then no native -drivers will load, so in this case it is best to immediately use -SimpleDRM devices when they are detected. - -2. On some devics the firmware leave the panel black at boot. In this -case it is desirable to show the splash to the user ASAP so that there -is some visual feedback that the device is booting. Add a support for a -"plymouth.use-simpledrm" kernel cmdline option to show the splash -immediately on SimpleDRM devices rather then waiting for the native -driver to load. - -Closes #167 - -Signed-off-by: Hans de Goede ---- - src/libply-splash-core/ply-device-manager.c | 39 +++++++++++++++++++++ - 1 file changed, 39 insertions(+) - -diff --git a/src/libply-splash-core/ply-device-manager.c b/src/libply-splash-core/ply-device-manager.c -index bb548ef..82b89f3 100644 ---- a/src/libply-splash-core/ply-device-manager.c -+++ b/src/libply-splash-core/ply-device-manager.c -@@ -405,6 +405,40 @@ on_drm_udev_add_or_change (ply_device_manager_t *manager, - } - } - -+static bool -+verify_drm_device (struct udev_device *device) -+{ -+ const char *id_path; -+ -+ /* -+ * Simple-framebuffer devices driven by simpledrm lack information -+ * like panel-rotation info and physical size, causing the splash -+ * to briefly render on its side / without HiDPI scaling, switching -+ * to the correct rendering when the native driver loads. -+ * To avoid this treat simpledrm devices as fbdev devices and only -+ * use them after the timeout. -+ */ -+ id_path = udev_device_get_property_value (device, "ID_PATH"); -+ if (!ply_string_has_prefix (id_path, "platform-simple-framebuffer")) -+ return true; /* Not a SimpleDRM device */ -+ -+ /* -+ * With nomodeset, no native drivers will load, so SimpleDRM devices -+ * should be used immediately. -+ */ -+ if (ply_kernel_command_line_has_argument ("nomodeset")) -+ return true; -+ -+ /* -+ * Some firmwares leave the panel black at boot. Allow enabling SimpleDRM -+ * use from the cmdline to show something to the user ASAP. -+ */ -+ if (ply_kernel_command_line_has_argument ("plymouth.use-simpledrm")) -+ return true; -+ -+ return false; -+} -+ - static bool - verify_add_or_change (ply_device_manager_t *manager, - const char *action, -@@ -423,6 +457,11 @@ verify_add_or_change (ply_device_manager_t *manager, - ply_trace ("ignoring since we're already using text splash for local console"); - return false; - } -+ -+ if (!verify_drm_device (device)) { -+ ply_trace ("ignoring since we only handle SimpleDRM devices after timeout"); -+ return false; -+ } - } else { - ply_trace ("ignoring since we only handle subsystem %s devices after timeout", subsystem); - return false; --- -2.35.1 - diff --git a/0005-ply-device-manager-Move-verify_drm_device-higher-up-.patch b/0005-ply-device-manager-Move-verify_drm_device-higher-up-.patch deleted file mode 100644 index b69a8d2..0000000 --- a/0005-ply-device-manager-Move-verify_drm_device-higher-up-.patch +++ /dev/null @@ -1,105 +0,0 @@ -From f775a38aefa3797d3697330aea78b341914e59f5 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Wed, 28 Sep 2022 15:14:00 +0200 -Subject: [PATCH 5/6] ply-device-manager: Move verify_drm_device() higher up in - the file - -Move verify_drm_device() higher up in ply-device-manager.c, this is -a preparation patch for the next patch in this series. - -This is a pure move without any changes to the moved block. - -Signed-off-by: Hans de Goede ---- - src/libply-splash-core/ply-device-manager.c | 68 ++++++++++----------- - 1 file changed, 34 insertions(+), 34 deletions(-) - -diff --git a/src/libply-splash-core/ply-device-manager.c b/src/libply-splash-core/ply-device-manager.c -index cba2425..23b8b37 100644 ---- a/src/libply-splash-core/ply-device-manager.c -+++ b/src/libply-splash-core/ply-device-manager.c -@@ -262,6 +262,40 @@ fb_device_has_drm_device (ply_device_manager_t *manager, - return has_drm_device; - } - -+static bool -+verify_drm_device (struct udev_device *device) -+{ -+ const char *id_path; -+ -+ /* -+ * Simple-framebuffer devices driven by simpledrm lack information -+ * like panel-rotation info and physical size, causing the splash -+ * to briefly render on its side / without HiDPI scaling, switching -+ * to the correct rendering when the native driver loads. -+ * To avoid this treat simpledrm devices as fbdev devices and only -+ * use them after the timeout. -+ */ -+ id_path = udev_device_get_property_value (device, "ID_PATH"); -+ if (!ply_string_has_prefix (id_path, "platform-simple-framebuffer")) -+ return true; /* Not a SimpleDRM device */ -+ -+ /* -+ * With nomodeset, no native drivers will load, so SimpleDRM devices -+ * should be used immediately. -+ */ -+ if (ply_kernel_command_line_has_argument ("nomodeset")) -+ return true; -+ -+ /* -+ * Some firmwares leave the panel black at boot. Allow enabling SimpleDRM -+ * use from the cmdline to show something to the user ASAP. -+ */ -+ if (ply_kernel_command_line_has_argument ("plymouth.use-simpledrm")) -+ return true; -+ -+ return false; -+} -+ - static bool - create_devices_for_udev_device (ply_device_manager_t *manager, - struct udev_device *device) -@@ -404,40 +438,6 @@ on_drm_udev_add_or_change (ply_device_manager_t *manager, - } - } - --static bool --verify_drm_device (struct udev_device *device) --{ -- const char *id_path; -- -- /* -- * Simple-framebuffer devices driven by simpledrm lack information -- * like panel-rotation info and physical size, causing the splash -- * to briefly render on its side / without HiDPI scaling, switching -- * to the correct rendering when the native driver loads. -- * To avoid this treat simpledrm devices as fbdev devices and only -- * use them after the timeout. -- */ -- id_path = udev_device_get_property_value (device, "ID_PATH"); -- if (!ply_string_has_prefix (id_path, "platform-simple-framebuffer")) -- return true; /* Not a SimpleDRM device */ -- -- /* -- * With nomodeset, no native drivers will load, so SimpleDRM devices -- * should be used immediately. -- */ -- if (ply_kernel_command_line_has_argument ("nomodeset")) -- return true; -- -- /* -- * Some firmwares leave the panel black at boot. Allow enabling SimpleDRM -- * use from the cmdline to show something to the user ASAP. -- */ -- if (ply_kernel_command_line_has_argument ("plymouth.use-simpledrm")) -- return true; -- -- return false; --} -- - static bool - verify_add_or_change (ply_device_manager_t *manager, - const char *action, --- -2.37.3 - diff --git a/0006-ply-device-manager-Also-ignore-SimpleDRM-devs-in-col.patch b/0006-ply-device-manager-Also-ignore-SimpleDRM-devs-in-col.patch deleted file mode 100644 index 7608e81..0000000 --- a/0006-ply-device-manager-Also-ignore-SimpleDRM-devs-in-col.patch +++ /dev/null @@ -1,84 +0,0 @@ -From d32a748fe5c24d5cc3b3dd671a045102373dd392 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Wed, 28 Sep 2022 15:16:15 +0200 -Subject: [PATCH 6/6] ply-device-manager: Also ignore SimpleDRM devs in - coldplug enumeration path - -Plymouth has 2 hw discovery paths: -1. Enumerating devices already known by udev at plymouth startup -2. Devices which are hotplugged after startup - -At boot we have udevd which is enumerating hw and plymouthd racing -with each other, which means that plymouthd may discover the new -SimpleDRM device through either 1. or 2. - -Before this patch a check for SimpleDRM was missing from path 1, causing -it to be treated as a normal device instead of being ignored as intended: - -plymouth-debug.log for the simpledrm being enumerated in path 1: - -ply-device-manager.c:344: create_devices_for_subsystem: - found device /sys/devices/platform/simple-framebuffer.0/drm/card0 -ply-device-manager.c:351: create_devices_for_subsystem: - device is initialized -ply-device-manager.c:360: create_devices_for_subsystem: - found node /dev/dri/card0 -ply-device-manager.c:283: create_devices_for_udev_device: - found DRM device /dev/dri/card0 -ply-device-manager.c:885: create_devices_for_terminal_and_rende: - creating devices for /dev/dri/card0 (renderer type: 1) - -plymouth-debug.log for the simpledrm *not* being enumerated in path 1: - -ply-device-manager.c:344: create_devices_for_subsystem: - found device /sys/devices/platform/simple-framebuffer.0/drm/card0 -ply-device-manager.c:367: create_devices_for_subsystem: - it's not initialized - -followed by path 2 enumerating the device very shortly after this: - -ply-device-manager.c:532: on_udev_event: - got add event for device /dev/dri/card0 -ply-device-manager.c:462: verify_add_or_change: - ignoring since we only handle SimpleDRM devices after timeout - -Note how path 2 does correctly ignore SimpleDRM devices, where as -path 1 does not. This commit fixes this by moving the verify_drm_device() -check in to create_devices_for_udev_device() which runs in both paths. - -Link: https://bugzilla.redhat.com/show_bug.cgi?id=2127663 -Reported-by: Michael Catanzaro -Signed-off-by: Hans de Goede ---- - src/libply-splash-core/ply-device-manager.c | 11 +++++------ - 1 file changed, 5 insertions(+), 6 deletions(-) - -diff --git a/src/libply-splash-core/ply-device-manager.c b/src/libply-splash-core/ply-device-manager.c -index 23b8b37..820a282 100644 ---- a/src/libply-splash-core/ply-device-manager.c -+++ b/src/libply-splash-core/ply-device-manager.c -@@ -314,6 +314,10 @@ create_devices_for_udev_device (ply_devi - ply_trace ("device subsystem is %s", subsystem); - - if (subsystem != NULL && strcmp (subsystem, SUBSYSTEM_DRM) == 0) { -+ if (!manager->device_timeout_elapsed && !verify_drm_device (device)) { -+ ply_trace ("ignoring since we only handle SimpleDRM devices after timeout"); -+ return false; -+ } - ply_trace ("found DRM device %s", device_path); - renderer_type = PLY_RENDERER_TYPE_DRM; - } else if (strcmp (subsystem, SUBSYSTEM_FRAME_BUFFER) == 0) { -@@ -457,11 +461,6 @@ verify_add_or_change (ply_device_manager - ply_trace ("ignoring since we're already using text splash for local console"); - return false; - } -- -- if (!verify_drm_device (device)) { -- ply_trace ("ignoring since we only handle SimpleDRM devices after timeout"); -- return false; -- } - } else { - ply_trace ("ignoring since we only handle subsystem %s devices after timeout", subsystem); - return false; --- -2.37.3 diff --git a/plymouth.rpmlintrc b/plymouth.rpmlintrc index 0b26954..a1a1c41 100644 --- a/plymouth.rpmlintrc +++ b/plymouth.rpmlintrc @@ -12,3 +12,5 @@ addFilter("incoherent-logrotate-file") addFilter("obsolete-not-provided plymouth-plugin-throbgress") # Some files are shared between themes addFilter("files-duplicate") +# Some of our packages have no binaries, this is fine +addFilter("no-binary") diff --git a/plymouth.spec b/plymouth.spec index d3fc092..d64d043 100644 --- a/plymouth.spec +++ b/plymouth.spec @@ -18,6 +18,12 @@ Patch: 0001-Revert-src-Hide-console-text-when-splash-is-requeste.patch # https://bugzilla.redhat.com/show_bug.cgi?id=2271337 Patch: 0001-ply-boot-splash-Set-unbuffered-input-when-creating-a.patch +# Revert patch to immediately switch to text mode on first renderer plugin error +# Fixes unwanted text mode when drm-plugin init races with simpledrm unregistration +# https://gitlab.freedesktop.org/plymouth/plymouth/-/merge_requests/319 +# https://bugzilla.redhat.com/show_bug.cgi?id=2270030 +Patch: 0001-ply-device-manager-Revert-Fall-back-to-text-plugin-i.patch + BuildRequires: meson BuildRequires: system-logos BuildRequires: gcc libtool git